Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

8 Passenger Club Pallet & Medical Pallet for C130 Aircraft

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Coast Guard, under the Department of Homeland Security, is forecasting the procurement of an 8 passenger club pallet and a medical pallet specifically designed for C130 aircraft. This requirement falls under NAICS code 336360 and is intended to support aircraft configurations for passenger and medical transport. The place of performance for this contract is located in San Antonio, Texas. Interested parties may coordinate with the primary point of contact, Brandon Kelly, or alternate contact Robbin Kessler, while small business inquiries are directed to Jackie Dickson.

General Info

US Coast Guard procuring passenger and medical pallets for C130 aircraft in Texas.

Agency

Department of Homeland Security → United States Coast Guard

NAICS

336360 - Motor Vehicle Seating and Interior Trim Manufacturing

Place of Performance

San Antonio, TX, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 24

forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment of Homeland Security → United States Coast Guard

Contacts3 people available

OfficeN/A

Organization / AgencyDepartment of Homeland Security → United States Coast Guard

Office AddressN/A

Contacts

Brandon Kelly

contact@example.gov

+1 (555) 000-0000

Robbin Kessler

contact@example.gov

+1 (555) 000-0000

Jackie DicksonSmall Business Specialist/APFS Coordinator

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Purchase of an 8 passenger club pallet and a medical pallet for C130 aircraft

Similar Contracts

Same NAICS industry code

BOX, ACCESSORIES STOWAG

Solicitation # SPE7L4-27-T-0749

Solicitation SPE7L4-27-T-0749 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of one Commercial Off The Shelf accessories stowage box. The item is identified by NSN 2540016991929 and part number CSD242416 from Hoffman Engineering Co. The required delivery is five days after receipt of the order, with the FOB, inspection, and acceptance points all set to destination, specifically for the USS INDIANAPOLIS LCS 17. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and prohibits the use of Class I ozone depleting chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations must be submitted via the DIBBS portal by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

EQUIPMENT KIT, VEHICULA

Solicitation # SPE7L3-27-T-1721

Solicitation SPE7L3-27-T-1721 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 39 units of Vehicular Equipment Kits. The required items are identified by NSN 2540-01-721-5342 and are associated with Jankel Tactical Systems LLC, part number K000733. The required delivery date is April 17, 2027, with a delivery period of 151 days after the order is placed. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. Inspection and acceptance will occur at the destination. Key restrictions include a prohibition on the use of Class I ozone-depleting chemicals and a ban on items produced via additive manufacturing. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and reporting cyber incidents. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Quotations are due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 9 hours ago

DEADLINE

SEAT, VEHICULAR

Solicitation # SPE7L4-27-T-0563

Solicitation SPE7L4-27-T-0563, issued by the DLA Weapons Support SLO Combat Vehicles and Armament, is for the procurement of eight vehicular seats under NSN 2540-01-669-6318. The contract is not a small business set-aside and falls under NAICS code 336360. Deliveries are required to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of April 20, 2027, and an original required delivery date of May 23, 2027. The total delivery timeframe is specified as 168 days. Technical compliance requires that items meet cited drawings and that the manufacturer's inspection system adheres to ISO 9001:2015 or an equivalent standard. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AK16696318 Revision B. The contract incorporates strict export controls under ITAR and EAR, requiring approved JCP certification for access to technical data. Invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include the Buy American Act, the Berry Amendment for domestic sourcing, and DFARS 252.204-7012 for safeguarding covered defense information. Quotations are due by November 2, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

Manufacturer of Fitted Vehicular Body Covers (NSN 2540016637411)This subcontract involves the fabrication and supply of 18 fitted vehicular body covers for prime contractors supporting Department of Defense projects. The covers must be manufactured according to NSN 2540016637411 specifications using precise molds or templates. All packaging must adhere to MIL-STD-129 and ASTM D3951 marking and labeling standards. The project is managed by the DLA Weapons Support Strategic Acquisition Program Directorate under NAICS code 336360. Key compliance requirements include obtaining engineering source approval from the Government design control activity and ensuring full adherence to the Berry Amendment. The response deadline for this opportunity is November 17, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SEAT, VEHICULAR

Solicitation # SPE7LX-27-U-0492

Solicitation SPE7LX-27-U-0492 is a small business set-aside issued by the DLA Weapons Support Strategic Acq Program Directorate for the procurement of vehicular seats under NSN 2540017285967. This requirement may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated quantity of 5 units. Quotations are due by November 17, 2026, and must be submitted based on FOB Origin terms. The delivery timeline is specified as 92 days, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically referencing RA001, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. All packaging must comply with MIL-STD-129 and ASTM D3951, with specific protocols for hazardous materials per FED-STD-313. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. Additionally, offerors must comply with domestic material restrictions, including the Berry Amendment and Buy American Act, and meet cybersecurity standards outlined in DFARS 252.204-7012.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

COVER, SEAT, VEHICULA

Solicitation # SPE7L1-27-T-3194

Solicitation SPE7L1-27-T-3194 is a Request for Quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one vehicular seat cover. The required item is identified by NSN 2540661532079 and part number LTE-V07-0001-01 from Thales Australia Bendigo Land Z0655. Quotations must be submitted via the DIBBS system by November 13, 2026. The delivery terms are FOB Origin with a required delivery date of April 14, 2026, and a delivery window of 10 days after the order. Both inspection and acceptance will take place at the destination in Clackamas, Oregon. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling in accordance with the Hazard Communication Standard. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

COVER, FITTED, VEHICULAR

Solicitation # SPE7LX-27-U-0467

Solicitation SPE7LX-27-U-0467 is a small business set-aside request for quotations issued by the DLA Weapons Support Strategic Acq Program Directorate for the procurement of 18 fitted vehicular body covers, identified by NSN 2540-01-663-7411. This is a restricted source item requiring engineering source approval from the Government design control activity. The contract is structured as a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. Delivery is required within 88 days after receipt of order with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Alternate offerors must provide extensive technical documentation per MIL-T-31000, including all manufacturing drawings, process sheets, and source identification for critical operations. If original equipment manufacturer drawings are unavailable, an engineering analysis report or detailed reverse engineering procedure is required. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all shipments labeled according to MIL-STD-129. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. The solicitation also mandates compliance with domestic material restrictions, including the Berry Amendment and Buy American Act, and prohibits the use of additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SEAT, VEHICULAR

Solicitation # SPE7L4-27-U-0131

Solicitation SPE7L4-27-U-0131 is a request for the procurement of 95 adjustable vehicular seats with backrests, identified by NSN 2540011548406. The requirement specifies compatible part numbers from Oshkosh Defense LLC (122998C) and Seats Inc (130726HN303). This procurement is issued by the DLA Weapons Support LSO Combat Vehicles and Armament and is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The delivery timeline is 63 days after receipt of order, with shipping terms set as FOB Origin under the First Destination Transportation program. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements under RP001. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. The solicitation is open for quotations until November 17, 2026, and may be awarded automatically based on price and technical acceptability.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

INSULATION, VEHICULAR

Solicitation # SPE7L3-27-T-1685

Solicitation SPE7L3-27-T-1685 is issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 38 units of vehicular insulation, identified by NSN 2540-01-605-9624. The contract requires delivery within 52 days after the delivery order, with a need ship date of January 5, 2027, and an original required delivery date of January 15, 2027. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging must adhere to MIL-STD-129 for marking and labeling, with specific requirements for hazardous materials per FED-STD-313 and TQ requirement IP025, or commercial packaging per ASTM D3951 for non-hazardous items. Palletization must follow RP001 standards. The contract prohibits the use of additive manufacturing processes unless specifically authorized. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports, and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

FRAME SECTION, SEAT,

Solicitation # SPE7M1-27-T-1180

Solicitation SPE7M1-27-T-1180 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the procurement of 24 seat frame sections, identified by NSN 2540-01-698-0888. The requirement falls under NAICS code 336360 and is open to full and open competition, though certified HUBZone concerns may receive a price evaluation preference. Delivery is required within 76 days after receipt of order, with shipping terms established as FOB Origin and inspection and acceptance also occurring at the origin. The items are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, including prohibitions on Class I ozone-depleting chemicals and specific packaging standards under ASTM D3951 and MIL-STD-129. Due to the nature of the technical data, the procurement is subject to ITAR and EAR export controls, requiring offerors to possess an approved US/Canada Joint Certification Program certification. Additionally, the solicitation incorporates cybersecurity requirements including CMMC Level 2 assessments and mandates the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Offerors must also comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0741

Solicitation SPE7L4-27-T-0741 is a small business set-aside request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of four tarpaulins, identified by NSN 2540-01-728-7521. The procurement falls under NAICS code 336360. Quotations must be submitted via the DIBBS system by November 13, 2026. The required delivery date is October 22, 2026, with a delivery timeframe of 20 days after order. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination in Marksville, Louisiana. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 for non-hazardous commercial packaging. Hazardous materials must be packaged per TQ requirement IP025 and labeled according to the Hazard Communication Standard. All packaging must comply with MIL-STD-129 and RP001 palletization requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and cybersecurity safeguarding of covered defense information.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

LADDER, VEHICLE BOARDIN

Solicitation # SPE7L4-27-T-0726

Solicitation SPE7L4-27-T-0726 is a request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of 40 vehicle boarding ladders. The required items are identified by NSN 2540016819819 and Oshkosh Defense LLC part number 57K9205. The required delivery date is May 23, 2027, with a delivery timeframe of 191 days after the order. Shipping is set as FOB Origin, and the destination for both inspection and acceptance is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract incorporates strict technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. It adheres to various FAR and DFARS clauses, specifically emphasizing the Buy American Act, safeguarding covered defense information under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 12, 2026, and must be submitted via the DLA-BSM Internet Bid Board System.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

More opportunities from Department of Homeland Security → United States Coast Guard

Same awarding agency

FY27 Base Alameda Refuse and Recycling Collection ServicesThe United States Coast Guard is seeking firm-fixed-price refuse, recycling, and organics collection and disposal services for Coast Guard Island and associated housing facilities in Alameda, California. The scope of work includes scheduled collection from commercial containers, the disposal of waste from government-furnished 40-cubic-yard roll-off containers, and residential waste services for approximately 310 housing units. All activities must comply with federal, state, and local environmental regulations. The anticipated period of performance begins April 1, 2027, and runs through March 31, 2028, with four optional one-year extensions available through March 31, 2032. This acquisition will be guided by an updated Performance Work Statement and Independent Government Cost Estimate to reflect current collection frequencies and service locations. The current incumbent for these services is Alameda County Industries, Inc.

Solid Waste Collection

POSTED

DEADLINE

Expeditionary Cutter Squadron lodging in Subic Bay, PhilippinesThe United States Coast Guard, under the Department of Homeland Security, is forecasting a requirement for hotel and lodging accommodations to support the Expeditionary Cutter Squadron in Subic Bay, Philippines. This procurement falls under NAICS code 721110 and is intended to ensure proper housing for members operating within that specific region. The current incumbent contractor for these services is SCA Shipping Consultants, Associated. Interested parties may coordinate with the primary point of contact, Amad Hankins, or the alternate contact, Tyrone Minnifield, while small business inquiries are directed to Jackie Dickson.

Hotels (except Casino Hotels) and Motels

POSTED

DEADLINE

Base Borinquen Janitorial ServicesThe United States Coast Guard is seeking janitorial services for Base Borinquen and the USCG Exchange located in Aguadilla, Puerto Rico. These services are essential for maintaining sanitary conditions and a professional aesthetic appearance across government buildings to support the health and safety of military members, civilian employees, and the public. Because the base lacks the internal capacity to perform these tasks, the contract is critical for ensuring that housing and facilities meet acceptable living standards, which directly impacts the organization's ability to conduct search and rescue and law enforcement missions. This forecast, categorized under NAICS code 561720, emphasizes the need for superior customer service and the maintenance of high-quality facilities. The project is managed by the Department of Homeland Security, with the incumbent contractor identified as The Corporate Source, INC. Primary points of contact for the procurement include Hector Laguer and Rocco Tramontano.

Janitorial Services

POSTED

about 1 month ago

DEADLINE

DETACHED DUTY RECRUITER CO-WORKING SPACESThe United States Coast Guard is seeking a contractor to identify and secure coworking spaces for recruiters operating in detached locations. This initiative aims to provide professional and private environments for conducting interviews and meetings, which are essential for effective recruitment and the assessment of long-term staffing needs in these areas. The project focuses on ensuring that recruiters have the necessary infrastructure to represent the service professionally while engaging with prospective candidates. The selected contractor will be responsible for evaluating and contracting up to sixteen facilities that meet specific criteria. As part of the deliverables, the contractor must thoroughly document the selection process and provide formal justification for each chosen location. This forecast is associated with NAICS code 531120 and lists EDJJ Solutions, LLC as the incumbent contractor.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

about 2 months ago

DEADLINE

OBS- Galley and Barracks KeepersThe United States Coast Guard is seeking a contractor to provide comprehensive galley and barracks support services across multiple First District locations in Massachusetts, New York, and Maine. The selected provider will supply a project manager and qualified personnel, including cooks, dishwashers, and quarters keepers, to augment existing staff in managing daily mess deck, lodging, and facility operations. Responsibilities for the contractor include full-scale food service management, encompassing menu development, meal preparation, inventory control, and sanitation. Additionally, the contractor will manage barracks maintenance through room turnovers, deep cleaning of restrooms and galleys, laundry services, and general janitorial duties to ensure all facilities remain inspection-ready. All services must be performed by trained personnel meeting strict health, safety, and sanitation requirements in accordance with Coast Guard policies.

Facilities Support Services

POSTED

about 2 months ago

DEADLINE

OBS – Maintenance WorkersThe United States Coast Guard, under the Department of Homeland Security, is seeking a contractor to provide non-personal general maintenance support services across multiple station locations in the Northeast region. The scope of work covers facilities located in Maine, Massachusetts, Rhode Island, Vermont, New York, and New Jersey. The requirement specifies a staffing model consisting of seven general maintenance workers to handle routine station upkeep and one project manager responsible for coordinating staffing, performance, and overall contract support. This opportunity is categorized under NAICS code 561210 and is currently listed as a forecast.

Facilities Support Services

POSTED

about 2 months ago

DEADLINE

USCG ATON Retro-Reflective Letters and NumbersThe United States Coast Guard is seeking a contractor to manufacture and ship retro-reflective letters and numbers for use on ATON buoys and dayboards. These items must be produced in various shapes and sizes, ranging from 6 to 24 inches in height, and available in red, green, and silver/white colors. All products must feature adhesive backing and be manufactured in accordance with WOPL specifications. The completed orders are to be shipped directly to the USCG Yard located in Baltimore, Maryland. This requirement is listed as a forecast under NAICS code 333999, with Orafol Americas identified as the incumbent contractor. Coordination for this effort is managed through the Department of Homeland Security.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 months ago

DEADLINE

Manufacture and Delivery of Steel Foam Filled River BuoysThe United States Coast Guard, under the Department of Homeland Security, is seeking a contractor for the manufacture and delivery of steel foam-filled river buoys. These buoys are critical components of the Waterway Operations Product Line used by Aids to Navigation units to guide mariners through navigable waters, particularly in the Midwest. Due to frequent loss and destruction caused by vessel collisions, extreme weather, and environmental wear, approximately seventy-five percent of these buoys require annual replacement to maintain operational safety. This forecast identifies the place of performance as Perryville, Missouri, under NAICS code 332312. The current incumbent contractor for these services is H&G Marine Services, LLC. Interested parties may coordinate with the designated points of contact, Thomas Porzillo and Small Business Specialist Jackie Dickson, regarding the requirements for this essential maritime infrastructure project.

Fabricated Structural Metal Manufacturing

POSTED

about 2 months ago

DEADLINE

Manufacture and ship Large USCG Chain and Bridles for mooring of buoysThe United States Coast Guard is seeking a contractor to manage the manufacture and delivery of specified buoy chain and bridles. The scope of work includes providing all necessary personnel, labor, materials, and equipment to produce chain diameters ranging from 1 inch to 1-7/8 inches, including 90 foot shots. Additionally, the contractor must supply bridles in various sizes, specifically 1 inch by 12 feet, 1-1/4 inches by 15 feet, and 1-1/2 inches by 18 and 20 feet. The selected contractor will be responsible for the transportation and shipment of these materials to various Coast Guard locations throughout the United States, including Alaska, Hawaii, and Guam. This requirement is categorized under NAICS code 332111 and is currently listed as a forecast for the Department of Homeland Security.

Iron and Steel Forging

POSTED

about 2 months ago

DEADLINE

USCG Manufacture and Ship of Small Buoy Chain 1-1/4" and smallerThe United States Coast Guard, under the Department of Homeland Security, requires a contractor to manage the manufacture and delivery of specified buoy chain in various sizes up to 1-1/4 inch in diameter. The scope of work includes providing all necessary personnel, labor, materials, and specialized equipment to produce chains in diameters of 1/2, 3/4, 1, 1-1/8, and 1-1/4 inches. Available lengths are specified as 90 foot shots or 540 feet for the 1/2 inch diameter chain. The selected contractor will be responsible for shipping the manufactured chain to multiple USCG locations throughout the United States, including Alaska, Hawaii, and Guam. This requirement is categorized under NAICS code 332111 and is currently listed as a forecast. The incumbent contractor for these services is Columbus McKinnon Corp.

Iron and Steel Forging

POSTED

about 2 months ago

DEADLINE

Manufacture of Shackles for use in mooring USCG Aids to Navigation buoysThe United States Coast Guard is seeking a contractor for the manufacture and delivery of various steel shackle assemblies, including 1st through 4th class, Modeer, and special class shackles, along with shackle pins and stainless steel split keys. These components are intended for use in mooring Aids to Navigation buoys. The scope of work encompasses the entire production process, including item design, welding, heat treatment, and rigorous quality control measures such as batch alloying elements, traceability, proof loading, and breaking loading. All items must be manufactured at the contractor's facility and shipped to the USCG Yard in Baltimore, Maryland. This requirement is categorized under NAICS code 332111 and is currently listed as a forecast. The incumbent contractor for these services is CFMW, LLC.

Iron and Steel Forging

POSTED

about 2 months ago

DEADLINE

All-Season Navigational Plastic BuoysThe United States Coast Guard is seeking a contractor to provide the management, personnel, materials, and equipment necessary for the production and transportation of All-Season Navigational Plastic Buoys. This requirement addresses a critical gap in the current inventory, as existing ice buoys cannot support lanterns, resulting in reduced signaling capabilities for mariners during ice seasons. The goal is to implement year-round ice buoys capable of remaining on station through all four seasons while maintaining all essential signal indicators. This forecast is managed by the Department of Homeland Security under NAICS code 326199. While the specific quantity and dimensions are detailed in the Performance Work Statement, the contract involves the delivery of specialized equipment to ensure navigable waterways remain safe during heavy ice conditions. Go-Deep International, Inc. is listed as the incumbent contractor for this effort.

All Other Plastics Product Manufacturing

POSTED

about 2 months ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS