99--Acquisition of Peak Power Sensor

The Federal Aviation Administration (FAA) has a requirement for the acquisition of fifty-three (53) Peak Power Sensors, part number 57318, NSN 6625-01-496-1715, from Boonton Electronics Corporation, Parsippany, NJ. Boonton Electronics is the original manufacturer and only know source for these sensors. These sensors are used in conjunction with peak power meters previously procured from Boonton using a full and open competitive acquisition. These sensors and meters are required for on-site maintenance, fault, isolation, and system certification of the Airport Surveillance Radar-11. The FAA does not have specifications or drawings. The contractor must have access to the original equipment manufacturer's (OEM) specifications and drawings. Potentital sources must provide documentation to the FAA showing proof of rights to use the data from the OEM. Statements that data will be obtained or that specifications or drawings will be developed are not acceptable. Only those responses providing the required documentation in response to this market survey will be considered prior to further action by the FAA. Mark responses to this market survey with Market Survey File 0462047, to arrive by June 15, 2004. Facsimile responses are permitted at +1 (555) 000-0000. Email responses are permitted at contact@example.gov. The FAA will not pay for any information received or costs incurred in preparing responses to this market survey. Any proprietary information should be so marked. This market survey shall not be construed as a request for proposal or as an obligation on the part of the FAA to acquire these items. Responders to this market survey may be asked to provide additional details/information based on their initial submittal.