Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Pre-Solicitation opportunity from Department Of Defense was posted on February 7, 2011. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

61--SOLE SOURCE - MAINTENANCE AND OPERATIONAL CAPABILITY FOR 20 READY POWER PACK FUEL CELLS IN 20 FORKLIFT TRUCKS

Awarded
N0016411T0077Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a response deadline set for November 4, 2026. Interested parties must submit their responses by the specified cutoff date via the official supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 3 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & Repair
Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Fisher Recirculation Valve and Actuator DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
WEG Industrial Motor DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Sulzer Boiler Feedwater Pump DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Pump Refurbishment (Add-Alternate No. 3)
Nassau Community College

POSTED

about 12 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
WINDOW AY — 1680016170785 — N0038327QAA17
Solicitation # N0038327QAA17
Solicitation N0038327QAA17, issued by Navsup Weapon Systems Support for the Department of the Navy, seeks a contractor for the teardown, evaluation, repair, and modification of two window assemblies, identified by NSN 1680-01-617-0785. The requirement covers an induction period of one year from the date of the order, with a delivery timeframe of 90 days and shipping terms set as FOB Destination. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's location. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073 and MIL-STD-129, with specialized labeling requirements for Depot Level Repairable items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting standards.
Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Annual And Periodic Inspections And Maintenance And Repair Services Of Port Authority Trans-Hudson Corporation (Path) Emergency Diesel And Natural Gas Generators -Three Year Contract
Solicitation # 2140379
The Port Authority of New York and New Jersey is soliciting bids for a three-year contract to provide annual and periodic inspections, maintenance, and repair services for emergency diesel and natural gas generators used by the Port Authority Trans-Hudson Corporation (PATH). This procurement, identified by solicitation number 6000003543 and NIGP code 28539, is focused on stationary generators. A pre-bid meeting will be conducted via Microsoft Teams on November 9, 2026, from 10:00 a.m. to 11:00 a.m. ET to review the requirements and solicitation documents. Bids must be submitted electronically through the Euna portal by the deadline of November 18, 2026. The Port Authority emphasizes a commitment to non-discrimination in accordance with Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. Procurement operations are managed from 150 Greenwich Street, 21st Floor, New York, New York, and interested parties can contact the Procurement Operations Bid/RFP Custodian via email at [email hidden] or by phone at [phone hidden] for assistance.
The Port Authority of New York and New Jersey

POSTED

about 12 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Commercial Kitchen Equipment Repair ServicesThis subcontract for Commercial Kitchen Equipment Repair Services involves providing inspection, diagnosis, and repair of kitchen machinery for prime contractors working on Arizona Department of Corrections, Rehabilitation & Reentry facility projects. The selected provider is responsible for troubleshooting equipment according to industry standards and manufacturer specifications, supplying all required tools and diagnostic equipment, and ensuring all machinery is fully operational through a final visual walkthrough. Due to the nature of the work locations, personnel must obtain and maintain necessary security clearances to access secured prison perimeters. This opportunity is categorized under NAICS code 811310, with a response deadline of December 18, 2026.
Arizona Department of Corrections

POSTED

about 17 hours ago

DEADLINE

in about 2 months

General Info

Agency

Department Of Defense → Nswc Crane

Contract Value

$32,000.04

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

IN

Set-Aside

NONE

Awardee

NUVERA FUEL CELLS LLC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Presolicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
ContactsNo contacts available
OfficeCRANE, IN, 47522-5001, USA
Organization / AgencyDepartment Of Defense → Nswc Crane
Office AddressCRANE, IN, 47522-5001, USA
ContactsNo contact information available

Full Description

Show more
This synopsis is being posted to the Federal Business Opportunities (FBO) website located at http://www.fbo.gov, the Navy Electronic Commerce on Line (NECO) website located at https://www.neco.navy.mil/, and the Naval Surface Warfare Center, Crane Division, Acquisition website located at http://www.navsea.navy.mil/nswc/crane/working/contracting . FBO is the primary point of entry to be used when access to synopses and solicitations from the World Wide Web is required. However, the NECO webpage as well as the Naval Surface Warfare Center, Crane Division, Acquisition webpage serve as alternatives if the FBO website is unavailable. The Naval Surface Warfare Center (NSWC) Crane Division plans to enter into a firm fixed price contract with Nuvera Fuel Cells, Inc, 129 Concord Road, Billerica, MA. 01821-4600, for maintenance and operational capability of 20 Ready Power Pack Fuel Cells powering 20 forklift trucks at the Defense Depot Susquehanna, PA. (DDSP). Place of Performance is F.O.B. Destination: Defense Depot Susquehanna, (DDSP), 2001 Mission Drive, New Cumberland, PA. 17070-5000. This requirement will be negotiated on a sole source basis in accordance with the statutory authority 10 U.S.C. 2304(c)(1) as implemented by FAR 6.302-1; only one responsible source and no other supplies will satisfy agency requirements. The basis for restricting competition is Nuvera Fuel Cells, Inc.’s proprietary technical information and the duplicative cost to the Government that it would not expect to be recovered through competition. Since this is a Sole Source procurement, a solicitation will not be posted to the internet. Responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. It is the responsibility of the offeror to submit quotes to the Point of Contact (POC) at NSWC Crane. The POC is Teresa A Crevier, Code CXMTN at Tel: +1 (555) 000-0000 or email: contact@example.gov. Reference the above solicitation number when responding to this notice. Contracting Office Address: Code CXMTN, Building 64 300 Highway 361 Crane, IN 47522-5001

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 336510
New
Federal
Railcar Fabrication & AssemblyThis subcontract for Railcar Fabrication and Assembly supports NSWC Crane strategic weapons transport projects under the Department of Defense. The scope of work involves the manufacture of physical flatcar structures for prime contractors, specifically focusing on the fabrication of railcar frames and decks. Utilizing industrial machining and heavy-duty welding, the contractor must ensure deliverables meet a maximum weight of 99,200 lbs and a gross rail load of 286,000 lbs. The final objective is the delivery of fully assembled and commissioned flat railcars that are approved for operation on U.S. rail networks. This opportunity falls under NAICS code 336510, with a response deadline set for November 25, 2026.
Railroad Rolling Stock Manufacturing

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 333998
New
Federal
Hydraulic Cushioning Systems Supply & IntegrationThis subcontract involves the supply and integration of specialized hydraulic end cushioning systems for prime contractors working on NSWC Crane railcar projects. The selected provider is responsible for manufacturing or sourcing high-capacity hydraulic dampers and cushioning units that strictly adhere to the strike-down and performance criteria specified in Drawing WS20972A and the System Requirements Document. The scope of work requires the delivery of fully installed and tested hydraulic cushioning systems for each individual railcar unit. This Department of Defense effort falls under NAICS code 333999 and requires responses by November 25, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
Federal
Railcar Structural Engineering & DesignThis subcontract for Railcar Structural Engineering and Design supports NSWC Crane strategic weapons transport projects through the provision of detailed engineering design and structural analysis for flat railcars. The scope of work requires the development of designs that strictly adhere to AAR-M1001 Section C, Part II, Drawing 5681514, and Drawing WS20972, with a specific technical requirement to calculate G-load and strike-down performance of 355 kips. The selected contractor will be responsible for delivering comprehensive approved design packages, detailed engineering drawings, and a final Bill of Materials. This effort falls under NAICS code 541330 and is managed under the Department of Defense for the NSWC Crane agency.
Engineering Services

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 488111
New
Federal
Rail Logistics & Specialized TransportThis subcontract for Rail Logistics and Specialized Transport involves the transport and delivery of commissioned railcars for prime contractors supporting NSWC Crane projects. The scope of work requires the management of heavy-haul rail transport for railcars from the point of origin to specific government destinations, including Strategic Weapons Facility Atlantic, Strategic Weapons Facility Pacific, or the Eastern Range. The opportunity is issued by the Department of Defense under NAICS code 488111. Interested parties must adhere to the timeline associated with the October 26, 2026, posting date, with a response deadline set for November 25, 2026.
Air Traffic Control

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 423510
New
Federal
Specialized Steel & Material SupplyThis subcontract for Specialized Steel and Material Supply supports NSWC Crane railcar projects by providing high-strength steel and raw materials to prime contractors. The scope of work involves the delivery of certified high-yield structural steel and AAR-certified alloys to a fabrication facility, ensuring all materials meet the specific weight and structural strength requirements for a Gross Rail Load of 286,000 lbs in accordance with AAR-M1001 standards. Managed under the Department of Defense, this opportunity falls under NAICS code 423510. The solicitation was posted on October 26, 2026, with a response deadline set for November 25, 2026.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 27 days
View Details
NAICS: 484220
New
Federal
Specialized Freight and Delivery ServicesThis subcontract for Specialized Freight and Delivery Services involves the secure transport and delivery of 82 high-value precision shims for prime contractors supporting the Naval Surface Warfare Center Crane. The contractor is responsible for utilizing secure transport vehicles to prevent warping or damage, ensuring all units are delivered to the NSWC Crane Supply Operations Building 41 in Crane, Indiana. The operation must adhere to strict regulatory standards, including MIL-STD-129 for shipment labeling and FOB Destination terms as defined by FAR 52.247-34. Classified under NAICS code 484220, this Department of Defense project requires precise execution to maintain the integrity of the precision components during transit.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332710
New
Federal
Precision Metal Shim Supply (P/N: BRFLX0800X4800X.125-2)This subcontract involves the manufacture and supply of 82 precision-engineered shims, specifically part number BRFLX0800X4800X.125-2, for prime contractors supporting the Naval Surface Warfare Center Crane. The contractor is required to utilize specialized tooling to ensure all units meet exact dimensions and tolerances as specified. The agreement mandates strict adherence to military standards, specifically MIL-STD-130 for item marking and MIL-STD-129 for shipment labeling. All deliverables are to be provided FOB Destination to the performance site in Crane, Indiana, under NAICS code 332710.
Machine Shops

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 325510
New
Federal
Conductive Primer and Aerospace Coating SupplyThis subcontract involves the supply of aerospace-grade conductive primers, base coats, and top coats to support prime contractors on NAVAIR/NSWC Crane projects. The materials must be specifically formulated to meet the technical specifications for LRIP 3 radome shells and are to be delivered to the GDMS Marion facility. Managed under the Department of Defense for NSWC Crane, the contract falls under NAICS code 325510. The scope of work focuses on the delivery of required quantities of specialized primer and paint materials to ensure compliance with aerospace standards for the designated performance location in Crane.
Paint and Coating Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 611519
New
Federal
Radome Painting Process TrainingThis subcontract for the Department of Defense at NSWC Crane involves providing specialized technical training for prime contractors on LRIP 3 radome shell painting processes. The scope of work includes instructing personnel on surface preparation, the application of conductive primers, base coats, and top coats, as well as comprehensive inspection protocols. Training is conducted using industrial painting equipment and a scrap shell to ensure practical proficiency. The project requires a completed training course spanning four to five days, culminating in a final inspection of the training shell. To be eligible, the provider must maintain CMMC compliance and strictly adhere to all OEM standards. The performance of these services will take place in Crane, Indiana.
Other Technical and Trade Schools

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 484220
New
Federal
MIL-STD Compliant Shipping and DeliveryThis subcontract involves the transport and delivery of uniquely identified military hardware for prime contractors supporting Naval Surface Warfare Center Crane projects. The service provider is responsible for labeling all shipments and storage containers in strict accordance with MIL-STD-129 and must utilize automatic identification technology devices to verify that all marks are machine-readable. The scope of work requires the delivery of four units to DoDAC N00164, with the final destination being the Supply Operations Bldg 41 at NSWC Crane. The contract is executed as FOB Destination and is categorized under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
Federal
Jacob Clutch Backstop Supply (P/N 6154770 / 6154770-002)This subcontract involves the supply of four specialized Jacob Clutch Backstops for prime contractors supporting Naval Surface Warfare Center Crane projects. The selected provider is responsible for manufacturing or distributing components according to Drawing 6154770 to ensure strict adherence to form, fit, and function requirements for specific davit designs. Additionally, all items must feature two-dimensional data matrix symbology marking in compliance with MIL-STD-130. To be eligible for this contract, the provider must maintain CMMC Level 2 certification and hold a valid Joint Certification Program registration. The work is categorized under NAICS code 336413 and will be performed in Crane, Indiana. The response deadline for this opportunity is November 2, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 336510
New
Federal
N0016426RGW20-PROCUREMENT OF DESIGN AND PRODUCTION OF FLAT RAILCARS-PSC 2220- NAICS 336510
Solicitation # N0016426RGW20
Solicitation N0016426RGW20, issued by the NSWC Crane Warfare Center, is an IDIQ contract for the design, testing, and production of NSWC AIM Flatcars. The project has a contract maximum quantity of nine railcars, which must be fully commissioned and approved for rail use by the Association of American Railroads (AAR) in accordance with AAR-M1001 Section C, Part II. Key technical specifications include a lightweight car requirement of 116,000 pounds, truck axle loads not exceeding 60,000 pounds per axle, and adherence to WS20972 and MIL-SPC-810 for load securement. The period of performance is structured over five years from the date of award, with delivery costs to be evaluated across three Strategic Weapons Facility locations. The procurement process has undergone seven amendments, resulting in several extensions of the proposal deadline, with the final closing date set for November 25, 2026, at 2:00 PM EST. Significant modifications include updates to the Statement of Work, a reduction in the number of Contract Data Requirement Lists (CDRLs), and revisions to the System Requirements Document to adjust shipping weights and strikedown loads. The government will evaluate proposals based on delivery pricing and past performance on related railcar design and manufacture contracts, including commercial and non-federal experience. Government Furnished Property, including Active Inert Missiles and shipping fixtures, is designated for support with delivery dates targeted for September 20, 2027.
Railroad Rolling Stock Manufacturing

POSTED

3 days ago

DEADLINE

in 27 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
Open/Inspect/Report Yanmar Diesel Engine
Solicitation # HSCG40-11-Q-5AR011
Sflc Procurement Branch 3(00040)

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 811310
Federal
Modification to Purchase Order N0040611P1068
Solicitation # N0040611P1068
Navsup Flt Logistics Ctr Puget Sound

POSTED

over 15 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Closed
Federal
Mega Lift Maintenance
Solicitation # holt-F3Z1890348AQ01
FA4427 60 Cons Lgc

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 811310
Awarded
Federal
Emergency Generator Repair
Solicitation # RFQP03131100007
Fci Talladega

POSTED

over 15 years ago

CLOSED

almost 16 years ago
View Details
NAICS: 811310
Closed
Federal
Annual Chiller Stop Inspection
Solicitation # F1Z3121007A002
FA3030 17 Cons Cc

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 811310
Federal
Security Covers for White Systems Vertical Carousel Model #36416-144F
Solicitation # F2DCCR0341A002

POSTED

over 15 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Awarded
Federal
Technical Representative-Low Pressure Air Compressor Overhaul
Solicitation # N40442-11-T-7298
Military Sealift Flt Supp Command Norf

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 811310
Awarded
Federal
36--STRATASYS CONSUMABLE MATERIALS
Solicitation # M6700411T0069
Commander

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 811310
Awarded
Federal
Maintenance and repair of incinerator plat at Camp Zama, Japan
Solicitation # FA5209-10-T-0258
FA5209 374 Cons Pk

POSTED

over 15 years ago

CLOSED

almost 16 years ago
View Details
NAICS: 811310
Closed
Federal
99--MARKET SURVEY CAPABILITY ASSESSMENT FOR CONTRACTOR DEPOT LEVEL SUPPORT (CDLS) FOR KOHLER EQUIPMENT AND SERVICES
Solicitation # 10385
6973GH Franchise Acquisition Svcs

POSTED

over 15 years ago

CLOSED

over 15 years ago
View Details
NAICS: 811310
Federal
J--VALVE,FLOW CONTROL, IN REPAIR/MODIFICATION OF
Solicitation # N0010408GA7631019
Navsup Weapon Systems Support Mech

POSTED

almost 16 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Closed
Federal
Preventative Maintenance/Walk In Freezers/Cold Rooms
Solicitation # RFQLDQ004405
Fbi-Jeh

POSTED

almost 16 years ago

CLOSED

over 15 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS