This Government Contract opportunity from Department Of Defense was posted on September 30, 2008. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

95--STAIR TREADS

Awarded

W33DL482598701Federal

Submission Closed09/30/2008, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332323

New

Hollow Metal Door and Hardware SupplyThis subcontract opportunity, titled Hollow Metal Door and Hardware Supply, involves providing raw materials and fabrication services for prime contractors working on facility projects at the Atterbury Job Corps Center. The selected vendor will be responsible for the fabrication and delivery of 3'-0" x 7'-0" hollow metal doors, along with the provision of heavy-duty panic hardware, closers, and ADA-compliant thresholds. All delivered materials must be accompanied by the appropriate manufacturer's product warranties. The project is designated as a small business set-aside, welcoming applications from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Managed by Atterbury Job Corps. – Adams & Associates under NAICS code 332323, the solicitation was posted on October 28, 2026, with a response deadline of November 16, 2026.

Atterbury Job Corps. – Adams & Associates

POSTED

DEADLINE

Portable Aluminum Bench SupplierThis subcontract agreement with the Gwinnett County Government involves the supply and delivery of ten portable 8-foot aluminum benches for prime contractors working on Department of Parks and Recreation projects. The benches must be constructed without backs, feature galvanized frames, and strictly adhere to the specifications outlined in The Park and Facilities Catalog Item #569-1386-2. To qualify for the contract, the supplier must provide three professional references and maintain Commercial General Liability insurance. The selected vendor is responsible for the delivery of all ten units to the designated project location. The response deadline for this opportunity is November 6, 2026.

Gwinnett County Government

POSTED

DEADLINE

Portable Aluminum Bleacher SupplierThis subcontract agreement with the Gwinnett County Government involves the supply and delivery of four 15-foot, 3-row portable tip-and-roll aluminum bleachers. The equipment must strictly adhere to the specifications outlined in The Park and Facilities Catalog Item #569-1310-4 and be delivered to designated locations for prime contractors working on Department of Parks and Recreation projects. To qualify for the contract, the supplier must provide three professional references and maintain valid Commercial General Liability insurance. The solicitation was posted on October 28, 2026, with a response deadline set for November 6, 2026.

Gwinnett County Government

POSTED

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0350

Solicitation SPE8E8-27-T-0350 is a procurement request by the DLA Distribution San Joaquin for 37 electrical immersion heating elements, identified by NSN 4520-01-530-8693. The contract specifies a delivery timeframe of 167 days after order, with a need ship date of April 26, 2027. Performance is based on FOB Origin terms, while inspection and acceptance will occur at the destination in Tracy, California. The procurement incorporates technical and quality requirements from the DLA Master List, and requires compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS regulations regarding the Berry Amendment, Buy American Act, and cybersecurity reporting under DFARS 252.204-7012. Offerors must submit quotes through the DLA Internet Bid Board System and provide necessary small business representations. The contract is managed by Alexis Selby at DLA Troop Support, Construction and Equipment.

POSTED

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0367

This solicitation, issued by DLA Troop Support Construction and Equipment, is a Request for Quotations for the procurement of 24 electrical immersion-type heating elements, identified by NSN 4520-01-597-3589. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332323. Delivery is required within 167 days after order, with the place of performance and delivery located at DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements under RP001. Technical and quality requirements are governed by the DLA Master List (RA001), and the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding the safeguarding of covered defense information and the prohibition of certain telecommunications equipment. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026.

POSTED

DEADLINE

HEATING ELEMENT, ELECTR

Solicitation # SPE8E8-27-T-0352

This fixed-price solicitation, issued by DLA Troop Support Construction and Equipment, is for the procurement of three non-immersion electrical heating elements identified by NSN 4520-01-530-8694. The contract is designated as a HUBZone set-aside under NAICS code 332323. Delivery is required within 167 days after receipt of order, with a specified need ship date of April 26, 2027, and a final required delivery date of May 26, 2027. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA packaging requirements RP001 and the DLA Master List of Technical and Quality Requirements taking precedence. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and stringent cybersecurity requirements such as DFARS 252.204-7012 for safeguarding covered defense information. Offerors are encouraged to submit quantity ranges via DIBBS and must provide full data packages if proposing alternate parts.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Tapered Aluminum Street Light Pole SupplierThis subcontract agreement establishes the supply of seamless, tapered aluminum street light poles for prime contractors working on Pierce County Planning and Public Works projects. The scope of work includes the fabrication of one-piece tubes using Aluminum Alloy 6063-T6, heat-treating shafts to T6 temper, and manufacturing cast socket base flanges from Alloy 356. All products must adhere to AASHTO LRFD-LTS-1 standards to withstand ultimate wind speeds of 115 mph. The supplier is responsible for delivering finished poles in lengths of 35 and 40 feet on a FOB Destination basis. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 13, 2026.

Planning and Public Works

POSTED

DEADLINE

GDOT-Certified Guardrail Material SupplyThis subcontract opportunity with the City of Fairburn requires a GDOT certified supplier to provide new and unused guardrail and anchorage materials for prime contractors. The scope of work includes the sourcing and delivery of Type T and Type W guardrail components, as well as TP T1 and TP T2A anchorage, to designated project sites or storage yards. All provided materials must be certified and strictly adhere to GDOT Standard Specifications. The solicitation was posted on October 28, 2026, with a response deadline of December 7, 2026. This procurement falls under NAICS code 332323 and is specifically intended for the supply of critical infrastructure materials to support municipal projects within the state of Georgia.

POSTED

DEADLINE

CMP Pipe SupplyThis subcontract agreement involves the supply of Corrugated Metal Pipe for prime contractors working on projects managed by the Henry County Board of Commissioners in Georgia. The scope of work requires the furnishing and delivery of 208 total linear feet of 36-inch and 42-inch pipe to various project sites within Henry County, ensuring all materials meet GDOT specifications. The opportunity was posted on October 28, 2026, with a response deadline set for November 25, 2026. Classified under NAICS code 332323, this contract focuses specifically on the procurement and logistical delivery of specified piping materials to support local infrastructure development.

Henry County Board of Commissioners

POSTED

DEADLINE

Custom Steel Security Gate FabricationThis subcontract for Custom Steel Security Gate Fabrication involves the production and delivery of two powder-coated steel double swing gates for Valley Center Pauma USD facility projects. Each gate must measure approximately 18 feet wide by 5 feet tall. The project strictly prohibits the use of chain link materials and requires full compliance with California Air Resources Board standards. The selected subcontractor is responsible for the complete fabrication and delivery of the finished gates to the project site in Valley Center, California. This opportunity is categorized under NAICS code 332323 and is intended for prime contractors managing the district's facility improvements.

Valley Center Pauma USD

POSTED

DEADLINE

Supply of Ameristar Impasse Trident (or Equal) Fencing ComponentsThis subcontract, issued by the Department of Veterans Affairs Network Contract Office 01, requires the supply of high-security fencing materials for projects at the VA Boston Healthcare System. The scope of work involves providing Ameristar Impasse Trident components or approved equivalents, specifically including fence panels, posts, brackets, rails, and fasteners. All materials must feature corrosion-resistant and tamper-resistant hardware, and outdoor steel components must have protective coatings that match existing finishes. The selected provider is responsible for delivering these materials to the Brockton VA Campus and providing all necessary manufacturer product documentation and warranties. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332323. Interested parties must submit their responses by November 5, 2026, at 3:00 PM. The contract focuses on ensuring the security and durability of the facility's perimeter through the procurement of specialized, high-grade fencing hardware.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Custom Schedule 40 Steel Gate FabricationThis subcontract involves the fabrication of four custom steel barrier access gates for prime contractors working on City of Victorville park projects. The gates must be constructed using Schedule 40 steel pipe with structural framing, bracing, and supports designed to minimize deflection. Each unit requires a yellow protective industrial coating and the integration of all necessary hinges, stops, brackets, and locking provisions. The project mandates strict compliance with the Build America, Buy America Act. Interested parties must submit their responses by December 3, 2026, for this fabrication effort categorized under NAICS code 332323. The final deliverable consists of four fully fabricated steel gates meeting all specified structural and coating requirements.

City of Victorville

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

Solicitation W33DL482598701 is an invitation for bids issued by the Department of Defense for the procurement of aluminum safety stair treads for various buildings at Fort Stewart, Georgia. This requirement is designated as a small business set-aside under NAICS code 332323. The contract specifies the delivery of non-slip stair treads, specifically Amstep Series 500 part number 509-ASR or an approved equal, to be delivered FOB Destination to Fort Stewart. The required treads must feature a 9/32 inch thick extruded aluminum alloy 6063-T6 base with a carborundum and aluminum oxide abrasive filler. Each tread must measure 9 inches deep by 30 inches wide, be black in color with a yellow sightline, and include a no-trip bevel and a 1 and 1/8 inch tread nose. The award includes multiple line items for various building numbers, and the successful contractor must provide all necessary hardware for installation on concrete surfaces per manufacturer recommendations.

General Info

Agency

Department Of Defense → W6QM Micc-Ft Stewart

Contract Value

$275,931

NAICS

332323 - Ornamental and Architectural Metal Work Manufacturing

Place of Performance

GA, USA

Set-Aside

NONE

Awardee

CONTINENTAL FLOORING CO

Award Issued Date

09/29/2008, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseAwarded

PostedSep 19

Combined Synopsis

Notice updatedSep 25

The notice description changed.

AwardedSep 29

Contract was awarded

Submission Closed

09/30/2008, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Stewart

ContactsNo contacts available

OfficeFORT STEWART, GA, 31314-3324, USA

Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Stewart

Office AddressFORT STEWART, GA, 31314-3324, USA

ContactsNo contact information available

Full Description

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W33DL482598701 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-26. The associated North American Industrial Classification System (NAICS) code for this procurement is 332323 with a small business size standard of 500 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-09-25 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Stewart, GA 31314 The USA ACA Ft. Stewart requires the following items, Brand Name or Equal, to the following: LI 001, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 212, 267, EA; LI 002, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 213, 267, EA; LI 003, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 215, 199, EA; LI 004, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 216, 199, EA; LI 005, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 218, 199, EA; LI 006, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 501, 267, EA; LI 007, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 503, 199, EA; LI 008, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 504, 199, EA; LI 009, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 514, 267, EA; LI 010, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 515, 199, EA; LI 011, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 516, 199, EA; LI 012, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 517, 263, EA; LI 013, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 518, 199, EA; LI 014, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 629, 267, EA; LI 015, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 630, 199, EA; LI 016, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 631, 199, EA; LI 017, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 632, 263, EA; LI 018, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 633, 267, EA; LI 019, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 634, 199, EA; LI 020, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 635, 263, EA; LI 021, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 636, 199, EA; LI 022, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 637, 199, EA; LI 023, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 712, 267, EA; LI 024, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 713, 199, EA; LI 025, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 714, 263, EA; LI 026, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided per manufacturer's recommendation. Safety tread shall be black in color with a yellow sightline. Tread dimensions are 9 inches deep by 30 inches wide. Amstep, Series 500, Amstep part number 509-ASR or equal. For building number 715, 199, EA; LI 027, Stair treads, aluminum, safety, non-slip surface. Tread base 9/32 inches thick extruded alumimun alloy 6063-T6, heat treated for high strength. Abrasive filler material shall be a blend of carborundum and aluminum oxide, bonded and locked into channels provided in the extruded aluminum base. Tread nose shall be 1 and 1/8 inches from underside of tread base with an 83 degree hug tight angle. Back edge of tread shall have a no-trip bevel. Tread shall be drilled and counter sunk for proper installation. All related hardware for proper installation on concrete stair treads shall be provided p -- Please refer to FedBid for complete list of contract requirement(s) and terms and conditions.