Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Accessories and Consumables Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of compatible syringes, mounting accessories, power cords, and other ancillary items specifically designed for use with Medfusion 4000 pumps. These components are essential consumables and support equipment required to ensure the uninterrupted and safe operation of the infusion devices in clinical settings. The solicitation is issued as a subcontract under the NAICS code 423450, indicating it falls under medical and dental equipment and supplies merchant wholesalers. The Department of Veterans Affairs, through the 241-NETWORK Contract Office 01 (36C241), is the overseeing agency with the place of performance located in White River Junction, Vermont, under zip code 05009-0001. The opportunity was posted on August 4, 2026, and responses must be submitted by August 17, 2026, at 5:00 PM. While the type of set-aside is not specified, interested parties are expected to meet the technical and logistical requirements for delivering certified, compatible accessories that align precisely with the Medfusion 4000 pump systems.

General Info

Supply of Medfusion 4000 pump-compatible syringes and accessories for VA in White River Junction, Vermont, by August 17, 2026.

Agency

Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)View Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

White River Junction, VT, 05009-0001, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of compatible syringes, mounting accessories, power cords, and other ancillary items for Medfusion 4000 pumps.

Similar Contracts

Same NAICS industry code

Solicitation # SPE2DH-26-T-5810

The contract is for the procurement of 2 packages of urinal bags, each containing 20 absorbent units designed to replace traditional plastic urinals by suppressing cleaning needs while still enabling accurate measurement of diuresis and laboratory analysis. These bags eliminate odors and are regulated by the FDA as a Class I medical device, requiring compliance with registration, listing, labeling, and GMP requirements, even though a 510(k) is not needed. The product must be marked according to the latest edition of the Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129, and packaging must follow DLA’s packaging requirements and MIL-STD-2073-1E standards. The unit of issue is a package (PG), with a total quantity of 2 packages ordered under purchase request 7017761630 at a total price of $2.00, with delivery required in 84 days, FOB destination. The item is identified by NSN 6530-01-608-6210 and manufacturer part number 939Y37373, supplied by Riverside Home Medical Supply Inc. All deliveries must be shipped to the designated address in Kaiserslautern, Germany, with the final destination being APO AE 09227-0000, and must be palletized and labeled in accordance with DLA standards. Transportation is governed by DLAD Procurement Notes C19 and C20, and the contract specifies zero variance in quantity. The contract number is SPE2DH-26-T-5810, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 12, 2026, and a required delivery date of August 5, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the contract includes provisions for removal of government identification from non-accepted supplies. Covered defense information requirements may apply, and the contracting official must submit a referral to confirm regulatory compliance through EBS, including manufacturer and bidder details.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

HealthPRO Canada RFP IPAC & Wound Care Contracts for Contracts Commencing June 1, 2027

Solicitation # June2027_RFPCL

HealthPRO Canada has issued a solicitation for contracts commencing June 1, 2027, targeting key products in infection prevention and wound care under solicitation number June2027_RFPCL. The RFP seeks suppliers for a range of medical products including surface disinfectants using citric and lactic acid in ready-to-use formulations, an electrical stimulation device to enhance venous blood flow, and multiple types of skin substitutes derived from biosynthetic, porcine, bovine, and cadaveric sources. Additional items include plant-based bio-cellulose dressings, transparent silicone film dressings, and a catalytic treatment matrix technology designed for wound and skin care applications. The solicitation is open to qualified vendors with responses due by September 16, 2026, and was posted on August 5, 2026. Contracts awarded through this process will serve Saskatchewan’s public sector healthcare system, with performance expected within the province. Primary inquiries should be directed to Christina Singh at rfpinquiries@healthprocanada.com, and further details are available through the Saskatchewan tenders portal.

