Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

65--Primus Steam Sterilizers

Active
36C24E19Q0084Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Regional Procurement Office (RPO) East plans to negotiate exclusively with Primus Sterilizer Company, LLC to acquire two small steam sterilizers for the Research Laboratory at the Omaha VA Medical Center. These new sterilizers will replace aging units beyond their life expectancy. The two models being procured are a 20x20x38-inch steam sterilizer (PSS5-A-MSSD) and a 16x16x26-inch steam sterilizer (PSS5-AA-MSSD), both featuring PSS500 Microcomputer Control with printer functionality and multiple sterilization cycles including vacuum, gravity, liquid, and leak test cycles. The sterilizers must be free-standing, physically compatible with existing laboratory space, operate on 50 psi steam and house water, and connect to single phase 120V power using a 5-20P NEMA plug. Additional technical requirements include specific chamber surface finish specifications and upgradeability for water-saving technology. The vendor is responsible not only for delivering the sterilizers but also for removing and disposing of the old equipment, installation, startup, and user training. Purchase includes operators’ and maintenance manuals. Warranty coverage must be a minimum of one year for the entire unit and at least ten years for the chamber. Contractor support must include a fully trained local field service representative capable of servicing the original equipment. Although this is a sole source intent, other capable vendors may express interest by notifying the Contracting Specialist before the specified deadline, after which the procurement method will be determined.

General Info

Primus Sterilizer sole source for two advanced steam sterilizers with delivery, installation, warranty, training.

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → Rpo East (36C24E)
ContactsNo contacts available
OfficePITTSBURGH, PA, 15212, USA
Office AddressPITTSBURGH, PA, 15212, USA
ContactsNo contact information available

Full Description

Show more
Regional Procurement Office (RPO) - East intends to negotiate on a sole source basis with Primus Sterilizer Company, LLC, 8719 S. 135th Street, Suite 300 - Omaha, Nebraska, 68138, to purchase two small steam sterilizers for the Research Laboratory located at the Omaha VA Medical Center. The specific equipment will replace two older sterilizers that are past their life expectancy. The following equipment will be purchased: ITEM INFORMATION ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT 0001 PSS5-A-MSSD 20x20x38-inch Steam Sterilizer to include: PSS500 Microcomputer Control & Printer with standard vacuum, gravity, liquid and test cycles. 316L Stainless steel chamber with standard PriMirrorr interior surface. STOCK NUMBER: PSS5-A-MSSD 1.00 EA 0002 PSS5-AA-MSSD 16x16x26-inch Steam Sterilizer to include: PSS500 Microcomputer Control & Printer with standard vacuum, gravity, liquid and test cycles. 316L Stainless steel chamber with standard PriMirrorr interior surface. STOCK NUMBER: PSS5-AA-MSSD 1.00 EA Product Capabilities & Salient Characteristics Sterilizers must: Run standard vacuum, gravity, liquid and test cycles (leak test cycle) Be free-standing and fit into the space occupied by the current units without the need for infrastructure changes Have the following dimensions: The 16x16x26 in. chamber unit and 20x20x38 chamber unit should have a depth and width no more than 34X30in and 47x36in respectively. Maximum height for both units can be no more than 74 inches to fit under current canopy hoods. Must run on 50 psi house steam and house water Electrical requirements: Units must connect to single phase 120V power using a 5-20P NEMA configuration. No floor drains are available, so the units must drain to vertical drain lines. The chamber finish must be <10 Micro Inches Ra. This result is a non-porous surface, which is easy to clean and adverse to microorganism growth. For future needs it must be upgradeable to use water saving technologies which can save 90% of water usage. This technology must use single phase 120V electrical power. Vendor must: Remove and dispose of older units. Install, set in place, start up and train users on new sterilizers Operators and maintenance manual must be included with purchase Warranty should be at least one year on entire unit and 10 years or more on the chamber. Contractor must have fully trained local field service representative that are able to service Original Equipment Manufacturer (OEM) equipment. This notice of intent is not a request for competitive proposals. Any responsible sources who wish to identify their interest and capability to provide this equipment or equipment that is compatible must notify this Contracting Specialist at contact@example.gov, NLT Wednesday, June 5, 2019, 12:00 PM (noon), EST. Telephone responses will not be accepted. Upon receipt of the interested parties' notification, the Contracting Officer will determine whether to conduct a competitive procurement or proceed with sole source negotiations.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Veterans Affairs → Rpo East (36C24E)

Same awarding agency

NAICS: 541714
Federal
AJ12--Development/Production - Kidney GEC-Specific AAV Vector
Solicitation # 36C24E27Q0009
The Department of Veterans Affairs is issuing a Sources Sought notice to identify capable vendors for the development and production of a kidney glomerular endothelial cell specific adeno-associated virus AAV vector. This project, funded by a VA ORD Merit award, aims to create a homing peptide enabled vector platform to target the glomerular endothelium to treat kidney injury and disease while reducing off target transduction. The scope of work is divided into three primary tasks: the engineering and incorporation of targeting peptides into the AAV capsid, testing vector binding and internalization in kidney tissue slices, and evaluating the specificity and efficiency of the modified vector through bioluminescence imaging and in vivo biodistribution studies. Qualified contractors must possess extensive onsite resources, including BSL 2 laboratories, specialized DNA and RNA facilities, and advanced instrumentation such as the Agilent Fragment Analyzer and various qPCR platforms. Vendors must demonstrate proven success in animal and human cell vector delivery and maintain full compliance with AAALAC and FELASA health standards. The government requires quarterly reporting, weekly videoconferences, and biannual face to face meetings. All generated data will be subject to Government Purpose Rights, and contractors must adhere to strict federal records management and information security protocols. Interested parties must submit a capability statement, relevant literature, and socio economic status details under NAICS 541714 by November 4, 2026.
Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 339113
Federal
6636--Research Equip (LAMb) - Automatic Bedding Dispensers - LA | EDA: 9/25/26
Solicitation # 36C24E26Q0071
The Department of Veterans Affairs is seeking market information for an automated Animal Bedding Dispenser to support laboratory animal care operations at the VA Greater Los Angeles Healthcare System in North Hills, California. The equipment must deliver bedding to mouse and rat cages with a throughput capacity of up to 750 cages per hour, featuring dual dispensing modes for single and double cages, adjustable volume control, and compatibility with various cage sizes and bedding types. The system must be constructed with a 304 stainless steel interior and powder-coated steel exterior, incorporate H13 HEPA filtration with airflow between 120–160 cfm, maintain noise levels not exceeding 65 dBA, and include motion sensors and jam prevention features. Technical compliance requires certifications including CE, UKCA, and ETL, and the product must align with NAICS code 339113 and PSC 6636. Delivery is required at the specified location under a white glove service model, encompassing uncrating, installation, startup, and removal of packaging materials. The estimated delivery date is September 25, 2026, though this is not a binding contract date as the current document is a presolicitation sources sought notice for gathering industry feedback. The contracting office is the Veterans Health Administration Regional Procurement Office East in Pittsburgh, Pennsylvania, with JD Cooley as the primary point of contact. While no formal pricing, CLIN structure, or contract value is provided, the government is evaluating potential set-asides for small businesses, including HUBZone, 8(a), SDB, WOSB, SDVOSB, and VOSB concerns, and seeks capability statements limited to two pages to assess vendor qualifications. Domestic manufacturing preference is expressed, and submissions must be delivered electronically to the provided email address, with future formal solicitations expected to be posted via SAM.gov.
Surgical Appliance and Supplies Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS