59 -- Cat5 Cables

Amendment 0002 Effective 29Jul17. The purpose of this amendment is to correct Line 0002 description to C62304-09 23- 4/PR CAT6 WHITE SOLID 80,000 Foot Thank you for your quote. -------------------------------------------------------------------------------- -------------- Amendment 0001 Effective 18July2017 The purpose of this amendment is to remove or disregard the attached document, echnical specifications and description contents of the document is already incorporated in the solicitation. -------------------------------------------------------------------------------- ----------- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Competitive quotes are being requested under Request for Quote (RFQ) # N66001-17-Q- 6766. The NAICS code applicable to this acquisition is 331318 and the small business size standard is 750 employees . This procurement is a Total Small Business Set-Aside. Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a non-Small Business Concern will not be considered for award. To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed below. The Government will not consider quotes or offers for partial items or quantities. Anticipated contract line items are as follows: Minimum Specifications: ANSI/TIA-568-C2 Balanced twisted-pair Telecommunications cable and components. This standard specifies the mechanical and transmission requirements of Category 3,5E, 6, 6A and 8 balanced twisted-pair copper cabling and components. Salient Characteristics a) CAT5E: Non-plenum, UTP, solid riser cable 24/4P CAT5E 1000ft network cable b) CAT6: Non-plenum, UTP, solid riser cable 23/4P CAT6 1000ft network cable Line item Description: 0001 C5E244-06 24-4/PR CAT5E BLUE CMR 350 (80 Box) Qty: 80,000 Foot 0002 C62304-09 23-4/PR CAT6 WHITE SOLID (80 Box) Qty: 80,000 Foot 0003 C5E2404-08 24-4/PR CAT5E GRAY CMR 350 (50 Box) Qty: 50,000 Foot 0004 PC-5E-03-BLU-B CAT5E 3 FT BLU W/BOOTS Qty: 600 Each 0005 PC-5E-05-BLU-B CAT5E 5 FT BLUE W/BOOTS Qty: 200 Each 0006 PC-5E-07-BLU-B CAT5E 7 FT BLUE W/BOOTS Qty: 100 Each 0007 PC-5E-10-BLU-B CAT5E 10 FT BLUE W/BOOTS Qty: 75 Each 0008 PC-5E-30-BLU-B CAT5E 30 FT BLUE W/BOOTS Qty: 15 Each 0009 PC-5E-35-BLU-B CAT5E 35FT BLUE W/BOOTS Qty: 15 Each Free on Board (FOB) Destination Shipping Address for Delivery and Acceptance: N66001 Ship to Address: Ship to Address: N66001 SPAWAR Systems Center Pacific Receiving Officer 4297 Pacific Highway, Bldg OT7 San Diego, CA 92110-5000 Offeror Instructions: Notice: The Government may consider quotes that fail to follow all instructions to be unacceptable and ineligible for contract award. Quotes shall: 1. Include a separate concise, clear, and descriptive narrative technical approach (not to exceed one page) on how they will provide all of the supplies to the site. Quoters are encouraged to submit pictures, brochures, or and other pertinent technical information of the quote to facilitate the evaluation; 2. Include pricing for each individual unit and a total price in US Dollars ($); 3. Be written in English and show the offeror name, address, DUNS and CAGE code, business size and type of small business, and telephone and e-mail address of an Offeror point of contact; 4. Stay within the page limitations indicated below; 5. Be submitted in electronic PDF or Excel format; and Certification: "To be considered for award, the offeror certifies that the product(s) being offered is an original, new and Trade Agreements Act (TAA) compliant product, and that the subject products are eligible for all manufacturer warranties and other ancillary services or options provided by the manufacturer. Offeror further certifies that it is authorized by the manufacturer to sell the products that are the subject of this action in the US (i.e., that the products are TAA compliant and that the offeror is authorized to sell them in the US)." Certification is not limited in pages. Offerors are required to submit documentation with the offer identifying its supply chain for the product, and certifying that all products are new, TAA compliant, and in their original packaging. By making an offer, offeror also consents to no cost cancellation of the non-compliant awarded items if, upon inspection after delivery, any products provided are not recognized or acknowledged by the manufacturer as new and original products that are eligible for warranties and all other ancillary services or options provided by the manufacturer or that offeror was not authorized by the manufacturer to sell the product in the US, or that the product is in some manner not TAA compliant. All text shall be formatted on an 8 by 11 inch page in 12 point Times New Roman font. All pages of the Technical File shall be numbered and shall not exceed ten pages. The technical acceptability shall include the following: Factor I Specifications: See technical acceptability specifications The price quote shall include the following: Factor II Price: The price quote shall include the following and is limited to one page: Offerors shall provide a unit price for each item and a total firm-fixed-price for all line items. The total firm-fixed-price shall include all applicable taxes, shipping, and handling costs to the shipping address listed above. Evaluation Factors for Award: Factor I Specifications: The Government will evaluate the quote to see if the following specification requirements are met: Basis of award: The government anticipates awarding a firm-fixed price purchase order and it will be based on the lowest priced technically acceptable. "QUOTE BRAND NAME or EQUAL SPECIFATIONS" (See attached minimum specifications) Factor II- Price: Lowest price Technically acceptable (LPTA) The Government will evaluate the total price to determine if it is fair and reasonable. Notice: Any offer rated "Unacceptable" under any one of the above factors may be determined to be ineligible for contract award. Basis For Award: This procurement will use the lowest price technically acceptable source selection methodology. The Government intends to award a contract to the lowest price technically acceptable quote received in response to this solicitation. Any quote evaluated as unacceptable will not receive an award. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-91 and Defense Federal Acquisition Regulation Supplement (DFARS) Publication Notice 20161222 . It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at www.farsite.hill.af.mil or https://acquistion.gov/far/. The following provisions apply to this acquisition : FAR 52.204-7, System for Award Management (Oct 2016); FAR 52.212-1, Instructions to Offerors Commercial Items (Jan 2017); FAR 52.212-3 and Alt I, Offeror Representations and CertificationsCommercial Items (Jan 2017); FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to IranRepresentation and Certifications (Oct 2015); 252.203-7005, Representation Relating to Compensation of Former DoD Officials (Nov 2011); and 252.247-7022, Representation of Extent of Transportation by Sea (Aug 1992). The following clauses, incorporated by reference, apply to this acquisition: 52.204-16, Commercial and Government Entity Code Reporting (Jul 2016); 52.204-18, Commercial and Government Entity Code Maintenance (Jul 2016); 52.212-4, Contract Terms and Conditions -- Commercial Items (Jan 2017). FAR Clause 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items applies to acquisition and includes: 52.XXX-X , The following additional FAR and DFARS clauses, incorporated by reference, apply to this solicitation: 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013); 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013); 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004); 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (Sep 2011); 252.203-7002, Requirement to Inform Employees of Whistleblower Rights (Sep 2013); 252.204-7003, Control of Government Personnel Work Product (Apr 1992); 252.204-7006, Billing Instructions (Oct 2005); 252.204-7011, Alternative Line Item Structure (Sep 2011); 252.204-7012, Safeguarding of Unclassified Controlled Technical Information (Oct 2016); 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Jun 2012); 252.232-7006, Wide Area Work Flow Payment Instructions (May 2013); 252.232-7010, Levies on Contract Payments (Dec 2006); 252.244-7000, Subcontracts for Commercial Items (Jun 2013); and, 252.247-7023, Transportation of Supplies by Sea (Apr 2014). This RFQ closes on 25 Jul 2017 at 10:00 AM, Pacific Time. Questions and quotes must be uploaded on the SPAWAR e-Commerce website at https://e- commerce.sscno.nmci.navy.mil, under SSC Pacific/Simplified Acquisitions/N66001-17-Q- 6766. E-mail quotes or offers will not be accepted. Late quotes will not be accepted. For e-Commerce technical issues, contact the SPAWAR Paperless Initiatives Help Desk at 858- 537-0644 or contact@example.gov. The point of contact for this solicitation is Frederick Espiritu at contact@example.gov. Please include RFQ# N66001-17-Q-6766 on all inquiries. The due date for questions is 20 Jul 2017. Questions may be addressed afterward at the discretion of the Government. All responding vendors must have a completed registration in the System for Award Management (SAM) website prior to award of contract. Information can be found at https://www.sam.gov/. Complete SAM registration means offerors shall have a registered DUNS and active CAGE Code.