This synopsis is being posted to both the Federal Business Opportunities (FBO) page located at http://www.eps.gov, http://www.fedbizopps.gov and the Navy Electronic Commerce on Line (NECO) site located at http://www.neco.navy.mil. While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the Internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by the NSWC Crane Division. Offerors are encouraged to access information also available on the NSWC Crane Division Web site at http://www.crane.navy.mil/supply/homepage.htm. The Naval Surface Warfare Center has a requirement for MK-82 Miscellaneous Parts. These parts will be fabricated by Machine Shops from aluminum, AL alloy, and stainless steel utilizing specification control drawings. NSWC Crane has not procured these parts previously. The OEM, General Dynamics Armament Systems has repaired the MK-82 in the past. Description of items are as follows: Retainer, Heater (P/N 5974804) - Aluminum fabrication with external heater channel and internal seal surface. Sealed Anodic coating per MIL-A-8625, Class I. Intended use is for MK-82 director to allow airflow within supper elevation assemble while maintaining minimal air leakage. Painting and marking not required. For detailed drawing please see spec control drawing 5974804. Quantity Min 15 Each, Max 150 Each Retainer, Heater (P/N 5974805) - Aluminum fabrication with external heater channel and internal seal surface. Sealed Anodic coating per MIL-A-8625, Class I. Intended use is for MK-82 director to allow airflow within upper elevation assemble while maintaining minimal air leakage. Painting and marking not required. For detailed drawing see spec control drawing 5974805. Quantity Min 15 Each, Max 150 Each Hub, Air Duct (P/N 6259562) - Aluminum fabrication and external seal surfaces. Intended use is for MK-82 director to allow airflow within upper elevation assemble while maintaining minimal air leakage. External seal surface application of Teflon (item 4) not required, painting and marking not required. For detailed drawing please see spec control drawing 6259562. Quantity Min 30 Each, Max 300 Each Support Heater (P/N 2907999) - AL Alloy TEE bent to radius of 21.78 degrees, anodic coating per MIL-A-8625. Intended use is for MK-82 director to support and protect train base heater. For detailed drawing please see spec control drawing 2907999. Painting and marking not required. Quantity Min 15 Each, Max 150 Each Support Heater (P/N 2907592) AL Alloy TEE bent to radius of 21.78 degrees, anodic coating per MIL-A-8625. Intended use is for MK-82 director to support and protect train base heater. For detailed drawing please see spec control drawing 2907592. Painting and marking not required. Quantity Min 15 Each, Max 150 Each Guard Assembly (P/N 6736830-1) - Aluminum fabrication with quick catch clamp and strike. Intended use is for MK-82 director to prevent water intrusion of train bearing, part of ORDALT 20335. For detailed drawing please see spec control drawing 6736830 and parts list 6736830-1. Painting and marking not required. Quantity Min 15 Each, Max 150 Each Guard Assembly (P/N 6736830-2) - Aluminum fabrication with quick catch clamp and strike. Intended use is for MK-82 director to prevent water intrusion of train bearing, part of ORDALT 20335. For detailed drawing please see spec control drawing 6736830 and parts list 6736830-2. Painting and marking not required. Quantity Min 15 Each, Max 150 Each Adapter Guard (P/N 6736828-1) - Stainless Steel fabrication with milled channel and hard anodize per drawing. Intended use is for MK-82 director to secure guard assembly and prevent water intrusion of train bearing, part of ORDALT 20335. For detailed drawing please see spec control drawing 673828 and parts list 6736828-1. Painting and marking not required. Quantity Min 45 Each, Max 150 Each Adapter Guard (P/N 6736828-2) - Stainless Steel fabrication with milled channel and hard anodize per drawing. Intended use is for MK-82 director to secure guard assembly and prevent water intrusion of train bearing, part of ORDALT 20335. For detailed drawing please see spec control drawing 6736828 and parts list 6736828-2. Painting and marking not required. Quantity Min 15 Each, Max 150 Each This requirement is anticipated to result in a firm fixed price, indefinite delivery indefinite quantity contract for a period of five-years with a minimum order quantity and maximum ordering quantity as specified above. Delivery will be FOB Destination, NSWC Crane Division, Crane, Indiana 47522, as specified in the RFP. Inspection and acceptance will be at destination by NSWC Crane personnel. THIS IS 100% SET ASIDE FOR SMALL BUSINESS. DRAWINGS WILL BE AVAILABLE WHEN RFP IS ISSUED. Solicitation N00164-06-R-8978 will be issued competitively. The solicitation will be available on or about 26 June 2006 at the following address: http://www.crane.navy.mil.supply/ announce.htm. Estimated closing date is on or about 10 July 2006. No hard copies of the solicitation will be mailed. Offers must be submitted in the format specified in the solicitation to be considered. Submitting a bid from the NECO web site by clicking on the - Submit Bid does not guarantee offers will be received by the proper person in the correct format. It is the responsibility of offerors to download the RFP and to submit offers to the Point of Contact (POC) at NSWC Crane. The POC is Ms. Kelly Anderson, Code 0565ZD at
+1 (555) 000-0000, e-mail
contact@example.gov. All responsible sources may submit an offer, which shall be considered by this agency. FSC 9999; NAICS 332710 Contracting Office: N00164 300 Highway 361, Building 3168, Crane IN LINK: http://www.crane.navy.mil/supply/homepage.htm EMAIL:
contact@example.gov
