Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

A3 Test Stand Calibration

Awarded
W911RQ-17-Q-0001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Red River Army Depot in Texarkana, Texas, plans to award a sole source commercial purchase order for the annual calibration and alignment service of the A3 Bradley Test Stand. This contract will be awarded exclusively to Tooling Technologies Inc., as they hold the proprietary data rights necessary to perform the required service. The procurement is justified under the statutory authority of 10 U.S.C. 2304(c)(1) and FAR Sub-Part 13.501(a), allowing for other than full and open competition due to the sole source nature of the requirement. The solicitation, identified as W911RQ-17-Q-0001, was set to be released around July 20, 2017, and close approximately on July 24, 2017, with the FOB point designated as Red River Army Depot. The closing date for the solicitation is tentative and subject to adjustment based on the actual release date. The synopsis provided is informational and does not bind the Government. Interested parties or those seeking the solicitation document can contact the purchasing agent, Aeron P. Miller, via email for further details.

General Info

Red River Army Depot awards sole source contract to Tooling Technologies for A3 Bradley calibration.

Contract Value

$79,145.6

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TX, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Presolicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Rrad
Contacts1 person available
OfficeTEXARKANA, TX, 75507-5000, USA
Office AddressTEXARKANA, TX, 75507-5000, USA
Contacts
Aeron P. MillerPurchasing Agent

Full Description

Show more
Red River Army Depot (RRAD), Texarkana, TX, intends to award a sole source commercial purchase order for Yearly Calibration/Alignment Service for the A3 Bradley Test Stand. Negotiations to be conducted solely with Tooling Technologies Inc. as the only company with the proprietary data rights capable of performing the required service. The Statutory Authority permitting Other than Full and Open Competition for this action is 10 U.S.C. 2304(c)(1) as implemented in FAR Sub-Part 13.501(a) "Sole Source". This requirement will be procured on a sole source basis, solicitation W911RQ-17-Q-0001 will be released on or about 20 July 2017 and close on or about 24 July 2017. The FOB Point is Red River Army Depot (Destination). The annotated closing date for the solicitation is an estimated date and may be adjusted dependent upon the release of the solicitation. The solicitation will not close prior to the annotated closing date. This synopsis shall not bind the Government and is for informational purposes only. For a copy of the solicitation or questions, email Aeron Miller at contact@example.gov.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QK Acc Rrad

Same awarding agency

NAICS: 333332
Federal
Industrial 3D Printer Supply – Vector Spartan III or EquivalentThe contract entails the supply of a commercial off-the-shelf industrial 3D printer, specifically the Vector Spartan III or an equivalent model, intended for defense or industrial applications. The equipment must meet the technical and performance standards required for high-reliability environments, ensuring compatibility with mission-critical workflows under demanding operational conditions. The procurement is structured as a subcontract under the Department of Defense, with the agency designation W6QK Acc Rrad, and the place of performance is designated as Texarkana. The North American Industry Classification System code 333332 identifies the primary sector as industrial machinery manufacturing, underscoring the specialized nature of the hardware being procured. The solicitation was posted on May 7, 2026, and while no set-aside designation or specific sourcing restrictions are noted, the contract does not include detailed point of contact information or complete geographic details beyond the city of performance. The equipment must be readily available as a commercial product with proven field performance and without requirement for custom modifications, emphasizing efficiency and rapid deployment. The contract supports broader defense industrial base objectives by securing advanced additive manufacturing capabilities for in-house prototyping, tooling, or spare parts production within regulated operational settings.

POSTED

6 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS