This Government Contract opportunity from Department Of Veterans Affairs was posted on October 2, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

6515--PO# 460A00039 |460-20-4-3019-1130 | Ultrasound Transducer Status/Issues: Awarded 9/3/20 wam

Awarded

36C24420Q1004Federal

Submission Closed09/03/2020, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334510

New

Federal

PINPOINT SIGMA SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete PINPOINT SIGMA SYS for prime contractors supporting DLA Mechanicsburg. The selected provider is responsible for procuring or manufacturing integrated hardware, software, and firmware in strict accordance with technical requirements, while maintaining the total equipment baseline configuration and conducting plant quality assurance. The final deliverable consists of one fully inspected and packaged unit. Compliance is a critical component of this effort, requiring the contractor to hold CMMC Level 1 certification. Additionally, all work must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The opportunity falls under NAICS code 334510 and is managed by the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

FAULTFINDER ETS SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete FAULTFINDER ETS SYS for prime contractors supporting DLA Mechanicsburg. The scope of work includes the procurement or manufacture of integrated hardware, software, and firmware in strict accordance with technical requirements. The contractor is responsible for maintaining the total equipment baseline configuration and conducting comprehensive plant quality assurance to ensure the delivery of one fully inspected and packaged unit. Compliance is a critical component of this contract, requiring the provider to maintain CMMC Level 1 certification. Additionally, all deliverables must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The project falls under NAICS code 334510 and is managed through the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Ultrasound Diagnostic System, Hand Carried (USHC) - Prototype

Solicitation # W91CRB-RPP-USHC

The U.S. Army, through the Portfolio Acquisition Executive Maneuver Ground and Project Manager Maneuver Medical Devices, is soliciting prototype proposals for a hand-carried Ultrasound Diagnostic System (USHC). This effort is structured as a Direct Other Transaction Agreement under 10 U.S.C. 4022, meaning it is not a FAR-based contract. The government seeks a Commercial-Off-The-Shelf or Non-Developmental Item capable of supporting medical operations in austere Role of Care 3 environments, specifically for FAST exams, ultrasound-guided procedures, and ruling out deep vein thrombosis. Selected vendors must deliver two prototype units for operational and environmental testing in accordance with MIL-STD-810H. The system must be FDA cleared for human use, Trade Agreements Act compliant, and capable of operating on both CONUS and OCONUS power infrastructures. The estimated period of performance is twelve months, with prototype delivery expected 45 to 60 days after award. Evaluation is based on a comparative best-value methodology, prioritizing technical approach, performance compliance, reliability, schedule realism, and past performance over cost. Key requirements include MIL-STD-130N compliant IUID marking, NIST SP 800-171 cybersecurity compliance, and a minimum one-year warranty. Proposals must be submitted via DoD SAFE or secure email by November 6, 2026, and must adhere to strict page limits across four specific volumes. Notably, participants in this prototype agreement may be eligible for a noncompetitive follow-on production contract.

POSTED

DEADLINE

Specialized Medical Component FabricationThis subcontract for Specialized Medical Component Fabrication involves the production of precision components for medical devices focused on trauma care and fracture stabilization. Working under prime contractors for BARDA projects within the Department of Health and Human Services, the selected provider will utilize precision CNC machining and molding to fabricate hardware from biocompatible polymers and medical-grade alloys. The contract requires strict adherence to FDA regulatory compliance and ISO 13485 certification to ensure the quality of the finished medical device components. Performance will take place in Washington, with a response deadline set for November 18, 2026.

Barda - Aspr / Daappo / Barda Dcma

POSTED

DEADLINE

Automated Ultrasound-Based, Super Intelligence (SI)-Enabled Fracture Detection

Solicitation # BARDA-FY27-10192026

The Center for Biomedical Advanced Research and Development Authority (BARDA) has issued Sources Sought Notice BARDA-FY27-10192026 to identify innovative medical countermeasure technologies for the rapid triage of musculoskeletal injuries, such as fractures and soft tissue injuries of extremities. This request for information is intended for planning and market research purposes to assess commercially available or nearing-commercial technologies that utilize Super Intelligence (SI) and machine learning for automated ultrasound-based fracture detection. The goal is to find standalone, point-of-care devices that can operate in emergency departments, urgent care centers, and austere field settings without relying on traditional imaging infrastructure like X-ray or CT scans. The desired technology must feature automated volumetric capture, 3D-rotatable modeling, and SI-enabled image processing that outperforms human imaging experts and has undergone FDA 510k clearance processes. BARDA is interested in ruggedized, portable units with sufficient battery life for disaster response, interoperability with electronic health record systems, and minimal training requirements for non-specialist operators. Potential acquisition strategies being explored include direct purchases, leases, or vendor-managed inventory arrangements. Interested small businesses and other than small business concerns under NAICS code 334510 must submit their capabilities statements by 1:00 p.m. Eastern Time on November 18, 2026. Submissions must include separate Technical and Business Representation sections, each limited to 10 pages in 12-point Times New Roman font, and be emailed to Justin Moore and Richard Hall. Responses should detail the company's manufacturing capabilities within the United States, regulatory maturity, supply chain resilience, and cybersecurity standards for handling sensitive patient health information.

Barda - Aspr / Daappo / Barda Dcma

POSTED

DEADLINE

Supplier of Digital Levels and Survey AccessoriesThis subcontract agreement establishes a supplier for digital levels and non-core survey accessories to support prime contractors working on projects for the California Department of General Services and Caltrans. The scope of work includes the delivery of digital leveling equipment and a variety of catalog-based accessories, such as poles, prisms, and tripods, all of which must adhere to general land surveying industry standards. Managed under the DGS Statewide Procurement agency, the contract falls under NAICS code 334510. The solicitation was posted on October 20, 2026, with a response deadline set for November 2, 2026.

DGS - Statewide Procurement

POSTED

DEADLINE

Supplier of Robotic Total Stations and Spatial StationsThis subcontract agreement establishes a supplier for high-precision robotic total stations and spatial stations to support prime contractors working on California Department of General Services and Caltrans projects. The contract requires the delivery of new, latest-model equipment, specifically robotic total stations featuring reflectorless capabilities exceeding 50 meters and single prism capabilities exceeding 800 meters. Additionally, spatial stations must provide scan rates of 25,000 points per second and maintain an angular accuracy of 3 arcseconds. All provided equipment must strictly adhere to IEC 60825-1 and ANSI Z136.1 laser safety standards. Managed under the DGS Statewide Procurement agency with NAICS code 334510, the solicitation was posted on October 20, 2026, with a response deadline of November 2, 2026.

DGS - Statewide Procurement

POSTED

DEADLINE

Digital Tomosynthesis Veterinary X-Ray System SupplierThis subcontract involves the supply of a complete portable digital tomosynthesis-capable X-ray system for prime contractors working on City of Norfolk veterinary projects for the Zoo. The required equipment includes a portable X-ray generator, tube, a digital radiographic detector with a minimum size of 6x6 inches, a tomosynthesis workstation, necessary software, and mobile carts. To ensure seamless integration and accessibility, the system must be fully DICOM compatible, PACS-ready for storage, and the software must adhere to WCAG compliance standards. The successful supplier will deliver one fully functional imaging system backed by a one-year manufacturer warranty. This procurement falls under NAICS code 334510, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Public Safety and Emergency Services - Request for Quotes - CSD Biometrics Scanner

Solicitation # AB-2026-06949

Public Safety and Emergency Services is seeking quotes for the procurement of an in-cell biometric and contactless health-monitoring sensor system. This technology will be implemented at the Edmonton and Calgary Remand Centres to track critical vital signs, specifically heart rate and respiration, for individuals in custody. The solicitation, identified as AB-2026-06949, was posted on October 19, 2026, with a response deadline of November 2, 2026. The project will be performed within Alberta, and interested parties should coordinate with the primary procurement officer, Paul Dinh, for further inquiries.

Public Safety and Emergency Services

POSTED

DEADLINE

Defibrillator Electrode Pad SupplierThis subcontract opportunity is for a supplier to provide defibrillator electrode pads to prime contractors supporting Department of Defense contracts through the Medical Supply Chain MD Surg FSF. The selected provider must manufacture or source electrode pads that strictly adhere to NSN 6515-01-613-1594 specifications. The scope of work includes comprehensive commercial packaging and packing to ensure each unit is sealed in a suitable container for protection, meeting all DLA packaging requirements for medical acquisitions. Interested parties must respond by October 26, 2026, for this requirement categorized under NAICS code 334510.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Battery Test Set ManufacturingThis subcontract involves the manufacture and supply of 16 complete Battery Test Sets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the assembly, integration, and quality assurance testing of the units to ensure they meet the strict specifications required for NSN 6625-01-737-4917, utilizing specialized electronics assembly equipment and calibration tools. The project falls under NAICS code 334510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this procurement effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

ADAPTER, AIRWAY, CAPNOME

Solicitation # SPE2DS-27-T-0778

Solicitation SPE2DS-27-T-0778 is issued by the Department of Defense Medical Supply Chain for the procurement of one box of hand-held capnometer airway adapters, NSN 6515-01-623-0942. These disposable, non-sterile, white plastic adapters are designed for adult and pediatric use and must have a maximum dead-space of 6.0 ml. Each box contains 25 units. The items are subject to a non-extendable shelf life of 60 months, with a requirement that no more than 9 months have elapsed from the date of manufacture to the date of delivery to the government. The contract specifies delivery within 20 days after receipt of order to the Commanding Officer Station Sar Lemoore in California, with FOB, inspection, and acceptance all set to destination. Packaging must comply with ASTM D3951 and DLA requirement RP001, while labeling must adhere to MIL-STD-129 and the latest MMS1A revision, including the manufacturer date, expiration or retest date, and contract/lot number. Bidders must specify the source and part number being supplied. The award is governed by NAICS code 334510 and incorporates various FAR and DFARS clauses, including the HUBZone price evaluation preference and strict cybersecurity reporting requirements under DFARS 252.204-7012.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days

AI Contract Overview

The Department of Veterans Affairs Network Contracting Office 4 awarded contract 36C24420P0848 to SpecOps Medical Supply LLC on September 3, 2020, for a total amount of 67,480.39 dollars. This SDVOSB set-aside acquisition provides the Wilmington VA Medical Center in Delaware with one Fujifilm SonoSite X-Porte Ultrasound Kiosk System. This brand-name requirement was selected for its specific integrated technology and preinstalled education programs, featuring a high-resolution all-digital kiosk with a capacitive multi-touch interface, an adjustable LED monitor, and advanced imaging capabilities including XDI Extreme Definition Imaging and SonoHd2 technology. The system includes a comprehensive hardware package with a triple transducer connection, battery pack, and storage basket, designed to withstand specific drop-test durability standards. The agreement stipulates a five-year standard warranty on the system and various transducers, with a one-year warranty on the battery and accessories. Delivery and installation by a SonoSite Clinical Specialist are required within 45 days of the order, which includes a product overview and the removal of one existing SonoSite ultrasound unit.

General Info

Agency

Department Of Veterans Affairs → 244-NETWORK Contract Office 4 (36C244)

Contract Value

$67,480.39

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

PA, USA

Set-Aside

SDVOSBC

Awardee

SPECOPS MEDICAL SUPPLY, LLC

Award Issued Date

09/01/2020, 12:00:00 AM UTC

Documents

Award Notice 36C24420P0848 - Ultrasound Transducer

award

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedAug 21

Presolicitation

Type ChangedAug 24

Presolicitation → Solicitation

AwardedSep 1

Contract was awarded

Submission Closed

09/03/2020, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 244-NETWORK Contract Office 4 (36C244)

Contacts1 person available

OfficePITTSBURGH, PA, 15215, USA

Organization / AgencyDepartment Of Veterans Affairs → 244-NETWORK Contract Office 4 (36C244)

Office AddressPITTSBURGH, PA, 15215, USA

Contacts

Walida MooreContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

STATEMENT OF NEED 1.0 GENERAL SCOPE The Wilmington VA Medical Center has a requirement for one (1) Fujifilm SonoSite X-Porte Ultrasound System. SonoSite is the only brand for this acquisition capable of providing the necessary technology and preinstalled education programs in one package. The equipment shall be delivered to the following location: 1601 Kirkwood Hwy, Wilmington, DE 19805 This requirement includes the X-Porte Ultrasound Kiosk System with Stand, accessories, and warranty. 2.0 PRODUCT: DESCRIPTION AND QUANTITIES The SonoSite X-Porte is a high resolution, all digital ultrasound kiosk designed to meet the needs of the demanding clinical environment. The X-Porte Kiosk includes a capacitive multi-ouch panel user interface, adjustable high-resolution LED monitor for image display and review, a system stand featuring a triple transducer connection, battery pack and a storage basket. High resolution imagining including imagining modes (M-Mode, Pulsed Wave Doppler Update and Simultaneous, continuous wave doppler, color power doppler, and tissue doppler imagining. The X-Porte kiosk features proprietary software technologies: XDI Extreme Definition Imaging, Steep Needle Profiling, SonoHd2 Imaging Technology, SonoMB Multibeam Technology, SonoADAPTTM Tissue Optimization Technology, Pulse Inversion Tissue Harmonic Imaging, Color HDTM Technology, Autogain. Quantity = One (1) 3.0 SALIENT CHARACTERISTICS TECHNICAL REQUIREMENT OF PRODUCTS. This is a Brand Name equipment requirement. See the following for system specifications: Dynamic Range: Up to 183 dB Stand Dimensions: 26.4 L x 21.2 W Stand Height (max): 65 (monitor up) Stand Height (min): 42.2 (monitor down) Height Adjustment: 9 travel 12.1 Capacitive Touch Screen Multi-touch gestures for system controls Control Panel Tilt Adjustment: 0 degrees to 110 degrees Side to side turning: +/- 90 degrees from center Monitor Tilt: 85 110 degrees (5 degrees tilting forward from vertical, 20 degrees tilting back from vertical) Casters: 5 Swivel, 4 Locking System Boot up: < 25 secs from power-on to scanning HD Monitor: 19 Diagonally (minimum) Image Size: 800 x 600 Control Panel Resolution: 1280 x 800 Screen Resolution (minimum): 1680 x 1050 (16:10) Architecture: All digital broadband Gray Scale: 256 Shades HIPAA Compliance: Comprehensive tool set The engine shall withstand a drop from a height of 6 inches on to a 50mm hardwood board lying flat on a concrete base. UP to three times by normal use. The system shall be safe and function normally after these drops. Clinical display brightness is 300 cd/m2 4.0 WARRANTY & SERVICE Five-year standard warranty on the system Five-year standard warranty on rP19xp, C60xp, ICTxp, L38xp, L25xp, HFL50xp, HFL38xp, HSL25xp, C35xp, P10xp, and C11x transducers. One-year standard warranty on battery and accessories carrying the manufacturer s label excluding the system. Provide a replacement engine within 24hrs where available (24 hr. shipping not available in all geographical locations) 5.0 DELIVERY & INSTALL FOB Destination All furniture shall be delivered within 45 days after receipt of order. Products shall be packaged to prevent damage or deterioration during shipment, handling, storage and installation. Installation provided by a SonoSite Clinical Specialist. The installation includes an overview of the product and accessories purchased, including the features, functions, user interface, and system care/maintenance. Contractor will remove one (1) SonoSite Ultrasound equipment.