Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 11, 2007. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

66 -- Air Data Test System

Awarded
Reference-Number-F1T0EB7170AG01Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519
New
SLED
RFID Stick Readers
Solicitation # 554-27-003
The Texas Animal Health Commission is soliciting bids under solicitation number 554-27-003 for the procurement of low frequency RFID stick readers for livestock applications. The required equipment must include the RFID stick reader, a rugged padded case, a USB data transfer cable, and a charging cable with an adapter, with the capability to display multiple types of data simultaneously. This is an Invitation for Bids (IFB) process, typically awarding to the lowest responsive and responsible bidder. Bids must be submitted in a sealed envelope to the Purchasing Department in Austin, Texas, by 2:00 p.m. Central Time on December 3, 2026. Electronic or facsimile submissions will be rejected, and failure to properly label the envelope or complete the Information and Certifications Form will result in disqualification. The contract is governed by the laws of the State of Texas and the Texas Government Code. Award is expected in December 2026, with payments processed within 30 days of satisfactory delivery in accordance with the Texas Prompt Payment Act. Vendors must certify compliance with various state and federal regulations, including HUB status, antitrust laws, and cybersecurity training requirements. The Texas Animal Health Commission maintains the authority to monitor performance through document reviews and on-site audits, providing a ten-day window for corrective action if non-compliance is identified. Primary administrative and bidding contact is Bryan Krugman.
Texas Animal Health Commission

POSTED

about 8 hours ago

DEADLINE

in about 1 month

General Info

Contract Value

$34,865

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

FL

Set-Aside

NONE

Awardee

DRUCK, LLC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA2823 Aftc Pzio
Contacts2 people available
OfficeEGLIN AFB, FL, 32542-5418, USA
Office AddressEGLIN AFB, FL, 32542-5418, USA
Contacts
Mary G. GardnerContract Specialist
Michael H. DeNamurContract Specialist

Full Description

Show more
The 96th Contracting Squadron, Eglin AFB, Florida intends to award a Firm-Fixed Price (FFP), for the purchase of 1 each, Air Data Test Set System in support of the 782 Test Squadron (46TW). This is a mission critical requirement and a combined synopsis/solicitation for commercial items prepared in accordance with the format in subparts 12.6 and 13.5, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The announcement number is F1T0DE7170AG01. This solicitation is issued as a Request for Quotation (RFQ). The North American Industry Classification Systems (NAICS) code for this acquisition is 334519, with a small business size standard of 500. Please identify/confirm your business size in your response based upon this standard. Contractors must comply with the Statement of Work (SOW) and Technical Review Document (TRD) attached to the solicitation and meet the following requirements: CLIN 0001: 1 each, Air Data Test Set System - Twin channel PS and Pt pressure control system used for precision calibration/verification of aircraft pilot statistics - Compliant with the latest RVSM (Reduced Vertical Saparation minima) Standards. - Keypad control and ATE/IEEE 488 (minimum IEEE-488 commanded update rate of 5 Hz) - Software Package with serial interface mode adaptor to permit PC based control and program download for resident test routines - Must provide manufacturer-recommended pneumatic supply equipment, also 19 inch Rack mountable. - Enable vital pressure based flight instrumentation including altimeters, airspeed indicators, rate of climb indicators, mach meters and air data computers to be quickly and accurately tested. - 19 inch Rack Mountable - Altitude read and value entry - 1. 3kft to 80kft Range 2. 1 ft Resolution 3. Accuracy within 7 ft at 30ft Alt - Airspeed read and value entry - 1. 10 to 1000 knots within 0.1 kts resolution 2. +/- 0.07 kts at 550 kts 3. +/- 0.2 kts repeatability at 550kts - Static Sensor - 1. 35 to 1355 mbar range with 0.01 mbar resolution - 2. 0.01 FS accuracy - Pitot Sensor - 1. 35 to 3500 mbar range with 0.01 mbar resolution - 2. 0.01 FS accuracy - Mach read and value entry - 1. 0 to 10 range with 0.001 resolution - Engine pressure ratio test (Ps/Pt for inlet/exhaust) - 1. 0.1 to 10 EPR Range with 0.001 Resolution - Rate of Climb, rate of speed entry and timing display - 1. 0 to 100,000 ft/min rate selectable operating range - 2. 1 ft/min resolution - 3. +/-1 percent of value accuracy - 4. +/-0.5 percent repeatability - Select timing for rate of climb testing or leak testing - Freeze control value to ?on state? at current conditions - Rate control for Pt channel - Controlled vent to ground and read QFE/QNH - Shock and vibration shall meet section 8, EN61010 - Standard commercial operations and maintenance manuals are required as applicable. - Delivery is required to Eglin AFB, FL within 10 weeks after award. Final inspection will be at Eglin AFB, FL. CLIN 0002: 1 each, Pressure/Vacuum Supply Unit CLIN 0003: 1 each, Test Program Manager (software accessories for the Air Data Test Set) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-10, FAC 2005-17, Effective 14 June 2007; FAR 52.212-1, Instructions to Offerors-Commercial Items-(Oct 2000), and any addenda to the provision as listed in this notice; 52.212-2, Evaluation-Commercial Items-(Jan 1999), evaluation will be based on the following factor: Lowest Price Technically Acceptable (LPTA); 52.212-3, Offeror Representations and Certifications-Commercial Items-(Jul 2002), Offerors must submit a complete copy with their offers. To obtain an electronic copy of 52.212-3, visit the following website: http://farsite.af.mil, or contact Mike DeNamur at the below email address); 52.212-4, Contract Terms and Conditions-Commercial Items-(Feb 2002), and any addenda to the provision as listed in this notice; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items-(May 2002); 52.232-33, Mandatory Information for Electronic Funds Transfer Payments-(May 1999); 52.247-34, F.O.B. Destination-(Nov 1991); 52.252-2, Clauses Incorporated by Reference-(Feb 1998); DFARS 252.225-7001, Buy American Act and Balance of Payments Program-(Mar 1998); 252.204-7004, Required Central Contractor Registration (CCR)-(Nov 2001); 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders applicable to Defense Acquisitions of Commercial Items-(Jul 2002). To view the provisions and clauses in full text, visit the website: http://farsite.af.mil. Vendors MUST be registered in Central Contractor Registration (www.ccr.gov) before an award can be made. The quote format is at the discretion of the offeror. All responses must be received No Later Than (NLT) 4:00 P.M., Central Standard Time (CST) on 5 July 2007. Send all quotations to Mary Garder (Primary at phone +1 (555) 000-0000) or Mike DeNamur (Alternate at phone +1 (555) 000-0000), 205 West D Avenue, Suite 542, Eglin AFB FL, 32542-6864, or by facsimile to +1 (555) 000-0000, or by email at contact@example.gov or contact@example.gov.

More opportunities from Department Of Defense → FA2823 Aftc Pzio

Same awarding agency

NAICS: 334417
New
Federal
Harsh Environment Circular Connector Accessories
Solicitation # FA282327Q0004
Solicitation FA2823-27-Q-0004 is a request for quote issued by the Air Force Test Center at Eglin Air Force Base for the procurement of 270 Robert Technologies heavy-duty circular electrical connectors, part number RT9730-19-12S-546. These connectors are intended for use in military ground support equipment and industrial machinery, requiring compliance with MIL-DTL-22992 Class L standards and IP67 environmental sealing. A Determination and Findings document justifies this as a single-source procurement because no other manufacturer provides a drop-in replacement that matches the proprietary form, fit, and configuration. The contract will be awarded as a firm-fixed-price purchase order to the lowest priced, responsible offeror that meets all minimum technical requirements. Quotes must be submitted in English and U.S. dollars to Kristina Brannon by 12:00 CST on November 3, 2026. Delivery is required within 26 weeks after the date of award receipt, with shipping terms set as FOB Destination to Eglin AFB, Florida. Offerors must be registered in the System for Award Management and the Wide Area WorkFlow system for payment. The solicitation includes a price evaluation preference for HUBZone small business concerns and requires strict adherence to packaging and marking standards to protect against moisture and physical damage. Quality assurance includes visual examinations, dimensional checks, and potential First Article Inspection requirements.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS