Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on December 21, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

81 -- Joint Standoff Weapon (JSOW) All-Up-Round (AUR) Container

Awarded
N00019-08-R-0029Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

5 days ago

DEADLINE

in 10 days
NAICS: 332993
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 2 days
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize and enhance ammunition manufacturing capabilities. The program focuses on integrating advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile and resilient industrial base. Key objectives include accelerating digital transformation via IoT platforms and advanced analytics, improving supply chain resilience, enhancing workforce capabilities, and promoting sustainable manufacturing practices, all while maintaining strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, the solicitation allows for awards via fixed-price contracts or Other Transaction Agreements. The selection process is phased, beginning with the continuous acceptance of unclassified Phase I white papers and PowerPoint briefings, followed by Phase II pitch sessions, and concluding with detailed Phase III technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Successful efforts are intended for funding in Fiscal Year 2026, with typical periods of performance ranging from two to five years. Large business offerors are required to submit comprehensive subcontracting plans targeting various small business categories.
W6QK Acc-Ri

POSTED

20 days ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

The Naval Air Systems Command is seeking a small business to provide a low cost replacement container for the Joint Standoff Weapon All-Up-Round. This firm fixed price contract includes a base period and four options with an estimated total value of 22 million dollars. The anticipated annual production rate ranges from 300 to 650 containers, and the successful offeror must complete an approved First Article test within 18 months of the award. Selection will be based on a best value approach evaluating technical capabilities, price, and past performance. Due to the sensitive nature of the technology, all offerors must possess a Department of Defense Confidential clearance and comply with strict International Traffic in Arms Regulations and export control laws. Registration in the DOD Central Contractor Registration database is a mandatory prerequisite for receiving an award.

General Info

Contract Value

$12,268,931.41

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

20670, MD, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

9 updates
PhaseAwarded
Posted

Sources Sought

Notice updated

Response deadline changed from Jan 15, 2008 to Jan 29, 2008. The notice description changed.

Notice updated

Response deadline changed from Jan 29, 2008 to Jun 16, 2008. The notice description changed. The point of contact changed.

Notice updated

Response deadline changed from Jun 16, 2008 to Jun 23, 2008. The notice description changed.

Notice updated

Response deadline changed from Jun 23, 2008 to Jun 4, 2009. The notice description changed. The point of contact changed.

Notice updated

The notice description changed. The point of contact changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed. The point of contact changed.

Notice updated

Response deadline changed from Jun 4, 2009 to Jan 9, 2009. Set-aside added: Total Small Business Set-Aside (FAR 19.5). The notice description changed. The point of contact changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Air Systems Command
Contacts2 people available
OfficePATUXENT RIVER, MD, 20670-5000, USA
Office AddressPATUXENT RIVER, MD, 20670-5000, USA
Contacts
Latonya C BembryContract Specialist
Stephen J LucianettiContracting Officer

Full Description

Show more
The Naval Air Systems Command Conventional Strike Weapons Program Office (PMA-201) intends to procure on a Best Value competitive basis a low cost replacement Container for the All-Up-Round (AUR) Joint Standoff Weapon (JSOW). This solicitation has an estimated annual production rate of between 300 and 650 containers per year. Offerors will be required to be qualified in accordance with the First Article Test provided in JSOW AUR Container Performance Specification PMA201-08-001 and Statement of Work for the Container for the JSOW System AGM-154. A Small Business Set-Aside competition will be conducted using the BEST VALUE Source Selection approach to select the most advantageous offer based on both non-price factors as well as price factor. The Government anticipates evaluating the offers based on technical, price related factors and past performance. The Government anticipates award in May 2009 for a firm fixed price contract with a base and four (04) options. The estimated contract value, including all options, is valued to be $22,000,000.00. The Government shall require any potential offeror to have an approved First Article completed eighteen (18) months after contract award. All potential offerors must have a Department of Defense (DOD) Confidential clearance to obtain the classified documents associated with this effort. Companies must officially request classified documents through LaTonya Bembry at: latonya.bembry@navy.mil. This request must include the potential offerors company name, mailing address, current security authorization, point of contact, phone number and CAGE code. The Final RFP may be obtained at the following website: http://www.navair.navy.mil under - Business Opportunities under N00019-08-R-0029 on or about 22 September 2008. Except as noted here, the Government will only release the solicitation/RFP, including any subsequent amendments, over the Internet. No telephone requests for the solicitation will be accepted, no written requests will be accepted and no hard copies will be mailed. After the solicitation release, vendors should regularly access the website to ensure they have all amendments. All proposals will be due by 3:00PM Eastern Standard Time on 15 December 2008. This program includes information that has been designated as - Distribution D and is only releasable to current and approved Department of Defense (DoD) contractors. In addition, the program requires a procurement effort in certain critical technologies/data that are not releasable to foreign firms. Some documents are under Federal export control for - sensitive or - controlled technologies regulated by the U.S. Department of State's International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. As such, the documents contain data whose export/transfer/disclosure is restricted by U.S. law and dissemination to non-U.S. persons whether in the United States or abroad requires an export license or other authorization. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclosure of technical data by U.S. persons to foreign persons as defined under by the U.S. Department of State website. http://pmdtc.org/licenses.htm. To participate in this program, a foreign firm may be required to team with a U.S. firm that possesses a current and valid U.S. facility clearance with technologies/data safeguarding capabilities, inclusive of the authority to receive critical technology and/or data required to execute this program. Any resultant contractor teaming or license agreements between U.S. firms and foreign firms, to include employment of foreign nationals by U.S. firms, shall be in accordance with current U.S. export laws, security requirements, and National Disclosure Policy and shall require the prior approval of the contracting officer and foreign disclosure officer. It is the contractor's responsibility to provide evidence of any such agreement and/or license to this office for review and this shall be verified prior to release of any controlled documents. As such, Attachment (1) Statement of Work for the Container for the JSOW System AGM-154; and Attachment (2) JSOW AUR Container Performance Specification PMA201-08-001 will NOT be posted with the RFP and must be obtained through this office. Interested Firms should request a copy of the Technical Data Package through LaTonya Bembry at: latonya.bembry@navy.mil or Tracy Medford at: tracy.medford@navy.mil. To obtain a copy of these attachments, the written request must be submitted to this office and must include the name of your company, mailing address, phone number, email address (if available), current CAGE number, Central Contractor Registration number and acknowledgement of the contractor's responsibility under the U.S. export contract laws and regulations. For any foreign firm, the request must include proof of a current and applicable approval, authorization, or license under E.O. 12470 or the Arms Export Control Act if applicable. Prior to release of any control document under this solicitation, any U.S. contractor must acknowledge its responsibilities under U.S. export control laws and regulations (including the obligation, under certain circumstances, to obtain an export license prior to the release of technical data within or outside the United States) and agree that it will not disseminate any export-controlled technical data subject to this requirement in a manner that would violate applicable export control laws and regulations. It is the responsibility of the contractor to provide this certification and/or proof of a current approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. Upon verification of your status and acknowledgement, the requested documents will be provided. IMPORTANT INFORMATION: Registration in the DOD Central Contractor Registration (CCR) database will be a prerequisite for receiving an award. For more information on the CCR, refer to the CCR website at http://www.ccr.gov/index.cfm. All responses and questions to this announcement shall be submitted to the following: latonya.bembry@navy.mil or at Naval Air Systems Command, 47123 Buse Road, Bldg 2272, Suite 453, Attn: Mrs. LaTonya Bembry, AIR-2.4.4.3.5, Patuxent River, MD 20670-1547.

More opportunities from Department Of Defense → Naval Air Systems Command

Same awarding agency

NAICS: 541330
New
Federal
PMA-290 Technical and Engineering Services
Solicitation # N0042125RFPREQAPM2900480-2
The Naval Air Warfare Center Aircraft Division and Naval Air Systems Command, supporting PMA-290, intend to award a sole source SAIDIQ contract to Aviation Systems Engineering Company Inc for technical and engineering services for the Maritime Patrol and Reconnaissance Aircraft program, specifically focusing on the P-8A. The scope of work encompasses systems engineering, cybersecurity, program management, software development and integration, and fleet support. Key deliverables include the modernization of existing systems, the development of training materials, and the execution of laboratory, ground, and flight verification at Boeing and Navy test facilities. The contractor is also required to provide warehouse facilities for equipment storage and shipment, as well as aircraft modification facilities near NAS Jacksonville, Florida. Performance is expected to begin in the third quarter of fiscal year 2027, with a critical requirement to relocate existing materials within 30 days of award. Approximately 80 percent of the work will be performed at government sites, including Patuxent River, Maryland; Seattle and Oak Harbor, Washington; and Jacksonville, Florida, with the remaining 20 percent at contractor sites. A significant portion of the workforce must meet Navy Cyber Security Workforce qualifications, with specific certifications such as CCNA Security or CySA required for positions with privileged access. This action is being pursued under the authority of FAR 6.103-5 and DFARS 270.1 to incentivize contracting with employee-owned businesses.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 51321
New
Federal
FortiNet FortiGate Software License Renewals
Solicitation # N00019-26-RFPREQ-APM290-0806
The Naval Air Systems Command (NAVAIR) is soliciting proposals for a Firm Fixed Price, Indefinite Quantity contract to procure FortiNet FortiGate software license renewals and subscriptions. This requirement specifically supports communications security for the P-8A Poseidon aircraft program, benefiting the United States Navy, the Royal Australian Air Force, and several Foreign Military Sales customers, including the United Kingdom, Norway, Republic of Korea, Canada, New Zealand, and Germany. The scope is strictly limited to FortiGuard Antivirus and Intrusion Prevention System subscriptions for FortiGate SX and BX modules, explicitly excluding FortiCare services, hardware support, or remote system access. The contract includes a base year running from February 1, 2027, through January 31, 2028, with four subsequent option years, for a total period of performance ending in January 2030. This is a limited competition open only to vendors listed on the Fortinet Federal Partners list; proposals from non-authorized resellers will not be considered. The acquisition is set aside for small businesses, including HUBZone, SDVOSB, and WOSB entities, with a HUBZone price evaluation preference applied. Award will be granted to the responsible offeror proposing the lowest total price for a minimum of 324 and a maximum of 1,378 units. Proposals must be submitted electronically via DoD Safe to the designated points of contact by October 28, 2026, at 4:00 PM. Invoicing and acceptance will be managed through the Wide Area WorkFlow system, with inspection and acceptance occurring at the destination in Patuxent River, Maryland.

POSTED

1 day ago

DEADLINE

in 8 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS