Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FILTER, RADIO FREQUE

Active
SPE7M5-26-Q-0828Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 262 units of a radio frequency interference filter with NSN 5915-00-865-7973 under solicitation SPE7M5-26-Q-0828, issued by the Department of Defense’s Active Devices Division. Delivery is required within 167 days of award, and all supplies must comply with DLA packaging standards and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and attributes must be verified at designated levels VII, IV, and II for critical, major, and minor characteristics respectively. Unspecified attributes default to major classification. The contractor must adhere to CMMC Level 2 self-assessment requirements and remove all government identification from non-accepted supplies. The place of performance is New Cumberland, PA, with Rosella Lynn as the primary point of contact for inquiries.

General Info

Procure 262 radio frequency filters NSN 5915008657973 from approved supplier by August 14, 2026, via SAM.gov.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-Q-0828.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Rosella Lynn
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FILTER,RADIO FREQUENCY INTERFERENCE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR NSN/Part Number: 5915-00-865-7973 Quantity: 262 EA Purchase Request: 7017048326QTY: 262 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
CONTROL, COMPUTER TERMI
Solicitation # SPE4A7-26-T-613A
This contract pertains to the procurement of two units of a computer terminal controlled under the part number EP-0031379 and NSN 5895017136646, with a total contract value of $4.00 at $2.00 per unit. The delivery is required within 171 days from the contract date, with a firm delivery deadline of May 21, 2027, and an intended ship date of January 31, 2027. Goods must be delivered FOB origin, inspected and accepted at destination, with zero tolerance for quantity variance. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containment as defined by QUP 001, preservative method 10, and packing code U. Marking must comply with MIL-STD-129, with no special marking required. The item is subject to technical and quality requirements referenced in the DLA Master List, and sampling for acceptance follows MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs as specified. All shipments must be palletized per DLA guidelines and addressed to the designated receiving warehouse in Tracy, California. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the unit of issue conforms to DoD standards with a corresponding ANSI X12 equivalence. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613A, managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
DIVIDER, POWER, RADIO FR
Solicitation # SPE7M5-26-Q-0823
The contract pertains to the procurement of a DIVIDER, POWER, RADIO FR with the NSN/Part Number 5985-01-447-7780, requested in a single unit under Purchase Request 7017353472. The solicitation, identified by number SPE7M5-26-Q-0823, was posted on August 4, 2026, with a response deadline of August 10, 2026. It is issued by the Defense Logistics Agency under the Department of Defense as a federal procurement action with no specific set-aside designation. The item is for use in military radio systems, and the place of performance and delivery location are not specified beyond the United States. Interested parties must submit responses through the official DIBBS platform prior to the deadline to be considered for award.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334290
New
DIBBS
DETECTOR, RADIO FREQUEN
Solicitation # SPE7M1-26-Q-1319
The contract solicits 43 units of a radio frequency detector under NSN 1285-01-247-5149, with a delivery deadline 197 days after award, and is issued under solicitation number SPE7M1-26-Q-1319 with a response deadline of August 19, 2026. The procurement falls under NAICS code 334290 and is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item involves covered defense information and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring third-party assessment by a certified C3PAO. Technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce; access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA approval. Delivery is to New Cumberland, Pennsylvania, with primary point of contact Bernadine Davis-Sheets, and the solicitation is publicly accessible via the DIBBS platform.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
DIBBS
CONTROL-MONITOR
Solicitation # SPE4A6-26-T-12GJ
The contract pertains to the procurement of four units of a Critical Application Item, CONTROL-MONITOR, manufactured by THERMO EBERLINE LLC with part number 436001000 and NSN 5895017194735, under solicitation SPE4A6-26-T-12GJ. Delivery is required FOB origin within 171 days, with zero variance allowed in quantity and inspection and acceptance occurring at the manufacturer’s location. All packaging must comply with MIL-STD-2073-1E and palletization must adhere to DLA Packaging Requirements, with marking following MIL-STD-129 and no special marking codes applied. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. The contractor is responsible for meeting CMMC Level 2 Self-Assessment requirements and ensuring compliance with all referenced technical and quality provisions under the DLA Master List, including documentation for source approval, removal of government identification from non-accepted supplies, bare item marking, and inspection at origin. The item is subject to DoD unit of issue standards and must be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma, with the required ship date set for January 31, 2027, and the original delivery deadline at June 10, 2027. All transportation and shipping instructions must follow DLAD Procurement Notes C19 and C20, and the solicitation was issued by the ASC Commodities Division of the Department of Defense, with Emma Garrett as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
Federal
WIND SENSING UNIT
Solicitation # N0010426QX114
The solicitation N0010426QX114 seeks the repair of five Wind Sensing Units (NIIN 015325726, NSN 5895-01-532-5726, Part No. 81164/0200.00) under a firm-fixed-price, not-to-exceed, or estimated price structure, with all repairs to be performed in accordance with the original manufacturer’s specifications, drawings, and the contractor’s established overhaul standards. Each repaired unit must meet operational and functional requirements and undergo Higher Inspection per MIL-I-45208, with all inspection and testing integrated into the contractor’s quality program. The contractor is responsible for conducting inspections at their facility, and final acceptance is also to occur at their location. The delivery term is FOB Destination, and all items must be uniquely identified with a UII compliant with MIL-STD-130 and labeled using machine-readable codes under MIL-STD-129. Packaging must adhere to best commercial practices for overseas shipment, and hazardous materials require labeling consistent with 29 CFR 1910.1200. The repair turnaround time is to be established by the offeror, and all units must be received by the contractor within 365 days of contract award, with late inductions requiring bilateral agreement. The contract incorporates a comprehensive suite of FAR and DFARS clauses addressing ethical, safety, cybersecurity, and compliance requirements, including prohibitions on kickbacks, external influence, and contracting with inverted domestic corporations or state sponsors of terrorism. Cybersecurity obligations are enforced through DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.204-7018 banning covered telecommunications equipment. Contractors must implement counterfeit electronic part detection systems under DFARS 252.246-7007 and comply with NIST SP 800-171 requirements. Reporting obligations extend to executive compensation, subcontract awards, employment data, and anti-trafficking measures. All payments are to be processed electronically via WAWF, with cost vouchers for labor-hour items and invoices with receiving reports for fixed-price line items. The solicitation is not a small business set-aside, and responses must be submitted electronically by 21 August 2026 to Sherry Kaylor at the designated
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in 17 days
View Details
NAICS: 334290
New
DIBBS
Commercial Off-the-Shelf (COTS) Display Unit SupplyThe contract calls for the procurement and delivery of four Commercial Off-the-Shelf display units with part number 998-4230-00 and NSN 5895-01-733-3331, manufactured by Planar Systems, Inc., to be provided as a complete, ready-to-deploy solution. These units are intended for immediate operational use without requiring additional customization or integration beyond standard deployment procedures. The requirement falls under NAICS code 334290, indicating a focus on other electronic component manufacturing, and is classified as a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Deliveries must be fulfilled to the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 3, 2026, with a response deadline set for August 11, 2026, allowing potential vendors a limited window to submit proposals. The contract is not subject to any specific set-aside classification, meaning all eligible contractors may respond regardless of business size or designation. The procurement is managed through the DIBBS platform, and all communications and submissions must be conducted through the official online portal linked in the solicitation. The units must meet all technical and logistical requirements for military deployment, including compatibility, durability, and supply chain traceability, as dictated by DoD standards for COTS equipment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
ALARM-MONITOR
Solicitation # SPE4A6-26-T-11NE
The contract pertains to the procurement of two ALARM-MONITOR units under solicitation SPE4A6-26-T-11NE, with a total quantity of 2 units at a unit of issue of EA. Delivery is required within 25 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item, identified by NSN 6340014840342 and part number 9D-80310-29 from INNOVATIVE SOLUTIONS & SUPPORT INC, is classified as a critical application item with no shelf life requirement, and item unique identification is not mandated per the service customer’s request. All technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards. Packaging must comply with ASTM D3951 as supplemented by MIL-STD-129 marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. The delivery destination is Tinker AFB, Oklahoma, with no quantity variance permitted. The solicitation is a total small business set-aside under NAICS code 334290, with a response deadline of August 11, 2026, and primary point of contact is Bernice Adams at DLA.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
CASE, ELECTRONIC COM
Solicitation # SPE4A7-26-T-607M
The contract solicitation SPE4A7-26-T-607M is for the procurement of one unit of a CASE, ELECTRONIC COM, identified by NSN 5895-01-701-4810 and part number BSMU-B-CASE-TAN-018, with a total contract value of $1.00. Delivery is required within 294 days of award, with a specified delivery date of June 2, 2027, and shipment must be made FOB origin. The item is to be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and both inspection and acceptance are to occur at the destination. The contractor must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 and all markings and labeling conforming to MIL-STD-129, including compliance with RQ017 for physical identification of bare items. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0, respectively. Unspecified attributes are treated as major. The contract includes mandatory FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, cybersecurity safeguards, contracting changes, subcontracting, inspection, default, employment verification, export controls, electronic invoicing via WAWF, NIST SP 800-171 compliance, and prohibition of hexavalent chromium. The offeror must provide a Unique Entity Identifier and CAGE code, declare small business or socioeconomic status if applicable, and comply with all affirmative disclosure requirements for defense telecommunications equipment and joint venture participation. Invoicing must be submitted electronically through WAWF, and the contract contains no options or additional CLINs. All proposals must be submitted via the DLA Internet Bid Board System by August 11, 2026, with no physical submissions accepted.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
TRANSMITTER, TEMPERA
Solicitation # SPE4A6-26-Q-1252
This contract pertains to the procurement of two transmitter units, part number 6685-01-732-6391, designated as a critical application item from PYROMATION LLC, with a firm fixed price and no tolerance for quantity variance. Delivery is required within 115 days after award, with both inspection and acceptance occurring at the supplier’s origin. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special markings applied. The item must be palletized per DLA guidelines and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise specified. Documentation for source approval is governed by RC001, and government identification must be removed from non-accepted supplies per RQ011. The unit of issue complies with DoD standards, and transportation procedures follow DLAD procedural notes. The contract is linked to Purchase Request 7014171388 with a required ship date of October 15, 2025.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
HEAD, FLUID FILTER
Solicitation # SPE7LX-26-U-9210
The contract pertains to the procurement of one unit of a HEAD, FLUID FILTER, RECEIVER SUBASSEMBLY, RADAR with NSN 2940017027398 and part number 516-5903 REV 00 from CATERPILLAR INC 11083, issued under solicitation SPE7LX-26-U-9210 by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. This is a sole-source, simplified acquisition structured as a unilateral indefinite-delivery contract with a total estimated value not exceeding $350,000 per order, though the actual order quantity is one estimated unit and may not be purchased by the IDC. Delivery is required within 130 days FOB Origin, with inspection and acceptance occurring at the destination point, and no variance is permitted in quantity. The item is designated as a critical application item, and applicable technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced under RA001. Packaging, preservation, and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, with a packaging code of U, preservation method 41 (cooling/drying), and no special marking or hazardous material handling beyond standard compliance. The contract mandates use of the Wide Area WorkFlow system for all invoicing and documentation, and requires compliance with DLA’s packaging requirements RP001 and palletization standards. The solicitation is a total small business set-aside under NAICS code 334290 and incorporates numerous FAR and DFARS clauses including those on employment equity, combating human trafficking, eligibility verification, sustainable products, hazardous material identification, authorization and consent for data rights, and safeguarding covered contractor information systems. Clause 52.227-1 Alternate I and Alternate II are both applied for intellectual property rights. Contractors must affirm their small business status and, if claimed, any socioeconomic designation including WOSB, SDVOSB, HUBZone, or 8(a) participation, and must provide UEI and CAGE codes for all entities involved. Hazardous materials, if any, require full compliance with OSHA’s Hazard Communication Standard, including submission of Safety Data Sheets prior to award and ongoing updates during performance. All submissions must be electronically delivered via DIBBS by August 18, 2026, and no paper or
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
DIBBS
DISPLAY UNIT
Solicitation # SPE4A7-26-T-607G
This contract outlines the procurement of a commercial off the shelf display unit identified by part number 998-4230-00 and NSN 5895-01-733-3331, with a total quantity of four units required. The item must be delivered FOB origin within 300 days of contract award, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and unit containerization, and all marking must follow MIL-STD-129 with no special markings required. Palletization is governed by DLA packaging requirements, and the delivery address is specified as the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a unit price of $4.00 and a total contract value of $16.00. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract requires adherence to DLA procurement procedures for transportation and freight, and the solicitation was issued under contract number SPE4A7-26-T-607G with a response deadline of August 11, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
PANEL, PATCHING, COMM
Solicitation # SPE4A7-26-T-607V
The contract pertains to the procurement of a single unit of a PANEL, PATCHING, COMM with NSN 5895-01-687-9082, issued under solicitation SPE4A7-26-T-607V by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination, the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607. The item must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in packaging or preservation. The unit of issue is each, with zero variance allowed in quantity, and the contractor must use the approved DLA preservation methods including dry preservation, FAA wrap material, and box shipping containers. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The delivery deadline is February 2, 2026, and the contract includes specific transportation instructions tied to DLAD PROC NOTES C19 and C20. The point of contact for inquiries is James Sinks at james.sinks@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE
Solicitation # SPE7M5-26-T-367E
This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECE
Solicitation # SPE7M5-26-T-367P
This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367F
The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
RADOME, POLARIZER
Solicitation # SPE7M5-26-Q-0829
The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-367K
The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-367D
This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVICE, T
Solicitation # SPE7M5-26-T-366Y
The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.
Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-367G
This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.
Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-Q-0830
The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 444180
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-366W
The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.
Other Building Material Dealers

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SEQUENCING
Solicitation # SPE7M5-26-T-367L
This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-26-T-366U
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details