78--Gym Equipment

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is W91242-20-Q-0047_01 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 451110 with a small business size standard of $15.00M. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-06-23 16:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Wilmington, NC 28405 The National Guard - North Carolina requires the following items, Brand Name or Equal, to the following: LI 001: Installation and removal of all debris is required. There is not a dumpster on site available for dumping., 1, JOB; LI 002: Bumper Plate Set; This Item to be as manufactured by Vulcan Strength Training Systems, or prior approved equal. a. 1000 lbs. of varying weight - (4) Pair of 10lbs - (4) Pair of 25 lbs. - (2) Pair 25 lbs. - (3) Pair 35 lbs. - (3) Pair 45 lbs. - (2) Pair 55 lbs. b. Made of Vulcanized Rubber c. No rubber coated iron plates d. Shore Durometer A 87.7 - 89.3 e. Safe for platform use f. Black in color, 1, Set; LI 003: (5) barbells; This Item to be as manufactured by Vulcan Strength Training Systems, or prior approved equal. - (3) 20 kg Barbells - (2) 15 kg Barbells - Bushing bar: Four Oilite self-lubricating bushings each sleeve - Variants: o 3 x 28.5 mm diameter: Men's 20 kg bar (Mixed use bar) o 2 x 25 mm diameter: Women's 15 kg bar (Olympic training bar) - Verified 196 K PSI tensile strength - Medium knurling; No center knurl - Finely grooved sleeves - Reflexive steel (Moderate to good whip), 5, EA; LI 004: (6) kettlebells; This Item to be as manufactured by Vulcan Strength Training Systems, Absolute training VBKB series or prior approved equal. 1. Steel Construction 2. Black Powder Coated 3. Variants - 3 x 16 kg - 2 x 24 kg - 1 x 32 kg, 5, EA; LI 005: (5) sets of spring collars; This Item to be as manufactured by Vulcan Strength Training Systems, model OBRSC or prior approved equal. 1. 2 Spring collars 2. Compatible with CrossFit, Power Lifting, or Weightlifting needs, 5, Set; LI 006: (5) medicine balls; This Item to be as manufactured by Vulcan Strength Training Systems, VSMB series or prior approved equal. 1. Variants - 1 x 6 lb. - 1 x 8 lb. - 1 x 10 lb. - 1 x 12 lb. - 1 x 14 lb. 2. 14 diameter, 45 - circumference 3. Black in color, 5, EA; LI 007: (2) plyometric boxes; This Item to be as manufactured by Vulcan Strength Training Systems, model 3 in 1 Wood Plyo Box or prior approved equal. 1. Dimensions 20 x 24 x 30 2. Solid on all 6 sides 3. Sanded to completely avoid sharp edges 4. Polyurethane coated, 2, EA; LI 008: (2) Squat Stands; This Item to be as manufactured by Vulcan Strength Training Systems, model V-Hammer II or prior approved equal. 1. Heavy duty 2.5" x 2.5", 8-gauge steel (4.28 mm) 2. Heavy duty UHMW coated 3/8" J hooks and spotter arms 3. Professional Grade J Hooks with 1.5" thick UHMW 4. 1" holes with 2" spacing 5. Heavy Duty one-inch Black Oxide coated bolts 6. Stands can be bolted the floor for added stability 7. Weight Plate pegs with safety pins 8. UHMW lined Safety spotters. 9. Dimensions 93.5" x 48" x 50", 2, EA; LI 009: (1) Glute Ham Developer, This Item to be as manufactured by Vulcan Strength Training Systems, model GHD-NS or prior approved equal. 1. Fully adjustable dual pads with slight angle 2. Accommodate any user 5ft to 7ft and 300 lbs. 3. Built in band hooks for the resistance band work 4. Diamond plate step riser for easy entry and dismount 5. Heavy Duty one-inch Black Oxide coated bolts 6. Construction: 2 x 3 Box Steel Color: Black 7. Main tube size: 70 x 50 x 2.5mm 8. Warranty: Lifetime warranty on frame, 6 months on moving parts, 3 months on upholstery, 1, EA; LI 010: (5) Ultra Speed Cable Rope; This Item to be as manufactured by Vulcan Strength Training Systems, model VUCSR or prior approved equal. 1. 3mm cable 2. Approximately 12 ft of cable to allow adjustments, 5, EA; LI 011: (2) Slam Balls; This Item to be as manufactured by Vulcan Strength Training Systems, model Vulcan Slammer series or prior approved equal. 1. 20 lbs. each 2. Three-year warranty against rupturing, 2, EA; LI 012: (1) Adjustable Bench, This Item to be as manufactured by Vulcan Strength Training Systems, model VPrime or prior approved 1. 12 Pad width, 2.5 thickness with coarse vinyl covering 2. Dimensions: L: 50" x W: 29" x H: 18" 3. Lifetime warranty on frame and steel parts 4. 6-month warranty on upholstery 5. Bench Adjustability - 12 adjustment notches on the upper bench - 3 adjustment notches on the bench seat, 1, EA; LI 013: (1) Half Rack with Deadlift Platform, This Item to be as manufactured by Vulcan Strength Training Systems, model V-HR-PRO or prior approved equal. 1. Height: 96" 2. Inside dimension: 42"W x 52"L 3. Outside Dimension: 49" W x 57" L 4. Safety Spotter length: 24 " 5. Finish: Charcoal Matte Powder Coat 6. Construction: - 7 Gauge 3" x 3" uprights - 6.5 mm Offset Steel reinforcements for maximum rigidity and durability - Industrial grade raw hard chrome finish to reduce corrosion. - Multi-grip pull up bar with knurled handles - Detachable upper and lower band pegs - 15" length hard chromed weight posts - Dual Bar holder in rear - Accessory and belt hooks, 1, EA; LI 014: (1) rower, This Item to be as manufactured by Vulcan Strength Training Systems, model Scull rower, V-SCU-R or prior approved equal 1. Construction: Black plastic, steel, and aluminum 2. Black in color 3. Monorail design 4. Dimensions: L: 50" x W: 29" x H: 18" 5. Weight capacity: Tested to 350 lbs. 6. Console Monitor 7. Warranty: Lifetime warranty on Frame. 2 Years warranty on moving parts, 1, EA; LI 015: (1) hex trap bar; This Item to be as manufactured by Vulcan Strength Training Systems, model V-HEX or prior approved equal. 1. Construction: 2 x 2 Steel 2. Dimensions: - Length: 82 end of sleeve to end of sleeve - Width: 28 - Inside Dimensions: 24 x 24 - Weight: 75 lbs., 1, EA; LI 016: (1) Recumbent Cycle; This Item to be as manufactured by Precor, model RBK 835 or prior approved equal. 1. Self-powered 2. LED Display 3. Step-through Design with a low step-over height 4 in. and 14 in. wide. 4. One-handed Seat Adjustment 5. Dual sided pedals. One side with integrated straps 6. Commercial Grade, 1, EA; LI 017: (1) Treadmill; This Item to be as manufactured by Precor, model TRM 835 or prior approved equal. 1. 120-volt, 20-amp circuit 2. LED Display 3. 4 HP AC Motor 4. Speed Range: 0.5-16 mph 5. Commercial Grade, 1, EA; LI 018: (1) elliptical; This Item to be as manufactured by Precor, model EFX 833 or prior approved equal. 1. Self-Powered 2. Fixed handlebars 3. LED Display 4. Ramp Angle: 10-35 degrees 5. Step-up Height 8in/ 20 cm (pedal at lowest point) 6. 20 levels of resistance 7. Commercial Grade, 1, EA; LI 019: (1) elliptical; This Item to be as manufactured by Precor, model AMT 835 or prior approved equal. 1. Self-Powered 2. Moving handlebars 3. LED Display 4. Adaptable Stride a. Length: zero to 36 b. Height: 6.8 to 10 c. 5 Levels 5. Commercial Grade, 1, EA; LI 020: (1) Climber: This Item to be as manufactured by Precor, model CLM 835 or prior approved equal. 1. Self-Powered 2. Heart Rate Monitor measured through handlebars 3. LED Display a. Pulley-drive System 4. Step Rate a. 30- 180/ min b. 31 Levels 5. Commercial Grade, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, National Guard - North Carolina intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Guard - North Carolina is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at +1 (555) 000-0000 or via email at contact@example.gov. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at +1 (555) 000-0000 or contact@example.gov of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis, meaning that the award will be made to the contractor who submits the quote with the lowest price that meet all of the requirements of the solicitation. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-2, Evaluation- Commercial Items; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. Bid MUST be good for 45 calendar days after close of Buy. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty.