This Government Contract opportunity from General Services Administration was posted on November 27, 2006. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

66 -- FSC Group 873

Awarded

7FCM-H6-04-0873-BFederal

Submission Closed11/22/2006, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet if confirmed. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone small businesses, under NAICS code 541380. Bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026, at 3:00 PM CT. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, minimum wages, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

POSTED

DEADLINE

Testing and Inspection ServicesThis subcontract for Testing and Inspection Services involves providing independent material testing and inspection for prime contractors on Texas Government construction projects within Tom Green County. The scope of work focuses on laboratory testing of building sealants and the nondestructive testing of various components to ensure structural integrity and quality control. All services must be performed in strict accordance with ASTM C 1021, ASTM E 329, ASTM E 543, and ASTM E 548 standards. The selected provider is responsible for delivering formal certified test reports and inspection certifications. The solicitation was posted on October 20, 2026, with a response deadline of December 9, 2026.

POSTED

DEADLINE

Environmental Analytical Laboratory Services

California Department of Transportation

POSTED

DEADLINE

Oil, Fuel, and Coolant Analysis Laboratory

California Department of Transportation

POSTED

DEADLINE

Ballistic Production Control Testing (PCT) ServicesThis subcontract opportunity is for Ballistic Production Control Testing (PCT) Services supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The selected provider will perform ballistic testing for prime contractors on DLA and Army projects, specifically conducting Production Control Testing and Ballistic Coupon Testing. All work must be executed in accordance with ATPD 2352 utilizing precision impact analysis tools and high-velocity projectile firing equipment to deliver final Ballistic PCT Test Reports and Certifications. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. Due to the nature of the work and the requirement to handle classified drawings, the contractor must possess a facility clearance and meet CMMC Level 2 compliance standards. Interested parties must submit their responses by November 18, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Laboratory Oil Analysis

6301- Operations- McKinley Facility

POSTED

DEADLINE

Soil and Compaction TestingThis subcontract opportunity involves providing professional soil and compaction inspection and testing services for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will support prime contractors on facility projects, specifically focusing on road and parking upgrades. Key responsibilities include conducting field testing of soil compaction and inspecting sub-grade materials utilizing nuclear densitometers. All resulting soil and compaction test reports must be certified by a Professional Engineer. The solicitation was posted on October 20, 2026, with a response deadline of November 20, 2026. This project falls under NAICS code 541380 and is managed by the Ministry of Environment, Conservation and Parks.

Environment, Conservation and Parks

POSTED

DEADLINE

Environmental Laboratory ServicesThis subcontract for Environmental Laboratory Services supports prime contractors working on projects for the Confederated Tribes of the Colville Reservation. The primary scope of work involves performing laboratory analysis on groundwater samples collected from the Nespelem Post and Pole site, which includes comprehensive data verification and validation processes. To ensure compliance, the service provider must maintain laboratory certification for all specific analytes required by the Quality Assurance Project Plan. The selected contractor is responsible for delivering all analytical reports and laboratory data in an electronic format. This opportunity is categorized under NAICS code 541380 and is centered in Nespelem, Washington. Interested parties should note the response deadline of November 5, 2026.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

SCBA System Installation and Air Quality Certification SpecialistThis subcontract opportunity is for an SCBA System Installation and Air Quality Certification Specialist to support prime contractors on fire department projects for the Wilcox County Board of Commissioners in Georgia. The selected specialist will be responsible for the physical installation of systems, performing comprehensive leak testing, and conducting system startups and operational demonstrations. A critical component of the scope involves using specialized equipment to perform air quality sampling to ensure compliance with Grade E breathing air standards. The final deliverables for this engagement include a fully leak-tested system and a formal Air Quality Certification report. Interested parties must respond by November 19, 2026.

Wilcox County Board of Commissioners

POSTED

DEADLINE

Construction Materials Testing LaboratoryThis subcontract opportunity is for a Construction Materials Testing Laboratory to provide independent testing services for prime contractors working on City of Hollywood Public Utilities projects. The scope of work focuses on the compression testing of repair mortars and cement-based grouts in accordance with ASTM C109, as well as the testing of adhesive dowels. The selected provider will be responsible for delivering certified test reports verifying the strength of both grout and concrete. The solicitation is categorized under NAICS code 541380 and was posted on October 20, 2026. Interested parties must submit their responses by the deadline of November 25, 2026. This contract supports infrastructure quality assurance for public utility projects within the state of Florida.

POSTED

DEADLINE

OGRA Approved LPG Cylinder Inspection ServicesThis subcontract opportunity with Pakistan State Oil Company Ltd involves providing third-party safety and compliance inspections for LPG cylinders used by prime contractors on PSO projects. The selected provider will be responsible for conducting technical inspections, quality assurance checks, and safety certifications utilizing pressure testing equipment and non-destructive testing methods to ensure all cylinders meet the standards set by the Oil and Gas Regulatory Authority. A mandatory requirement for this contract is that the service provider must be OGRA Approved. The scope of work includes the delivery of detailed inspection reports and official safety certifications. Interested parties must respond by October 26, 2026, to be considered for these specialized technical services.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

RFP GF-32077-AS (OGRA Approved Third Party Inspection Services for LPG Cylinders)

Solicitation # GF-32077-AS

Solicitation GF-32077-AS is issued by the Pakistan State Oil Company Ltd for the procurement of OGRA Approved Third Party Inspection Services for LPG Cylinders. The procurement process is conducted in accordance with PPRA Clause 42 b, with electronic bids submitted through the SAP Ariba portal. The response deadline is October 26, 2026, at 09:15 AM. Eligible bidders must be active taxpayers and provide valid NTN, GST/PST certificates, and the CNIC of the owner or authorized representative. To be considered, vendors must demonstrate adequate past relevant experience and financial capabilities, certify that they have not been blacklisted by any public or private entity, and confirm they have not been involved in any fatal accidents during project execution within the last two years. Conditional or partial proposals will be rejected, and any incomplete or false information provided will result in immediate disqualification.

Pakistan State Oil Company Ltd

POSTED

about 23 hours ago

DEADLINE

in 5 days

AI Contract Overview

The General Services Administration's Federal Supply Service, Greater Southwest Acquisition Center, has announced it will no longer accept offers under Solicitation 7FCM-H6-04-0873-B after January 16, 2006. This solicitation covered the Worldwide Multiple Award Federal Supply Schedule for Laboratory Testing and Analysis Services under FSC Group 873. A new solicitation, 7FCB-C4-07-0066-B, is planned for release around January 2, 2007, which will focus on a broader range of scientific equipment and services, including test and measurement equipment, unmanned scientific vehicles, laboratory instruments, furnishings, LIMS, geophysical and environmental analysis equipment, and various testing services spanning mechanical, chemical, electrical, and geophysical fields. This upcoming solicitation will be available exclusively in electronic form through the Federal Business Opportunities website, and it will include various Special Item Numbers (SINs) specifically categorizing different testing and analysis services. The solicitation aligns with FAR Part 12 concerning commercial item acquisitions and implements relevant federal laws such as the Federal Acquisition Streamlining Act and the Clinger-Cohen Act. It introduces a new contract format and data requirements differing from previous solicitations, and offerors are urged to review the documents carefully to meet commercial item provisions. This is a standing solicitation with no closing date for offers, remaining effective until replaced. Contracts awarded under this solicitation will be indefinite delivery indefinite quantity contracts, guaranteeing a minimum of $2,500 for the contract period. Contract terms will initially span five years, with options to extend for up to 20 years in total. The solicitation incorporates clauses for Industrial Funding Fees, Trade Agreements, and small business set-asides, with specific submission requirements including D&B Open Ratings, CCR, and ORCA registrations. The point of contact for this procurement is Bonnie K. Cooper at the GSA/FAS Region 7 Acquisition Center in Fort Worth, Texas.

General Info

GSA ends offers for current lab services contract, launches broader scientific equipment solicitation.

Agency

General Services Administration → Gsa/fas Region 7 Acqusition Center

Contract Value

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TX, USA

Set-Aside

NONE

Awardee

TEAM PLACEMENT SERVICE INC

Award Issued Date

02/01/2005, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

12 updates

PhaseAwarded

PostedNov 6

Presolicitation

Notice updatedNov 10

The notice title changed. The notice description changed. The point of contact changed.

Notice updatedJan 14

The notice title changed. The notice description changed.

Notice updatedFeb 2

The notice title changed.

Notice updatedApr 15

The notice title changed. NAICS code added: 541380. The notice description changed.

Notice updatedJul 7

The notice title changed. The notice description changed.

Notice updatedApr 19

The notice title changed. The notice description changed.

Notice updatedJun 21

Notice details unchanged. Attachments may have changed.

Notice updatedDec 13

The notice title changed. The notice description changed.

Notice updatedJul 19

The notice description changed.

Notice updatedJul 20

The notice description changed.

Notice updatedAug 14

Notice details unchanged. Attachments may have changed.

Notice updatedDec 18

Notice type changed from Presolicitation to Solicitation. The notice title changed. The notice description changed.

AwardedFeb 1

Contract was awarded

Submission Closed

11/22/2006, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center

Contacts1 person available

OfficeFORT WORTH, TX, 76102, USA

Organization / AgencyGeneral Services Administration → Gsa/fas Region 7 Acqusition Center

Office AddressFORT WORTH, TX, 76102, USA

Contacts

Bonnie K. Cooper

contact@example.gov

+1 (555) 000-0000

Full Description

No Description Provided

More opportunities from General Services Administration → Gsa/fas Region 7 Acqusition Center

Same awarding agency

NAICS: 541330

Federal

Quality Assurance and Acceptance Testing CoordinationThis contract focuses on ensuring that HVAC units comply with merchantability and fitness-for-purpose standards, emphasizing quality assurance throughout the procurement process. The contractor is responsible for supporting government inspections as well as managing the resolution of any defects discovered after acceptance of the units. This helps guarantee that the delivered HVAC systems meet the required operational and quality benchmarks. The subcontract, titled "Quality Assurance and Acceptance Testing Coordination," is issued by the General Services Administration's GSA/FAS Region 7 Acquisition Center. The performance location is San Diego, specifically within the 92135 postal zone. The contract falls under NAICS code 541330, which pertains to engineering services. While specific points of contact and detailed organizational information are not provided, the contract requires a focus on coordinating acceptance testing and ensuring compliance with quality standards in support of federal procurement objectives.

POSTED

DEADLINE

Transportation and Final Mile Delivery (FOB Destination, CONUS)This contract involves the transportation and final mile delivery of air conditioning units to Naval Air Station North Island, California, under a FOB destination arrangement within the continental United States. The responsibility and risk of loss for the goods transfer to the buyer upon delivery at the specified destination. The procurement is managed by the General Services Administration's Region 7 Acquisition Center, aligning with the NAICS code 484220, which pertains to specialized freight trucking. The scope covers safe and timely delivery of the freight to the designated location in San Diego, CA, ensuring compliance with all relevant regulations and requirements. While specific solicitation details such as a number or set-aside information are not provided, the contract is positioned as a subcontract opportunity aimed at supporting government logistics needs within CONUS, emphasizing the critical role of reliable final mile delivery services for government installations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Marking, and Labeling Services (MIL-STD-129R Compliance)This contract involves providing packaging, marking, and labeling services for HVAC units in compliance with military standards, specifically MIL-STD-129R. The work includes preparing military-compliant packaging, applying the appropriate labeling and markings, and ensuring the inclusion of CAGE codes and UID tagging as required by the standard. The services are intended to meet stringent military specifications to ensure proper handling, identification, and traceability of the HVAC equipment. Issued as a subcontract under the NAICS code 561499, which covers specialized services related to packaging and labeling, the contract is managed by the General Services Administration (GSA) through the Region 7 Acquisition Center. The place of performance is designated to be in San Diego, California, with the postal code 92135. This contract emphasizes adherence to military logistics and identification protocols to support the secure and efficient transportation and tracking of HVAC units.

All Other Business Support Services

POSTED

DEADLINE

Commercial Air Conditioning Unit Supply (Amana TPAC Units)The contract involves the supply of Amana-branded through-the-wall air conditioning units, specifically the TPAC models, to a military installation located in San Diego. The scope covers the complete procurement process, including testing, packaging, and providing all necessary documentation to ensure proper delivery and installation. This subcontract falls under NAICS code 333415, which pertains to air conditioning and warm air heating equipment manufacturing. Administered by the General Services Administration’s Region 7 Acquisition Center, the contract aims to fulfill the military’s operational requirements for reliable and efficient cooling solutions. The focus on thorough testing and correct packaging highlights the importance of quality assurance and readiness to meet the demands of the installation environment. The contract was posted in early May 2026, indicating a forthcoming or ongoing acquisition to maintain climate control infrastructure at the designated location.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Domestic Supply Chain Compliance & CertificationThis contract involves providing advisory and verification services to ensure that products and components comply with the Buy American Act, the Federal Acquisition Supply Chain Security Act (FASCSA), and federal restrictions related to supply chain vulnerabilities caused by foreign adversary-controlled elements. The focus is on certifying that supply chains are free from components subject to such restrictions, helping government agencies maintain compliance with federal regulations designed to protect national security interests and promote domestic sourcing. The contract is a subcontract categorized as a Total Small Business Set-Aside under FAR 19.5, specifically aligned with NAICS code 541611, which covers administrative management and general management consulting services. It is issued by the General Services Administration's Federal Acquisition Service, Region 7 Acquisition Center. The place of performance corresponds to a location with zip code 99301. This contract represents an opportunity for small businesses specializing in compliance consulting, risk assessment, and supply chain verification to assist federal clients in aligning with evolving regulatory frameworks addressing domestic sourcing and foreign adversary concerns.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Marking, and Barcoding ServicesThis contract involves providing specialized packaging, labeling, and 2D PDF417 barcode application services for currency counting machines, ensuring compliance with MIL-STD-129R and ASTM D3951 standards. The services include applying the necessary data fields on the packaging to meet military and industry barcode specifications. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, targeting qualified small businesses. Administered by the General Services Administration’s Region 7 Acquisition Center, the contract falls under NAICS code 561910, which pertains to packaging and labeling services. The work is to be performed within the designated area corresponding to the ZIP code 99301. This contract opportunity aims to support federal procurement goals while ensuring standardized and traceable packaging for specialized machinery.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Currency Counting Machines (NSN 7490015997186)This contract involves the supply and delivery of commercial off-the-shelf currency counting machines identified by NSN 7490015997186. The machines must comply with federal packaging, marking, and compliance standards, ensuring they meet government quality and regulatory requirements. The procurement is conducted as a subcontract under a Total Small Business Set-Aside, in accordance with FAR 19.5, encouraging participation from small businesses. The contract is managed by the General Services Administration's Region 7 Acquisition Center, operating under NAICS code 333318, which pertains to commercial and service industry machinery manufacturing. The place of performance is associated with the ZIP code 99301, and the contract was posted on February 10, 2026. This opportunity supports small business engagement while providing essential currency counting equipment to federal agencies.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Small Business Subcontracting Plan Development & ComplianceThis contract involves the development and implementation of a subcontracting plan that complies with the Federal Acquisition Regulation (FAR) requirements, specifically addressing small business participation goals as mandated by clause 52.219-9. The work is classified under the NAICS code 541611 and is set aside entirely for small businesses under the Total Small Business Set-Aside provision outlined in FAR 19.5. The contract is managed by the General Services Administration’s Region 7 Acquisition Center, with the place of performance located in Seal Beach, California, ZIP code 90740. The primary objective is to ensure adherence to all FAR compliance standards while promoting the inclusion of small businesses in subcontracting opportunities. This includes establishing measurable goals for small business participation and maintaining accountability throughout the contract lifecycle. The emphasis on small business involvement reflects the federal government’s commitment to supporting small enterprises through structured subcontracting plans aligned with regulatory requirements.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Transportation and Delivery to Seal Beach, CAThis contract involves the final delivery of 40 stainless steel container assemblies to Seal Beach, CA 90740. The scope includes not only the transportation of these heavy industrial cargo items but also the coordination of all logistics required to ensure their safe and timely arrival. The contract is a subcontract classified under NAICS code 484220, which pertains to specialized freight trucking, indicating that the transportation and handling of large or heavy industrial goods is a critical component of the work. The contract is a Total Small Business Set-Aside under FAR 19.5, reflecting an effort to support small businesses. It is managed by the General Services Administration’s Region 7 Acquisition Center, though specific contact details and the solicitation number are not provided. The place of performance is specifically the city of Seal Beach with the zip code 90740, confirming the delivery location. This arrangement demonstrates the government’s reliance on specialized subcontractors to handle complex logistics and transportation needs for critical industrial equipment.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Labeling and Marking ServicesThis contract involves providing labeling and marking services in accordance with federal standards FED-STD-123H or MIL-STD-129R, which includes applying durable barcode labels for shipment tracking of container assemblies. The work is designated as a total small business set-aside under the SBA guidelines (FAR 19.5), ensuring opportunities for small businesses to compete. The contract falls under NAICS code 811411, related to commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance. The solicitation is managed by the General Services Administration's Region 7 Acquisition Center, with the place of performance specified as Seal Beach, California, ZIP code 90740. Although some organizational and point of contact details are not provided, the contract requires subcontracting for a service critical to logistics and inventory management, emphasizing compliance with military and federal standards for labeling and shipment tracking.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Packaging and Protective CratingThe contract involves providing protective packaging for 40 stainless steel containers to ensure their safety during shipment, handling, and storage, meeting the standards set by ASTM D3951. It is designated as a subcontract under a total small business set-aside in accordance with FAR 19.5, targeting businesses within that category. The contract falls under the NAICS code 561910, which pertains to support services. This agreement is issued by the General Services Administration (GSA) through the GSA/FAS Region 7 Acquisition Center. The work is to be performed in Seal Beach, California, with the specified ZIP code 90740. The contract was posted on January 27, 2026, and focuses on packaging and protective crating services, emphasizing compliance with quality and industry standards to prevent any damage to the stainless steel containers throughout the logistics process.

Packaging and Labeling Services

POSTED

DEADLINE

Stainless Steel Container ManufacturingThis contract involves the fabrication of 40 stainless steel container assemblies designed with double-door access, lockable wheels, and internal shelving, strictly adhering to the specifications outlined by the National Stock Number 8115-01-377-8817. The contract is a subcontract awarded under a Total Small Business Set-Aside in accordance with FAR 19.5, indicating that only qualified small businesses could compete for this opportunity. The associated NAICS code is 332311, which pertains to fabricated structural metal manufacturing. The contracting agency responsible is the General Services Administration (GSA) through its FAS Region 7 Acquisition Center. The place of performance is designated as Seal Beach, with the ZIP code 90740. Though specific office contact details are not provided, the contract posting date is January 27, 2026, and further contract details are available through the provided URL on the SAM.gov platform. This contract emphasizes high-quality stainless steel manufacturing compliant with government standards, tailored for logistical or storage purposes requiring mobility and secure access.

Prefabricated Metal Building and Component Manufacturing

POSTED

9 months ago

DEADLINE

N/A

View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS