Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

91 – Fuels, Lubricants, Oils, and Waxes

Active
N0002411SNA46Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Sea Systems Command (NAVSEA) is in the process of drafting updated specifications for lubricating oil specifically designed for steam turbines and gears used in moderate service conditions. The draft document, MIL-PRF-17331K, aims to accommodate various design methodologies and fabrication processes while promoting competition among a diverse range of vendors. Although this announcement is not a solicitation, interested parties can request a copy of the draft specification by emailing [email hidden] and referencing the document number. The review period for this draft ends on October 24, 2011. This effort falls under the broader category of fuels, lubricants, oils, and waxes, associated with NAICS code 324191. Once finalized, the specifications will be made available through the ASSIST Online repository for military standards and specifications. The notice was publicly posted on September 26, 2011, signaling NAVSEA’s commitment to maintaining current standards and encouraging vendor engagement across the defense industrial base. No set-aside or specific agency information is provided in this announcement.

General Info

NAVSEA drafts MIL-PRF-17331K lubricating oil specs for steam turbines, seeking vendor feedback.

Agency

N/A

NAICS

324191 - Petroleum Lubricating Oil and Grease Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyN/A
ContactsNo contacts available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
The Naval Sea Systems Command (NAVSEA) intends to draft specifications and standards to accommodate a variety of design solutions and processes, and to encourage a broad vender base. NAVSEA is preparing draft MIL-PRF-17331K, Lubricating Oil, Steam Turbine and Gear, Moderate Service. Copies of this document may be requested by sending an email to contact@example.gov with the document number in the subject line and a brief message requesting a copy of the document. Please note that the review period ends 10/24/11. Those interested can check ASSIST Online at https://assist.daps.dla.mil/quicksearch/ for final document when it has been completed. THIS IS NOT A SOLICITATION.

Similar Contracts

Same NAICS industry code

NAICS: 324191
New
DIBBS
LUBRICATING OIL, ENGINE
Solicitation # SPE4A6-27-T-6952
Solicitation SPE4A6-27-T-6952, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for the procurement of 36 gallons of engine lubricating oil. The required material is identified by NSN 9150017227982 and corresponds to Deere & Company and James River Equipment Inc part number TY26667. This item is classified as a Commercial Off The Shelf product and does not have a shelf life requirement. The unit of issue is defined as a 5.0 gallon pail. Delivery is set for FOB Destination with a need ship date of February 15, 2027, and an original required delivery date of October 31, 2027. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Because the material is hazardous, the contractor must provide SDS and OSHA hazard warning labels for approval by technical personnel prior to award. Quality assurance will be conducted at the destination using sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding of contractor information systems, and restrictions on covered defense telecommunications.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 324191
New
Federal
9150--Turbine Engine Oil
Solicitation # 36C26227Q0069
The Department of Veterans Affairs is issuing a Sources Sought Notice and Request for Information to identify qualified sources for turbine engine oil equivalent to Castrol Aero J5 (Part# 15AF27). This is not a formal solicitation but a planning effort to conduct market research and determine the appropriate acquisition strategy. The requirement consists of five 55-gallon drums of synthetic-base oil that must cover three classes of gas turbine engine lubricating oils, be intended for aircraft engines with a nominal viscosity of 5 centistokes at 100 degrees Celsius, be identified by NATO Code Number 0-156, and maintain full compatibility with MIL-PRF-23699F approved oils. Interested respondents must submit their capabilities statements and business information via email to the designated contract specialist by November 2, 2026. The government is specifically seeking information regarding business size under NAICS 324191, socioeconomic status such as SDVOSB or VOSB, and compliance with the Buy American Act and the Non-Manufacturer Rule. Responses should include the company's SAM.gov Unique Entity ID, lead times, and any existing federal contract vehicles like GSA or NASA SEWP. While general pricing is encouraged for market research purposes, it will not be used for an award, as this notice does not constitute a binding offer.
262-NETWORK Contract Office 22 (36C262)

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 324191
MARINE GREASE — 9150016517256 — N0010426QFD66
Solicitation # N00104-26-Q-FD66
Solicitation N00104-26-Q-FD66, issued by NAVSUP Weapon Systems Support, is a request for quotations for Marine Grease (NIIN 016517256), specifically Part Number A2283-93 LVP from TRI/Applied Technologies, Inc. Due to its use in crucial shipboard systems, the material is designated as Special Emphasis material (Level I, Scope of Certification, or Quality Assured), requiring strict adherence to toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The material must be mercury-free, physically identified according to MIL-STD-130, and marked with an expiration date. Although the solicitation was issued on April 29, 2026, with a quote deadline of May 14, 2026, a subsequent amendment dated August 27, 2026, officially canceled the solicitation. The procurement process emphasizes past performance as the primary evaluation factor, weighted more heavily than price. Technical requirements include strict configuration control, with any waivers or engineering change proposals requiring approval from the Contracting Officer. Packaging must comply with MIL-STD-2073 and ASTM D3951-18 depending on the shipment destination. Administrative requirements specify the use of the Wide Area Workflow (WAWF) system for invoicing and certification data submission to the Portsmouth Naval Shipyard. Delivery is set as FOB Destination with a final delivery window of 200 days, and constructive acceptance is extended to 45 days after delivery.
Navsup Weapon Systems Support Mech

POSTED

2 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS