Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INDICATOR, SIGHT, LIQUID

Active
SPE7LX-26-U-9499Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of an Indicator, Sight, Liquid, identified by NSN 6680-21-912-5746 and Part Number 10618078, under solicitation SPE7LX-26-U-9499, with a total quantity of 608 units to be delivered FOB origin within 128 days. The item is classified as a Critical Application Item under the control of General Dynamics Land Systems Canada and is covered under DLA Direct, CONUS. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date, depending on acquisition size. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. Packaging must conform to MIL-STD-2073-1E with specific preservation methods and packaging codes, and marking must follow MIL-STD-129 including the special marking code for delicate instrument. The contract enforces a zero variance in quantity, with inspection and acceptance occurring at destination. The unit of issue is each, and pricing is set at a fixed rate with a total value tied to the quoted quantity. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, under NAICS code 334519, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.

General Info

608 sight indicators ordered by DoD, delivery in 128 days, one approved source, $350K cap, four annual orders.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INDICATOR,SIGHT,LIQUID
INDICATOR,SIGHT,LIQUID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
GENERAL DYNAMICS LAND SYSTEMS CANADA 56161 P/N 10618078
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000239559 0001 EA 608.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:6680219125746
DELIVERY (IN DAYS):0128
DELIVER FOB: ORIGIN
SPE7LX-26-U-9499
SECTION B
PR: 1000239559 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:05 -05 Delicate instrument
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9499 NSN/Part Number: 6680-21-912-5746 Quantity: 608 EA Purchase Request: 1000239559QTY: 608 Delivery: 128 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
Federal
LIPTM00149 - ASE - ASE-26-___ - SSEE Mission Module Test Equipment Hardware (C)The contract pertains to the development and provision of test equipment for the SSEE Mission Module under the U.S. Navy’s Naval Information Warfare Systems command, managed by NIWC Atlantic. The effort is designated under NAICS code 334519, indicating it involves other electronic component manufacturing, specifically focused on hardware required to support testing and validation of mission-critical naval systems. Performance of the work is expected to occur in Charleston, with the contracting officer, Martha Leya, serving as the primary and secondary point of contact for all inquiries and communications regarding the procurement. The solicitation is currently in forecast status, suggesting it is a pre-solicitation announcement to gauge industry interest and prepare for a future formal bidding process. This initiative supports the Navy’s ongoing modernization and readiness goals by ensuring robust, reliable test capabilities for advanced mission modules used in naval operations.
Niwc Atlantic

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 334519
New
Federal
TFDS (Brandywine Follow-on)
Niwc Pacific

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 334519
New
Federal
FuelTrax IDIQ (C)The U.S. Marine Corps is seeking to acquire Fueltrax Portable Measurement Units through an indefinite-delivery, indefinite-quantity contract with a maximum ceiling of $40 million, aimed at enhancing the Fuel Automated Reporting System. The contract will be managed by Naval Information Warfare Systems Pacific under the Marine Corps Systems Command and is intended to support accurate fuel measurement and reporting across operational environments. The ordering period for this contract will span 60 months, providing flexibility to issue task orders as needed to meet evolving requirements. The performance location is designated as San Diego, and the North American Industry Classification System code is 334519, indicating the procurement involves other electronic component manufacturing. Jacob Ward serves as the primary contracting officer with Trinity Anglo as the secondary point of contact, both reachable via official Navy email addresses. The forecast was posted in August 2026, signaling the upcoming solicitation phase and potential vendor engagement to supply the required portable measurement units for Marine Corps fuel operations.
Niwc Pacific

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 334519
New
SLED
Distance Meter
Solicitation # DASIowa-645-RFQ-2967-2027
The Iowa Department of Transportation is seeking proposals for a Distance Meter under solicitation number DASIowa-645-RFQ-2967-2027, which was posted on August 10, 2026, with a response deadline of August 18, 2026. This solicitation is targeted at state, local, and educational government entities and does not specify a set-aside classification or NAICS code. The project involves the procurement of a device or system designed to measure distance accurately, likely for use in transportation infrastructure or maintenance operations. The point of contact for inquiries is Tanner Thomsen, reachable via email at tanner.thomsen@iowadot.us. All responses must be submitted through the official bidding portal at https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=DASIowa, and the performance location is within the state of Iowa, though no specific city or ZIP code is provided.
Iowa

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Commercial Liquid Transmitter SupplyThe contract entails the supply of four commercial off-the-shelf liquid transmitters identified by NSN 6680011922745, fully compliant with all Department of Defense technical, packaging, labeling, and cybersecurity standards. The vendor is responsible for complete production, rigorous testing, detailed documentation, and end-to-end logistics support to ensure readiness for deployment. All deliverables must meet stringent DLA specifications, with no deviations permitted in quality or configuration. The performance location is Robins AFB, Georgia, with a response deadline of August 18, 2026, and the solicitation remains open until that time for qualified subcontractors. The NAICS code 334519 indicates classification under Other Instrument Manufacturing, and the contracting entity is the ASC Supplier Oper OEM Division under the Department of Defense, with no set-aside provisions applied.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Supply of Pressure Dial Indicators (NSN 6685017386741)
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
SHAFT ASSEMBLY, FLEX
Solicitation # SPE4A5-26-T-338D
The contract is for the procurement of 17 units of a flexible shaft assembly, identified by NSN 6680-00-798-3059 and part number M10215-1F112, manufactured in compliance with MIL-DTL-10215P Revision P dated June 3, 2025. The item must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with components subject to Qualified Products List or Qualified Manufacturers List qualifications. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sample lots unless otherwise specified. Packaging must conform to MIL-STD-2073-1E with preservative method 10, and marking must align with MIL-STD-129, without special markings. Palletization follows DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at destination. The required delivery date is February 26, 2027, with a 191-day lead time from contract award. The unit of issue is each, with no quantity variance permitted. The shipping destination is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract solicitation number is SPE4A5-26-T-338D, issued on August 10, 2026, with proposals due by August 18, 2026, under NAICS code 334519, and is managed by the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-338F
The contract is for the procurement of four units of a commercial liquid quantity transmitter identified by NSN 6680-01-192-2745 under solicitation SPE4A5-26-T-338F, issued by the Defense Logistics Agency Aviation’s ASC Supplier Oper OEM Division. Delivery is required within 165 days from award to Robins AFB, Georgia, under FOB Destination terms, with all shipments addressed to SW3119 DLA Distribution Warner Robins. The item is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Packaging must conform to MIL-STD-2073-1E and palletization to DLA’s RP001 requirements, while marking must follow MIL-STD-129 with no special marking code applied, and hazardous materials must be labeled per OSHA’s Hazard Communication Standard. Radioactive materials, if present, must be marked according to MIL-STD-129 when activity exceeds specified thresholds. The contract imposes significant cybersecurity, export control, and compliance obligations. Covered defense information is subject to DFARS 252.204-7012, requiring safeguarding and cyber incident reporting, and the contractor must be CMMC Level 2 certified through a C3PAO. Technical data associated with the item is subject to ITAR or EAR export controls, accessible only to contractors with approved JCP certification, completed DOD export training, and DLA authorization. The contractor must also comply with clauses on whistleblower rights, compensation restrictions for former DoD officials, prohibition of hexavalent chromium, and bans on acquiring telecommunications equipment from Communist Chinese military companies. Inspection and acceptance occur at destination under FAR 52.246-2, with sampling governed by MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. Payment must be submitted electronically through WAWF using a cost voucher or invoice and receiving report depending on line item type. All quotations must be submitted via DIBBS by the closing date of August 18, 2026, and the contractor must maintain current SAM representations, including small business status and telecommunications disclosures. The contract is fixed price and incorporates deviations affecting small business representations, equal opportunity, and cybersecurity clauses.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-271A
The contract pertains to the procurement of a magnetic contactor with NSN 6110-01-493-8900, designated as a critical application item, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The item must be packaged in compliance with MIL-STD-129 and RP001 packaging requirements, with palletization following DLA guidelines, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for approved functional uses such as in batteries, fluorescent lights, or weapon systems specified by NAVSEA, with portable devices containing mercury required to have shockproof construction and secondary containment per NAVSEA 5100-003D. Five line items are listed under the same NSN, each for one unit at a unit price of $1.00, totaling $5.00, with delivery required FOB destination within 20 days of contract award, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. All shipments must be addressed to the designated APO address in Guam, with freight delivery instructions governed by DLAD procedural notes C19 and C20, and the original required delivery date is August 12, 2026, with one line item listed for August 11, 2026. The contract is issued under solicitation SPE7M1-26-T-271A, utilizing the DoD authorized unit of issue, with supplier compliance enforced through detailed marking, labeling, and logistical protocols.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
DIBBS
UNIAXIAL TILT METER
Solicitation # SPE7LX-26-U-9441
The contract pertains to the procurement of 24 units of a Uniaxial Tilt Meter, identified by NSN 1055-01-586-2556, under solicitation SPE7LX-26-U-9441, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The item is classified as a defense article subject to the International Traffic in Arms Regulations, mandating registration with the Directorate of Defense Trade Controls prior to award, with failure to provide evidence of registration rendering offers ineligible. The contract imposes stringent packaging requirements aligned with ASTM D3951 and MIL-STD-129, prioritizing all DLA Master List of Technical and Quality Requirements, including RP001 for packaging and RQ011 for removal of government identification from non-accepted supplies. Delivery is FOB origin within 120 days, with no quantity variance permitted, and inspection and acceptance occur at the destination. The item is covered under CMMC Level 2 Self-Assessment, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List effective as of the solicitation issue date. The unit of issue is each (EA), with the purchase request number 1000239508, and the contract is managed by Amentum Services, Inc. as the vendor, with Theodore Misiolek designated as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334519
New
Federal
Manufacturing & Production Readiness Support
W6QK Acc-Apg

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334519
New
Federal
New Manufacture of Temperature Indicator (End Item Assembly)The contract involves the full-scale manufacture of a temperature indicator as a finished end item assembly, encompassing every phase from component sourcing and procurement through to final assembly, testing, inspection, packaging, and comprehensive documentation—all conforming to strict military standards. This is a subcontract opportunity requiring end-to-end production execution with adherence to defense-grade quality and compliance protocols, ensuring the delivered product meets rigorous operational and technical requirements for military use. The solicitation was posted on August 10, 2026, with a response deadline of August 18, 2026, and is managed under the NAICS code 334519 for other electronic component manufacturing, within the Department of Defense’s structure through the Ok DLA Aviation office in Oklahoma City. The place of performance is unspecified but must accommodate full production capabilities aligned with military logistics and delivery expectations. The contract type is explicitly a subcontract, indicating the prime contractor is seeking a capable supplier to fulfill a critical production requirement as part of a larger defense system or program.
Ok DLA Aviation At Oklahoma City

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9451
This contract pertains to the procurement of a commercial off-the-shelf item identified as AM-01-3 by Ameritape LLC, with NSN 5340015599845, under solicitation SPE7LX-26-U-9451. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, requiring strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, including the special marking code 32 for shelf-life compliance. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, containment, and palletization per DLA’s procurement requirements. The quantity is fixed at 169 units with zero variance allowed, delivered FOB origin within 116 days, with inspection and acceptance occurring at destination. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are verified at Level VII or AQL 0.1. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with Covered Defense Information applicable. This is a total small business set-aside under NAICS code 332722, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7LX-26-U-9483
The item is a nonmetallic seal with NSN 5330-01-568-3876, quantity of 130 units, under purchase request 1000239501, with a delivery requirement of 52 days after order award. This procurement is governed by Defense Logistics Agency packaging requirements and is subject to strict export control regulations under ITAR or EAR, meaning any technical data associated with the seal cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States or foreign subsidiaries of U.S. companies, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies to this technical data, and only DLA contractors with an approved US/Canada Joint Certification Program status, who have completed mandatory training on handling DOD export-controlled data and submitted the DLA export-controlled data questionnaire, are permitted to access or handle the data. The solicitation number is SPE7LX-26-U-9483, posted on August 10, 2026, with a response deadline of August 25, 2026, under NAICS code 332722, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9366
The contract pertains to the procurement of a KNOB with NSN 5355-00-072-1991 and part number 247039, supplied by C&H HYDRAULICS INC under a Women-Owned Small Business Set-Aside solicitation numbered SPE7LX-26-U-9366. The request is for 25 units, each to be delivered FOB origin within 191 days, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The unit of issue is each, and inspection and acceptance occur at the destination. The contract specifies a unit price of $25.00, totaling $625.00, and confirms this is an estimated quantity subject to change. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-9382
This contract pertains to the procurement of 2,717 units of RETAINER, PACKING with NSN 5330-01-154-7159 under solicitation SPE7LX-26-U-9382, issued as a Total Small Business Set-Aside. The requirement mandates compliance with all applicable technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the controlling revision determined by the solicitation issue or award date depending on acquisition size. The item is explicitly prohibited from containing any asbestos as defined in Fed-Std-313 and has been approved for manual exclusion from the First Destination Packaging Program, meaning it is not eligible for standard commercial packaging and must meet proprietary packaging specifications. Delivery must be completed within 94 days after award, and all supplies must be free of government identification if not accepted. The procurement is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact. The NAICS code is 339991, indicating the item falls under Other Miscellaneous Manufacturing, and the solicitation was posted on August 10, 2026, with responses due by August 25, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336360
New
DIBBS
SEAT, VEHICULAR
Solicitation # SPE7LX-26-U-9494
The contract pertains to the procurement of 48 vehicular seats under NSN 2540-01-568-2329, with a delivery deadline of 107 days after order. It is issued under solicitation SPE7LX-26-U-9494, with a response deadline of August 25, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, targeting NAICS code 336360 for motor vehicle body manufacturing. The item contains technical data subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including U.S. company subsidiaries and foreign nationals within the United States, without explicit authorization from the Department of State or Commerce. DFARS 252.225-7048 governs compliance, and access to this data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, having completed mandatory DLA training on export-controlled data handling, and received formal approval from the DLA controlling authority. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring adherence to cybersecurity standards for handling sensitive information. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek listed as the primary point of contact.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336360
New
DIBBS
FOOT REST, VEHICULAR
Solicitation # SPE7LX-26-U-9490
This contract is for the procurement of 60 vehicular foot rests with part number 105-200550-001 and NSN 2540-01-565-9989, issued under solicitation SPE7LX-26-U-9490 by the Department of Defense’s Strategic Acquisition Program Directorate. The item is designated as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The product is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by specifications. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods, materials, and palletization defined under DLA’s packaging guidelines, including the use of intermediate containers and approved cushioning. The item is to be delivered FOB origin within 118 days with zero variance in quantity, and inspection and acceptance occur at the destination point. Sampling and quality assurance follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Unspecified attributes are treated as major. The contract specifies the use of DLA’s authorized unit of issue and references official resources for unit conversion. The vendor, RAVELIN DEFENSE, INC., is required to meet all technical, packaging, and delivery stipulations without deviation. The solicitation was posted on August 10, 2026, with responses due by August 25, 2026, under a federal procurement code NAICS 336360, and point of contact for inquiries is Theodore Misiolek. The estimated quantity is not guaranteed for full purchase by the IDC, and all items must conform to federal defense material standards without exception.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
CHUTE, EJECTION
Solicitation # SPE7LX-26-U-9477
This contract pertains to the procurement of a ejection chute, identified by NSN 1005015521264 and part number TYUW10020A-ETYU, with a quantity of five units to be delivered under solicitation SPE7LX-26-U-9477. Delivery is required within 533 days, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. The item is classified as a covered defense item and falls under demilitarization guidelines for Category I munitions, requiring strict handling and disposal protocols. The contractor must retain supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016, ensuring end-to-end accountability. The contract enforces compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, indicating the need for documented cybersecurity practices to protect sensitive government information. The procurement is under a direct DLA contract for CONUS delivery, using the DoD unit of issue, and the seller is BAE SYSTEMS LAND & ARMAMENTS L.P. The estimated quantity is non-binding and may not be fully purchased by the IDC. The point of contact for inquiries is Theodore Misiolek, with the solicitation issued on August 10, 2026, and responses due by August 25, 2026. The NAICS code 332994 identifies the industry classification, and the procurement is managed by the Department of Defense’s Strategic Acquisition Program Directorate. All technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled based on solicitation or award dates.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9417
This contract is for the supply of SEAL, PLAIN items under solicitation SPE7LX-26-U-9417, designated as a total small business set-aside with a NAICS code of 339991. The items are identified by NSN 5330-01-282-0909 and part numbers 063000143 and A-000-232-113-000, with a total quantity of 14 units delivered in a single line item at a unit price of $14.00. Delivery is required within 112 days from the origin point under FOB terms, with no variance permitted in quantity, and both inspection and acceptance occur at the destination. The item is classified as a critical application with a non-extendable shelf life of 180 months, requiring at least 85% of that shelf life to remain at the time of delivery. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag, and must adhere to MIL-STD-2073-1E for preparation and MIL-STD-129 for marking—with special marking code 32 indicating Type I shelf-life status. Palletization follows DLA’s packaging requirements, and intermediate containers must meet MIL-P-4861 specifications. The contract strictly prohibits the use of ozone-depleting chemicals and intentional addition of mercury or mercury compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and certain reagents approved by NAVSEA. Mercury-containing portable lamps and instruments must have shockproof construction and a secondary containment barrier as defined by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Configuration changes require formal engineering change proposals, and any deviations or waivers must be formally requested. The item is subject to Covered Defense Information protocols, and packaging and shipping of hazardous materials must follow IP025 standards. All documentation and markings must conform to MIL-STD-130N for identification of U.S. military property and the contract uses the DoD-authorized unit of issue as defined in official DLA resources.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9415
This contract, identified by solicitation number SPE7LX-26-U-9415, is a total small business set-aside under NAICS code 332510 for the procurement of 72 units of COVER, ACCESS with NSN 5340-01-245-2424, requiring delivery within 58 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item must be manufactured using a metal casting process, and tooling is essential for production; sourcing and engineering support are available through designated DLA aviation and land-maritime supply chain teams. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, overriding any conflicting specification but not exempting the product from its performance requirements, and mandates prior approval for all substitute chemicals. Technical data associated with the item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to such data is limited to contractors with approved JCP certification, completed DOD export control training, and prior DLA authorization. The contractor must also hold Cybersecurity Maturity Model Certification (CMMC) Level 2 certification from a certified third-party assessment organization. Additionally, all supplies must have government identification removed if not accepted, and the contract falls under DLA’s Controlled Defense Information protocols. The point of contact is Theodore Misiolek, reachable via email or phone, and all responses are due by August 25, 2026.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, DIESEL ENGIN
Solicitation # SPE7LX-26-U-9420
The contract covers the procurement of a Parts Kit for a diesel engine, specifically identified as the Geislinger Coupling, with the NSN 2815-01-547-7099 and part number P12620635, to be supplied by Everlence USA Inc. and Fairbanks Morse, LLC. A total quantity of six kits is required, with no variance allowed in delivery quantity, and delivery is to be made FOB origin within 88 days. The kits must be packaged and preserved in strict compliance with MIL-STD-2073-1E Appendix D for kits, and all marking, labeling, and palletization must conform to MIL-STD-129 and DLA Packaging Requirements. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The unit of issue is KT, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect at the time of solicitation issuance. The contract is issued under solicitation SPE7LX-26-U-9420 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and it is targeted for delivery to CONUS under DLA Direct coverage.
Other Engine Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336320
New
DIBBS
GENERATOR, ENGINE ACCES
Solicitation # SPE7LX-26-U-9365
This contract pertains to the procurement of a generator engine accessory, specifically an alternator, identified by NSN 2920000969252 and part numbers 19020208 and 20039, with a required quantity of seven units. The item is classified as a critical application item and will be delivered FOB origin within 69 days under DLA Direct, CONUS coverage. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement, with a unit of issue of each and a quantity per unit pack of one. The quantity variance is strictly zero percent, meaning no overages or shortages are permitted. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The contract was issued under solicitation number SPE7LX-26-U-9365 with a response deadline of August 25, 2026, and the item falls under NAICS code 336320. The Point of Contact for inquiries is Theodore Misiolek of the Department of Defense’s Strategic Acq Program Directorate.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9464
The contract pertains to the procurement of SEAL, PLAIN ENCASED, identified by NSN 5330-01-614-9289 and part number 556101 from SKF USA INC., with a total quantity of 59 units at a unit price of $59.00, resulting in a total price of $3,481. The item is subject to strict packaging requirements under MIL-DTL-117, TYPE II, CLASS C, STYLE 1, mandating medium duty, waterproof, greaseproof, and opaque bagging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required and palletization following DLA packaging standards. The item is prohibited from containing asbestos as defined in FED-STD-313 and must be delivered FOB origin within 71 days with zero variance in quantity. Inspection and acceptance occur at the destination. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details