POSTED

about 5 hours ago

DEADLINE

in about 1 month

BRUSH, SURGICAL SCRU

Solicitation # SPE2DH-26-T-5787

The contract specifies the procurement of 4 packages, each containing 300 disposable surgical scrub brushes, for a total of 1,200 units. Each package must consist of 10 dispensers, with each dispenser holding 30 brushes, and all packaging must comply with commercial standards and be sealed to protect against damage during transit. The product must have a minimum shelf life of 24 months, with no more than three months elapsed between the manufacturer’s date and delivery to the government. All labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, following the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. The brushes are to be shipped in commercial exterior containers suitable for safe delivery via common carrier to Ellsworth AFB, South Dakota, with delivery required within 20 days of award. Suppliers must provide the source and part number for the product, and all items must conform to technical and quality requirements listed in the DLA Master List. The procurement is under solicitation SPE2DH-26-T-5787, with responses due by August 11, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

DRESSING, OCCLUSIVE,

Solicitation # SPE2DS-26-T-305R

The contract specifies the procurement of sterile occlusive petrolatum gauze dressings measuring 3 by 18 inches, with a unit of issue as each. These dressings must have a minimum shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, in strict accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging must be commercial and designed to protect the product from damage, with each unit sealed in a suitable container and grouped in commercial shipping containers that ensure safe, low-cost delivery to Fort Hood, Texas. The product must comply with all applicable DLA packaging and marking requirements, and bidders must clearly identify the source and part number being supplied. The National Stock Number is 6510-01-532-4289, with a quantity of six units required, and delivery must occur within 20 days of award. The solicitation, issued under SPE2DS-26-T-305R, includes technical and quality requirements referenced in the DLA Master List, and the item is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month life. The solicitation closed on August 10, 2026, and the contract is administered by the Department of Defense through the Medical Supply Chain MD Surg FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BAG, STERILIZATION-BIOH

Solicitation # SPE2DH-26-T-5780

The contract is for the procurement of heavy-duty, puncture-resistant biohazard disposal bags in red or orange coloring to indicate contamination, specifically for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package containing 200 units, and the item is identified by NSN 6530-01-078-0365 with the part numbers assigned to MEDEGEN MEDICAL PRODUCTS, LLC and BAXTER HEALTHCARE CORP. The procurement is governed by DLA’s technical and quality requirements referenced in the DLA Master List, with packaging and marking required to comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129. Each unit must be sealed in a protective container, and shipping containers must ensure safe, cost-effective delivery to the destination point while adhering to commercial packaging standards. The delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Packaging must follow MIL-STD-2073-1E, and all items are subject to Covered Defense Information requirements. The solicitation number is SPE2DH-26-T-5780, posted August 4, 2026, with proposals due by August 11, 2026, and the point of contact is Tina Vu of the Department of Defense’s Medical Supply Chain FSH.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

OMEPRAZOLE EXTENDED-RE

Solicitation # SPE2DP-26-T-4490

OMEPRAZOLE EXTENDED-RELEASE CAPSULES, 20 MG delayed-release, are procured in 90-count bottles under unit of issue BT, with each bottle containing 90 capsules. The product must have a minimum shelf life of 21 months remaining upon delivery to the first government activity, with a total approved shelf life of 24 months that is non-extendable. All packaging and marking must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure protection from damage during transit. Packaging must be commercial grade, using sealed unit containers and appropriately labeled commercial shipping containers suitable for safe delivery via common carrier at the lowest rate to the destination. The item is subject to FDA regulation and requires pre-award confirmation through EBS referral by the contracting official. The supplier must be Sandoz Inc. with NDC 00781-2868-92, and delivery must be FOB destination within 20 days of the contract award. The shipment must be sent via traceable means, excluding parcel post, to Fort Campbell, Kentucky, and must be palletized according to DLA packaging requirements. The material is not classified as hazardous per FED-STD-313 and must be packaged in compliance with ASTM D3951, unless higher DLA technical requirements override it. All labeling, packaging, and documentation must strictly follow DLA’s Master List of Technical and Quality Requirements, and the contract includes a zero tolerance for quantity variance.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

END PLUG, VISCOMETER

Solicitation # SPE2DH-26-T-5801

The contract pertains to the procurement of an end plug for a viscometer, specifically designated for use at an oil test center and identified by the NSN 6630-01-498-9904, with a unit of issue of one each. The requirement is for a single unit under purchase request 7017735493, with delivery expected within 20 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the applicable revision is determined by the solicitation issuance or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation number is SPE2DH-26-T-5801, posted on August 4, 2026, with a response deadline of August 11, 2026. The acquisition is classified under NAICS code 423450, managed by the Department of Defense through the Medical Supply Chain FSH office, with performance required in Pascagoula, Mississippi, 39568. Primary point of contact is Tina Vu, reachable via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

MANUAL, OTC, TECHNICA

Solicitation # SPE2DH-26-T-5804

This contract pertains to the procurement of a single unit of a regulated medical item identified by NSN 6630014989899 and part number MA-K-10368-6, supplied by DISTRIBUTION SPECIALISTS INC, under solicitation SPE2DH-26-T-5804. The item is subject to strict packaging and marking requirements dictated by the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951 and MIL-STD-129; instead, packaging must comply with Medical Marking Standard No. 1, available through DLA Troop Support. The product must be sealed in a protective unit container and packed in commercial shipping containers suitable for safe transport at the lowest cost to the designated destination, with no tolerance for quantity variance. The item is regulated by the FDA, requiring referral through EBS for confirmation prior to award, and must include full supplier and manufacturer details. Mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lamps, and medical instruments, which must be shockproof and equipped with secondary containment per NAVSEA 5100-003D. Delivery is required FOB destination within 20 days of contract award, with inspection and acceptance also occurring at the destination. Shipping must utilize traceable methods only, explicitly excluding parcel post, and must be directed to the vessel shipment address for USS KANSAS CITY LCS 22 via DLA Vendors using VSM and RDD 777. The contract mandates palletization in accordance with RP001 and adherence to all applicable DLA packaging directives. The government requires specific tracking and administrative codes including DIC A4A, DIST 9B, and FC NR, and the original required delivery date is August 6, 2026, with an assigned project code ZJ7 TP 2 and supplier identifier YNEA01. Contact for inquiries is Tina Vu at DLA, and the solicitation closed on August 11, 2026, with the item classified under NAICS 423450 for medical and surgical equipment distribution.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CORD, POWER, OTC

Solicitation # SPE2DH-26-T-5797

A power cord measuring six feet in length is being solicited under a federal procurement initiative for a single unit, identified by NSN 6630-01-498-9896 and designated as OTC. The requirement is part of purchase request number 7017735492, with delivery expected within 20 days of award, and bidders must clearly indicate the source and part number they intend to supply. The solicitation is issued under contract number SPE2DH-26-T-5797, posted on August 4, 2026, with responses due by August 11, 2026, and falls under NAICS code 423450 for electrical equipment and supplies wholesale. The procuring entity is the Medical Supply Chain FSH within the Department of Defense, with performance to take place at an FPO address with ZIP code 96694. Primary contact for inquiries is Tina Vu, reachable via email and phone listed in the solicitation, and full details are accessible through the DIBBS online portal.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

ANALYZER, ELECTRONIC

Solicitation # SPE2DH-26-T-5799

The contract pertains to the procurement of one electronic analyzer, specifically an Oil Test Centre, Version F, designed for medical acquisition use. The device operates on AC power with a voltage range of 110.0 to 240.0 volts and features a circuit-based indicator type. It must be delivered as a complete unit, properly packaged in a sealed container capable of preventing damage or breakage, and shipped in commercial exterior containers that ensure safe transport via common carrier at the lowest possible rate to the specified delivery point. All packaging and marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed marking instructions are available through DLA Troop Support. The item is identified by NSN 6630-01-498-9905 and is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The contract prohibits the intentional use of mercury or mercury-containing compounds in the device or its components, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents as defined by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Bidders are required to specify the exact source and part number being offered, and the response deadline is August 11, 2026, with delivery expected within 20 days after award. The contract is administered under solicitation SPE2DH-26-T-5799 by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

DISPOSAL CONTAINER, HYP

Solicitation # SPE2DH-26-T-5789

The contract specifies the procurement of a transparent red, autoclavable, snap-lid disposal container designed for hypodermic needles and syringes, with a nominal capacity of 5.0 quarts and dimensions of 4.75 inches in depth, and 11 inches in both height and width. Each unit is packaged as a PG, where one PG equals 20 individual containers, and the outer container is made of plastic. The product must comply with DLA packaging requirements and is subject to the DLA Master List of Technical and Quality Requirements, which governs applicable specifications. The container must not contain any heavy metal constituents such as chromium or lead capable of generating hazardous waste. Packaging must adhere to Commercial packaging standards and the Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must ensure protection from damage during transit in suitable shipping containers. Each unit must be distinctly marked in accordance with the specified medical marking standard and delivered FOB destination within five days of award. The item, identified by NSN 6530-01-283-0098 and manufacturer part number 85131 by COVIDIEN SALES LLC, is regulated by the FDA, requiring a referral through EBS for confirmation. Inspection and acceptance occur at the destination, with zero variance allowed in quantity, and delivery is targeted to Fort Lewis, Washington. The contract falls under the NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

DRAPE, SURGICAL

Solicitation # SPE2DH-26-T-5770

The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Same awarding agency

J042--Fire Alarm System Inspection, Testing, Maintenance, and Certification Services at the Bedford VA Medical Center

Solicitation # 36C24126Q0613_0001

This contract, issued under solicitation number 36C24126Q0613 and amended via Amendment No. 0003 on July 27, 2026, is a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside for Fire Alarm System Inspection, Testing, Maintenance, and Certification Services at the Bedford VA Medical Center and its affiliated Community-Based Outpatient Clinics in Massachusetts. The scope includes routine and emergency maintenance of fire alarm systems, fire suppression systems, kitchen suppression systems, and fire extinguishers across multiple locations, with services governed by VHA directives, NFPA 72, OSHA regulations, and The Joint Commission standards. The contract features a one-year base period beginning September 1, 2026, and four one-year option periods extending through August 31, 2031, with an additional six-month option for extension under FAR 52.217-8. The majority of fire extinguishers (712 of 719) operate on a 12-year life cycle with 6-year maintenance intervals, while three 10lb Carbon Dioxide and four 6Ltr Class K extinguishers follow a 5-year life cycle. No equipment upgrades are included; the contract is strictly limited to the replacement of existing components, with future upgrades like the EST3 to EST4 transition planned separately. Performance must comply with strict quality thresholds, including 99% response times for service requests and 100% accuracy in tracking unique device identifiers. Quarterly testing of 25% of devices and annual comprehensive system testing are required, with all activities documented and submitted for COR approval. The evaluation process is trade-off based, prioritizing technical capability and past performance before price, and is not LPTA. Offerors must be current in SAM with a valid UEI, self-certify as SDVOSB under NAICS 541990, and comply with FAR clauses including 52.209-9, 52.212-4, 52.217-8, and VA-specific clauses such as 852.219-73 and 852.204-70, which require identity verification and credentialing of personnel. Proposals must be submitted electronically by August 10, 2026, at noon Eastern Time via

All Other Professional, Scientific, and Technical Services

POSTED

about 9 hours ago

DEADLINE

J066--PM&S Hamilton SAM HD

Solicitation # 36C24126Q0720

The Department of Veterans Affairs intends to award a sole source contract to Hamilton Storage Technologies, Inc. for preventative maintenance and service of existing laboratory equipment, specifically the SAM HD system at the VAMC Boston, Jamaica Plain Campus. This action is justified under FAR 6.302.1-1 due to the proprietary nature of the equipment, which requires specialized parts and technical expertise only available from the original manufacturer. No competitive solicitation will be issued, as no other supplier can meet the agency’s technical requirements. The contract will cover all necessary labor and proprietary components to ensure continued operation of the equipment. The NAICS code is 811210 with a size standard of $34.0 million, and the PSC/FSC is J066. Interested parties may direct inquiries to Contract Specialist Shannon Haberern via email at shannon.haberern@va.gov. Responses to this notice are requested by August 10, 2026, at 6:00 PM EST, though the Contracting Officer retains full discretion to proceed with sole source award regardless of public feedback.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

Secure Web Repository Access and FedRAMP-Compliant Hosting SupportThe contract requires support for maintaining a secure, FedRAMP-authorized web repository dedicated to architectural drawings and facility data, ensuring robust access controls and comprehensive audit logging to meet federal cybersecurity standards. The work centers on sustaining the integrity and compliance of the repository, with an emphasis on continuous monitoring, secure authentication, and detailed activity records to satisfy FedRAMP requirements and protect sensitive government information. Performance is localized to Brockton, Massachusetts, under the Department of Veterans Affairs, specifically managed by the 241-NETWORK Contract Office 01, and the effort is structured as a subcontract under NAICS code 518210, which covers data processing, hosting, and related services. The solicitation was posted on August 4, 2026, with responses due by August 10, 2026, indicating a tight turnaround for qualified vendors to demonstrate their capability to deliver and support a high-assurance, government-certified digital infrastructure in alignment with federal security protocols.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Quality Control and Compliance Review for CAD DeliverablesThe contract requires the performance of independent quality control reviews on CAD drawings and data packages to ensure full compliance with Department of Veterans Affairs standards, specifically focusing on geometry accuracy, proper room numbering, and adherence to designated layer use protocols. The work is classified as a subcontract under NAICS code 541380 and is centered around maintaining the integrity and regulatory conformity of technical deliverables used in VA facilities. All submissions must meet established internal guidelines to prevent costly rework, delays, or non-compliance during construction and operational phases. The opportunity was posted on August 4, 2026, with a firm response deadline of August 10, 2026, at 2:00 PM. Performance is to occur in Brockton, Massachusetts, with a zip code of 02301. The contracting office is the 241-NETWORK Contract Office 01 (36C241), operating under the Department of Veterans Affairs. No set-aside classification is specified, and the point of contact information is not provided, requiring proposers to rely on the published SAM.gov link for further details and submission procedures.

Testing Laboratories and Services

POSTED

DEADLINE

Space and Capital Asset Inventory (CAI) Data SynchronizationThe contract requires precise maintenance and synchronization of room, space, and Capital Asset Inventory (CAI) data to ensure consistency with current floor plans and accurate recording of key attributes such as square footage and occupancy levels. This effort is critical to maintaining data integrity across facility management systems and supports operational efficiency by aligning physical space configurations with recorded asset information. The work must be performed with attention to detail to reflect any changes in layout, usage, or capacity in real time. This subcontract is issued by the Department of Veterans Affairs under the 241-NETWORK Contract Office 01 (36C241), with performance located in Brockton, Massachusetts, zip code 02301. It falls under NAICS code 541611 for Management Consulting Services and was posted on August 4, 2026, with a response deadline of August 10, 2026, at 2:00 PM. The contract does not specify a set-aside type or point of contact, and interested parties must submit proposals through the designated SAM.gov portal by the stated deadline to be considered for award.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Field Verification and Non-Destructive Measurement ServicesThe contract entails onsite field verification services at Veterans Affairs healthcare facilities, requiring precise, non-invasive measurements and documentation in active clinical environments. Contractors must produce detailed field notes and discrepancy reports that reflect the actual conditions of facilities without disrupting operations or compromising patient care, ensuring data integrity and compliance with architectural and engineering standards. The work is focused on verifying existing conditions for potential renovations, upgrades, or maintenance planning, with measurements conducted using non-destructive methods to avoid damage to infrastructure or interference with medical services. The solicitation is classified as a subcontract under NAICS code 541370, associated with engineering services, and is managed by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01. Performance is strictly limited to the Brockton, Massachusetts location with ZIP code 02301. The opportunity was posted on August 4, 2026, with a required response deadline of August 10, 2026, at 2:00 PM. No set-aside designation is specified, and there is no designated point of contact listed for inquiries. The work demands high precision, situational awareness, and the ability to operate seamlessly within occupied healthcare settings.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

CAD-Based Architectural Drawing UpdatesThe contract requires the updating of digital architectural floor plans in native CAD format according to government-provided redlines, as-built documentation, or written directives. Work includes the precise development of room polygons and strict adherence to layer standards to ensure accuracy and compliance with federal architectural specifications. All revisions must be delivered in the original CAD file structure without loss of detail or integrity, maintaining alignment with current industry practices for public facility documentation. Performance is to be executed in Brockton, Massachusetts, with a response deadline of August 10, 2026, at 2:00 PM. The solicitation is classified as a subcontract under NAICS Code 541410, indicating architectural design and related services. The awarding entity is the Department of Veterans Affairs, specifically the 241-NETWORK Contract Office 01 (36C241). There is no set-aside designation, and while the point of contact information is not provided, the contract is accessible through the official SAM.gov platform for further details.

Interior Design Services

POSTED

DEADLINE

Hazardous Material Handling & Waste Disposal

Remediation Services

POSTED

DEADLINE

Safety, Infection Control & Site Management Plan Development

Environmental Consulting Services

POSTED

DEADLINE

Electrical & Controls Integration

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

HVAC Mechanical Installation & Piping

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Chiller Unit Supply (OEM or Equivalent)

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE