Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

58--RECEIVER TRANSMIT,A

Active
SPRPA126RXA67Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicitation, numbered SPRPA126RXA67, issued by the Department of Defense through the Defense Logistics Agency Aviation in Philadelphia, seeks supplies under the NAICS code 334290 for a critical application requiring new and unused items. The response deadline has been extended to September 21, 2026, following an amendment to the original April 2026 due date. Multiple standardized contract clauses apply, including stringent quality requirements mandating ISO9001 or higher, a 365-day warranty for noncomplex supplies with a 45-day defect discovery window, and compliance with Buy American Act provisions along with Free Trade Agreements and Balance of Payments Program certifications. The contractor must adhere to security prohibitions, equal opportunity mandates for veterans and workers with disabilities, small business subcontracting obligations, and cost accounting standards, all under deviation notices effective February 2026. Payment and invoice processing will follow Wide Area Workflow instructions tied to the SPRPA1 contract vehicle, and delivery must comply with FMS shipping directives. The contract also enforces integrity of unit pricing, limitation of liability for high-value items, and prohibits submission of multiple offers. Transportation by sea is permitted, and the contractor must provide royalty and recovered material content information as required. A stop-work order provision is active, and a priority rating notice applies for national defense and energy program use. The offeror must submit annual representations and certifications under a specific deviation, and all offeror information may be released per Navy policy relating to AbilityOne contractors. The place of performance and recipient location are unspecified beyond the headquarters in Philadelphia, PA, and all communications should be directed to the primary point of contact, Mary Lindsay. The solicitation is open without a set-aside designation and is tied to a single competitive acquisition process governed by deviation clauses issued in early 2026.

General Info

DOD seeks suppliers for new receiver transmitters with ISO9001 quality, regulation compliance, deadline September 2026.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

1 update
PhaseSolicitation
Posted

Presolicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||x|ISO9001 or higher||||| STOP-WORK ORDER (AUG 1989)|1|| FMS DELIVERY AND SHIPPING INSTRUCTIONS|3||TAC PE73|N52212.ET| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report (combo)||TBD|SPRPA1|TBD|TBD|TBD|TBD|TBD|||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|365 Days|45 days after discovery of defect||||| SMALL BUSINESS SUBCONTRACTING PLAN (DEV 2026-O0037)(FEB 2026)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1|| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| COST ACCOUNTING STANDARD NOTICES AND CERTIFICATION (DEV 2026-O0006)(FEB 2026)|1|| INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (DEV 2026-O0048)(MAR 2026)|2||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| ONLY ONE OFFER (DEVIATION 2026-O0048)(MAR 2026)|1|| The purpose of this Amendment is to change the Solicitation response date from 23 APR 2026 to 21 SEP 2026. \ CRITICAL APPLICATION ITEM The customer requires new and unused items. \

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
Federal
ACCELEROMETER,MECHA
Solicitation # N0010426QNE28
This solicitation from the Navsup Weapon Systems Support Mech is for the repair of several sonar-related components, including towed arrays, adapter assemblies, and receiving sets. The scope covers the repair of 21 total units across five different National Stock Numbers. The government requires a requested repair turnaround time of 375 days and mandates government-source inspection and acceptance. Contractors must provide unit repair prices, beyond repair prices, and throughput constraints in their quotes. Key compliance requirements include a valid U.S. security clearance per DD Form 254 and strict adherence to mercury-free material standards for use on submarines and surface ships. The government retains an option to order an additional quantity up to 100 percent of the original order for 468 days after the award at the same price. All submissions must be sent via email to the designated point of contact, Rachel Kern.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334290
New
Federal
58--INTERFACE UNIT,COMM, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMB43
The Department of Defense, through Navsup Weapon Systems Support, is initiating a pre-solicitation for the procurement of 10 Interface Units, Comm, identified by NIIN 017000735 and part number 123AV93672-1. This action is intended to be negotiated with a single source under the authority of FAR 6.302-1, with delivery terms set as FOB Origin. Interested parties may submit proposals, quotations, or capability statements to demonstrate their ability to meet the requirement. All submissions must be received within 45 days of the synopsis publication, or 30 days if awarded under an existing Basic Ordering Agreement. The government retains sole discretion in determining whether to proceed with a competitive procurement based on the responses received.
Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334290
New
Federal
58--RECORDER,SIGNAL DAT, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RDA43
NAVSUP Weapon System Support Philadelphia intends to solicit a sole source contract for the repair of 36 signal data recorders for F/A-18 aircraft. The requirement, identified by NSN 7R-5895-013825123-GF and part number 136779-1, is intended for award to DRS Laurel Technologies, the original equipment manufacturer. This sole source determination is based on the fact that the government does not own the necessary technical data or drawings to utilize additional sources. The procurement will be conducted under FAR Part 15 and follows NAICS code 334290 and PSC 5895. Delivery is specified as FOB Origin, and the contract will include Buy American clauses and unique identification requirements. While the government intends to negotiate with the sole source, interested parties may submit capability statements to the contracting officer. The solicitation is expected to be issued around September 29, 2026, with a closing date of October 29, 2026.
Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334290
New
Repair and Modification of Data Entry Joysticks (SFCC)
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334290
New
DIBBS
Directional Coupler Supply (NSN 5985-01-096-5284)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
Supply of Antenna (NSN 5985-01-125-6780)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
Protective Camera Housing Supplier (NSN 5836-01-506-8602)
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
Supply of Electrical Backshells (NSN 5935-01-496-7368)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
Supply of Waveguide Adapters (NSN 5985-01-299-5951)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
Supply of Electromagnetic Relays (NSN 5945-01-320-8143)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
Supply of Radio Frequency–Electromagnetic Panels (NSN 5999-01-653-1605)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
Supply of Isolator, Repeater (NSN 5980015267225)
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 332439
New
Federal
81--CONTAINER,SHIPPING
Solicitation # SPRPA126RVC30
This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.
Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC10
This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.
Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--PUMP,WINDOW WASHER
Solicitation # SPRPA126QUB47
This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 19 days
View Details
NAICS: 336413
New
Federal
15--DOOR,ACCESS,AIRCRAF
Solicitation # SPRPA126QUC06
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--FIRE CONTROL PANEL
Solicitation # SPRPA126QUC04
This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
66--TRANSDUCER,MOTIONAL
Solicitation # SPRPA126QUB95
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--TAXI,NOSE GEAR,AIR
Solicitation # SPRPA126QUC02
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
48--VALVE,CROSS
Solicitation # SPRPA126QUC03
This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC35
This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.
Other Metal Container Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--CABIN TEMPERATURE I
Solicitation # SPRPA126QUB92
This solicitation, identified by NSN 7R-1680-016010190-P8 and reference number 162BL902, is for the procurement of one aircraft component determined to be a commercial item. The acquisition is governed by FAR Part 12 and DFARS 212, requiring that the component be currently in production or previously offered in the commercial marketplace. All submitted items must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. To be considered technically acceptable, offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the item's commerciality, such as price lists or sales history, and ensure the component meets all form, fit, and function requirements. Delivery is FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
NRP,FWD FAIRING ASS
Solicitation # SPRPA126QUB93
This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of NRP FWD Fairing Assemblies. The contract requires that all parts be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Suppliers must be government-approved sources and provide FAA-certified parts accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the source's letterhead to be considered technically acceptable. The agreement mandates compliance with AS/EN/JISQ 9100 quality standards and includes a 12-month warranty for supplies of a noncomplex nature. Payments are to be processed through the Wide Area Workflow system using combined invoice and receiving reports. While IUID is generally required, it is waived for these commercial items per the PMA-290 implementation plan. The solicitation is issued under EAF authority, and responses are due by October 13, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332439
New
Federal
81--NRP,SHIPPING AND ST
Solicitation # SPRPA126RVC02
This solicitation is for the manufacture of plastic containers produced via rotomolding, specifically following drawing 829E001. The contract includes strict quality assurance requirements, including a First Article Test (FAT) involving dimensional inspections, 18-inch free fall drop tests, and pneumatic leak testing. All production units must undergo 100% leak testing and be affixed with a Unique Identification (UID) marking on a nameplate. The contractor is responsible for all tooling, fixtures, and the cost of FAT shipment and repair. Key technical specifications require the use of a specific amount of desiccant per cubic foot and the substitution of alkaline Zinc-Nickel Alloy plating for cadmium. The contract is a total small business set-aside and includes various federal clauses regarding the Buy American Act and the Trade Agreements Act. The current amendment extends the solicitation period to September 23, 2026, to promote competition. New manufacturers must obtain engineering source approval from the design activity and may be subject to pre-award surveys and post-award conferences.
Other Metal Container Manufacturing

POSTED

2 days ago

DEADLINE

in 11 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS