6515--CASE V7

THIS REQUEST FOR INFORMATION (RFI) SOURCES SOUGHT IS ISSUED SOLELY FOR MARKET RESEARCH AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION 1. Responses to this Sources Sought must be in writing. The purpose of this Sources Sought Announcement is for market research only to make appropriate acquisition decisions and to gain knowledge of Small Businesses, including Service-Disabled Veteran-Owned Small Businesses and Veteran-Owned Small Businesses (SDVOSB/VOSB), who are interested in submitting proposals for this procurement and who are capable of performing the work required for this procurement. 2. The NAICS for this requirement is 339112 Surgical and Medical Instrument Manufacturing 3. The Contractor shall supply, install, configure, and validate a casev6.7 product and provide on-going technical support and maintenance services for that installed product for the Tibor Rubin VA Medical Center located in Long Beach, California. The required supply item (casev6.7 product) must take in data from multiple VA legacy systems, including Veterans Health Information Systems and Technology Architecture (VistA)/Computerized Patient Record System (CPRS), to provide ongoing surveillance and real-time alerts of clinical activity to VA clinical staff. The required services (installation, configuration, validation, support, and maintenance for casev6.7) shall be provided by the contractor along with all resources necessary to accomplish the deliveries. 4. Interested and capable Contractors are encouraged to respond to this notice not later than Tuesday, February 3rd, 2026 at 03:00 PM PST, by providing the following information via email only to •••••@•••••.•••Sign up to see this detail.
(a) Company name (b) Address (c) Point of contact (d) Phone, fax, and email of primary point of contact (e) Contractor s Unique Entity ID (SAM) number (f) Type of small business, if applicable, (e.g. Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), 8(a), HUB-Zone, Woman Owned Small Business, Small Disadvantaged Business, or Small Business). (g) Statement indicating whether your company is considered small under the size standard for the NAICS code identified under this RFI. (h) Statement indicating the product name of the casev6.7 product referenced above that you intend to provide for this procurement. (i) Statement indicating whether you are the manufacturer of the casev6.7 product that you intend to provide for this procurement. If you intend to provide product manufactured by a company other than your own, state the name of the company whose casev6.7 product you intend to provide, the country of origin for the product you intend to provide, and whether the company that manufactures that product is a small business under the size standard for the NAICS code identified under this RFI. (j) Statement indicating if you have a current contract to provide the casev6.7 product that you intend to provide for this procurement, along with the installation, configuration, validation, support, and maintenance services required by this procurement, under either the General Services Administration s Federal Supply Schedule or with NAC, NASA SEWP, or any other federal contract. If yes, provide the contract type and contract number, as well as the identity of the federal agency with whom you hold that contract. (k) Statement indicating how many calendar days you estimate it would take you to install, configure, and validate the product that you intend to provide for this procurement in a medical center similar to the Tibor Rubin VA Medical Center. (l) General pricing for your products/solutions for market research purposes. (m) A capability statement that provides detailed information for one or more reference contracts that demonstrate your experience providing casev6.7 that meets the requirements described in the attached DRAFT Statement of Work and demonstrates your experience providing the installation, configuration, validation, support, and maintenance services required by this procurement. GENERAL STATEMENTS OF CAPABILITY ARE NOT ACCEPTABLE. Respondents must provide the following information for each reference contract the respondent identifies as evidence of the respondent s capability to perform the work required by this procurement. Respondents must provide the following information for each reference contract: (1) the legal name of entity with whom the respondent held the contract; (2) the contract number; (3) a description providing details of the specific tasks the respondent performed under that contract; (4) the dates during which the respondent performed the contract; (5) the name, phone number, and email address of a person at the entity with whom the respondent held the contract who can verify the information the respondent provides regarding this reference contract. If a respondent offers to demonstrate experience through the proposed use of subcontractors, the respondent must identify the legal name of each subcontractor and provide all of the information required above for one or more reference contracts performed by each subcontractor the respondent intends to use. NOTE: The information requested above is required for the Government to evaluate whether there are sufficient small business concerns of a particular type who are capable of performing the work required by this procurement to determine if this procurement should be set aside for a given type of small business concern. FAILURE TO SUBMIT ALL OF THE INFORMATION REQUESTED ABOVE MAY BE VIEWED BY THE GOVERNMENT AS EVIDENCE THAT THE RESPONDENT LACKS THE ABILITY TO PROVIDE THE CASEV6.7 AND SERVICES REQUIRED BY THIS PROCUREMENT. THIS, IN TURN, MAY AFFECT THE GOVERNMENT S DETERMINATION ABOUT WHETHER THE REQUIREMENTS FOR A SET-ASIDE PROCUREMENT HAVE BEEN MET. 5. All Offerors who provide goods or services to the United States Government must be registered in the System for Award Management (SAM) database found at https://www.sam.gov. Registration must include Representations and Certifications. --End of Sources Sought Announcement--
DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.
SCHEDULE OF SUPPLIES:
SALIENT CHARACTERISTICS: Must be Windows 10 compliant Must have Signal processing Must have ECG analysis frequency 500 Hz Must have ST measurements ST amplitudes, slope, integral, index, ST/HR hysteresis, ST/HR slope, ST/HR loops, ST/HR Must have index up to 15 leads Must have E, J and post-J point Manual or computer selected Must have Signal processing Incremental median updating technique Must have Baseline correction Finite Residual Filter (FRF) and/or Cubic Spline analysis Must have QRS detection and analysis Automatic or manual lead selection Must have ECG output Real-time ECG/QRS beep/TTL synchronization output Must have Heart rate Automatic arrhythmia detection, documentation and annotation Must have Full-disclosure ECG Beat-to-beat ECG storage & event review Must have Reanalysis Post-test medians measurements from E, J and post-J point selections Must have ECG interpretation (Optional) Marquette 12SL resting ECG analysis program for adults and pediatrics Must have Additional ECG function XTI stress interpretation Must have Vectorcardiography (15 lead) Must have Data acquisition Must have Technology Active, Type BF floating isolated powered 14-channel acquisition module with built-in Must have lead-fail detection and lead prep impedance measurement Must have Sampling rate Over-sampling @ 16000 Hz, 12 leads Must have Skew 62.5 µs Must have Dynamic range 320 mV, ± 10 mV signal superimposed on ± 150 mV DC offset Must have Resolution 4.88 µV/LSB @ 500 Hz Must have Noise < 15 µV peak-to-peak noise over 0.01 to 150 Hz (-3 dB) bandwidth Must have Frequency response -3 dB, display and writer Must have High-pass filter 0.01 (or 0.05 Hz, special use) with DC offset control Must have Low-pass filter 20, 40, 100, 150 Hz (selectable) Must have Line filter 50.0 or 60.0 Hz notch filter (selectable) Must have Artifact/baseline correction Finite Residual Filter (FRF) or Cubic Spline algorithms Must have Common mode rejection > 140 dB (123 dB with AC filter disabled) Must have Input impedance > 10 M Ohms @ 10 Hz, defibrillator protected Must have Patient leakage < 10 µA Must have Pace detect Orthogonal LA, LL and V6; 750 µV @ 50