Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

6150-- New MRI Uninterrupted Power Supply (UPS)

Active
36C24E22Q0249Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Regional Procurement Office EAST (RPO EAST) of the Department of Veterans Affairs plans to negotiate a sole source contract with Siemens Medical Solutions USA, Inc. to acquire specific brand name equipment compatible with existing Siemens MRI systems. The procurement includes one Eaton 93PM-180 kW Uninterruptible Power Supply (UPS) system designed for full system backup without interruption, featuring an electronics cabinet with integrated maintenance bypass, a single battery cabinet providing a five-minute full-load backup, a network card, and a 24/7 Eaton warranty, with an optional remote monitoring panel. Additionally, the contract includes one Eaton 93PM Remote Monitoring Device, a wall-mounted display panel to monitor UPS status when located remotely within the facility, equipped with a Power Xpert Gateway Mini-Slot Card for UPS interface. This notice is a formal intent and is not a request for competitive quotes but invites all responsible sources interested in providing the equipment to notify the contracting officer by September 1, 2022, at noon EST via email only. Telephone responses are not accepted. After assessing the responses, the contracting officer will decide whether to proceed with competitive procurement or continue with sole source negotiations. This contract, titled "6150-- New MRI Uninterrupted Power Supply (UPS)" and identified by solicitation number 36C24E22Q0249, is managed by the RPO EAST office based in Pittsburgh, PA, with Bridget Kornish as the point of contact.

General Info

RPO EAST plans sole source contract with Siemens for Eaton UPS system compatible with MRI.

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

1

Notice of Intent to Sole Source - Eaton UPS for Siemens MRI

DOCX, Low priority1 page · sources-sought
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
Posted

special-notice

Notice updated

NAICS code changed from 221118 to 335999. The notice description changed.

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → Rpo East (36C24E)
Contacts1 person available
OfficePITTSBURGH, PA, 15212, USA
Office AddressPITTSBURGH, PA, 15212, USA
Contacts
Bridget KornishContracting Officer

Full Description

Show more
The RPO EAST (Regional Procurement Office EAST) intends to negotiate on a sole source basis with Siemens Medical Solutions USA, Inc., 40 Liberty Boulevard, Malvern, PA 19355 to obtain the following brand name equipment that is compatible with the existing Siemens MRI equipment. 1 ea. Eaton 93PM-180 kW UPS: Complete system backup without interruption. -Eaton 93PM UPS Electronics Cabinet w/integrated maintenance bypass sidecar -Eaton 93PM Single Battery Cabinet System (Full load back-up time @ 180kW of 5.1 minutes.) - Network Card - Eaton (24x7) warranty through Eaton Corp - Optional Remote Monitoring Panel 1ea. Eaton 93PM Remote Monitoring Device: -Eaton 93PM Remote Monitoring Device: Wall-mounted display panel for monitoring the UPS status in the imaging suite when the UPS is located elsewhere in the facility. Includes Power Xpert Gateway Mini-Slot Card for interface with the 93PM UPS. -RMP Dimensions: 5.9 W x 0.8 D x 3.2 H -RMP Weight: 0.5 Lbs. This notice of intent is not a request for competitive quotes. All responsible sources who wish to identify their interest and capability to provide this equipment must notify this Contracting Officer at contact@example.gov NLT Thursday September 1, 2022, by Noon EST. Telephone responses will not be accepted. Upon receipt of the interested parties' notification, the Contracting Officer will determine whether to conduct a competitive procurement or proceed with sole source negotiations.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Veterans Affairs → Rpo East (36C24E)

Same awarding agency

NAICS: 541714
Federal
AJ12--Development/Production - Kidney GEC-Specific AAV Vector
Solicitation # 36C24E27Q0009
The Department of Veterans Affairs is issuing a Sources Sought notice to identify capable vendors for the development and production of a kidney glomerular endothelial cell specific adeno-associated virus AAV vector. This project, funded by a VA ORD Merit award, aims to create a homing peptide enabled vector platform to target the glomerular endothelium to treat kidney injury and disease while reducing off target transduction. The scope of work is divided into three primary tasks: the engineering and incorporation of targeting peptides into the AAV capsid, testing vector binding and internalization in kidney tissue slices, and evaluating the specificity and efficiency of the modified vector through bioluminescence imaging and in vivo biodistribution studies. Qualified contractors must possess extensive onsite resources, including BSL 2 laboratories, specialized DNA and RNA facilities, and advanced instrumentation such as the Agilent Fragment Analyzer and various qPCR platforms. Vendors must demonstrate proven success in animal and human cell vector delivery and maintain full compliance with AAALAC and FELASA health standards. The government requires quarterly reporting, weekly videoconferences, and biannual face to face meetings. All generated data will be subject to Government Purpose Rights, and contractors must adhere to strict federal records management and information security protocols. Interested parties must submit a capability statement, relevant literature, and socio economic status details under NAICS 541714 by November 4, 2026.
Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

9 days ago

DEADLINE

in 5 days
View Details
NAICS: 339113
Federal
6636--Research Equip (LAMb) - Automatic Bedding Dispensers - LA | EDA: 9/25/26
Solicitation # 36C24E26Q0071
The Department of Veterans Affairs is seeking market information for an automated Animal Bedding Dispenser to support laboratory animal care operations at the VA Greater Los Angeles Healthcare System in North Hills, California. The equipment must deliver bedding to mouse and rat cages with a throughput capacity of up to 750 cages per hour, featuring dual dispensing modes for single and double cages, adjustable volume control, and compatibility with various cage sizes and bedding types. The system must be constructed with a 304 stainless steel interior and powder-coated steel exterior, incorporate H13 HEPA filtration with airflow between 120–160 cfm, maintain noise levels not exceeding 65 dBA, and include motion sensors and jam prevention features. Technical compliance requires certifications including CE, UKCA, and ETL, and the product must align with NAICS code 339113 and PSC 6636. Delivery is required at the specified location under a white glove service model, encompassing uncrating, installation, startup, and removal of packaging materials. The estimated delivery date is September 25, 2026, though this is not a binding contract date as the current document is a presolicitation sources sought notice for gathering industry feedback. The contracting office is the Veterans Health Administration Regional Procurement Office East in Pittsburgh, Pennsylvania, with JD Cooley as the primary point of contact. While no formal pricing, CLIN structure, or contract value is provided, the government is evaluating potential set-asides for small businesses, including HUBZone, 8(a), SDB, WOSB, SDVOSB, and VOSB concerns, and seeks capability statements limited to two pages to assess vendor qualifications. Domestic manufacturing preference is expressed, and submissions must be delivered electronically to the provided email address, with future formal solicitations expected to be posted via SAM.gov.
Surgical Appliance and Supplies Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS