Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

SOURCES SOUGHT - PISTOL LIGHT/LASER MODULE (PLM)

Active
N0016413SNB08Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Surface Warfare Center (NSWC) Crane Division is conducting a market survey to gather industry information on pistol-mounted light and laser modules, accessories, and holsters intended for Special Operations Forces pistols such as the M9 series, M1911A1, Glock models, and future pistols with integral accessory rails. Known as the Pistol Light/Laser Module (PLM) effort, this initiative seeks commercial product literature, technical documentation, and pricing details to aid in defining requirements for two separate modules: a grip or frame-mounted laser and a MIL-STD-1913 rail-mounted light. Key performance parameters include visible and infrared capabilities for the light, adjustable visible and near-infrared pointers for the laser, one-hour continuous battery operation for both, and remote activation features. Products must also meet physical constraints such as not extending in front of the pistol muzzle for the light module. Submissions are encouraged from a broad range of entities, including commercial firms, non-profits, universities, and consortia, with a focus on detailed technical descriptions, test data, beam and spectral characteristics, and rough cost estimates. White papers up to 10 pages, including an executive summary, risk identification, schedule, technology readiness level, and cost estimates, should be submitted electronically by the specified deadline, with late submissions accepted without guarantee of evaluation. Recognizing small and disadvantaged businesses, the solicitation stresses the importance of identifying business size and classification. There is no current funding associated with this announcement, and it does not constitute a formal solicitation or commitment to contract. All respondents must be registered in the government’s System for Award Management, and inquiries regarding technical matters and white paper submission are directed to a designated program contact, separate from the contracting officer.

General Info

NSWC Crane seeks industry info on pistol-mounted light/laser modules for Special Operations Forces.

NAICS

333314 - Optical Instrument and Lens Manufacturing

Place of Performance

IN

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
ContactsNo contacts available
OfficeCRANE, IN, 47522-5001, USA
Office AddressCRANE, IN, 47522-5001, USA
ContactsNo contact information available

Full Description

Show more
This solicitation is being posted to both the Federal Business Opportunities (FBO) page located at http://www.fbo.gov/ and the Navy Electronic Commerce on Line (NECO) site located at https://www.neco.navy.mil/ While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by NSWC Crane. MARKET SURVEY - SOURCES SOUGHT SYNOPSIS: The Government is issuing this sources-sought announcement as part of a market survey. Naval Surface Warfare Center (NSWC), Crane Division is seeking information from industry pertaining to pistol mounted Light and Laser Modules, accessories, and accompanying holsters for pistols employed by Special Operations Forces (SOF), including but not limited to the M9, M9A1, M11, MK24, MK25, M1911A1, M45A1, Glock 19, Glock 23, and any future pistol with an integral accessory rail. This effort is named Pistol Light/Laser Module (PLM) until such time as the Government may assign formal nomenclature. The PLM effort is underway to gauge potential interest and assist in requirement development. The USSOCOM Visual Augmentation System Weapons Accessories (VASWA) / Special Operations Peculiar Modification Kit (SOPMOD) Program managed at Naval Surface Warfare Center, Crane Division (NSWC Crane) is interested in receiving product information from industry in support of the PLM mission area. This submission may be in the form of commercial product literature, operating instructions, and/or supplemental technical documentation that define the item and associated hardware. Preliminary specifications are listed below. There shall be two separate modules. A grip or frame mounted laser and a MIL-STD-1913 rail mounted light. 1. Preliminary LIGHT requirements:  Visible Light (T); Visible and IR capability (O).  Visible Light shall provide situational awareness at distances out to 25 m (T).  Visible Light should be remotely activated and deactivated (O).  Visible Light should not extend in front of muzzle (on any pistol) (O).  One (1) hour of continuous operation on one set of batteries  Visible Light / weapon interface hardware must be identified, priced separately and included in the contract. 2. Preliminary LASER requirements:  Laser module shall have Visible Laser Pointer and NIR Pointer (T).  Visible laser shall be seen during dusk and significant over-cast day low-light conditions (T).  Laser shall be adjustable to attain boresight alignment (T).  Laser should be remotely activated and deactivated (O).  One (1) hour of continuous operation on one set of batteries  Laser / weapon interface hardware must be identified, priced separately and included in the contract. Potential PLM LIGHT sources shall also provide a description of their products’ beam and spectral characteristics at 25 meters, in both Visible and IR if applicable. Potential sources should also provide any test results on the item if applicable. A technical description of the product, such as physical characteristics, operational features, performance data, photographs, and a rough cost estimate should be included. Submissions may be sent by any government or non-governmental entity including commercial firms, non-profit organizations, and institutions of higher education with degree-granting programs in science and/or engineering (universities), or by consortia comprising such concerns. All interested parties are strongly encouraged to submit an initial synopsis (commonly referred to as white paper). This white paper should not exceed 10 pages, with an executive summary (short paragraph) on the effort, a technical description of the effort, a preliminary schedule, identification of risks, current Technology Readiness Level (TRL) and a rough cost estimate. Offerors should submit the white papers electronically prior to 3:00 p.m. on March 5, 2013. Submittals after this date will still be accepted, although there is no guarantee they will be evaluated. Responses from Small and Small Disadvantaged Business firms are highly encouraged. Firms responding should indicate if they are a small business, a socially and economically disadvantaged business, 8(a) firms, historically black colleges or universities, and minority institutions. Responses to the RFI shall include the following: Submitter's Name Street Address, City, State, NINE-Digit zip code Point of Contact (POC) POC Telephone and facsimile numbers Announcement Number: N00164-13-S-NB04 It should be noted that the Government plans to utilize employees from Science Applications International Corporation (SAIC), TriStar Engineering (TSE), Booz Allen Hamilton (BAH) and possibly other direct Government contractors as advisors to the Government. Contractors must be properly registered in the Government System for Award Management database (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling +1 (555) 000-0000, or via the Internet at www.sam.gov. At the current time, NO FUNDING IS AVAILABLE for contractual efforts. This sources sought synopsis does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the government to issue a formal solicitation or ultimately award a contract. The US Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed. White papers may be submitted any time prior to expiration of this announcement. The following e-mail point of contact is provided for information regarding technical programs/technologies of interest within the warfare areas supported by the VASWA/SOPMOD Program and for submission of white papers: Mr. Brandon Clarke, contact@example.gov. The contracting POC is Mr. Scott Miller (e-mail: contact@example.gov). DO NOT send white papers to the contracting POC. Please refer to announcement number N00164-13-S-NB08 in all correspondence and communications.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 336510
New
Federal
N0016426RGW20-PROCUREMENT OF DESIGN AND PRODUCTION OF FLAT RAILCARS-PSC 2220- NAICS 336510
Solicitation # N0016426RGW20
Solicitation N0016426RGW20, issued by the NSWC Crane Warfare Center, is an IDIQ contract for the design, testing, and production of NSWC AIM Flatcars. The project has a contract maximum quantity of nine railcars, which must be fully commissioned and approved for rail use by the Association of American Railroads (AAR) in accordance with AAR-M1001 Section C, Part II. Key technical specifications include a lightweight car requirement of 116,000 pounds, truck axle loads not exceeding 60,000 pounds per axle, and adherence to WS20972 and MIL-SPC-810 for load securement. The period of performance is structured over five years from the date of award, with delivery costs to be evaluated across three Strategic Weapons Facility locations. The procurement process has undergone seven amendments, resulting in several extensions of the proposal deadline, with the final closing date set for November 25, 2026, at 2:00 PM EST. Significant modifications include updates to the Statement of Work, a reduction in the number of Contract Data Requirement Lists (CDRLs), and revisions to the System Requirements Document to adjust shipping weights and strikedown loads. The government will evaluate proposals based on delivery pricing and past performance on related railcar design and manufacture contracts, including commercial and non-federal experience. Government Furnished Property, including Active Inert Missiles and shipping fixtures, is designated for support with delivery dates targeted for September 20, 2027.
Railroad Rolling Stock Manufacturing

POSTED

3 days ago

DEADLINE

in 27 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS