Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CABLE ASSEMBLY, SPECIAL

Active
SPE4A6-26-T-12GLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a special-purpose electrical cable assembly with part number SN-CY004 and NSN 5995-01-721-3229, designated as a critical application item. A total of 152 units are to be delivered FOB origin within 111 days of contract award, with no variance allowed in quantity. Inspection and acceptance are to occur at the manufacturer’s origin, in accordance with MIL-STD-1916 or an equivalent zero-based sampling plan, requiring zero non-conformances unless otherwise stated. All attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. Technical and quality requirements are governed by the DLA Master List, incorporated by reference, and packaging must comply with MIL-STD-2073-1E and DLA-specific standards including proper marking per MIL-STD-129 with no special marking required. The product must be palletized and prepared for shipment using approved methods, with unit packaging coded as E5 and intermediate containment also E5. The delivery destination is the DLA Distribution San Joaquin warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000, and transportation logistics follow DLA procedural notes C19 and C20. The original required delivery date is December 30, 2026, with a need ship date of December 2, 2026. The contract was issued under solicitation SPE4A6-26-T-12GL, with a unit price of $152.00 per item, resulting in a total contract value of $23,104.00. The contract is governed by federal acquisition regulations and applies to the Department of Defense’s ASC Commodities Division, with point of contact Gloria Frimpong for inquiries. The NAICS code 335931 identifies the industry classification, and the unit of issue is each (EA), consistent with DLA standards.

General Info

152 special cable assemblies for WOSB only, due August 12, 2026, via SAM.gov, DLA Aviation procurement.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12GL.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
GLORIA FRIMPONG
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICA
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CABLE ASSEMBLY,SPEC
CRITICAL APPLICATION ITEM
SUPPLYNET, INC. 1HJX9 P/N SN-CY004
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741523 0001 EA 152.000
NSN/MATERIAL:5995017213229
SPE4A6-26-T-12GL
SECTION B
PR: 7017741523 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0111
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/02/2026 Original Required Delivery Date:12/30/2026
SPE4A6-26-T-12GL NSN/Part Number: 5995-01-721-3229 Quantity: 152 EA Purchase Request: 7017741523QTY: 152 Delivery: 111 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
SPLICE, CONDUCTOR
Solicitation # SPE4A7-26-T-612L
This contract pertains to the procurement of a splice conductor, identified by NSN 5940-01-508-4846 and part number SO63-3-55-20-90, with a quantity of 417 units, each priced at $417.00 for a total value of $173,889. The item must be delivered FOB origin within 171 days, with an original required delivery date of December 31, 2026, and a needed ship date of January 31, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and physical identification marking must conform to RQ017. Packaging must adhere to ASTM D3951, but only to the extent not superseded by DLA requirements; all packaging and labeling must follow MIL-STD-129. Palletization must meet RP001 DLA Packaging Requirements. The unit of issue is each, with no variance allowed in quantity. Inspection and acceptance occur at destination. All items must be cleared of government identification if not accepted. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20. Deliveries are to be made to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The procurement was issued under solicitation SPE4A7-26-T-612L with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier Operations AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE4A5-26-T-322K
This contract pertains to the procurement of an electrical contact component, identified by NSN 5999-01-194-1648 and part number 790-1613-001, with a quantity of 197 units, under solicitation SPE4A5-26-T-322K. The item is classified as a critical application item supplied by Rockwell Collins, Inc., and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede any other standards unless explicitly overridden by the contract. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise specified, and attributes must be verified at assigned levels VII, IV, and II for critical, major, and minor characteristics respectively. The unit of issue is each (EA), priced at $197.00 per unit, with a total contract value reflecting this quantity. The product must be delivered FOB origin within 171 days from contract award, with inspection and acceptance occurring at the destination. Packaging must follow DLA-specific requirements: if hazardous under FED-STD-313, it must meet TQ requirement IP025; if non-hazardous, it must comply with ASTM D3951, though DLA requirements take precedence. All packaging and labeling must conform to MIL-STD-129 and be palletized per RP001. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is January 31, 2027, with an original delivery deadline of January 31, 2028. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under NAICS code 335931, managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Francis Polakiewicz as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADIO FREQUENCY
Solicitation # SPE4A6-26-R-XC25
The contract solicitation SPE4A6-26-R-XC25 is for the procurement of 10 units of a Radio Frequency Cable Assembly, identified by NSN 5995-01-472-7518 and manufacturer part number AE12435-408-101 from Times Microwave Systems, Inc. This is an Indefinite Delivery Purchase Order with a five-year base period, subject to a total contract value cap of $350,000, with a guaranteed minimum quantity of 5 units per year and a maximum order limit of 10 units per year. Pricing is Firm Fixed Price with zero variance allowed, and delivery is required within 233 calendar days from the award date under FOB Origin terms, with final delivery to various CONUS stock locations specified per individual order. The item must comply with DLA’s packaging and marking standards including MIL-STD-2073-1E with QUP 001, PRES MTHD 10, CLNG/DRY 1, and specific container and palletization requirements per RP001, with labeling adhering to MIL-STD-129 and special markings indicating “Product Verification Test Samples – Do Not Post to Stock.” Sampling for inspection must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Inspection and acceptance occur at destination, governed by FAR 52.246-2, and the contractor must maintain all inspection records. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and Safety Data Sheets compliant with 29 CFR 1910.1200(g) and Federal Standard No. 313 must be submitted prior to award. The contract requires compliance with FAR-covered defense telecommunications representations, cybersecurity maturity model certification (CMMC) Level 2 self-assessment, and removal of government identification from non-accepted supplies. All offers must be submitted electronically through DIBBS or by email to the designated point of contact, and the contractor must register with DIBBS to receive electronic delivery orders and comply with Wide Area Workflow for invoicing. Offerors are
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-325W
The contract pertains to the procurement of a wiring harness, part number 901-076-575-111, identified by NSN 5995-01-652-5926, with a quantity of eleven units to be delivered FOB origin within 171 days of award. The item is governed by stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and covered defense information protocols apply. The contractor must adhere to DLA packaging standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Physical identification marking is mandated, but unit-level item identification is waived per customer request. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Palletization and packaging must meet RP001 DLA requirements, and delivery is directed to DLA Distribution Cherry Point in North Carolina. The contract is issued under solicitation SPE4A5-26-T-325W with a response deadline in August 2026 and a required delivery date of March 21, 2029, under a sole-source arrangement for Bell Textron Inc. and Bell Boeing Joint Project Office.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12HW
The contract is for a single unit of a special-purpose electrical cable assembly with NSN 5995-01-658-2644 and part number ABC60568, supplied by GLANAIR, INC. Delivery is required within 171 days to the Defense Logistics Agency distribution center in Tracy, California, under FOB origin terms with zero variance allowed on quantity. The item must comply with MIL-STD-2073-1E packaging standards, including preservation methods, material specifications, and marking requirements per MIL-STD-129, with no special marking codes applied. Physical identification and bare item marking are required, and mercury or mercury compounds are strictly prohibited in any preservation, packaging, or marking processes. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination. Cybersecurity compliance requires a CMMC Level 2 self-assessment. Covered Defense Information applies, and the contract incorporates technical and quality requirements from the DLA Master List. The unit of issue is each (EA), and the procurement is under solicitation SPE4A6-26-T-12HW, with an original delivery deadline of July 4, 2027, and a required ship date of January 31, 2027. No item unique identification is required per the service customer’s request.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-12JB
The contract pertains to the procurement of eight cable assemblies for radio frequency applications, identified by part number N165974-1 and NSN 5995-01-696-2426, under solicitation SPE4A6-26-T-12JB. The items must comply with a comprehensive set of technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specifications for physical identification, packaging, inspection, and testing. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and must exclude mercury or mercury compounds in preservation or packaging. The contractor is required to meet a zero-defect acceptance standard under MIL-STD-1916 or comparable zero-based sampling plans, with all unspecified attributes treated as major and inspected at designated verification levels. Unit of issue is each, with no variance allowed in quantity, and delivery is FOB origin to the designated receiving warehouse in Tracy, California, with a required delivery date of September 12, 2027, and a need ship date of January 31, 2027. Item Unique Identification is not mandated per the Service customer’s request, and all measuring and test equipment used must meet defined standards. The contract is governed by DLA packaging and quality procedures, with inspection and acceptance occurring at the destination, and transportation logistics must follow DLAD procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12FF
This contract is for a special-purpose electrical cable assembly with part number USBG-36FTAB and NSN 5995016619031, requiring delivery of 74 units under solicitation SPE4A6-26-T-12FF. The cable assembly must adhere to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging guidelines, including specific preservation methods, packaging materials, and unit container specifications, while marking follows MIL-STD-129 with no special marking required. The product shall be palletized according to DLA standards and shipped FOB origin to the designated delivery point at the DLA Distribution Center in New Cumberland, Pennsylvania, with delivery due in 171 days from the contract award, targeting a required ship date of January 31, 2027. Inspection and acceptance occur at destination, and sampling for quality verification must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; any unspecified attributes are treated as major with zero non-conformances required unless otherwise stated. The purchase unit is each, priced at $74.00, totaling $5,476.00, with no variance permitted in quantity. The contract is managed by the ASC Commodities Division under the Department of Defense, and the point of contact is Ashley Sheppard.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367G
This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-12FQ
The contract is for one unit of a cable assembly designated by NSN 5995-01-682-3931, with a delivery requirement of 171 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless overridden by an amendment. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the service customer’s request, in accordance with DFARS 252.211-7003(c)(1)(i). The cable assembly contains technical data subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and the DLA questionnaire. The solicitation number is SPE4A6-26-T-12FQ, posted on August 4, 2026, with responses due by August 12, 2026. It is categorized under NAICS 335931 and issued by the Department of Defense’s ASC Commodities Division, with performance taking place in New Cumberland, Pennsylvania. Primary point of contact is Amanda Thomas, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-26-T-366U
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367H
The contract specifies the procurement of two electrical connector covers, part number 660-012NF11U6-102 with NSN 5935-01-550-0680, under solicitation SPE7M5-26-T-367H, with a total value of $2.00 per unit for a quantity of two. Delivery is required within 20 days to a destination address in Iwakuni, Japan, under FOB destination terms with no allowance for variance in quantity. All items must comply with DLA’s Master List of Technical and Quality Requirements referenced by R or I numbers, which take precedence over commercial packaging standards. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, and if non-hazardous, conform to ASTM D3951 only if not superseded by DLA requirements. Hazardous materials must meet TQ requirement IP025. Items must be marked per RQ017 for physical identification, and any non-accepted supplies must have government identification removed as per RQ011. The unit of issue is each, palletization must follow DLA standards, and shipping instructions include specific transportation procedures referenced in DLAD PROC NOTES C19 and C20. The required delivery date is July 30, 2026, and the point of contact is Margaret Smith of the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12JF
The contract is for the procurement of two special-purpose electrical cable assemblies with the NSN 5995-01-721-1947, under solicitation SPE4A6-26-T-12JF, with a response deadline of August 12, 2026, and a delivery requirement of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is subject to stringent cybersecurity requirements, mandating that the supplier be certified by a CMMC Level 2 C3PAO and comply with covered defense information protocols. Technical data associated with the cable assembly is controlled under ITAR or EAR, restricting export and disclosure to authorized personnel only, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training on export-controlled data handling, and formal approval by the DLA controlling authority. The place of performance is Tracy, California, with primary point of contact Marcita Robinson from the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)
Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details