Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aboveground Storage Tank (AST) Integrity & Secondary Containment Testing

Active

State & Local

Response Deadline09/03/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive structural integrity assessments, secondary containment inspections, and overfill prevention system testing for aboveground storage tanks at Omnitrans facilities, ensuring compliance with SB 989 and applicable fire code regulations. All work must be performed to verify tank safety and environmental protection standards, with scope focused on preventing spills and maintaining regulatory adherence across all designated sites. The procurement is structured as a subcontract under NAICS code 541620, indicating specialized engineering or technical services related to environmental and structural evaluation. The solicitation was posted on August 3, 2026, and responses are due by September 3, 2026, at 10:00 PM. The contract is managed by the Procurement Department of OmniTrans in California, with no specific location details provided for performance, implying work may occur at multiple Omnitrans facilities within the state. There is no set-aside designation indicated, and while the point of contact is not listed, bidders must submit proposals through the provided online portal link by the deadline to be considered.

General Info

Structural assessments, containment inspections, and overfill testing for Omnitrans tanks to comply with SB 989 and fire codes.

Agency

California → Procurement Department of OmniTransView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

CA, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 10:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Procurement Department of OmniTrans

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Procurement Department of OmniTrans

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct structural integrity assessments, secondary containment inspections, and overfill prevention system testing for ASTs at Omnitrans facilities per SB 989 and fire code requirements.

Similar Contracts

Same NAICS industry code

Catch Basin Inspection ServicesThe City of San Buenaventura is seeking a contractor to perform visual inspections of approximately 2,150 catch basins up to twice per year to assess the need for cleaning. Each inspection requires detailed photo documentation and digital logging to record the condition of the basins, ensuring accurate and traceable data for maintenance planning. The work must be conducted in Ventura, California, with a zip code of 93001, and the contractor is expected to adhere to the specified documentation protocols to support ongoing infrastructure management. This subcontract opportunity is classified under NAICS code 541620 and has a response deadline of August 25, 2026. All bids must be submitted through the designated online portal before the deadline to be considered.

City of San Buenaventura

POSTED

about 11 hours ago

DEADLINE

Temporary Erosion and Water Pollution ControlThe contract pertains to the development and implementation of a Temporary Erosion and Water Pollution Control plan for a project located in Novato, California, with a ZIP code of 94945. The scope of work includes designing and executing an Erosion and Sediment Control Plan to mitigate soil erosion and prevent sediment runoff into waterways, along with the physical installation of silt fences, sediment basins, and storm drain protections. Regular inspections are required to ensure compliance with environmental standards and the effectiveness of installed measures throughout the project duration. This subcontract is classified under NAICS code 541620, indicating it falls within the environmental consulting services category, and is managed by the City of Novato under the state of California. All work must be performed at the specified place of performance in Novato, and responses are due by August 18, 2026, with the solicitation posted on August 4, 2026.

POSTED

about 11 hours ago

DEADLINE

Environmental Remediation and MonitoringThe contract titled Environmental Remediation and Monitoring requires comprehensive soil and water testing, contamination assessment, and ongoing compliance monitoring throughout the duration of construction activities in Hayward, California, specifically in the 94544 zip code. The work involves identifying environmental hazards, evaluating the extent of contamination, and ensuring all remediation efforts adhere to regulatory standards during development. The subcontract is governed under NAICS code 541620, reflecting its focus on environmental consulting services, and is issued by the City of Hayward under the California jurisdiction. All responses must be submitted by September 1, 2026, by 9:00 PM, with performance expected to align with local and state environmental regulations. The project demands technical expertise in environmental science and engineering, with continuous reporting and documentation to maintain compliance and support informed decision-making during construction.

City of Hayward

POSTED

about 11 hours ago

DEADLINE

Traffic Control and Signage ManagementThe contract pertains to the installation and maintenance of temporary traffic control systems including signage, cones, and flagging operations necessary for road repair activities within the City of Compton. All work must be conducted in accordance with specified safety standards and local regulations to ensure the safe movement of vehicles and pedestrians during construction. The performance location is restricted to Compton, California, with a zip code of 90220, and the contractor will be responsible for deploying, monitoring, and removing all temporary traffic control devices throughout the duration of the project. This is a subcontract under NAICS code 541620, indicating professional, scientific, and technical services related to management and administrative support for traffic control operations. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, at 5:00 PM. The contracting agency is the City of Compton Department of Public Works, and while no set-aside provisions are specified, the work is expected to require experienced personnel trained in traffic management and safety compliance. All activities must be completed within the designated performance area and align with the public works department’s operational guidelines.

City of Compton Department of Public Works

POSTED

about 11 hours ago

DEADLINE

Environmental Compliance and MonitoringThis contract outlines the responsibilities for environmental compliance and monitoring during construction, with a primary focus on stormwater management, erosion control measures, and ongoing regulatory adherence. The work is intended to ensure that all construction activities comply with environmental regulations to prevent pollution and protect surrounding ecosystems, requiring continuous observation, documentation, and reporting to meet federal and state standards. The services will be performed at a designated location with a ZIP code of 14608, and the contractor must have the expertise to implement and maintain best practices for site-specific environmental protection throughout the project lifecycle. The contract is classified as a subcontract under a Small Business Set Aside - Total designation, meaning only qualified small businesses are eligible to bid, and it falls under NAICS code 541620, which pertains to environmental consulting services. The solicitation was posted on August 4, 2026, with responses due by September 4, 2026, at 6:00 PM. Although the contracting agency is listed as Community Treatment Services - Co, the overseeing department is the Department of Justice, indicating a potential alignment with federal environmental enforcement or facility development initiatives. The place of performance location is specified only by ZIP code, and no point of contact details have been provided in the posting.

Community Treatment Services - Co

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Environmental Compliance and MonitoringThe contract outlines a subcontract for environmental compliance and monitoring services during construction activities in Pomona, California, specifically focused on stormwater management, erosion control inspections, and regulatory reporting. The work is governed under NAICS code 541620, indicating environmental consulting services, and requires the contractor to ensure adherence to applicable environmental regulations throughout the construction phase. Routine inspections must be conducted to validate the effectiveness of erosion and sediment control measures, with detailed documentation and timely reporting submitted to meet compliance obligations. Performance of all services is geographically restricted to Pomona, with the zip code 91766 designated as the place of performance. The contract was posted on August 4, 2026, and responses are due by 10:00 PM on August 13, 2026. Although no solicitation number or point of contact is provided, the procurement is structured as a subcontract, suggesting it supports a larger project managed by the City of Pomona. Contractors must be prepared to deliver consistent field monitoring, accurate regulatory documentation, and proactive compliance adjustments to mitigate environmental risks during construction.

POSTED

about 13 hours ago

DEADLINE

Environmental Compliance and MonitoringThe contract pertains to environmental compliance and monitoring services specifically focused on stormwater management, erosion control, and regulatory adherence during construction activities within the City of Eastvale, California, with a place of performance at ZIP code 91752. The work requires ongoing surveillance and implementation of measures to prevent sediment runoff, protect local waterways, and ensure all federal, state, and local environmental regulations are consistently followed throughout the project lifecycle. This subcontract is classified under NAICS code 541620, indicating a focus on environmental consulting services, and demands expertise in real-time monitoring, documentation, reporting, and coordination with regulatory agencies to maintain compliance. The solicitation was posted on August 4, 2026, with a formal response deadline of August 13, 2026, at 9:00 PM Pacific Time, allowing interested parties a limited window to submit proposals. The contracting entity is the City of Eastvale, operating under the state of California, and the contract is issued as a subcontract, meaning the selected provider will work under a prime contractor or broader project umbrella. While specific deliverables are not detailed here, the scope implies the need for site-specific plans, inspections, maintenance of best management practices, and prompt response to non-compliance issues. Contractors must be prepared to operate within a regulated urban construction environment and demonstrate proven experience in local environmental standards and permitting requirements.

City of Eastvale

POSTED

about 14 hours ago

DEADLINE

Chevron Products Company Change in Throughput and TVP Limits for S-1296 (Air District Application 31458)Chevron Products Company has requested approval to modify the operation of Storage Tank S-1296 at its Richmond facility, seeking to increase annual throughput from 3.495 million barrels to 7.6 million barrels while reducing the true vapor pressure of the stored materials from 4.1 psia to 3.9 psia. The tank, an external floating roof storage unit with a capacity of 6,733 thousand gallons or 160,310 barrels and physical dimensions of 160 feet in diameter and 48 feet in height, currently holds FCC Light, FCC Heavy, Light Poly, NHT Feed, GHT Product, and FCC Sidecut Gasoline. The proposed changes aim to optimize operational efficiency while maintaining environmental compliance through lower vapor pressure, which reduces emissions. The permit action is managed by the Bay Area Air Quality Management District under Application 31458, with Nimrat Sandhu listed as the primary point of contact for air quality review and Laurie Mintzer representing Chevron’s environmental team. The forecast notice was posted on August 4, 2026, indicating upcoming regulatory review and public engagement.

Bay Area Air Quality Management District

POSTED

about 17 hours ago

DEADLINE

California Vegetation Treatment Program (CalVTP) Update

Solicitation # 2019012052

The California Department of Parks and Recreation is implementing vegetation treatments and habitat enhancement across approximately 11,994.7 acres in Big Basin Redwoods State Park and other adjacent lands in Santa Cruz and San Mateo Counties under the California Vegetation Treatment Program (CalVTP) Program Environmental Impact Report (SCH# 2019012052). This effort includes ecological restoration activities such as prescribed burning, mechanical and manual thinning, and targeted herbicide applications aimed at reducing wildfire risks, improving forest health, and restoring natural ecosystem processes in old-growth coast redwood and shrubland areas. A specific grant from the Coastal Conservancy supports the Sempervirens Fund’s work on 215 acres within the old-growth redwood zone of Big Basin Redwood State Park, focusing on wildfire resilience through targeted treatment. The project is governed by the California Environmental Quality Act (CEQA), with a Project-Specific Analysis and Addendum approved to ensure alignment with the CalVTP PEIR, including compliance with mitigation monitoring and reporting requirements. No formal federal contract clauses or acquisition structures such as CLINs, pricing, or award criteria are present; instead, the framework is rooted in environmental compliance and grant-funded execution. Activities occur on state park lands with oversight by California State Parks personnel, including the District Superintendent and Senior Environmental Scientist, though no formal Contracting Officer’s Representative or Procurement Contracting Officer is designated. Performance occurs across multiple locations including the inland and eastern portions of Big Basin, the Forest of Nisene Marks, and coastal stretches near Pescadero and Davenport. All deliverables are tied to ecological outcomes rather than commercial deliveries, and no financial values, invoicing methods, accounting codes, or procurement types such as FFP or IDIQ are specified in the documentation.

California Parks and Recreation, Department of

POSTED

about 17 hours ago

DEADLINE

Applications and Environmental Support Services

Solicitation # WS5819275303

The Department of National Defence requires Applications and Environmental Support Services under Supply Arrangement # TBIPS SA EN578-170432, with solicitation number WS5819275303. All bids must be submitted by 14:00 EDT on 19 August 2026, overriding any previously listed deadlines on SAP Business Network or CanadaBuys; submissions after this time will be deemed non-responsive. Only holders of the specified Supply Arrangement are eligible to compete, though uninvited holders may request an invitation up to five business days before the closing date, provided it does not disrupt procurement efficiency. Interested parties not currently qualified must first obtain qualification for Supply Arrangement EN578-170432 before bidding, and no extensions will be granted for qualification or proposal submission. The solicitation is open to the federal government, targeting performance within the National Capital Region, and the Request for Supply Arrangement can be accessed through Canada.ca. Primary point of contact is Shannon Banks, Contracting Authority, reachable at shannon.banks@tpsgc-pwgsc.gc.ca.

Department of Public Works and Government Services

POSTED

about 19 hours ago

DEADLINE

SWPPP ServicesRanger Pipelines Incorporated is seeking a subcontractor to develop, conduct inspections, and perform compliance monitoring for a Stormwater Pollution Prevention Plan (SWPPP) associated with a construction project. The scope of work centers on ensuring adherence to environmental regulations during all phases of construction, including the preparation of a comprehensive SWPPP, routine site inspections to identify and mitigate potential stormwater contamination, and ongoing monitoring to maintain regulatory compliance. The contract is designated as a small business set-aside under SBA programs, open to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The NAICS code 541620 indicates the work falls under environmental consulting services. The solicitation was posted on August 4, 2026, with responses due by August 8, 2026, and the place of performance is not specified beyond the broader context of the project, which is linked to the City of Williams Wastewater Collection System Improvement Project. Interested parties must respond through the provided SBA opportunity portal.

Ranger Pipelines Incorporated

POSTED

about 20 hours ago

DEADLINE

Integrated Pest Management (IPM) Planning & ReportingThe contract encompasses the development and ongoing maintenance of an Integrated Pest Management (IPM) plan tailored to federal compliance standards, requiring detailed documentation of pest activity, treatment histories, and chemical usage reports. Quarterly compliance summaries must be prepared to ensure sustained audit readiness, with all records structured to meet federal oversight requirements. The scope is focused on delivering a proactive, science-based pest control strategy that minimizes environmental impact while adhering to regulatory guidelines. This subcontract is set aside exclusively for small businesses and designated socio-economic categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The NAICS code 541620 designates it under Environmental Consulting Services, and the performance is tied to the ETR/Excelsior Springs Job Corps facility. Responses are due by August 14, 2026, with no specified place of performance or point of contact listed, and the opportunity is publicly accessible through the SBA’s opportunity portal.

ETR/Excelsior Springs Job Corps

POSTED

about 20 hours ago

DEADLINE

More opportunities from California → Procurement Department of OmniTrans

Same awarding agency

Specialized Testing Equipment & Calibration ServicesThe contract is for the supply, maintenance, and calibration of specialized diagnostic equipment used in the testing of underground and aboveground storage tanks, including leak detection sensors, tank gauges, and cathodic protection meters. This subcontract requires ongoing support to ensure all tools remain accurate, functional, and compliant with regulatory standards, with services to be performed as needed across unspecified locations within California. The procurement is managed by the Procurement Department of OmniTrans under NAICS code 423490, which relates to wholesale trade of motor vehicle supplies and new parts, though the actual scope focuses on environmental testing equipment services. Bids are due by September 3, 2026, at 10:00 PM Pacific Time, and the opportunity is open to qualified vendors without set-aside restrictions. All work must align with industry best practices for equipment reliability and data integrity in fuel system monitoring.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Emergency Response & On-Call Spill Mitigation ServicesThe contract seeks a vendor to provide 24/7 emergency response services specifically for fuel leaks, overfills, and system failures occurring at OmniTrans facilities. The scope includes immediate spill containment, isolation of affected fuel systems, and urgent repairs to restore operational integrity. Response teams must be equipped and ready to act at any time, ensuring environmental safety and compliance with regulatory standards during all phases of incident management. Services are expected to be delivered across all OmniTrans operational locations without delay, with an emphasis on rapid mitigation and minimal disruption to transit services. The contract is classified as a subcontract under NAICS code 562910, indicating it falls within the environmental remediation services category. It was posted on August 3, 2026, with a mandatory response deadline of September 3, 2026, at 10:00 PM. The Procurement Department of OmniTrans, based in California, is the issuing entity, and all work must be performed at OmniTrans facilities, though specific locations are not detailed. The vendor will be responsible for meeting all technical, safety, and timing requirements outlined in the solicitation, and no set-aside provisions are listed, making the opportunity open to all qualified subcontractors.

Remediation Services

POSTED

DEADLINE

Environmental Compliance Reporting & DocumentationThe contract requires the preparation and submission of comprehensive regulatory reports, testing logs, and compliance certifications for underground and aboveground storage tank systems, ensuring full adherence to applicable environmental regulations. All deliverables produced under this agreement, including documentation and records generated during the process, will become the exclusive property of Omnitrans upon submission. The work is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The opportunity was posted on August 3, 2026, with a mandatory response deadline of September 3, 2026, at 10:00 PM Pacific Time. The contracting authority is the Procurement Department of OmniTrans in California, and the place of performance is unspecified but tied to OmniTrans operations within the state.

Environmental Consulting Services

POSTED

DEADLINE

Underground Storage Tank (UST) System Inspection & Compliance TestingThe contract requires the performance of routine inspections, leak detection, overfill prevention checks, and cathodic protection testing on underground storage tank systems to ensure full compliance with SB 989, 40 CFR Part 280, and applicable local fire codes. All work must be carried out in accordance with these regulatory standards to maintain environmental safety and operational integrity of UST systems across the service area. The scope is focused on ongoing maintenance and verification activities critical to preventing contamination and ensuring adherence to state and federal environmental protection requirements. This subcontract is issued by the Procurement Department of OmniTrans in California, with a response deadline of September 3, 2026, at 10:00 PM. The NAICS code 221210 indicates the work falls under water, sewage, and other systems, aligning with utility infrastructure oversight. The solicitation was posted on August 3, 2026, and bidders must submit proposals in time to be considered for award. The place of performance and contact details are unspecified, indicating the work may be distributed across multiple locations within California under the agency’s jurisdiction.

Natural Gas Distribution

POSTED

DEADLINE

Specialty Tools and Application EquipmentThe Contract for Specialty Tools and Application Equipment seeks suppliers to provide a range of paint application tools essential for automotive refinishing operations, including mixing cups, funnels, spray gun cleaners, and dispensing equipment. These items are critical for ensuring precision, efficiency, and cleanliness in paint application processes within automotive repair and restoration environments. The procurement is classified under NAICS code 339999, indicating it involves other miscellaneous manufacturing, and is structured as a subcontract, meaning the winning vendor will supply goods to a prime contractor or intermediary rather than directly to the agency. The solicitation was posted on August 3, 2026, with a response deadline of August 28, 2026, at 10:00 PM Pacific Time. The contracting entity is the Procurement Department of OmniTrans, operating under the California state agency framework, and the place of performance is unspecified but likely tied to operational facilities within the state. There is no set-aside designation, meaning all qualified vendors may compete regardless of business size or ownership status. All interested parties must submit proposals through the online portal linked in the contract details, and technical specifications for the required tools are expected to be outlined in the full solicitation documentation available on the provided platform.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Cleaning and Surface Preparation ChemicalsThe contract titled Cleaning and Surface Preparation Chemicals is a subcontract issued by the Procurement Department of OmniTrans in California, seeking suppliers to provide degreasers, surface cleaners, and decontamination agents essential for pre-paint surface preparation and repair workflows. These chemicals must meet specific performance and safety standards to ensure effective cleaning and surface readiness prior to painting in industrial or fleet maintenance environments. The solicitation was posted on August 3, 2026, with a firm deadline for responses on August 28, 2026, at 10:00 PM Pacific Time, requiring interested vendors to submit proposals within this window to be considered. The NAICS code 325199 indicates the category pertains to other chemical product and preparation manufacturing, suggesting the supplied products must be formulated and packaged to commercial and industrial specifications. Performance of the contracted work is expected to occur within California, with no additional location details specified. There is no set-aside designation indicated, meaning any qualified supplier may bid without eligibility restrictions based on business size or ownership type. All communications and submissions must be made through the provided vendor portal link, and no point of contact information is listed in the public posting.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

Polishing, Buffing, and Surface Finishing SuppliesThe contract titled Polishing, Buffing, and Surface Finishing Supplies seeks the provision of polishing compounds, buffing pads, applicator tools, and surface protectants specifically for use in paint correction and vehicle finish preservation. It is issued as a subcontract under the NAICS code 325612 by the Procurement Department of OmniTrans in California, with a response deadline of August 28, 2026, at 10:00 PM. The goods required are essential for professional automotive detailing and long-term surface protection, targeting suppliers capable of delivering consistent, high-quality materials compatible with industry-standard detailing practices. All items must meet specified performance and safety standards to ensure effectiveness and reliability in demanding application environments.

Polish and Other Sanitation Good Manufacturing

POSTED

DEADLINE

Adhesives, Fillers, and Body Repair CompoundsThe contract encompasses the supply of automotive body fillers, adhesives, sealants, and bonding compounds essential for collision repair and panel bonding operations within the transportation maintenance sector. These materials are critical for restoring vehicle structural integrity and finish quality, requiring formulations that meet industry standards for durability, cure time, and compatibility with automotive substrates. The procurement is structured as a subcontract under NAICS code 325520, which classifies it within the paint and coating manufacturing industry, indicating a focus on specialized chemical products tailored for high-performance automotive applications. The solicitation was posted on August 3, 2026, with a response deadline of August 28, 2026, at 10:00 PM Pacific Time. The contracting agency is the Procurement Department of OmniTrans, operating under the state of California, though specific location details such as city, zip, or performance address are not provided. The absence of a set-aside designation suggests this opportunity is open to all qualified vendors without restriction based on business size or ownership type. Interested parties must submit proposals through the designated vendor portal linked in the posting, ensuring compliance with technical specifications and delivery requirements for consistent supply to repair facilities across the agency’s network.

Adhesive Manufacturing

POSTED

DEADLINE

Body Shop Abrasives and Sanding SuppliesThe contract titled Body Shop Abrasives and Sanding Supplies seeks the provision of industrial-grade abrasive discs, sanding sponges, and grinding/polishing media specifically for use in vehicle body repair and surface preparation tasks. It is issued as a subcontract under the NAICS code 322220 by the Procurement Department of OmniTrans in California, with a posted date of August 3, 2026, and a firm response deadline of August 28, 2026, at 10:00 PM. The supplies must meet industrial standards for durability and performance in high-volume automotive repair environments, ensuring consistent results during sanding, leveling, and finishing operations. There is no set-aside designation specified, indicating the opportunity is open to all qualified vendors without preference for small, minority, or veteran-owned businesses. Performance is expected to support facilities within California, though specific delivery locations are not detailed. All bids must be submitted through the provided vendor portal link prior to the deadline to be considered.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

DEADLINE

PPG Paint Supply for Fleet MaintenanceThe contract entails the supply of OEM-specified paints manufactured by PPG for use in the repair and refinishing of bus bodies within the OmniTrans fleet maintenance program. It includes a full range of coating products such as basecoats, clearcoats, primers, and sealers, all required to meet strict OEM standards and ensure consistent, reliable color matching across all vehicles in the fleet. The materials must deliver durable, high-quality finishes that withstand environmental exposure and frequent use while maintaining visual uniformity with original factory coatings. This is a subcontract opportunity with a response deadline of August 28, 2026, at 10:00 PM, and the North American Industry Classification System code is 325510, indicating the focus on paint and coating manufacturing. The contract is administered by the Procurement Department of OmniTrans in California, with no specific place of performance designated, implying deliveries may be made to multiple fleet maintenance locations across the state. Interested vendors must submit proposals by the deadline to participate in the procurement process, and all supplied paints must guarantee color match reliability to support consistent fleet aesthetics and compliance with operational standards.

Paint and Coating Manufacturing

POSTED

DEADLINE

PAINT & BODY SUPPLIES

Solicitation # RFQ-MNT27-06

The contract solicitation titled PAINT & BODY SUPPLIES under solicitation number RFQ - MNT27-06 is issued by the Procurement Department of OmniTrans in California and seeks vendors to supply a broad range of body shop materials. The scope includes all necessary supplies for body shop operations, explicitly extending beyond the items listed on the attached bidding form, allowing flexibility for vendors to propose comprehensive and competitive offerings. Responses are due by August 28, 2026, at 10:00 PM Pacific Time, with the solicitation posted on August 3, 2026, and open to eligible suppliers under a State, Local, or Educational (SLED) government procurement process. All work under this contract is expected to support the agency’s operations in California, with no specific city or zip code mandated for performance. Primary point of contact for inquiries is Rick Barone, reachable via email at rick.barone@omnitrans.org or by phone at 909-379-7204. The full solicitation and submission details can be accessed through the provided vendor portal link, and while no NAICS code or set-aside type is specified, vendors are expected to comply with all applicable state and federal procurement regulations governing SLED agencies.

Paint, Varnish, and Supplies Merchant Wholesalers

POSTED

DEADLINE

Storage Tank Testing and Repairs

Solicitation # RFQ-MNT27-07

The contract for Storage Tank Testing and Repairs under solicitation RFQ-MNT27-07 issued by OmniTrans in California requires the contractor to perform annual monitor certifications, California Air Resources Board (CARB)-mandated Vapor Recovery Testing, and SB 989 Secondary Containment Testing across all designated facility locations. All work must strictly comply with current regulations from the Certified Unified Program Agency (CUPA), South Coast Air Quality Management District (SCAQMD), State Water Resources Control Board (SWRCB), and other applicable local, state, and federal agencies. The contractor is responsible for coordinating testing activities with these regulatory bodies and ensuring all test results are properly submitted. Pricing must be submitted online via the provided Cost File and must include all direct and indirect costs such as labor, materials, equipment, and supplies. The contract has a base period of three years with two optional one-year extension periods, with pricing for option years locked in at the time of initial bid and subject to unilateral exercise by OmniTrans with at least 30 days' written notice. The place of performance is tied to OmniTrans’ operational sites, including East Valley, West Valley, and I Street Divisions, with inspection occurring on-site and final administrative acceptance handled at their headquarters in San Bernardino. The award will follow a Lowest Price Technically Acceptable (LPTA) basis, prioritizing responsive and responsible bidders with the lowest cost who meet minimum technical and compliance standards including valid CSLB and ICC certifications, required insurance with A.M. Best A:VIII or higher ratings, and full adherence to 49 CFR Part 26 DBE requirements flow-downed to subcontractors. The contractor must maintain compliance with strict security protocols including visible identification badges, prohibition of unauthorized photography, and reporting of security incidents or malfunctions, and must also comply with confidentiality, indemnity, and public records obligations. All reports, technical data, and documentation generated under this contract become the property of OmniTrans. Invoices must be submitted monthly by the 15th in duplicate via hard copy or electronic means to the designated accounts payable office, and must include contract number, invoice number, delivery description, date, and quantity. Key personnel cannot be reassigned without prior written approval, and OmniTrans reserves the right to remove any individual deemed unsuitable. No contract value is specified due to incomplete pricing submissions in the Cost File, but the agreement is structured as a possible five-year, multi-year, option-based contract with no stated ceiling. All submissions must be

Testing Laboratories and Services

POSTED

DEADLINE