Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

5G Radio & Infrastructure Equipment Supplier

Open

SBIR / STTR

Response Deadline12/02/2026, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled 5G Radio and Infrastructure Equipment Supplier, supports Office of the Secretary of Defense rural connectivity projects by providing physical radio hardware and antenna systems to prime contractors. The scope of work includes the provision of CBRS Category B radios, the design of coverage and backhaul architecture for wide-area rural environments, and the calculation of link-budget margins specifically for crop-canopy attenuation. The supplier is responsible for ensuring all equipment and installations comply with FCC CBRS regulations and must deliver fully operational hardware at the designated test site. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334220, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Posted on November 4, 2026, the response deadline for this requirement is December 2, 2026.

General Info

Small business subcontract for 5G radio hardware and infrastructure for OSD rural connectivity.

Agency

Department of Defense → Office of the Secretary of Defense

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

Not specified

Set-Aside

SBA

Documents

This scope was carved out of OSW27BZ02-DV005.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Resilient Tactical Edge Networks

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineDec 2

Submission deadline

Response Deadline

12/02/2026, 05:00:00 AM UTCin 23 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment of Defense → Office of the Secretary of Defense

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment of Defense → Office of the Secretary of Defense

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and configures physical radio hardware and antenna systems for prime contractors on Office of the Secretary of Defense (OSD) rural connectivity projects. Provisions CBRS Category B radios, designs coverage and backhaul architecture for wide-area rural environments, and calculates link-budget margins for crop-canopy attenuation. Ensures compliance with FCC CBRS regulations. Delivers installed and operational radio hardware at the test site.

Similar Contracts

Same NAICS industry code

Solicitation # 53-27

Solicitation 53-27 is a request for bid issued by the New Hampshire Department of Administrative Services for the procurement of HP XPD Antenna equipment. The required hardware consists of 8-foot diameter antennas made of galvanized steel, supporting 5-7 GHz bands with dual polarization and CPR137G flange types. The equipment must be new and of the current model year, capable of surviving wind speeds between 155 and 343 mph. Each unit must include three anchor brackets, a radome deflection kit, three 3m strut pipes, and three tower clamp kits. The award will be granted to the responsible vendor providing a conforming bid at the lowest total cost, with the state serving as the sole arbiter of specification compliance. Deliveries must be completed FOB Destination within 30 days of receiving a purchase order. Vendors are required to be registered to conduct business in New Hampshire and must provide a DUNS or SAM.gov number. Environmental compliance is emphasized, requiring the use of environmentally preferable materials and the elimination of PVC or polystyrene where possible. Additionally, vendors must provide material safety data sheets per the Worker's Right to Know Act and notify the state if products contain mercury or PFAS. Payment will be processed via ACH 30 days after the invoice is received and the items are accepted. Bids must be submitted by November 13, 2026, and must include a signed transmittal letter, a completed offer sheet, and initialed pages.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 3 hours ago

DEADLINE

Avionics/Electronics Repair Services (Display Unit)This subcontract for Avionics/Electronics Repair Services involves performing depot-level repair and overhaul of Display Units for prime contractors supporting US Navy projects. The work is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency. The contractor is required to deliver fully repaired and certified units while adhering to standard repair practices, manuals, directives, and technical orders. Technical execution must strictly follow Technical Data Package version O02 and comply with MIL-STD-129 for all physical identification and marking requirements. The opportunity falls under NAICS code 334220, with a response deadline set for November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Solicitation # N0010426QSD51

This contract outlines the requirements for the manufacture and supply of the Antenna Bicone, specifically identified by Cage Code 14304 and reference number RF-9070. The contractor is responsible for ensuring all items meet the specified design and quality standards, including physical identification according to MIL-STD-130 and packaging in accordance with MIL-STD 2073. Any changes to design, materials, or part numbers require written approval from the NAVICP-MECH Contracting Officer, unless the change is a simple part number update. The contractor maintains full responsibility for inspection and quality assurance, with the requirement to keep all inspection records for 365 days following final delivery. The government reserves the right to perform its own inspections to ensure compliance. Additionally, award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. All provided documents and drawings are subject to specific distribution statements to control the safeguarding of information.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Solicitation # N0010427QXA21

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPRPA126QRC61

This presolicitation notice from the Department of Defense, specifically the DLA Aviation office in Philadelphia, is for the procurement of six antennas under NSN 7R-5985-015838968-CB. The delivery terms are FOB Origin. Due to the flight-critical nature of the items and the specialized technical data and manufacturing knowledge required, the government intends to negotiate with a single source under FAR 6.302-1. Because of these strict quality and safety requirements, engineering source approval from the design control activity is mandatory prior to contract award. While the government is targeting previously approved sources, other responsible parties may submit proposals or capability statements within 45 days of publication. Unapproved sources must provide comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for the award.

Pa DLA Aviation At Philadelphia

POSTED

about 5 hours ago

DEADLINE

Sensitive Switch Manufacturer/SupplierThis subcontract involves the manufacture or procurement of 86 units of sensitive switches, identified by NSN 015285061 and FSC 5930, for prime contractors supporting the Department of Defense DLA Weapons Support Electrical Devices Division. The supplier is responsible for ensuring all units meet strict DLA technical and quality standards, with final delivery required by August 26, 2027. The agreement operates under FOB Origin delivery terms and requires the supplier to be capable of submitting quotes through the DIBBS system. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 334220.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 24 hours ago

DEADLINE

Radio Frequency Amplifier FabricationThis subcontract involves the fabrication of two fully functional Radio Frequency Amplifiers for the Department of Defense, specifically supporting the DLA Weapons Support Active Devices Division. The manufacturer must produce the units in strict accordance with Reference Drawing NR 18876 Revision G and part numbers 11476018 or SXA3930, corresponding to NSN 5996-01-464-6295. Performance of the contract will take place in New Cumberland. To be eligible, the contractor must meet rigorous security standards, including a CMMC Level 2 self-assessment and full compliance with NIST SP 800-171 cybersecurity requirements. The opportunity was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 334220.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

Electronic Frequency Converter Fabrication and SupplyThis subcontract involves the fabrication and supply of five electronic frequency converters for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support ASC Supplier OE and AF Division. The selected provider is responsible for manufacturing the units according to a specific technical data package and integrating electronic components to ensure all frequency conversion specifications are met. Performance of the contract takes place at Robins Air Force Base and requires strict adherence to the DLA Master List of Technical and Quality Requirements for Critical Application Items. The project falls under NAICS code 334220, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Infrared Collimator SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, involves the procurement of five specialized infrared collimators identified by NSN 1240016220044. The selected provider is responsible for manufacturing or sourcing the end items to ensure they meet all technical specifications, while also providing the necessary associated technical documentation. The contract requires strict adherence to federal standards, specifically mandating shipment and storage marking according to MIL-STD 129 and the provision of Safety Data Sheets per Federal Standard No. 313. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 334220.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Receiver-Transmitter, Light SignalThis subcontract involves the manufacture or sourcing of 33 units of the Receiver-Transmitter, Light Signal (NSN 6030016131153) for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The selected contractor is responsible for ensuring all hardware meets strict government technical specifications and adheres to DFARS 252.204-7018 regulations concerning covered defense telecommunications equipment. Logistical compliance is mandatory, requiring adherence to DLA Packaging Requirements (RP001) and MIL-STD-129 for all shipment and storage marking. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 334220.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 24 hours ago

DEADLINE

Supply of Amplifier Subassemblies (NSN 5996-00-126-6139)This subcontract involves the procurement of 26 Amplifier Subassemblies for the Department of Defense, specifically under the DLA Weapons Support Active Devices Division. The contractor is responsible for manufacturing or sourcing hardware that meets the technical specifications for NSN 5996-00-126-6139, ensuring full compatibility with Symetrics Industries P/N 109152-3 or Ateez Corp P/N A228200. The project requires strict adherence to Critical Application Item quality standards and mandates the disclosure of any non-domestic materials used in production. Performance for this contract will take place at Hill AFB, with the final deliverable being 26 finished amplifier subassemblies.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

Antenna Supply (NSN 5985-01-512-6107)This subcontract involves the manufacture or procurement of two specialized antennas meeting NSN 5985-01-512-6107 specifications for the DLA Weapons Support Active Devices Division. The selected provider must ensure all units are packaged according to RP001 and MIL-STD-129 standards and that hazardous material labeling complies with 29 CFR 1910.1200. Final delivery of the antennas is required at the designated facility in New Cumberland, Pennsylvania. To be eligible, contractors must complete a CMMC Level 2 Self-Assessment and maintain strict compliance with the Buy American and Balance of Payments Program. This opportunity falls under NAICS code 334220 and requires a response by November 19, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department of Defense → Office of the Secretary of Defense

Same awarding agency

Computational Modeling of ENZ Optical ModulatorsThis subcontract, titled Computational Modeling of ENZ Optical Modulators, supports the Office of the Secretary of Defense in the research and development of nanophotonic structures. The scope of work involves performing physics-based simulations to model optical field confinement and electro-optic phase and amplitude modulation at near-ENZ wavelengths. Utilizing FDTD software or COMSOL Multiphysics, the contractor is responsible for designing compact, power-efficient device architectures optimized for ultrafast switching, ultimately delivering geometric specifications, simulation reports, and design artifacts. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically adhering to SBIR/STTR mandates for firms with fewer than 500 employees. Interested parties must respond by December 2, 2026, to provide specialized computational modeling services for prime contractors operating under the Department of Defense.

Engineering Services

POSTED

DEADLINE

High-Temperature and High-Irradiation Optical TestingThis subcontract, titled High-Temperature and High-Irradiation Optical Testing, supports Office of the Secretary of Defense R&D projects by providing environmental stress testing and optical characterization for prime contractors. The scope of work involves conducting thermal stability testing up to 800 degrees Celsius and laser irradiation resilience testing up to 10 MWcm-2. Utilizing high-power laser systems and MWIR spectrometers, the contractor will measure switching speeds and optical losses in Near-IR and MWIR windows, ultimately delivering technical test reports and measured data sets. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically targeting firms with fewer than 500 employees in accordance with SBIR/STTR mandates. Interested parties must submit their responses by the deadline of December 2, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Synthesis and Fabrication of Epsilon-Near-Zero (ENZ) MaterialsThis subcontract, titled Synthesis and Fabrication of Epsilon-Near-Zero (ENZ) Materials, supports research and development projects for the Office of the Secretary of Defense. The scope of work involves the supply and fabrication of specialized thin films, specifically focusing on the deposition of corrugated Indium Tin Oxide films and the creation of waveguide or metal-insulator-metal structures. These processes utilize nanolithography and high-temperature deposition systems to ensure material stability in air at temperatures reaching 800 degrees Celsius. The selected provider is responsible for delivering physical material samples along with comprehensive characterization data, including certifications for material purity and thickness. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate for companies with fewer than 500 employees, falling under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Precision Component SupplierThe Precision Component Supplier subcontract, issued by the Office of the Secretary of Defense, seeks a provider to supply specialized materials or custom-fabricated parts for Department of Defense research and development projects. The selected contractor will be responsible for manufacturing and delivering specific hardware or chemical components essential for prototype development, ensuring all deliverables strictly adhere to the technical specifications outlined in the prime contractor's Technical Volume. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, requiring the contractor to have fewer than 500 employees. Interested parties must submit their responses by December 2, 2026, for this procurement categorized under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Laboratory Testing and Certification ProviderThe Laboratory Testing and Certification Provider subcontract, issued by the Office of the Secretary of Defense, requires a provider to supply testing facilities and perform critical environmental and safety certifications for prime contractors on Department of Defense R&D projects. The scope of work includes testing for radiation levels, hazardous material handling, waterborne effluents, and airborne emissions. The selected provider must ensure all facilities comply with federal, state, and local environmental laws and is responsible for delivering safety data sheets, certification reports, and environmental compliance documentation. This opportunity is a total small business set-aside under NAICS code 541380, specifically mandated for SBIR/STTR entities with fewer than 500 employees. The solicitation was posted on November 4, 2026, with a response deadline of December 2, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Research Institution PartnerThis subcontract opportunity is issued by the Office of the Secretary of Defense for a Research Institution Partner to support prime contractors on Department of Defense STTR projects. The selected partner will be responsible for conducting high-level theoretical and fundamental research, providing academic validation, and utilizing specialized instrumentation and university-grade laboratory facilities. Key deliverables include theoretical frameworks, laboratory test results, and peer-reviewed data. To be eligible, the applicant must be a qualified research institution according to STTR guidelines. This is a Total Small Business Set-Aside under the SBIR/STTR mandate for entities with fewer than 500 employees, categorized under NAICS code 541715. The solicitation was posted on November 4, 2026, with a response deadline of December 2, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Technical Research & Development SpecialistThis subcontract opportunity is for a Technical Research and Development Specialist to support prime contractors on Department of Defense SBIR/STTR projects under the Office of the Secretary of Defense. The selected party will be responsible for conducting research, developing prototypes, and performing technical analysis to determine the feasibility of proposed concepts. Key deliverables include the execution of the Phase I approach as outlined in the Technical Volume, as well as the submission of technical reports, prototype components, and validated data. The opportunity is designated as a Total Small Business Set-Aside, specifically mandating a firm with fewer than 500 employees under NAICS code 541715. Interested parties must submit their responses by December 2, 2026. Further details regarding the specific topics and application process can be found through the official DoD SBIR/STTR portal.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Rural Test Site Host & Field Operations SupportThe Rural Test Site Host and Field Operations Support subcontract is an SBA Total Small Business Set-Aside opportunity issued by the Department of Defense for the Office of the Secretary of Defense. The contract requires the provision of a physical location, such as an operating farm, ranch, or agricultural research facility, to support prime contractors during prototype integrations. Key responsibilities include facilitating the movement of instrumented vehicles across various fields and roads to validate mobility and coverage, as well as delivering essential site access and site fidelity documentation for MVP demonstrations. This opportunity is specifically designated for small businesses with fewer than 500 employees under the SBIR/STTR mandate, falling under NAICS code 531120. Interested parties must respond by December 2, 2026, to provide the necessary logistical support and land access required for these critical defense prototype tests.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

Agricultural IoT & Autonomous Systems IntegratorThis SBA total small business set-aside subcontract supports the Office of the Secretary of Defense on Ag-Tech projects. The scope of work involves supplying and integrating end-user devices and applications for prime contractors, specifically focusing on the deployment of autonomous field equipment, livestock wearables, soil sensors, and irrigation command-and-control systems. Additionally, the contractor is responsible for configuring machine vision and teleoperation video streams, as well as managing UAS for imagery backhaul. The ultimate objective of the contract is to deliver a functional use-case demonstration of agricultural operations enabled by 5G technology. This effort falls under NAICS code 541330 and is subject to SBIR/STTR mandates, requiring the performing entity to have fewer than 500 employees. The response deadline for this opportunity is December 2, 2026.

Engineering Services

POSTED

DEADLINE

5G Network Security & Compliance SpecialistThis subcontract opportunity for a 5G Network Security and Compliance Specialist supports prime contractors on Office of the Secretary of Defense 5G projects. The scope of work focuses on security hardening and the implementation of zero-trust architecture based on NIST SP 800-207 principles. Key technical requirements include establishing encrypted fronthaul, maintaining CVE monitoring, and conducting CMMC Level 2 self-assessments in accordance with 3GPP TS 33.501 standards. The project culminates in the delivery of a security validation report and a live demonstration of the implemented security capabilities. The solicitation is designated as a total small business set-aside under NAICS code 541519, specifically adhering to SBIR/STTR mandates for firms with fewer than 500 employees. Interested parties must submit their responses by December 2, 2026. This effort is managed through the Department of Defense for the Office of the Secretary of Defense.

Other Computer Related Services

POSTED

DEADLINE

Open-Source 5G Network Software EngineeringThis small business subcontract for the Office of the Secretary of Defense focuses on the engineering, development, and integration of open-source private 5G and FutureG software stacks. The scope of work involves the implementation and configuration of critical components including OCUDU, SD-Core, SD-RAN, and OSC. A primary technical objective is the development of 5G network slicing to support sensor telemetry and video backhaul, ensuring strict slice-based traffic isolation and quality of service enforcement. All technical deliverables must adhere to O-RAN WG11 and 3GPP TS 33.501 standards, culminating in the delivery of a Reference Configuration Package. This opportunity is designated as a total small business set-aside under NAICS code 541511, with a response deadline of December 2, 2026.

Custom Computer Programming Services

POSTED

DEADLINE

Lithographic Patterning Strategy & Process DevelopmentThis subcontract, titled Lithographic Patterning Strategy and Process Development, supports the Office of the Secretary of Defense by conducting lithographic patterning and integration research for prime contractors. The primary objective is to identify and develop viable methods for patterning hyperbolic thin films into device-grade architectures utilizing nano-imprint systems, photolithography, or electron-beam technology. Additionally, the contractor is responsible for creating integration plans specifically for quantum light source architectures or microelectronics. The project culminates in the delivery of a comprehensive technical report and a Phase II integration plan. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541330, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. The solicitation was posted on November 4, 2026, with a response deadline of December 2, 2026.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS