This Government Contract opportunity was posted on February 8, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

65--Laparoscopic Systems

Awarded

VA26312R1349Federal

Submission Closed02/08/2013, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333314

New

Federal

Optical Component Supply (Grids and Light Sources)This 8(a) sole source subcontract with the Department of the Air Force involves the manufacture and supply of internal physical grid elements and integrated light sources for scientific instrument projects. The scope of work requires the production of precision etched grids and high-intensity stable light sources that adhere to NASA-licensed design optical tolerances, culminating in the delivery of a fully integrated assembly to prime contractors. The project is categorized under NAICS code 333314 and will be performed at Wright Patterson AFB. Interested parties should note the posting date of October 28, 2026, with a response deadline set for November 2, 2026.

Department Of The Air Force

POSTED

DEADLINE

Ultra Highspeed Camera SupplierThis subcontract involves the procurement of two scientific-grade ultra highspeed cameras to support prime contractors on research projects at Florida State University. The hardware is specifically intended for use in aerodynamics and fluid dynamics investigations that require extremely highspeed imaging capabilities to meet rigorous technical research standards. The opportunity was posted on October 26, 2026, with a response deadline of November 10, 2026. Classified under NAICS code 333314, the contract is managed through Florida State University and focuses on the delivery of specialized imaging equipment essential for high-level scientific analysis.

Florida State University

POSTED

DEADLINE

Supply of Compound Pressure-Vacuum GaugesThis subcontract involves the procurement or manufacture of six dial-indicating compound pressure-vacuum gauges matching NSN 6685-00-872-4760 for prime contractors under DLA supply contracts. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place in New Cumberland. The selected provider must ensure all units are packaged according to MIL-STD-2073-1E and delivered to the designated destination point. Compliance with FAR and DFARS regulations is mandatory, and the contractor must maintain an active SAM registration to be eligible. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Hyperspectral CamerasThis subcontract agreement involves the manufacture and supply of high-resolution hyperspectral imaging cameras to support prime contractors engaged in research projects at Texas A&M AgriLife Research. The scope of work requires the production and delivery of complete camera hardware, specifically including hyperspectral sensors, optical lenses, and camera housing, with a strict requirement that all sensors adhere to specified spectral range and resolution standards. The opportunity was posted on October 23, 2026, with a response deadline of November 6, 2026. Classified under NAICS code 333314, the contract focuses on the technical delivery of specialized imaging equipment to facilitate advanced academic and agricultural research within the state of Texas.

Texas A&M AgriLife Research

POSTED

DEADLINE

Manufacture of Observation Windows (NSN 9340013261731)This subcontract involves the manufacture of 18 precision observation windows (NSN 9340013261731) for the Department of Defense DDSP New Cumberland Facility. The windows must be fabricated to specific dimensions of 6.125 inches in length, 5 inches in width, and 0.125 inches in thickness, strictly adhering to Navy drawing 1582AS124 and utilizing source-controlled processes. Materials must be rated for temperatures ranging from -55°C to 65°C, and the production process requires the use of precision polishing equipment. Compliance requirements include CMMC Level 2 certification and adherence to the Buy American Act. Finished products must be packaged according to ASTM D3951 and MIL-STD-129 standards. The performance of this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Bearing Unit Housing Manufacturer/SupplierThis subcontract involves the manufacture and supply of 24 palletized Bearing Unit Housings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for ensuring all parts meet the specific requirements of NSN 3130004614748 and are completely free of mercury compounds in accordance with IP056. Performance of the contract takes place in San Diego, California, and requires strict adherence to RP001 DLA Packaging Requirements for Procurement regarding palletization. The opportunity was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 333314.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Optical Filter Wheel and Protective Housing SupplierThis subcontract involves the supply of specialized optical accessories for prime contractors supporting Air Force Institute of Technology projects. The scope of work requires the delivery of a four-position user-configurable filter wheel designed for one-inch filters, along with three blank filter holders and ruggedized protective transit cases intended for the lens, instrument, and associated computers. Managed by the Department of Defense under the FA8601 Aflcmc Pzio agency, the contract is categorized under NAICS code 333314. Performance of the contract will take place at Wright Patterson Air Force Base. The solicitation was posted on October 14, 2026, with a response deadline set for October 29, 2026.

POSTED

DEADLINE

146650 UNIT, INTERFACE, DIGITAL OPTICAL

Solicitation # 232069

The Los Angeles Department of Water and Power is seeking bids for the procurement of digital optical interface units under solicitation number 232069. This opportunity is categorized under NAICS code 333314 and will be performed in Los Angeles, California. Interested parties must adhere to all submittal requirements detailed in the bid documentation. Bids must be submitted electronically through the Electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. The solicitation was posted on September 30, 2026, and the deadline for responses is October 30, 2026, at 9:00 PM. Eric P. Lau serves as the primary point of contact for this procurement process.

POSTED

DEADLINE

Optical Instruments and Targeting Systems SupplyThis subcontract with HQ USSOCOM involves the supply of advanced optical instruments, lenses, and targeting systems to prime contractors supporting Special Operations Forces. The scope of work includes delivering optical hardware and targeting devices, demonstrating precision sighting systems for end-users, and ensuring all laser-based systems meet regulatory requirements through the completion of FDA Compliance Forms and Laser Information Worksheets. The opportunity is categorized under NAICS code 333314 and is based in Las Vegas, Nevada. Interested parties must respond by January 29, 2027, to support the Department of Defense in providing critical precision optics and targeting capabilities.

POSTED

DEADLINE

OpticsThe Bureau of International Narcotics and Law Enforcement Affairs within the Department of State is seeking optics designed to enhance the capability of law enforcement to identify incoming airborne threats. This requirement is listed as a forecast with a posted date of September 1, 2026, and falls under NAICS code 333314. The place of performance for this contract is located in Kyiv. Interested parties may contact Jamillah Timmons or Small Business Specialist Tyler Sinclair for further information regarding this procurement opportunity.

BUREAU OF INTERNATIONAL NARCOTICS AND LAW ENFORCEMENT AFFAIRS

POSTED

DEADLINE

OpticsThe Department of State has issued a forecast for a contract focused on providing optics designed to enhance the capability of law enforcement to identify incoming airborne threats. This procurement falls under NAICS code 333314 and is intended to improve situational awareness and security through advanced optical technology. The opportunity was posted on August 20, 2026, and is currently listed as a forecast. Interested parties can coordinate with Jamillah Timmons or Small Business Specialist Tyler Sinclair for further information regarding this requirement.

POSTED

DEADLINE

Advanced Materials Testing Hardware DevelopmentThe Advanced Materials Testing Hardware Development subcontract, issued by the NASA SBIR/STTR Program, focuses on the design and fabrication of precision test hardware. The scope of work includes the creation of load frames, grips, and fixtures specifically engineered for the accelerated creep testing of high-strength Vectran webbing. This hardware must be capable of operating under strictly controlled mechanical and thermal conditions to ensure accurate material analysis. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to firms with fewer than 500 employees. The project falls under NAICS code 333314 and will be performed in Hampton, Virginia. Interested parties can find further details through the NASA TechPort portal.

NASA SBIR/STTR Program

POSTED

2 months ago

DEADLINE

N/A

AI Contract Overview

VISN 23 is seeking the procurement and replacement of laparoscopic surgical systems across six VA medical centers located in South Dakota, Iowa, North Dakota, and Nebraska. The project involves a total of 21 systems distributed among the Black Hills, Central Iowa, Fargo, Iowa City, Nebraska Western Iowa, and Sioux Falls facilities. While some locations require full setups including monitors and carts, others will utilize existing articulating arms. The required systems must be high-definition and offer universal capability for various procedures, including bronchoscopy, laparoscopy, arthroscopy, urology, ENT, and GI, while maintaining backward compatibility with existing scopes and cameras. The scope of supply includes HD video processors, light sources, insufflation units, various telescopes, and specialized trays. To offset costs, the medical centers are offering trade-ins of existing equipment, which vendors must account for as separate line items in their bids. Additionally, the selected vendor is responsible for providing comprehensive training services, including quarterly in-service training for medical staff, technical training for biomedical engineering and sterile processing personnel, and access to a complimentary 24-hour consultation hotline.

General Info

Agency

N/A

Contract Value

$2,979,590.41

NAICS

333314 - Optical Instrument and Lens Manufacturing

Place of Performance

MN, USA

Set-Aside

NONE

Awardee

OLYMPUS AMERICA, INC.

Award Issued Date

02/08/2013, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 30

Presolicitation

Type ChangedSep 5

Presolicitation → Solicitation

AwardedFeb 8

Contract was awarded

Submission Closed

02/08/2013, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

I. General: Need Statement: VISN 23 needs complete replacement laparoscopic surgical systems at the following medical centers: Facility VA Black Hills Health Care System - Fort Meade 113 Comanche Road Fort Meade, SD 57741 VA Central Iowa Health Care System - Des Moines 3600 30th Street Des Moines, IA 50310-5774 Fargo VA Health Care System 2101 Elm Street Fargo, ND 58102 Iowa City VA Health Care System 601 Highway 6 West Iowa City, IA 52246-2208 VA Nebraska Western Iowa Health Care System - Omaha 4101 Woolworth Avenue Omaha, NE 68105 Sioux Falls VA Health Care System 2501 W. 22nd Street Sioux Falls, SD 57117-5046 II. Scope of Service a. Black Hills VAHCS (Fort Meade) will be replacing 2 existing Laparoscopic Systems and also procuring 1 additional system for a total of 3 Laparoscopic Systems. Monitors and carts should be included with their systems. b. Central Iowa VAHCS (Des Moines) will be replacing 2 existing Laparoscopic Systems and also procuring 2 additional systems for a total of 4 Laparoscopic Systems. No monitors or carts are needed for these systems as they will be placing them on articulating arms in their Operating rooms. c. Fargo VAHCS will be replacing 2 existing Laparoscopic Systems and also procuring 2 additional systems for a total of 4 Laparoscopic Systems. No monitors or carts are needed for these systems as they will be placing them on articulating arms in their Operating rooms. d. Iowa City VAHCS will be replacing 4 existing Laparoscopic Systems and also procuring 2 additional systems for a total of 6 Laparoscopic Systems. No monitors or carts are needed for these systems as they will be placing them on articulating arms in their Operating rooms. e. NWI VAHCS (Omaha) will be procuring 1 additional system for a total of 1 Laparoscopic System. Monitors and carts should be included with their system. f. Sioux Falls VAHCS will be replacing 3 existing Laparoscopic Systems for a total of 3 Laparoscopic Systems. Monitors and carts should be included with their systems. III. Equipment Requirements a. VISN 23 requires complete surgical systems with universal capability to perform bronchoscopy, laparoscopy, arthroscopy, Urology, ENT, GI, and General procedures to ensure flexibility of OR suites. The systems must be backward compatible with prior technology to enable use of currently owned scopes, and cameras that are not being replaced . Processors as well as cameras must be high-definition. b. The Equipment needed includes, but is not limited to the following items: i. HD Video Processors ii. Universal, CF Compatible light sources with autoclavable cables iii. Light guides and cables iv. HD LCD Monitors, both 26" and 15" v. Insufflation Units vi. HD Printers vii. Video Procedure Carts viii. Workstations ix. Rollstands x. Tray sets a. Quarter size arthroscopic tray b. Laparoscopic tray c. Necessary trays, containers, and lids for other equipment xi. Arthroscopic Telescopes a. 0, 30 and 70 degrees b. Autoclavable c. Wide-angle field of view d. 4x160mm and 2.7x160mm working lengths xii. Telescope Sheaths a. For 4x160mm and 2.7x160mm telescopes xiii. Trocar Spikes, blunt a. 4x160mm and 2.7x160mm working lengths xiv. Laparoscopes a. 0, 30, and 45 degrees b. autoclavable c. Full screen, 5.4x300mm working length d. Full screen, HD, 10x310mm working length e. Full screen, 10x460mm working length xv. Bronchoscopes a. 2.8mm diameter, 1.2mm channel b. 60cm working length c. 90 degree field of view, and angulation of 180degree/130 degree (up/down) xvi. Tracheal Intubation Fiberscope xvii. Camera Heads a. E type and Q type b. Autoclavable c. High definition d. 1.2x, eye piece type IV. Trade In of Equipment a. In order to offset the cost of this procurement each Medical Center is offering to trade in various items from their existing equipment that are being replaced by this new equipment. b. The list of items for trade in is contained on a separate document. c. Vendors should include cost reduction due to equipment traded as separate line items on their bid. V. Required Training Services a. The Vendor shall provide all labor, including travel, per diem, materials, non-consumable supplies, transportation, equipment, consultation and every other item of expense necessary to provide training services for all participating VA Medical Centers on the new laparoscopic surgical systems and equipment. b. The Vendor will provide the medical staff at all participating VA Medical Centers with In-Service Training on a quarterly basis. The Vendor will provide a yearly schedule for the accomplishment of quarterly In-Service Training. The Vendor agrees to provide training manuals and/or online training documentation to be used as a reference. c. The Vendor will also provide access to a 24 hour hotline phone consultation at no charge to VA Medical Centers in addition to the initial training and written manuals and/or online training documentation. d. The Vendor will provide training for Biomedical Engineering staff and Sterile Processing Staff, as well as provide detailed, technical manuals.