Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

66--METER,SPECIAL SCALE

Active
N0010426QYAGLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This presolicitation notice from the Department of Defense, specifically Navsup Weapon Systems Support Mech, is for the procurement of 12 units of a special scale meter under NSN 7H-6625-017025026. The delivery terms are FOB Origin. The government intends to solicit and negotiate with a single source under FAR 6.302-1 because it does not own the technical data rights and has determined that purchasing those rights or reverse engineering the part is uneconomical. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. While the government is not currently using FAR Part 12 for commercial item acquisition, potential vendors may notify the contracting officer of their ability to provide a commercial alternative within 15 days. This acquisition may be subject to the Buy American Act, Free Trade Agreements, and the World Trade Organization Government Procurement Agreement.

General Info

DoD seeks 12 special scale meters via single source procurement, FOB Origin.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

334514 - Totalizing Fluid Meter and Counting Device ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 7H-6625-017025026, TDP VER 001, REF NR 9230-04-0005, QTY 12 EA, DELIVERY FOB ORIGIN. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-2667 or 215-697-2179(DSN: 442-2667), or mail their requestDLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. One or more of the items under this acquisition is subject to: Free Trade Agreements, if DFARS clause 252.225-7036 Buy American Act--Free Trade Agreements--Balance of Payments Program, is included in the solicitation. The World Trade Organization Government Procurement Agreement and Free Trade Agreements, if DFARS clause 252.225-7021 Trade Agreements, is included in the solicitation.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 335932
New
Federal
TUBING HEAT
Solicitation # N0010426QAC75
This contract pertains to the manufacture of TUBING HEAT under solicitation number N0010426QAC75, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The work requires strict adherence to Drawing 2674051P1, Revision D, and compliance with multiple military standards including MIL-STD-130 for marking, MIL-STD-973 for configuration control, and MIL-STD-2073 for packaging. The item must have a minimum of 85 percent shelf life remaining upon receipt, with a total shelf life of 60 months and a non-extendable shelf-life code of S_UU. Delivery is due within 90 days of contract issuance, and all supplies are subject to Government source inspection as mandated by FAR 52.246-2. The contract specifies detailed requirements for material, labeling, configuration management, and documentation, including mandatory submission of engineering change proposals and waivers to the designated contracting office. The procurement is a total small business set-aside under DEV 2026-O0037, and contractors must comply with security prohibitions, cybersecurity maturity model certification requirements, and the Navy’s use policies for AbilityOne support contractors. Payment will be processed through Wide Area Workflow using a combined invoice and receiving report, with all contractual documents deemed issued upon electronic transmission. Only vendors listed on OD36190 are eligible for award, and no substitute items are permitted without prior government testing and approval. The point of contact for inquiries is Jennifer L. Henry, reachable at the provided Navy email and phone number. All referenced documents, including specifications and standards, must be obtained through official DOD sources, and no deviation from requirements is allowed without formal authorization. This contract binds the contractor to full compliance with all technical, logistical, and administrative conditions outlined in the solicitation and supporting documents.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
Federal
NUT,HEX,SELF-LOCKIN
Solicitation # N0010426QFE05
This contract mandates the supply of self-locking heavy hex nuts designated as Special Emphasis Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to MIL-DTL-32258 with specific chemical and mechanical requirements tied to QQ-N-281 Class A or B, and the self-locking element must comply with ASTM-D6456 or ASTM-D4066 depending on temperature rating. Traceability is strictly enforced through unique heat-lot markings on each component and mandatory certification documentation that must directly link to the physical item, with no transcription permitted. All certifications must include full compliance statements signed by authorized personnel, with disclaimers strictly prohibited. Quality assurance systems must comply with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative including MIL-I-45208 and MIL-STD-45662, subject to government audit at source. First Article Testing requirements are satisfied through prior qualification data or letters from qualified sources, and all material must undergo 100% inspection for traceability marking, certification completeness, and nondestructive testing results. Delivery is governed by a strict schedule requiring certification data submission 20 days prior to shipment and formal acceptance by Portsmouth Naval Shipyard via the WAWF system before any material may be shipped. Final delivery must occur no later than 365 days after contract award, with the order rated DO for national defense priorities. Materials must be mercury-free, marked in accordance with MIL-STD-792, and all internal threads must be cut, not cold-formed. Subcontractor oversight, material handling procedures, and re-certification after processing are tightly controlled, and any deviation or waiver requires prior written approval from the Contracting Officer. All documentation must be submitted electronically through ECDS and WAWF, with notifications sent to designated Navy email addresses, and compliance is monitored under emergency acquisition flexibilities.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332919
New
Federal
VALVE,ASSEMBLY
Solicitation # N0010425QYM53
This contract pertains to the manufacture and quality requirements for a valve assembly under solicitation number N0010425QYM53, issued by the Naval Supply Weapon Systems Support Mechanical office, part of the Department of Defense. The solicitation was posted on March 25, 2026, with responses due by May 18, 2026. The procurement follows a fixed-price arrangement with government source inspection required to ensure compliance. The contract incorporates stringent standards including MIL-STD-130 for item marking, MIL-I-45208 for inspection system requirements, and ISO9001, reflecting a high emphasis on quality assurance. The items supplied must be mercury-free due to their intended use on submarines and surface ships, with explicit prohibitions and testing protocols to prevent mercury contamination. The contract specifies that any design, material, or part number changes require written approval from the contracting officer unless classified as minor changes under Code 1, which still require notification. The packaging and preservation must comply with MIL-STD-2073 standards, with freight terms FOB origin. Documentation availability and ordering instructions for referenced military and federal specifications are detailed, with handling protocols for classified or restricted-use documents. The award will be bilateral, requiring the contractor's written acceptance before execution. Key contract points include ensuring all products meet detailed requirements, maintaining inspection records for four years, and adherence to both government and relevant industry quality and packaging standards. The main point of contact is Tyreese C. Smith, reachable via email and phone in Mechanicsburg, Pennsylvania.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 30 days
View Details