Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

59--PRINTED CIRCUIT BOA

Awarded
SPE7M126U3281Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is an indefinite delivery vehicle for printed circuit boards, with an estimated quantity of 24,000 units and a ceiling value of $350,000.00, allowing for flexible ordering within those limits. It was awarded under solicitation number SPE7M126U3281, posted on July 20, 2026, and falls under NAICS code 334412, which classifies it within the printed circuit board manufacturing sector. The awarding agency is the Defense Logistics Agency Land and Maritime, a division of the Department of Defense, with the contracting office located in Columbus, Ohio. There is no set-aside designation specified, meaning the contract is open to all eligible performers. Primary point of contact for inquiries is Desmond Forshey, reachable via email at [email hidden] or by phone at [phone hidden]. The place of performance has not been designated, indicating delivery locations may vary based on operational needs. The contract can be accessed through the SAM.gov portal using the provided UI link.

General Info

Indefinite delivery contract for up to 24,000 printed circuit boards, $350,000 ceiling, DLA award, open competition.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$350,000

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

OH

Set-Aside

NONE

Awardee

HYDRAULICS INTERNATIONAL, INC.

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → DLA Land And Maritime
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Desmond Forshey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Proposed procurement for NSN 5998015686978 PRINTED CIRCUIT BOA: Line 0001 Qty 24 UI EA Deliver To: By: 0147 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 12. The Guaranteed Minimum quantity will be 3. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 56529 68000-100-5. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE7M5-27-T-1591
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M1-27-T-0840
Solicitation SPE7M1-27-T-0840 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of eight circuit card assemblies. The required hardware is identified by NSN 5998-01-628-2855 and corresponds to GE Fanuc Embedded Systems Inc. part number PMC942RC. The original required delivery date is June 26, 2027, with a need ship date of June 12, 2027. Delivery is established as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Compliance with CMMC Level 2 Self-Assessment and NAVSEA 5100-003D regarding mercury containment is required. Additionally, the solicitation prohibits the use of additive manufacturing for the produced items and incorporates the Buy American Act and various DFARS regulations regarding covered defense telecommunications and hazardous materials. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M5-27-T-1585
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M1-27-T-1665
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
Federal
Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies to support DLA supply contracts for the Department of Defense, specifically through the Pa DLA Aviation At Philadelphia. The scope of work includes fabricating printed circuit boards, sourcing and populating components using SMT or through-hole assembly, and performing functional verification with testing equipment. The primary deliverable consists of three units of NSN 5998-01-462-4333. The contractor must ensure strict compliance with the Buy American Act regarding domestic origin requirements. Additionally, the provider is responsible for reporting end items via IUID through the IUID Registry or WAWF. This opportunity falls under NAICS code 334412, with a response deadline set for November 6, 2026.
Pa DLA Aviation At Philadelphia

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAJB
Solicitation N0010426QYAJB is a fixed-price request for quotations issued by the Navsup Weapon Systems Support Mech for the teardown, evaluation, repair, and modification of a circuit card assembly, NSN 5998-01-577-3864. The contractor is required to perform all work in accordance with original manufacturer specifications and drawings, adhering to strict quality standards including ANSI/ESD S20.20 for electrostatic discharge control and a total prohibition of metallic mercury to prevent contamination on submarines and surface ships. Delivery is required within 111 days on a FOB Destination basis, with all items physically identified and packaged according to MIL-STD-129, MIL-STD-130, and MIL-STD-2073. Due to the nature of the equipment, the contractor must possess a government security clearance and authorized access to Secret level classified documents as detailed in DD Form 254. Award evaluations will be based on Supplier Performance Risk System assessments regarding item, price, and supplier risk. The contractor must maintain inspection records for 365 days following final delivery and utilize the Wide Area Workflow system for electronic invoicing. Additional compliance is required for cybersecurity maturity model certification and the detection and avoidance of counterfeit electronic parts.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAF8
Solicitation N0010426QYAF8, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a request for quotations for the manufacture and delivery of a Circuit Card Assembly (NSN 5998-01-616-3772). The procurement requires strict adherence to Technical Data Package version 002 and mandates that the supplier maintain a quality system compliant with ISO 9001 or MIL-I-45208. Key technical requirements include compliance with ANSI/ESD S20.20 for electrostatic discharge control and a strict mercury-free mandate for use on submarines and surface ships. The contract includes an option for additional quantities up to 100 percent for 365 days after receipt of the order. The government will evaluate offers based on the Supplier Performance Risk System, focusing on item, price, and supplier risk, while prioritizing U.S.-made or qualifying country end products. Award consideration is limited to original equipment manufacturers or authorized distributors who can provide a signed letter of authorization. Deliverables must be marked per MIL-STD-129 and packaged according to MIL-STD-2073-1, with specific packing levels based on the destination. Inspection and acceptance will occur at the origin, and all payment requests must be processed electronically through the Wide Area Workflow system. Following two amendments, the final response deadline for offers is October 28, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAES
Solicitation NO0104-26-Q-YAES is a small business set-aside request for quotations issued by the Department of the Navy, NAVSUP Weapon Systems Support Mech, for the manufacture and delivery of circuit card assemblies (NSN 5998-01-577-3862). The required items must conform to the design represented by Cage Code 03538 and reference number 77C733426G1, utilizing TDP Version 002. Key technical requirements include strict adherence to ANSI/ESD S20.20 for electrostatic discharge control and a total prohibition of metallic mercury to prevent corrosion and toxicity on submarines and surface ships. The contract specifies a delivery timeline of 180 days with FOB Destination terms and requires a one-year warranty from the date of delivery. The procurement process includes several critical compliance and quality standards. Items must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073, with specific labeling requirements for Depot Level Repairable items. Inspection and acceptance will occur at the origin, with the contractor holding primary responsibility for quality assurance. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization on OEM letterhead. Evaluation of quotes will be based on Supplier Performance Risk System assessments, focusing on item, price, and supplier risk. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAF9
Solicitation N00104-26-Q-YAF9, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks quotations for the manufacture and delivery of a circuit card assembly, identified by NSN 5998-01-680-8202 and Cage Code 03538. The requirement is processed under Emergency Acquisition Flexibilities and is DO certified for national defense. The government maintains an option to order an additional quantity of up to 100 percent of the original order at the same price for 365 days after receipt of order. The closing date for the receipt of offers has been extended to November 05, 2026. The contractor must adhere to strict quality and technical standards, including ISO 9001 quality system requirements and ANSI/ESD S20.20 for electrostatic discharge control. Supplies must be mercury-free and packaged according to MIL-STD-2073-1 and marked per MIL-STD-129. Delivery is required within 180 days, FOB Destination, with inspection and acceptance occurring at the origin. A one-year warranty from the date of delivery is required for these noncomplex supplies. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization on the OEM's letterhead to be considered for award. Invoicing and payment will be processed electronically via Wide Area Workflow.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # SPRPA127QZA36
Solicitation SPRPA127QZA36, issued by DLA Aviation at Philadelphia, is a request for quotations for five newly manufactured Circuit Card Assemblies (NSN 5998-01-728-8235). This procurement is designated for Critical Safety Items (CSI) and Critical Application Items (CAI), requiring strict adherence to quality management standards such as AS/EN/JISQ 9100 or an equivalent system. The government will make a single award based on the most advantageous offer, with past performance weighted as more important than price. Proposals are due by November 6, 2026, and must be submitted to the primary point of contact, Naseem Aoun. The contract mandates that all supplies be newly manufactured; refurbished or repaired materials are ineligible for award. Offerors must be government-approved sources of supply, and authorized distributors must provide a formal authorization letter on the source's letterhead at the time of proposal. Technical requirements include strict packaging and marking standards per MIL-STD-2073 and MIL-STD-129, with specific electrostatic discharge protection required for sensitive items. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and receiving reports, with delivery terms set as FOB Destination.
Pa DLA Aviation At Philadelphia

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAEQ
This solicitation, issued by NAVSUP Weapon Systems Support, is for the manufacture and procurement of a circuit card assembly under NAICS code 334412. The requirement is processed under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The government maintains an option to order an additional quantity of up to 100 percent for 365 days after receipt of the order at the same price. The resultant award will be issued bilaterally, requiring written acceptance from the contractor. Key technical requirements include strict adherence to electrostatic discharge control standards and a total prohibition of metallic mercury contamination, as the items are intended for use on submarines and surface ships. Quality assurance must comply with MIL-I-45208 or ISO 9001 standards, and the contractor is responsible for all inspection requirements. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization from the OEM to be considered. The solicitation closing date was extended via Amendment 0001 to September 23, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 3 months
View Details
NAICS: 334412
New
Federal
CCA,COMPUTER
Solicitation # N0010427QLA02
Solicitation NO00104-27-Q-LA02 is a Request for Quotations issued by the NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of a Computer CCA (NSN 5998-01-600-9910). The contractor is required to ensure the repaired item meets all operational and functional requirements using approved repair standards and manuals. Key performance metrics include a required Repair Turnaround Time (RTAT) of 170 days, measured from the physical receipt of the asset to final government acceptance. The contract mandates Government Source Inspection (GSI) and requires the contractor to maintain inspection records for 365 days following final delivery. Compliance requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-129 and MIL-STD-2073-1 for packaging and marking. All shipments are FOB Origin, and electronic invoicing must be processed through the Wide Area Workflow system. Award consideration is limited to authorized distributors of the original manufacturer, with evaluations based on price and past performance as tracked via the DoD Supplier Performance Risk System. Additionally, offerors must provide CMMC unique identifiers and comply with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 335999
New
Federal
INSULATING COMPOUND,ELECTRICAL
Solicitation # CM26161009
This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334310
New
Federal
HEADSET-MICROPHONE : NSN 5965-01-204-8505
Solicitation # SPE7MX26RX089
This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.
Audio and Video Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
Hatch, Marine
Solicitation # SPE7MX26RX102
DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.
Hardware Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332999
New
Federal
Supplier for Component NSN 015715718This subcontract through DLA Land and Maritime requires the manufacture or distribution of 603 units of hardware component NSN 015715718. The supplier must ensure all components meet strict government specifications, including the application of MIL-STD-129 markings and the use of standard commercial packaging. Additionally, the provider is required to submit proof of commerciality in accordance with FAR Part 12. The completed materials are to be delivered to prime contractors located in Columbus, Ohio. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 29, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 19 hours
View Details
NAICS: 332999
New
Federal
Supplier for Component NSN 016603400This subcontract with DLA Land and Maritime requires the manufacture or distribution of 1,169 units of hardware component NSN 016603400. The supplier must ensure all components comply with government specifications and are delivered to Columbus, Ohio. The contractor is responsible for applying MIL-STD-129 markings and utilizing standard commercial packaging. Additionally, the supplier must provide proof of commerciality in accordance with FAR Part 12. This requirement falls under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 19 hours
View Details
NAICS: 332999
New
Federal
Oshkosh Wholistic Sole Source Project
Solicitation # 75Q65
DLA Land and Maritime, specifically the Strategic Acquisitions office, is conducting market research for a potential Indefinite Delivery Indefinite Quantity (IDIQ) long term contract under solicitation 75Q65. The project focuses on the procurement of components and support for the Oshkosh MRAP-All Terrain Vehicle (M-ATV), including SOCOM variants and Mine Resistant Vehicles. Required items encompass a wide range of vehicular components, such as structural body parts, mechanical and electrical systems like wiring harnesses and fluid filters, and various specialized hardware and mounting brackets. While Oshkosh Defense is currently the only approved source, the agency is seeking additional manufacturers capable of producing these items. The procurement will be evaluated and awarded on a per NSN/CLIN basis, with specific requirements for standard commercial packaging and MIL-STD-129 markings. Interested parties must submit a Market Research Questionnaire by October 28, 2026, providing details on their business size, manufacturer status, and distribution networks. The performance location is listed as Columbus, Ohio, and the effort falls under NAICS code 332999. Estimated buy quantities have been identified for various components, though a total contract value has not yet been established.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 19 hours
View Details
NAICS: 332212
Federal
Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.
Hand and Edge Tool Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 339999
Federal
Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.
All Other Miscellaneous Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 333618
Federal
Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.
Other Engine Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 332710
Federal
Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.
Machine Shops

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 333618
Federal
MULTI NSN DIESEL ENGINE
Solicitation # CM26259595
DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.
Other Engine Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 332912
Federal
VALVE, REGULATING, FL
Solicitation # CM26163006
DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

9 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 334412
Closed
DIBBS
Electronic Components Assembly (ESD-Sensitive)
MARITIME SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 334412
Closed
DIBBS
ELECTRONIC COMPONEN
Solicitation # SPE7M1-26-T-218L
MARITIME SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 334412
Closed
DIBBS
Circuit Card Assembly (CCA) Manufacturing and Testing
MARITIME SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 334412
DIBBS
Printed Circuit Board Supply for Defense Systems
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 334412
Closed
DIBBS
Supply of NVIDIA Circuit Card Assembly (CCA) MCX653106A-ECAT/ECAT-SP
ACTIVE DEVICES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 334412
Closed
DIBBS
Circuit Card Assembly Manufacturing
MARITIME SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 334412
Closed
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-181L
MARITIME SUPPLY CHAIN

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 334412
Awarded
DIBBS
PRINTED CIRCUIT BOARD
Solicitation # SPE7L126FAU6F
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 334412
Awarded
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE7L126FAU6D
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 334412
Closed
Federal
59--CIRCUIT CARD ASSEMB- AND SIMILAR REPLACEMENT PARTS
Solicitation # N0038324QA186
Navsup Weapon Systems Support

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 334412
Closed
Federal
66--COMM IND,OTBD
Solicitation # N0010426QYAAH
Navsup Weapon Systems Support Mech

POSTED

3 months ago

CLOSED

2 months ago
View Details
NAICS: 334412
Closed
Federal
CIRCUIT CARD ASSEMBLY
Solicitation # SPRDL1-26-R-0147
DLA Land Warren

POSTED

3 months ago

CLOSED

3 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS