Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on August 14, 2002. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

63--Research and Development

Closed
DAAB1502R1003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The Department of Defense intends to award a Firm Fixed Price contract to American Science and Engineering Inc. for the design, installation, testing, and maintenance of a prototype fixed site cargo inspection system. Located at the US Navy Port in Honolulu, Hawaii, this project supports a Research, Development, Test and Evaluation objective to assess Z-Backscatter X-Ray imaging technology. The system must be capable of detecting contraband in complex cargo, penetrating 10 inches of solid steel and 7.5 feet of water, and processing at least 20 containers per hour. Technical requirements include dual imaging capabilities with a minimum resolution of 2.5mm, a footprint under 900 square feet, and the ability to operate in tropical environments without exclusion zones beyond the inspection tunnel. The project is structured into two phases spanning 18 months to 2 years, beginning with a site survey and procurement of long-lead items, followed by system integration, installation, and maintenance. Due to the proprietary nature of the technology, the award is being pursued on a non-competitive basis. No formal solicitation will be issued, as the contract will be developed jointly between the government and the vendor.

General Info

DoD awarding American Science and Engineering a cargo inspection system prototype in Hawaii.

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

Place of Performance

US Army Communications-Electronics Command, CECOM Acquisition Center Washington ATTN: AMSEL-AC-WA-A, 2461 Eisenhower Avenue Al, VA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc
ContactsNo contacts available
OfficeALEXANDRIA, VA, 22331-0700, USA
Office AddressALEXANDRIA, VA, 22331-0700, USA
ContactsNo contact information available

Full Description

Show more
NA The Product Manager, Physical Security Equipment (PM-PSE) proposes to acquire the design, installation, testing, and maintenance of a prototype fixed site cargo inspection system in support of a Department of Defense (DoD) Research, Development, Test and E valuation (RDT&E) objective to evaluate backscatter X-Ray imaging technology on an other than full and open competitive basis. Pursuant to 10 U.S.C. 2304(c)(1) award is intended for American Science & Engineering Inc. (AS&E), Billerica, MA, who is deemed t o be the only respon-sible source because of proprietary rights to Z-Backscatter technology. The prototype will be installed at the US Navy Port, Honolulu, HI, and will be evaluated for its ability to meet the following objectives: detect threat mate-rial and contraband hidden in complex cargo loads, with penetration utilizing electrically generated X-Rays; capability to penetrate at least 10 inches of solid steel and 7.5 feet of water (penetration means a 2 inch X 4 inch X 8 inch lead brick can be detected in an image in either case); provide dual imaging capabilities utilizing transmission X-Ray Imaging with minimum resolution of 2.5mm and Back-scatter Imaging with inspection from both sides of the cargo and images simul-taneously and spatially registered with the transmission image; images pre-sented using powerful image presentation and enhancement tools such as sharpen, mark-and-annotate, and density expansion; capable of inspecting a minimum of 20 trucks loaded with 20 foot containers per hour utilizing bi-directional scan-ning; no subsystem or component shall be fixed, i.e. not movable within ten (10) minutes in any way such that it cannot be moved to allow normal traffic flow through the area of its operation; comply with radiation standards for a Cabi net Level System and be capable of operation without any exclusion zones other than the inspection tunnel; capable of operation by two people; capable of operation in typical subtropical or tropical environmental conditions, ex-cluding extreme weather cond itions such as typhoon; not occupy an area greater than 900 square feet. The project will be completed in two phases over a period of 18 months to 2 years. Phase 1 will consist of the conduct of a site sur-vey and procurement of long-lead time items requir ed. Phase II shall consist of the integration and installation, test, and maintenance of the system. The Government anticipates a Firm Fixed Price contract, which will be developed jointly between the Government and AS&E consistent with Alpha contracting procedures contained in the Federal Acquisition Regulation (FAR). Therefore, a formal solicitation wil l not be issued. Specifica-tions, plans or drawings related to this procurement are not available and cannot be furnished by the Government. This notice of intent is not a request for competitive proposals. However, interested persons may identify their in terest, fully identify their capability, and submit (via e-mail) responses or comments to contact@example.gov within fifteen (15) calendar days of publication of this synopsis. Point of Contact Mary Byrd +1 (555) 000-0000 Email your questions to US Army Communications-Electronics Command, CECOM Acquisition Center Washington at contact@example.gov

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc

Same awarding agency

NAICS: 335999
Federal
Power Distribution and Illumination Systems, Electrical (PDISE)
Solicitation # W909MY27RA001
The Department of the Army, through the Army Contracting Command-Aberdeen Proving Ground, has issued a Sources Sought and Request for Information for the build-to-print manufacture, assembly, and delivery of Power Distribution and Illumination Systems, Electrical (PDISE). These ruggedized, man-portable systems are designed to connect mobile power generation to mission equipment in harsh tactical environments. The potential requirement focuses on four specific configuration items: the M200 and M100 A/P Feeder Systems, the M40 A/P Distribution System, and the M46 Utility Assembly. All production must strictly adhere to Government Technical Data Packages and military standards, including MIL-DTL-53126 for general specifications, MIL-DTL-53072 for Chemical Agent Resistant Coating, and MIL-DTL-22992 for Class L connectors. The government is utilizing this market research phase to identify qualified large and small business sources under NAICS codes 335999 and 335313. Key areas of interest include industry production capacity, lead times for long-lead materials, and the ability to perform First Article Testing (FAT) within 360 days after contract award. Interested vendors must provide a detailed response by November 6, 2026, including corporate experience, technical capabilities, quality certifications such as ISO 9001:2015 or AS9100D, and Rough Order of Magnitude pricing for quantity ranges between 1 and 200 units. This information will be used to determine the final acquisition strategy and the feasibility of a small business set-aside.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

10 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS