Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

59--SWITCH,PRESSURE

Active

SPE7M826T5851Federal

Response Deadline08/17/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense through DLA Land and Maritime is seeking quotes for 34 pressure switches with NSN 5930011786407, with 33 units required for delivery to DLA Dist San Joaquin within 348 days after contract award and one unit to be delivered within 90 days. All responsible suppliers may submit electronic quotes, and submissions must be received by the deadline of August 17, 2026. The solicitation is open under a combined solicitation type with no designated set aside, targeting vendors classified under NAICS code 332919 for other electrical equipment and components manufacturing. The contracting office is based in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact, with additional details available through the SAM.gov portal using the solicitation number SPE7M8526T5851.

General Info

34 pressure switches requested, delivery within 348 days, one in 90 days, quotes due August 17, 2026.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 6

Combined Synopsis

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 5930011786407 SWITCH,PRESSURE: Line 0001 Qty 33 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0348 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0090 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

59--SWITCH,PRESSURE

Solicitation # SPE7M526T374F

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 11 units of the pressure switch with NSN 5930008400253, to be delivered to DLA Distribution Depot Oklahoma within 168 days of award. This procurement is conducted under solicitation number SPE7M526T374F, which was posted on August 6, 2026, with responses due by August 17, 2026. Only approved sources—09049 42D49C and 81205 10-3269-10—are eligible to respond, and all quotations must be submitted electronically through the SAM.gov portal; hard copies are not accepted. No technical specifications, plans, or drawings are provided, and the solicitation is open to all responsible sources that submit timely quotes. The procurement falls under NAICS code 332919 and is managed from the office in Columbus, Ohio. Any questions must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided link or via the DIBBS website using the solicitation number.

DLA Land And Maritime

POSTED

about 7 hours ago

DEADLINE

ADAPTER ASSEMBLY CM

Solicitation # N0010426QBC08

The contract pertains to the procurement of an ADAPTER ASSEMBLY CM under solicitation N0010426QBC06, with a closing date extended to June 18, 2026, and pricing valid for 60 days after submission unless otherwise specified. All technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which dictates the order of precedence for conflicting documents, with contract amendments and schedules taking priority over drawings, specifications, and standards. Contractors must comply strictly with the revision levels cited in the IRPOD and may not mix revisions without written approval from the contracting officer. The IRPOD is mandatory and accessible via the BPMI e-Commerce portal, requiring pre-registration and password authentication; vendor review of the IRPOD is compulsory. Technical documentation is marked NOFORN and subject to export controls, with distribution restricted to U.S. entities unless prior approval is obtained from Naval Sea Systems Command. Packaging must adhere to MIL-PRF-23199 and MIL-STD-2073 where applicable, with green poly bags permitted only when cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar standards are invoked, and fire-retardant materials are no longer required. Mercury or mercury-containing compounds are prohibited from direct contact with supplied hardware. Quality assurance responsibilities are defined entirely within the IRPOD, requiring contractors to maintain complete inspection records available to the government throughout performance and beyond. Pre-manufacturing submissions, including procedures and drawings, must be submitted within 45 days after contract award and certified according to DI-QCIC-8871, while post-production test and inspection reports must be submitted at contract end per DI-QCIC-8872, both in separate packages keyed to each unique contract line item. All contractual documents are deemed issued upon electronic transmission or mail delivery, and submissions must follow WAWF or alternative electronic means. Pricing must be clearly stated with validity period, and deviations or delays require formal justification including technical evaluation of impact on form, fit, function, and quality, reviewed by the Government Quality Assurance Representative before forwarding to the post-award contracting officer. Compliance with cybersecurity maturity certification, small business set-aside, priority rating for national defense, and security prohibitions under recent deviations is mandatory.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010426QZB70

This contract pertains to the procurement of a Compartment Salvage Ball Valve for critical shipboard use, designated as SPECIAL EMPHASIS Level I material due to its direct impact on vessel safety, where failure could result in catastrophic loss of life or ship. The valve and its components must strictly conform to specific Navy drawings including 4558705, 4558706, and others, with precise material requirements for parts such as the body, tube, ball, stems, studs, nuts, and seats, each governed by military and industry standards like QQ-N-281, MIL-T-16420, ASTM-B150, SAE AMS 6931, and MD71-GG Mearthane. All materials require traceable certification, with chemical and mechanical tests verified through Objective Quality Evidence, and mandatory certifications including Liquid Penetrant, Ultrasonic, and Dye Penetrant Inspections as specified. Material traceability is enforced from raw stock to finished component via permanent, legible markings meeting MIL-STD-792, with strict controls to prevent commingling and ensure documentation integrity. Non-metallic components such as elastomeric seats must meet exact hardness, tensile, and absorption properties per ASTM standards and be sourced exclusively from approved suppliers. All manufacturing and assembly processes must adhere to detailed specifications including welding and brazing requirements under S9074-AQ-GIB-010/248 and 0900-LP-001-7000, with procedure and welder qualification data subject to prior government approval. Thread forming is restricted to cutting, and lubricants containing molybdenum disulfide are prohibited due to seawater degradation risks; instead, Anti-galling compound A-A-59004 is mandated. The Contractor must maintain an ISO-9001-compliant quality system with calibration procedures aligning to ISO-10012 or ANSI-Z540.3, and is subject to Government Quality Assurance at source. Final acceptance requires 100% inspection of certification documents, traceability markings, and non-destructive test results, with zero defect tolerance for lot acceptance. All fasteners must be uniquely marked with material symbol, manufacturer ID, and traceability number, while Teflon coatings and seat dimensions must comply with specific drawing notes and CSD references. The contract mandates full compliance with Buy American provisions, Small Business set-asides

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 2 months

Brand Name for Swagelok O-RINGs

Solicitation # N0040626Q0465

The Fleet Logistics Center Puget Sound is seeking quotations for Swagelok O-rings under a brand-name solicitation due to intellectual property restrictions, with the requirement designated as a Small Business Set Aside for total procurement. Interested parties must respond by the deadline of August 13, 2026, using the solicitation number N0040626Q0465 in all correspondence, and submissions will be evaluated based on technical capability including delivery date, price, and past performance, with no single factor assigned higher priority. The contracting officer, Sara Robinson, will assess offerors for responsibility using criteria outlined in RFO 12.203, focusing on price reasonableness and prior performance, and the award is anticipated for August 2026. All responsible sources, particularly small businesses, are eligible to submit quotes, and the government retains full discretion to determine whether the requirement will proceed as a competitive acquisition based on responses received. The procurement is managed under NAICS code 332919 by the Department of Defense through the Naval Supply Systems Command.

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 7 hours ago

DEADLINE

PILOT VALVE ASSY

Solicitation # SPRMM126QKF84

This solicitation, issued by the Defense Logistics Agency (DLA) Mechanicsburg under solicitation number SPRMM126QKF84, seeks the manufacture and delivery of a PILOT VALVE ASSY, with all contractual obligations governed by stringent quality, inspection, and compliance requirements. The contract mandates adherence to MIL-STD-130 Rev N for part marking, prohibits any mercury or mercury contamination in materials due to the sensitive naval applications, and requires strict control over design changes through a defined code system, with only Code 1 changes permitted without formal approval. All items must be sourced from authorized distributors with documented proof of authorization, and contractors must comply with the mandatory use of WAWF for electronic invoice and receiving report submissions. Inspection is to occur at source, and the government retains the right to inspect and reject non-conforming materials at any time, with records of all quality assurance activities retained for 365 days after final delivery. The contract is subject to the Lowest Price Technically Acceptable evaluation method and issued under Emergency Acquisition Flexibilities authority, indicating urgency and constrained procurement pathways. The contractor must be registered in the PIEE EDA system to view orders and modifications, and all communications must be directed to the designated primary point of contact, with mandatory inclusion of the CAGE code 99517 and part number 12052302-1. Subcontractors are bound by the same mercury-free and quality assurance clauses, and any proposed changes to production facilities require written approval and a $250 administrative cost reduction. Compliance with the CMMC Level 1 self-assessment certification and the Small Business Program Representations under NAICS code 332919 is required, alongside adherence to all specified packaging standards under MIL-STD-2073. The solicitation emphasizes electronic submission, with exceptions to solicitation terms requiring immediate follow-up documentation; failure to disclose deviations may result in award based strictly on original requirements, with cost deductions applied for post-award changes. Contractors are also directed to register for automated notifications through NAVSUP WSS to track contract issuances and ensure timely compliance with all procedural and technical obligations.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QND42

This contract pertains to the supply of a pressure reducing valve housing designated as SPECIAL EMPHASIS Material (Level I/SUBSAFE), intended for critical use in shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must conform strictly to Marotta drawing 281712-0001 and meet exhaustive quality, traceability, and certification requirements outlined in multiple military and industry specifications including MIL-STD-1330, FED-STD-H28, QQ-N-281, and S9074-AQ-GIB-010/248. All materials must be oxygen cleaned, chemically and mechanically analyzed, and traceable from raw stock through final fabrication with unique heat-lot identifiers permanently marked on the part or securely affixed if surface area is insufficient. Welding, brazing, and thread inspection must follow approved procedures with prior submission and Government approval of all qualification data, and no cold-formed internal threads or mercury-containing compounds are permitted. The contractor is required to maintain a certified quality management system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, subject to Government audit at any time. All material certifications, including nondestructive testing and weld certifications, must be submitted electronically via WAWF with explicit traceability to individual units, bearing positive, unqualified statements of compliance and electronic signatures that meet strict authentication protocols. No material may be shipped without prior review and acceptance by the Portsmouth Naval Shipyard, and all submissions must be routed through WAWF with designated shipping, inspection, and acceptance identifiers. The contract is issued under Emergency Acquisition Flexibilities, is DO-certified under DPAS, and requires strict adherence to Buy American and small business subcontracting requirements. Any deviation or waiver must be formally requested, classified as Critical, Major, or Minor, and approved by the Contracting Officer. The contractor must also ensure subcontractors comply with all quality, traceability, and documentation standards, and maintain complete records for Government inspection.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Solicitation # SPE7MC26T177M

The contract seeks to procure four valve bodies under NSN 4820015354414 for delivery to DLA Distribution at location W1A8, with a required delivery timeline of 168 days after award. The only approved source for this item is identified as 71454 3268126-C1, and the solicitation is issued as a restricted RFQ under a Small Business Set Aside, meaning only qualified small businesses may respond. The procurement is administered by the DLA Land and Maritime office in Columbus, Ohio, under solicitation number SPE7MC26T177M, which was posted on August 6, 2026, with responses due by August 17, 2026. Quotes must be submitted electronically through the SAM.gov portal, and no hard copies of the solicitation or supporting documentation such as specifications, plans, or drawings are available. All responsible small business entities are encouraged to submit quotes if received by the deadline, and inquiries should be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.

DLA Land And Maritime

POSTED

about 7 hours ago

DEADLINE

VALVE,BUTTERFLY

Solicitation # SPRMM126QGE70

The contract pertains to the procurement of a butterfly valve under solicitation number SPRMM126QGE70, issued by DLA Mechanicsburg on behalf of the Department of Defense. This is a total small business set-aside requiring compliance with ISO 9001 quality standards and higher-level inspection protocols. The valve must meet MIL-STD-129 marking requirements and be free from metallic mercury and mercury contamination due to its intended use in submarine and surface ship systems; any use of mercury as a functional component requires prior written approval with detailed safeguards and warning labeling. The contractor must be the manufacturer or provide the OEM’s CAGE code and part number, and must submit a surplus certificate if offering surplus materials. All deliveries require electronic submission of receiving reports and invoices via WAWF, and packaging must comply with MIL-STD-2073. The requirement explicitly excludes drawings and technical data, and passive RFID tagging is only applicable if the ship-to location is designated under DFARS 252.211-7006, which currently has no active requirements. The contractor is solely responsible for inspection and quality assurance, with records to be maintained for four years post-delivery. Any design, material, or part number changes necessitate prior government approval and detailed documentation, classified under specific code categories. The offer must remain valid for at least 90 days, and compliance with all document references, including obsolete or cancelled standards obtained via DODSSP, is mandatory. Distributors must provide proof of authorization from the original manufacturer, and all communications and submissions must adhere to strict electronic protocols tied to the PIEE and EDA systems. Contractors are strongly encouraged to register for automated notifications through NAVSUP WSS to stay current on contract modifications and award notifications.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

STEM,FLUID VALVE

Solicitation # N0010426QND14

This contract pertains to the supply of a stem for a one-inch stop check valve, designated as special emphasis Level I material, critical to the safe operation of a shipboard system, where failure could result in catastrophic consequences including loss of life or vessel. The item must conform strictly to NAVSHIPS drawing 803-2177525 and material specification QQ-N-286, Class A, with stringent controls on chemical composition, mechanical properties, and traceability. No weld repair is permitted on QQ-N-286 material, and all certifications must reflect full compliance with specified standards, including ASTM-E18, FED-STD-H28, MIL-STD-792, MIL-STD-2035, and ISO-9001, among others. Testing and inspection requirements are exhaustive, requiring dye penetrant and ultrasonic inspection, slow strain rate tensile testing performed only by pre-approved laboratories, and hardness verification in accordance with specific correction factors and acceptance limits. All materials must bear permanent traceability markings linked to certification reports, and any alteration of material properties necessitates re-certification with a new traceability identifier. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration standards, subject to government audit at source. All subcontractors must adhere to the same rigorous controls, with prime contractor oversight required throughout the supply chain. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard for review and acceptance prior to shipment, with strict instructions for electronic submission and notification. Electronic signatures are acceptable if controlled and uniquely tied to the signatory. Each item must undergo 100% inspection for traceability, certification completeness, and conformance with zero-defect acceptance criteria, even for small lots. Mercury and mercury-containing compounds are strictly prohibited, and any deviations or waivers require formal approval from the Contracting Officer with classification as critical, major, or minor. Contract delivery is FOB destination, and the solicitation is part of an emergency acquisition under DPAS priority rating, with the award binding only upon bilateral acceptance. All data, including engineering change proposals and configuration controls, must be managed with government oversight, and documentation must be submitted in electronic formats as required.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QEC58

The contract pertains to the procurement of a tube fitting designated by part number 4-6 F5BU-M, supplied by Parker Hannifin Corp (CAGE 30780), under solicitation N0010426QEC58 issued by the Naval Supply Systems Command Weapon Systems Support Mechanical. The technical requirements are fully defined by the part number and associated procurement documentation, with no additional drawings or technical data provided. Compliance with specification revisions is mandatory, and any deviation from the stated requirements—including material, design, or delivery schedule—must be formally requested and justified in advance, with supporting technical data submitted for evaluation. The contractor must ensure the product is free of mercury or mercury-containing compounds, and packaging must adhere to MIL-PRF-23199 standards where cleanliness control is invoked, specifically utilizing MIL-DTL-24466 green poly bags only if the part falls under specified cleanliness criteria. A Certificate of Compliance per DI-MISC-81356 must be submitted with each delivery, alongside adherence to all applicable quality assurance and inspection protocols. The contract operates under a fixed-price structure with pricing valid for 60 days after the closing date, and all contractual documents are deemed officially issued upon electronic transmission or deposit in the mail. The ordering precedence hierarchy clearly establishes that amendments to the contract take priority over all other documents, followed by the schedule, terms and conditions, and then referenced standards. Federal mandates require compliance with cybersecurity maturity certification, small business set-aside provisions, veteran and disability equal opportunity policies, and national defense priority ratings. The contractor must also comply with mandatory use of the Workflow Pro mod assist module for payments and adhere to strict security prohibitions, including exclusion of restricted information from foreign nationals. Documentation must include accurate distribution statements per DoDI 5230.24, with delivery and data submission timelines aligned to the DD Form 1423 requirements, where final submission is due at contract end. The place of performance and point of contact are centralized at the NAVSUP WSS-MECH office in Mechanicsburg, PA, with primary correspondence routed through the designated contracting officer.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Solicitation # SPE7M326T7925

The contract seeks the procurement of one elbow hose with NSN 4730010925076, to be delivered to DLA Distribution Puget Sound within 168 days after order placement. Only two approved sources are designated for this item: FC7754-1010-188 under vendor 32142 and 19-00-9593 under vendor 96169. The solicitation is issued as a request for quotation under number SPE7M326T7925 and is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed. Technical specifications, plans, or drawings are not provided, and all responsible suppliers are invited to submit quotes as long as they are received prior to the deadline. Quotes must be submitted electronically, and the closing date for responses is August 17, 2026. The procurement falls under NAICS code 332919 and is managed by the Department of Defense through DLA Land and Maritime, with the contracting office located in Columbus, Ohio. All questions must be directed via email to the designated point of contact listed in the solicitation document, accessible through the SAM.gov link or DIBBS portal.

DLA Land And Maritime

POSTED

about 7 hours ago

DEADLINE

Solicitation # N0010426QEA20

The contract pertains to the procurement of a 5-inch elbow under solicitation N0010426QEA20, issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) Mechanical Division, with a response deadline of August 17, 2026. It incorporates a comprehensive set of federal and military requirements, including mandatory use of the Wide Area Workflow payment system, cybersecurity maturity certification, small business set-aside status, and strict compliance with inspection, packaging, and quality assurance standards defined in the Individual Repair Part Ordering Data (IRPOD). Technical documentation referenced in the IRPOD, drawings, and specifications—many marked NOFORN—must be obtained through the secured BPMI e-Commerce portal and adhered to in their full, cited revisions, with no partial use of document revisions permitted without explicit contracting officer approval. The order of precedence clearly establishes that contract amendments take priority over all other documents, followed by the schedule, terms and conditions, IRPOD, STRs, drawings, and specifications. Quality assurance is governed by the IRPOD, requiring the contractor to maintain a government-acceptable inspection system with full records retained for the contract duration and beyond. Packaging must comply with MIL-PRF-23199, particularly regarding heat-sealed envelopes for components subject to cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar standards, while fire-retardant packaging is explicitly no longer required. Mercury and mercury compounds are strictly prohibited from contact with supplied hardware. The contractor must submit pre-manufacturing procedures and test reports within 45 days of award and upon contract completion, using standardized DD Form 1423 sequences as specified in DI-QCIC-8871 and DI-QCIC-8872. All submissions must be prepared per unique contract, NSN, and item nomenclature combinations, and distribution of technical data is restricted based on DoD distribution codes, with foreign nationals explicitly prohibited from access without prior Naval Sea Systems Command authorization. The contracting officer must approve all deviations, delivery delays, or non-conformances with full justification and technical data supporting the proposed alternative.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

29--PUMP,HAND,FUEL PUMP

Solicitation # SPE7L526T4904

The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotations for 294 hand fuel pumps with NSN 2910014705545 under solicitation number SPE7L526T4904, which is a Small Business Set Aside with no small business size standard applied. The procurement is exclusively for responsible sources, and all quotes must be submitted electronically by the deadline of August 17, 2026. Delivery is required to W1A8 DLA Distribution within 153 days after award, and the approved source for this item is 15852 AP00314. The solicitation is issued as a combined solicitation, and no hard copies or detailed specifications, plans, or drawings are available. The North American Industry Classification System code for this requirement is 336310, and inquiries must be directed via email to the designated point of contact at DibbsBSM@dla.mil, with the full solicitation document accessible only through the Sam.gov portal.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

47--HOSE ASSEMBLY,NONMETAL

Solicitation # SPE7M426T320D

The contract solicitation is for the procurement of 11 units of a nonmetal hose assembly with NSN 4720012482251, to be delivered to DLA Distribution Cherry Point within 154 days after order placement. This is a source-controlled item requiring parts to be manufactured exclusively by the approved sources listed as 78570 and 99193, both using drawing number 3886075-2. All supplied items must strictly conform to the technical specifications detailed in the referenced drawing, and digitized versions of the drawing and associated military standards can be accessed electronically. The solicitation, identified as SPE7M426T320D, was posted on August 6, 2026, with quotes due by August 17, 2026, and is exclusively available online through the provided URL; no hard copies are distributed. Submission of quotes is mandatory through electronic means, and all responsible suppliers are invited to respond. The procurement is managed by the DLA Land and Maritime office in Columbus, Ohio, with all inquiries directed to the designated point of contact via email.

Fabric Coating Mills

POSTED

about 7 hours ago

DEADLINE

25--LADDER,VEHICLE BOARDIN

Solicitation # SPE7L426T6096

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for three vehicle boarding ladders identified by NSN 2540015932047 under solicitation number SPE7L426T6096. The requirement is for delivery to W1A8 DLA DISTRIBUTION with a mandatory delivery deadline of 168 days after order award. This procurement is issued as a combined solicitation open to all responsible sources, and responses must be submitted electronically via the SAM.gov portal; hard copies are not accepted. Digital access to drawings, military specifications, and standards is provided electronically, and no physical documentation will be furnished. The solicitation was posted on August 6, 2026, with a firm response deadline of August 17, 2026. The NAICS code 332999 applies, indicating the product falls under other fabricated metal product manufacturing. The contracting office is located in Columbus, Ohio, and all inquiries must be directed via email to DibbsBSM@dla.mil, with reference to the buyer listed in Block 5 of the solicitation document, accessible through the provided SAM.gov link or via the DIBBS website by entering the solicitation number. No set-aside classification is designated for this procurement, making it fully open to all qualified offerors.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE7M426T313T

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for NSN 5330015124594, a gasket, under solicitation number SPE7M426T313T, which is a Small Business Set Aside for total procurement. A total of 36 units are required, each to be delivered to W1A8 DLA DISTRIBUTION within 244 days after award. The approved source for this item is BLUE GYLON 3565, and quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. The solicitation, posted on August 6, 2026, has a response deadline of August 17, 2026, and is open to all responsible sources capable of meeting requirements. No specifications, plans, or drawings are available, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link or DIBBS website using the solicitation number. The NAICS code is 339991, and the procuring office is located in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

20--HATCH,RESTRAINT

Solicitation # SPE7M426T311X

The contract seeks the procurement of six hatch restraint units with NSN 2040013050618, to be delivered to DLA Distribution site W1A8 within 168 days after award. Only approved sources—0FB84, 38597, 563J1, and 8X044—all referencing part number 5223513-9—are eligible to submit quotes. The solicitation is issued as an RFQ under number SPE7M426T311X, with no hard copies available; all submissions must be made electronically through the SAM.gov portal. Technical specifications, plans, or drawings are not provided, and responsible sources are invited to quote even without access to detailed documentation. The opportunity is open without set-aside designation and falls under NAICS code 332510 for fabricated metal product manufacturing. The issuing organization is the DLA Land and Maritime office located in Columbus, Ohio, with inquiries directed to the listed primary point of contact via email. Quotes must be received by August 17, 2026, and the solicitation was posted on August 6, 2026.

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

43--HOOD ASSEMBLY FIBER

Solicitation # SPE7M126T259W

The procurement is for 3 units of the Hood Assembly Fiber with NSN 4310015843052, to be delivered to W1A8 DLA Dist San Joaquin within 168 days of award. The only approved source for this item is 50GK4 HC15871224, and the solicitation is issued as a Request for Quotation under solicitation number SPE7M126T259W. This acquisition is a Small Business Set Aside, Total, meaning only small businesses are eligible to compete, and it is classified under NAICS code 333912. All responsible sources may submit quotes electronically; hard copies are not available and no specifications, plans, or drawings are provided. Quotes must be submitted by the deadline of August 17, 2026, and the solicitation can be accessed solely through the online SAM.gov portal. The contracting activity is managed by the DLA Land and Maritime office located in Columbus, Ohio, with all inquiries directed via email to the designated point of contact.

Air and Gas Compressor Manufacturing

POSTED

about 7 hours ago

DEADLINE

53--CAP,PROTECTIVE,DUST AN

Solicitation # SPE7M426T317V

The contract solicitation is for 12 units of protective dust caps with NSN 5340010434078, to be delivered to the DLA Distribution Depot Hill within 168 days of award. The approved source is specified as 18740 SK3806-9, and the procurement is conducted through a Request for Quote, with no hard copies available—only electronic submission is permitted. The solicitation, identified by number SPE7M426T317V, is a Small Business Set Aside under NAICS code 332313, meaning only qualified small businesses may respond. All responsible sources may submit quotes if received by the deadline of August 17, 2026, but no specifications, plans, or drawings are provided. The procurement is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and the full solicitation document must be accessed electronically through the SAM.gov link provided.

Plate Work Manufacturing

POSTED

about 7 hours ago

DEADLINE

48--VALVE,GLOBE

Solicitation # SPE7MC26T172A

The solicitation seeks six globe valves with NSN 4820011469853 for delivery to DLA Distribution at location W1A8, with a required delivery timeline of 207 days after award. The approved source for this item is vendor 86184 with part number 62715J. This procurement is conducted as a Request for Quotation under solicitation number SPE7MC26T172A, which is exclusively available electronically through the provided SAM.gov link; no hard copies are provided and no specifications, plans, or drawings are included. All responsible sources may submit quotes, but submissions must be made electronically and received by the deadline of August 17, 2026. This is a Small Business Set Aside, total, under NAICS code 332911, intended to prioritize small business participation. The awarding agency is the Department of Defense under DLA Land and Maritime, based in Columbus, Ohio. For questions, interested parties must contact the designated buyer via email at DibbsBSM@dla.mil, as detailed instructions are only accessible through the solicitation’s Additional Information link or via the DIBBS website using the solicitation number.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

48--VALVE ASSEMBLY,MANI

Solicitation # SPE7MC26T180P

The contract pertains to the procurement of two valve assembly, mani units with NSN 4820014939617, to be delivered to W1A8 DLA DISTRIBUTION within 168 days of award. This is a source-controlled item requiring strict adherence to the approved drawing, with only H845-1801-B, identified by source code 96169, authorized for supply. The solicitation, numbered SPE7MC26T180P, is issued as a restricted small business set-aside under NAICS code 332911, and is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed. All quotes must be submitted electronically before the response deadline of August 17, 2026, and must fully comply with the drawing specifications and applicable military standards, which can be accessed digitally through official channels. The procuring agency is DLA Land and Maritime, based in Columbus, Ohio, and designated point of contact for inquiries is listed in the solicitation document under block 5, with email correspondence directed to DibbsBSM@dla.mil.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

25--PARTS KIT,DOOR LIFT

Solicitation # SPE7L326T164S

The contract seeks procurement of a Parts Kit, Door Lift with NSN 2590012121057 under solicitation number SPE7L326T164S, issued by the DLA Land and Maritime under the Department of Defense. A total of 793 units are requested across four line items: 22, 70, and 700 units in kit form (UI KT) to be delivered to DLA Distribution Albany within 157 days, and one unit in individual assembly form (UI EA) requiring delivery within 30 days. All quotes must be submitted electronically, and the solicitation is open to all responsible sources with no restrictions beyond the specified set-aside. This is a Small Business Set Aside designated as total, meaning only small businesses may respond, and it falls under the NAICS code 336992 for other transportation equipment manufacturing. The response deadline is August 17, 2026, and all inquiries must be directed via email to the designated point of contact. The contract office is located in Columbus, Ohio, and performance is to be fulfilled at DLA Distribution Albany regardless of the vendor’s location.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

16--HOUSING,AIR OUTLET,

Solicitation # SPE7M426T323V

The contract solicitation seeks the procurement of five air outlet housings with NSN 1660015252213, to be delivered to the DLA Distribution Depot in Oklahoma within 168 days after award. The approved source for this item is identified as 99251 1657297-1. This is a competitive RFQ issued under solicitation number SPE7M426T323V, with responses required to be submitted electronically by the deadline of August 17, 2026. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided to offerors. All responsible sources are encouraged to submit quotes, and timely submissions will be considered without restriction. The opportunity falls under NAICS code 336413 and is managed by the Department of Defense through DLA Land and Maritime, with the contracting office located in Columbus, Ohio. Inquiries must be directed via email to the point of contact listed, and further details about the solicitation can be accessed through the provided SAM.gov link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE