Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

59--LOW BAND ARRAY, ESM, IN REPAIR/MODIFICATION OF

Active
N0038326QPC52Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the repair or modification of a Low Band Array for Electronic Support Measures, identified by NSN 7R-5985-016098976-P8, with a quantity of three units to be delivered FOB origin. All proposals must ensure that the offeror, product, or manufacturer meets qualification requirements at the time of award, as mandated by FAR clause 52.209-1, and the Government is not applying commercial item acquisition policies under FAR Part 12, though interested parties may propose commercial alternatives within fifteen days of the notice. Technical data, including specifications, standards, and qualification lists, are accessible via ASSIST-Online or the DoD Single Stock Point, with downloadable PDFs available through the Quicksearch portal and physical requests handled by the DODSSP in Philadelphia. Patterns, drawings, deviation lists, and purchase descriptions are not available through DODSSP and must be obtained elsewhere. The solicitation number is N0038326QPC52, posted on August 7, 2026, with a response deadline of September 22, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense. The office is located in Philadelphia, Pennsylvania, and the primary point of contact for inquiries is Shamus F. Roache, reachable via email or phone at the provided contact details. The place of performance is unspecified, and no set-aside designation is indicated. Interested contractors must review all referenced documentation thoroughly and ensure compliance with the qualification criteria outlined in the solicitation, as failure to meet these at award will result in disqualification. Information regarding qualification requirements and additional details is available through the contracted office, and all submissions must be submitted prior to the deadline.

General Info

Three Low Band Array units for Electronic Support Measures to be repaired, FOB origin, qualified offerors only, bid due September 22, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NSN 7R-5985-016098976-P8, TDP VER 001, QTY 3 EA, DELIVERY FOB ORIGIN. Interested parties may obtain copies of Military and Federal Specificationsand Standards, Qualified Products Lists (QPLs), Qualified Product Databases(QPDs), Military Handbooks, and other standardized documents from the DoDSingle Stock Point (DODSSP) at Document Automation and Production Service(DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSISTHelp Desk at 215-697-2667 or 215-697-2179 (DSN: 442-2667), or mail their request to DLADocument Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. Award will be made only if the offeror, the product/service, or the manufacturer meets the qualification requirement(s) at time of award, in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify tothe contracting officer their interest and capability to satisfy theGovernment's requirement with a commercial item within 15 days of this notice.

Similar Contracts

Same NAICS industry code

NAICS: 811210
New
SLED
Annual Purchase for Maintenance of Forward Looking Infrared Video Management System
Solicitation # F2027003 Addendum 1
Tarrant County is seeking bids for an annual contract to maintain the Forward Looking Infrared Video Management System, with the award going to the lowest responsive bidder meeting all technical specifications. The initial contract term is twelve months, commencing on the date of award or upon notice to proceed as determined by the Purchasing Department. Prices submitted must remain fixed for the entire duration of the contract, and the county retains the option to extend the contract for two additional twelve-month periods provided the vendor agrees and all required documentation is submitted and remains valid. Should Tarrant County elect to exercise a renewal option, the vendor must submit updated documentation no later than thirty days before the start of the renewal period; failure to do so in a complete and timely manner may result in the rescission of the renewal or a new solicitation. The solicitation, identified as F2027003 Addendum 1, was posted on August 7, 2026, with a response deadline of August 27, 2026, and all inquiries should be directed to Allan Tucker, Senior Buyer, at the provided contact information.
Tarrant County

POSTED

about 7 hours ago

DEADLINE

in 20 days
View Details
NAICS: 811210
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEB
The contract pertains to the sole-source repair of a circuit card assembly identified by NSN 7H-5998-015421688-VN and part number S9515-AL-MMA-010, used in the Sub Atmosphere Control system under weapon system NV823323-1. This repair work is authorized solely for Hamilton Sunstrand Corp. (CAGE 73030), the original equipment manufacturer and the only source capable of providing the repair due to proprietary data and design rights held exclusively by the manufacturer, with no government ownership of the associated technical data. The procurement is conducted under FAR 6.302 and 10 U.S.C. 2304(c)(1), allowing noncompetitive negotiation based on the absence of alternative sources, and requires all non-approved vendors to submit a Source Approval Request prior to consideration, though the timeline will not be extended for such requests. The National Industrial Security Program and Buy American provisions apply, and UID marking is mandatory for delivered items. The contract is set for a one-year duration with an anticipated award date of 8 October 2026 following a solicitation posting on NECO on 21 August 2026, with responses due by 22 September 2026. Electronic submission is required, with no hard copy or telephone inquiries accepted. Despite appearing as a Small Business Set-Aside in metadata, the procurement is explicitly non-competitive and not designated for total small business set-aside in actual execution. Interested parties may submit capability statements by email to the point of contact, Taylor Weidman, within 45 days of the notice publication for consideration, though no competitive selection is anticipated.
Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
49--TEST PROGRAM SET, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB16
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole source repair contract for two Test Program Sets with part number H641 and NSN 7R-4920-016667514-SX to Howell Instruments INC under authority of 10 U.S.C. 3204(a)(1) and FAR 6.302. The Government does not own the technical data or design rights for this item and has determined that no other supplier can satisfy the requirement due to the proprietary nature of the component. Delivery will be FOB origin and the acquisition will follow FAR Part 15 procedures, excluding the commercial items framework of FAR Part 12. All responsible sources are invited to submit capability statements or proposals within 45 days of the synopsis, but the Government anticipates only one acceptable offer and will not delay the repair to await a Source Approval Request from other firms. The solicitation will be conducted electronically through NECO with no hard copies mailed or telephone inquiries accepted. The point of contact for submissions and inquiries is Kate N. Schalck, whose email is provided for capability and qualification submissions. This effort is not set aside for small businesses and no competitive bidding is currently planned, though any received proposals will be evaluated solely to determine if competition is feasible. The repair must proceed without interruption, and firms not previously approved to perform such work must still submit a Source Approval Request, though this will not affect the timeline. The solicitation posting date is August 7, 2026, with responses due by September 21, 2026, and the contract will be managed under the assigned solicitation number N0038326QFB16.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
Service and Maintenance Agreement for Bioraptr hig
Solicitation # 75N98026Q00974
The National Institutes of Health, Office of the Director, Office of Acquisitions, is seeking proposals under solicitation number 75N98026Q00974 for a firm-fixed-price contract to provide service and maintenance for the Bioraptr hig system. This acquisition is conducted under streamlined procedures for commercial items as outlined in FAR Subpart 12.6, with no separate written solicitation issued. The requirement is unrestricted, open to full and open competition, and is not expected to exceed the simplified acquisition threshold. The assigned NAICS code is 811210 for Electronic and Precision Equipment Repair and Maintenance, with a small business size standard of $34.0 million in annual receipts. Proposals must be submitted by August 24, 2026, and all provisions and clauses in effect as of the Federal Acquisition Circular dated August 7, 2026, apply. The contract will be awarded based on best value to the government, and the point of contact for inquiries is Johnsson, Jaddua C, reachable via email at jaddua.johnston@nih.gov. Performance is expected to occur in Bethesda, Maryland, with the agency office located at 20892, USA.
National Institutes Of Health Olao

POSTED

about 9 hours ago

DEADLINE

in 17 days
View Details
NAICS: 811210
New
Federal
Notice of Intent to Single Source to AB SCIEX LLC
Solicitation # FD-2026-467-RBC
The U.S. Department of Commerce, through NOAA’s National Marine Fisheries Service, intends to enter into a sole-source contract with AB SCIEX LLC for comprehensive multi-year service and support of its AB SCIEX ExionLC AE liquid chromatographer coupled with QTRAP 5500 tandem mass spectrometer systems. This requirement includes one base year and three option years to ensure continuous, uninterrupted operation of the high-precision instrument used by the Northwest Fisheries Science Center’s Environmental Chemistry Program. The decision to pursue a sole-source procurement is grounded in the exclusive nature of the proprietary technology and servicing protocols, as only AB SCIEX LLC possesses the authorized certifications, internal schematics, diagnostic software, and factory-trained personnel required to maintain the system’s ultra-sensitive performance under demanding physical conditions. No other vendor can provide services that meet the technical standards necessary for the research environment, and alternative service providers risk causing irreversible damage to the high-value equipment through improper repairs. The contract falls under NAICS Code 811210 with a $34 million small business size standard, and no set-aside is planned. The government has determined that AB SCIEX LLC is the only viable source capable of delivering the required service quality, citing exclusive licensing rights, proprietary data, OEM-specific training, and unauthorized access restrictions as barriers to competition. This notice is not a solicitation and does not invite competitive bids, but firms may submit written documentation within 15 days of publication to challenge the sole-source determination. Responses must be in writing and submitted to Raynier Camerino at raynier.camerino@noaa.gov by August 22, 2026. The government retains full discretion over whether to proceed with a competitive acquisition based on any submissions received. The contract will be performed in Seattle, Washington, with the office of primary contact located in Kansas City, Missouri.
Department Of Commerce Noaa

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 811210
New
Federal
Evaluation and Calibration of the Air Data Test Set (ADTS) Calibrator (ADC-2500V3)
Solicitation # 70Z03826QE0000051
The United States Coast Guard Aviation Logistics Center is soliciting quotations for the evaluation and calibration of two Air Data Test Set Calibrators, model ADC-2500V3, with serial numbers 488 and 408, under solicitation number 70Z03826QE0000051. This Request for Quotation is issued as a sole source procurement under FAR 6.302-1(b)(2), authorizing award exclusively to TESTVONICS INC, the Original Equipment Manufacturer with CAGE Code 1A9E1, as the only known source capable of providing the required services. The acquisition is classified under NAICS code 811210 with a small business size standard of $34.0 million in average annual receipts, though no set-aside is being used. The task order will be awarded on a firm-fixed-price basis, with delivery required by September 15, 2026, for the first unit and November 30, 2026, for the second. All work must be traceable directly to the OEM, and contractors must submit a Certificate of Conformance compliant with FAR 52.246-15; non-OEM offerors must provide additional manufacturer certification and full traceability documentation. A redacted Justification and Approval for other than full and open competition is included with the solicitation. No drawings, specifications, or schematics are available from the agency. Offers must be submitted via email to Denise.J.Bulone@uscg.mil by 11:59 p.m. Eastern Time on August 14, 2026, with the solicitation number clearly noted in the subject line, and an award is anticipated by August 17, 2026.
Aviation Logistics Center (ALC)(00038)

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 811210
New
Federal
INTENT TO SOLICIT ONLY ONE SOURCE: The Government requires a service and maintenance agreement with Renishaw, Inc. to maintain the Renishaw machine
Solicitation # W911QX26QA195
The U.S. Government is seeking to establish a sole-source service and maintenance agreement with Renishaw, Inc. to ensure ongoing operational support for Renishaw machines located at Aberdeen Proving Ground in Maryland. This requirement is exclusively targeted to Renishaw due to the specialized nature of the equipment and the need for manufacturer-specific expertise in servicing and maintaining its functionality. The solicitation, identified as W911QX26QA195, was posted on August 7, 2026, with a response deadline of August 13, 2026, at 3:59 PM Eastern Time. No set-aside provisions are applied, and the procurement falls under NAICS code 811210, which covers machinery and equipment repair and maintenance services. The contracting activity is managed by the Department of Defense through the W6QK Acc-Apg Adelphi office, located in Adelphi, Maryland. All inquiries and communications must be directed to Laurice Bocao, the primary point of contact, via email at laurice.l.bocao.civ@army.mil. The contract performance site is confirmed to be at Aberdeen Proving Ground, Maryland, with a ZIP code of 21005.
W6QK Acc-Apg Adelphi

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811210
New
Federal
16--RANPAC/DELAY LINES,, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RMA93
The contract pertains to the repair or modification of 16 RANPAC delay lines under NSN 7R-1680-015827562-E7, with a quantity of six units required, delivered FOB origin. The solicitation, identified as N0038326RMA93, was posted on August 7, 2026, with a response deadline of September 22, 2026, at 4:00 AM, and is currently classified as a presolicitation, indicating it is in the pre-award phase to gather industry input before formal bidding. The work is managed by the Navsup Weapon Systems Support office under the Department of Defense, located in Philadelphia, Pennsylvania, with no specific set-aside or NAICS code designated. The point of contact for inquiries is Ethan T. Stein, reachable via email at ETHAN.T.STEIN.CIV@US.NAVY.MIL or by phone at (215) 697-2983, and the contract is accessible through the SAM.gov platform. Delivery terms place responsibility on the contractor to ship from their origin location, and no performance location beyond delivery point is specified.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
16--PANEL,FAULT-FUNCTIO, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB23
The contract pertains to the repair or modification of a 16-panel fault-function unit identified by NSN 7R-1680-016946940-LU, with a quantity of 15 units required under Technical Data Package Version 001. Delivery is specified as FOB origin, meaning responsibility and risk transfer to the buyer once the items leave the supplier’s facility. The solicitation, numbered N0038326QFB23, was posted on August 7, 2026, with responses due by September 21, 2026, at 4:00 AM. It is classified as a presolicitation, indicating the government is seeking industry input prior to issuing a formal request for proposal. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. All contract-related correspondence should be directed to Kate N. Schalck, the primary point of contact, via email at KATE.N.SCHALCK.CIV@US.NAVY.MIL or by phone at (215) 697-1020. The place of performance details are unspecified, and no set-aside classification or NAICS code has been designated for this opportunity.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
16--INPUT DEVICE ASSY (, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RMB18
The U.S. Navy, through the Naval Supply Systems Command Weapon Systems Support, intends to sole-source the procurement of 11 units of an input device assembly with part number 123SCAV9452-3 and NIIN 015817928 under the authority of FAR 6.302-1, citing unique circumstances that justify non-competitive acquisition. The item is designated for repair or modification purposes and will be delivered FOB origin. This presolicitation notice, issued under solicitation number N0038326RMB18 and published on August 7, 2026, seeks potential suppliers to confirm their capability to fulfill the requirement, though responses are not guaranteed to trigger competition. Interested parties have 45 days from the publication date, until September 22, 2026, to submit proposals, quotations, or capability statements; this window is reduced to 30 days if an existing Basic Ordering Agreement applies. The government retains full discretion to decide whether to proceed with a competitive or non-competitive award based on the responses received. The contracting office is located in Philadelphia, Pennsylvania, with Tara B. Kupperstein serving as the primary point of contact for all inquiries.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811210
New
Federal
59--ELECTRONIC MODULE,S - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC56
This contract solicitation is for the procurement of 11 units of a flight-critical electronic module identified by NSN 7R-5963-015453394-EQ, with delivery terms FOB origin. Due to the technical complexity and safety-critical nature of the item, acquisition is restricted to previously approved sources only, as the Government has determined that adequate technical data and manufacturing knowledge are not publicly available and remain proprietary to the qualified vendors. The design control activity mandates source approval prior to award, and only those sources already vetted and approved by the cognizant Government engineering activity may be considered. Any new proposed source must submit comprehensive documentation aligned with the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, depending on intent, and failure to provide complete and accurate data will result in disqualification. If a source approval request is pending review at the time of proposal submission, a copy of the cover letter affirming that submission must be included with the offer. The solicitation explicitly prohibits the use of FAR Part 12 commercial item acquisition policies, meaning the Government is not seeking commercially available off-the-shelf solutions and requires specialized, controlled-source components. The item’s technical data, design capability, and repair expertise are not economically accessible to the Government, making reliance on approved sources essential to ensure operational readiness and quality assurance. Offers must be submitted by the deadline of September 21, 2026, and awards will only be made if the offeror, product, or manufacturer meets all qualification criteria at the time of award in accordance with FAR clause 52.209-1. Additional technical specifications and standards may be accessed via ASSIST-Online or the DODSSP system, though patterns, drawings, and deviation lists are not available through these channels. The primary point of contact for qualification inquiries is Dana N. Knittel at NAVSUP Weapon Systems Support in Philadelphia, and the Government retains the right to proceed with award based on Fleet support needs even if new source approvals are delayed.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
J065--NEW SPS Equipment Maintenance at Green Bay CBOC.- 695
Solicitation # 36C25226Q0283
The contract is for preventative maintenance and corrective/emergency repair services for Steris SPS equipment at the Milo C. Huempfner Health Care Center in Green Bay, Wisconsin, under a Firm Fixed Price arrangement with a base period running from September 1, 2026, to August 31, 2027, and an option to renew for up to three additional years. Only Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) are eligible to compete, as this is a mandatory set-aside, and all offerors must provide verifiable certification of SDVOSB status to be considered. Contractors must employ at least one fully qualified Field Service Engineer and one qualified backup, with proof of manufacturer authorization, formal training, and relevant experience required. All work must follow manufacturer specifications, using only OEM or OEM-certified parts, and must include calibration of test equipment to NIST-traceable standards. Emergency response timelines require a four-hour phone response, 48-hour on-site arrival, and 72-hour repair completion. Performance includes four to two preventative maintenance visits per year per unit, firmware updates, and submission of detailed Equipment Service Reports signed by both the contractor’s technician and the Government’s Contracting Officer’s Representative. Contractors must supply all tools, diagnostic software, service manuals, and test equipment, as the government will not provide any of these resources. All contractor personnel requiring facility access must undergo Special Agreement Check and National Agency Check with Inquiries, comply with HSPD-12, OMB M-05-24, and FIPS PUB 201 for Personal Identity Verification, and must return any government-issued identification upon contract completion or termination. Invoices must be submitted electronically to the Veterans Affairs Financial Services Center using approved methods, with payment terms governed by the Prompt Payment Act. Proposals must be submitted via SAM.gov by the deadline of May 20, 2026, and must include the SF-1449 form, UEI, manufacturer certifications, calibration records, training credentials, and full compliance with FAR clauses covering ethics, whistleblower protections, government property, socioeconomic compliance, and contractor conduct. Evaluation will be based on a trade-off process weighing technical quality and price, allowing award to the most advantageous offer, not necessarily the lowest priced. The contract strictly prohibits unauthorized scope changes and requires immediate notification to the COR if work deviates from the Statement of Work, along with a formal cost estimate for any additional effort. Final acceptance rests with
252-NETWORK Contract Office 12 (36C252)

POSTED

about 9 hours ago

DEADLINE

in 13 minutes
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 334511
New
Federal
59--ANTENNA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RPC65
The contract pertains to the acquisition of a flight-critical antenna component under NSN 7R-5985-015686919-E8, with a quantity of four units to be delivered FOB origin. Due to the unique design capability, proprietary manufacturing knowledge, and specialized technical data held exclusively by previously approved sources, procurement is restricted to those entities previously vetted and authorized by the Government. The item requires formal engineering source approval prior to contract award, as the available technical data is insufficient to support full and open competition, and the qualification of any new supplier would take longer than the timeline allows. Only preapproved sources have been solicited, and any entity not currently approved must submit comprehensive documentation aligned with the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, depending on the nature of their proposed involvement. Failure to provide complete and accurate information as specified will result in disqualification from consideration. Requests for source approval already under evaluation at NAVSUP WSS must include a copy of the original submission cover letter. The Government is pursuing this acquisition under FAR 6.302-1, allowing sole-source negotiation due to the absence of qualified alternate suppliers and the critical nature of the component. While the notice is not a request for competitive proposals, all responsible parties may submit capability statements within 45 days of the publication date, or 30 days if under an existing Basic Ordering Agreement. Offers must conform strictly to the source approval requirements, and the Government retains full discretion to proceed without competition based on operational needs and market assessments. Commercial item acquisition policies under FAR Part 12 are not being applied, but interested vendors may still declare if they can meet the requirement with a commercial item within 15 days. Technical specifications and associated documents may be accessed via ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not stocked there. Proposals must be directed to the designated point of contact, Chris Campellone, and submitted prior to the September 21, 2026 deadline.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334416
New
Federal
59--RESISTOR FEEDBACK A
Solicitation # N0038326QPC53
The contract solicitation involves the procurement of six units of a resistor feedback component identified by NSN 1R-5905-011820286-EY, TDP VER 006, with delivery terms specified as FOB origin. All offers must comply with qualification requirements in place at the time of award, as governed by FAR clause 52.209-1, and the government has determined that commercial item acquisition policies under FAR Part 12 do not apply to this procurement. Interested parties are directed to obtain all applicable Military and Federal Specifications, Standards, QPLs, QPDs, and Military Handbooks through the DoD Single Stock Point via DAPS in Philadelphia, with most documents accessible online through ASSIST-Quick Search at quicksearch.dla.mil. Those unable to access internet resources may contact the DODSSP ASSIST Help Desk by phone or mail for document requests. The solicitation number is N0038326QPC53, posted on August 7, 2026, with a response deadline of September 22, 2026, and no set-aside designation has been assigned. The requesting organization is the Naval Supply Systems Command Weapon Systems Support, based in Philadelphia, Pennsylvania, and the primary point of contact for inquiries is Shamus F. Roache, reachable via email or phone. The component’s official title is 59--RESISTOR FEEDBACK A, and any offeror wishing to propose a commercial item alternatives must notify the contracting officer within fifteen days of the notice date.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333612
New
Federal
16--GEARBOX,INPUT MODUL, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RFB28
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support in Philadelphia is seeking to procure the repair of seven input gearboxes, part number X0606-01093-042 with NSN 7R-1615-017032801-H5, on a sole source basis from Sikorsky under the existing Basic Ordering Agreement N00383-26-G-P401. No technical drawings or data are available, and the government does not hold rights to any proprietary information required to source the part from alternate suppliers, making Sikorsky the only viable source under 10 U.S.C. 3204(a)(1) and FAR 6.302. The acquisition will follow FAR Part 15 procedures, excluding commercial item acquisition policies under FAR Part 12, and will not be set aside for small businesses. All responsible sources may submit capability statements or proposals within 45 days of the synopsis date, but the government intends to evaluate and award to Sikorsky exclusively. Any firm not already approved to manufacture this item must submit a Source Approval Request, though the procurement will proceed without waiting for such approvals. Electronic submissions via email to Kate N. Schalck are required; no hard copies or telephone inquiries will be accepted. The solicitation will be published through NECO, with a response deadline of September 21, 2026, and delivery will be FOB origin.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
49--FILTER SET
Solicitation # N0038326QPC57
The contract pertains to the procurement of 49 filter sets under NSN 1R-4920-998448673-SX, with delivery terms set at FOB origin. This item is classified as flight critical, necessitating prior Government source approval for any contractor to be eligible for award. Only pre-approved sources have been solicited due to incomplete or insufficient technical data that prevents open competition. Proposals from non-approved sources must include complete documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, specific to whether the offeror has prior experience producing the item or is submitting for the first time. Failure to submit all required documentation or proof of a previously submitted approval request will disqualify the offer. If source approval cannot be finalized in time to meet operational timelines, award may proceed based on Fleet support needs. The Government is not leveraging FAR Part 12 commercial item acquisition policies, though potential offerors may still propose commercial alternatives within 15 days of this notice. Technical specifications, military standards, and related documents can be obtained through ASSIST-Online or the DODSSP, with internet access recommended for retrieval. All awards are contingent on the offeror, product, and manufacturer meeting qualification criteria at the time of award, as mandated by FAR clause 52.209-1. Additional inquiries may be directed to the designated point of contact, Abbey R. Ettinger, at the specified email and phone number.

POSTED

about 9 hours ago

DEADLINE

in about 2 months
View Details
New
Federal
16--ACTUATOR,ELECTROMEC, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB12
The contract solicitation pertains to the repair or modification of an electromechanical actuator identified by NSN 7R-1680-016891302-H5, with a quantity of four units required. The technical documentation reference is TDP VER 001 and the reference number is 06391-05801-106, indicating specific engineering and procedural guidelines for the work. Delivery is mandated under FOB origin terms, meaning the responsibility for transportation and associated costs shifts to the buyer upon shipment from the seller’s location. The solicitation is issued under N0038326QFB12 by the Naval Supply Systems Command Weapon Systems Support, under the Department of Defense, and is posted as a presolicitation with a response deadline of September 21, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact is Taylor M. O’Connor, reachable via email or phone for official inquiries related to the requirement. No set aside type has been designated, and the NAICS code is not specified, suggesting the opportunity remains open to all eligible contractors without socioeconomic preferences.

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
25--ACTUATOR,HYDRAULIC-, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC54
The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia intends to procure the repair of eleven hydraulic actuators, NSN 7RH 2520 012826431 SX, part number 1366AS126-01, with delivery terms FOB origin. This part is exclusively supported by the original equipment manufacturer, and no technical data or drawings are available to the government, meaning no alternative suppliers can currently provide repair services without formal source approval. Only FORCE IN MOTION LLC and MOORE PUMPS INC are recognized as approved sources, and any other interested party must submit a Source Approval Request, though the procurement will not be delayed for such requests. The acquisition will follow FAR Part 15 procedures, excluding commercial item acquisition policies, with Buy American requirements and UID marking applicable. The solicitation will be issued electronically via NECO on or about August 24, 2026, with responses due by September 21, 2026, and an anticipated award date of October 30, 2026. The NAICS code is 336350, and while not a small business set-aside, offers from all responsible sources are welcome. Interested firms must submit capability statements via email to the designated point of contact, and no hard copies or telephone inquiries will be accepted.

POSTED

about 9 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--FAIRING ASSEMBLY
Solicitation # N0038326QFB20
NAVSUP Weapon Systems Support in Philadelphia is seeking to award a sole source contract to Sikorsky Aircraft Corp for two aircraft struts identified by NSN 1R-1650-016629529-H5 and part number 06205-03001-041, under an existing blanket purchase agreement N00383-26-G-P401. The requirement is being handled on a sole source basis because the Government lacks sufficient, accurate, or legible technical data to allow for competitive sourcing, and the time required to approve an alternative source would delay award. Delivery is FOB origin, and the items are subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, necessitating Government Source Approval prior to award. Any offeror not already an approved source must submit all required documentation as outlined in the NAVSUP WSS Source Approval Brochure; incomplete submissions will be disqualified. The solicitation, identified as N0038326QFB20, was posted on August 7, 2026, with responses due by September 21, 2026. All inquiries should be directed to Taylor O'Connor at taylor.m.oconnor.civ@us.navy.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332410
New
Federal
16--HEAT EXCHANGER,AIR, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QBA55
The contract pertains to the acquisition of one unit of a heat exchanger for air repair or modification, identified by NSN 7R-1660-011046489-H1, with delivery occurring FOB origin. This item is classified as flight critical, necessitating strict source approval by the Government due to the specialized engineering, manufacturing, and repair knowledge held exclusively by previously approved sources. Technical data and proprietary capabilities essential to maintaining the part’s quality are not economically available to the Government, and no alternate source may be considered without formal qualification through the design control activity’s procedures, approved by the cognizant Government engineering activity. Only sources previously vetted and approved by the Government have been solicited, as the time required to qualify a new source would delay delivery beyond operational needs. Prospective offerors who are not approved sources must submit comprehensive documentation from the NAVSUP Weapon Systems Support Source Approval Information Brochures, detailing their experience with the same or similar item. Failure to provide complete documentation or evidence of prior submission will disqualify the proposal. Approval requests under review must be accompanied by a copy of the cover letter submitted to NAVSUP WSS. The contracting activity will proceed with award based on Fleet support needs if source approval cannot be completed in time. The solicitation is issued under FAR 6.302-1 for other than full and open competition and is not a request for competitive proposals but allows responsible sources to express interest and submit proposals within 45 days of publication. Offers are evaluated solely on compliance with qualification criteria at the time of award, with FAR clause 52.209-1 governing eligibility. The Government has determined that commercial item acquisition policies under FAR Part 12 do not apply, though parties may still propose commercial alternatives within 15 days of the notice. All technical specifications and standards referenced are obtainable through ASSIST-Online or the DODSSP, while patterns, drawings, and deviation lists are not available through these channels. The primary point of contact for qualification inquiries is Amanda M. Sweeney of NAVSUP Weapon Systems Support in Philadelphia, PA. The award decision rests entirely within the Government’s discretion based on operational urgency, source qualification, and availability of critical technical data.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 423610
New
Federal
16--DISTRIBUTER,DC POWE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB24
The contract pertains to the distribution of a DC power unit for repair or modification under NSN 7R-1650-016647296-H5, with technical documentation version 001 and reference number 06550-00804-104, for a single unit to be delivered FOB origin. It is issued under solicitation number N0038326QFB24 by the Navsup Weapon Systems Support office under the Department of Defense, with the primary point of contact being Taylor M. O'Connor at the Philadelphia, Pennsylvania address, reachable via email or phone. The presolicitation was posted on August 7, 2026, and responses are due by September 21, 2026, at 4:00 AM UTC, with no set-aside type specified and no designated place of performance beyond the origin delivery terms.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details