Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Accumulator System Supplier

Open

State & Local

Response Deadline11/16/2026, 02:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement involves the supply of a double slit belt accumulation conveyor system for prime contractors working on facility projects at UNC Charlotte. The scope of work specifically requires the delivery of one AEROWERKS Model No. J080775-01 Accumulator, which must be equipped with an accumulation photo sensor, an anti-jam switch, and a remote start/stop station. To ensure safety and regulatory compliance, all provided equipment must carry UL or NEMA markings and adhere to OSHA requirements and state inspector approvals. The procurement process for this system is managed under NAICS code 333922, with a response deadline set for November 16, 2026.

General Info

Subcontract for one AEROWERKS belt conveyor system at UNC Charlotte by November 2026.

Agency

North Carolina → Unc - Charlotte

NAICS

333922 - Conveyor and Conveying Equipment Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 66-27034JH.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Hobart/Aeroworks Waste System Pulper/Accumulator

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 02:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina → Unc - Charlotte

ContactsNo contacts available

OfficeN/A

Organization / AgencyNorth Carolina → Unc - Charlotte

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a double slit belt accumulation conveyor system for prime contractors on UNC Charlotte facility projects. Provides one AEROWERKS Model No. J080775-01 Accumulator including a remote start/stop station, accumulation photo sensor, and anti-jam switch. Equipment must carry UL or NEMA markings and meet OSHA requirements and state inspector approval. Delivers one AEROWERKS Accumulator system.

Similar Contracts

Same NAICS industry code

Solicitation # CP25013

The Port of Lake Charles is soliciting proposals for the engineering, design, fabrication, assembly, erection, transportation, testing, and commissioning of one new portal mounted traveling import hopper and related parts for its Bulk Terminal in Sulphur, Louisiana. The procurement includes an option for the owner to order one additional unit within twelve months of handover and requires a spare parts allocation equal to at least 5 percent of the purchase price per hopper. The equipment must be capable of safely handling bulk materials such as Bayrite, Rutile, and Petroleum Coke, adhering to strict technical specifications regarding volumetric capacity, dimensions, and safety standards, including NFPA 70E, OSHA, and ANSI Z 53.1. Proposals are due by November 20, 2026, and must include a bid bond, a reference list of installations from the last five years, and evidence of local sales support in the Southeast United States. Evaluation is based on a 125-point system to determine the order of contract negotiations. The selected contractor will be responsible for insurance and delivery to the site, while the owner handles customs clearance. Payment will be issued via wire transfer within 45 days of approved milestone invoices. Acceptance of the equipment occurs in stages, requiring a Pre-Shipment Certificate at the fabrication site and a final certificate of substantial completion at the delivery site following rigorous testing and documentation review.

Port of Lake Charles

POSTED

DEADLINE

Garment Conveyor System Manufacturing & SupplyThis subcontract involves the manufacturing and supply of heavy-duty steel standalone garment conveyor systems for prime contractors working on Department of Veterans Affairs facility projects in Orlando, Florida. The systems must be capable of storing over 2,200 garments and feature both forward and reverse movement capabilities, integrated with essential safety interlocks and emergency stop mechanisms. Strict adherence to spatial requirements is mandatory, with footprint limits set at 230 by 128 inches and 210 by 128 by 84 inches, while ensuring a minimum aisle clearance of 60 inches. The scope of work concludes with the delivery of the physical conveyor components to the designated project site.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

3910--FY27 EMS Uniform Conveyors

Solicitation # 36C24827Q0115

The Department of Veterans Affairs, Network Contracting Office 8, is conducting market research via a Sources Sought Notice for a turnkey solution to replace the hospital garment conveyor system at the Orlando VA Medical Center. The project requires the removal and disposal of the existing system, restoration of the affected areas to original condition, and the installation of a new automated garment conveyor system. The new system must be fabricated from heavy-duty steel, support a minimum capacity of 2,200 garments, and operate in both forward and reverse directions. It must fit within specific footprint dimensions for a two-level storage room without requiring structural modifications to the building. A critical requirement is that the system and its integrated inventory management solution must operate as a completely standalone entity. It cannot require connectivity to the hospital network, internet, cloud services, or external databases for normal operation, and all software updates must be performed locally on a provided dedicated desktop computer. The contractor will be responsible for providing comprehensive documentation, on-site training for government personnel, a minimum one-year manufacturer warranty, and a detailed preventive maintenance manual. Interested businesses under NAICS 333922, with a size standard of 500 employees, must submit a capability statement of no more than five pages to Contracting Officer Benjamin Amato by November 12, 2026. The submission must include company identifiers, socioeconomic status, and evidence of the ability to provide the required system. Service-Disabled Veteran-Owned Small Businesses or Veteran-Owned Small Businesses must specifically demonstrate the ability to provide a product manufactured by a small business to be considered capable.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Conveyor Belt Maintenance and Repair Service

Solicitation # W90VN827QA001

Solicitation W90VN827QA001 is a fixed-price contract for conveyor belt maintenance and repair services at the Inchon Military Mail Terminal located at Inchon Airport, Cargo Terminal A. The scope of work requires the contractor to provide all labor, tools, equipment, and materials to perform preventative maintenance twice monthly and provide on-call emergency repairs from Sunday through Saturday between 0600 and 1800 hours. The period of performance begins on December 1, 2026, and consists of a base year with four subsequent option years, with a total potential duration not to exceed 66 months and a possible service extension of up to six months. Award is based on three factors: technical capability, past performance, and price. To be eligible, offerors must demonstrate at least three years of experience in conveyor belt maintenance within the last five years and provide valid business registration from the Republic of Korea government. Proposals must be submitted electronically via the PIEE Solicitation Module, including both a priced original and a redacted version. Invoicing is processed through the Wide Area WorkFlow system. The contractor is required to follow manufacturer service manuals and maintain strict safety and cleanliness standards at the performance site.

0906 Aq Co Contracting Bat

POSTED

DEADLINE

PALLET, MATERIAL HANDLI

Solicitation # SPE8EF-27-T-0242

This solicitation, issued by DLA Troop Support Construction and Equipment Manufacturing and Construction, is for the procurement of 10 material handling pallets under NSN 3990002221044. The pallets must be manufactured in accordance with Part 9 of ANSI MHI-2016 and the specified wood species classes in Table 9.5. A critical technical requirement is that all wooden pallets must be constructed from heat-treated material, specifically treated at 56 degrees Centigrade for 30 minutes, and certified by an accredited agency recognized by the American Lumber Standards Committee. Markings must be contrasting, clearly visible, and applied to the stringer or block on opposite sides and ends of the pallet. The delivery is set for October 27, 2026, with a delivery timeframe of 20 days after the order, shipped FOB Destination to the USPFO Activity MT ARNG at Fort Harrison, Montana. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with acceptance based on zero non-conformances in the sample lot. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirement RP001. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding of covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Dental Vacuum Pump and Fluid Separator SupplyThis subcontract, managed by the Department of Veterans Affairs Network Contract Office 7, involves the supply of specialized dental vacuum pumps, fluid separators, and related components for prime contractors working on VA dental facility projects. The scope of work requires the provision of hardware that is fully compatible with existing VA dental equipment and strictly compliant with VA Design Manuals. In addition to the physical hardware, the contractor is responsible for delivering essential technical documentation, including system schematics, operator manuals, and warranty manuals. The project is categorized under NAICS code 333922 and will be performed in Decatur, Georgia. Interested parties should note that the solicitation was posted on November 3, 2026, with a response deadline of November 10, 2026.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

MSU IFB Brand Specific Aerowerks Rotary Tray Accumulator/Conveyor System Purchase and Installation

Solicitation # MSU-IFB-2027-0880

Montana State University Culinary Services is issuing an Invitation For Bid (MSU-IFB-2027-0880) for the purchase and installation of an Aerowerks Rotary Tray Accumulator/Conveyor System. This brand-specific procurement is intended for a high-volume residential dining facility to support critical dish return and ware washing operations. The contract requires the system to be designed for continuous, high-volume institutional food-service use. The total cost must encompass the equipment, delivery, installation, and training. Bids are due by November 16, 2026, and must include an itemized quote, manufacturer's descriptive literature to verify quality and compliance, and a current W-9 form. The award is based on technical compliance with the required Aerowerks specifications and pricing. Successful bidders must adhere to several university-specific mandates, including registration in the SmartBuyMSU e-procurement system, acceptance of an all-or-none award clause, and compliance with Montana Code Annotated 30-20-301 regarding nondiscrimination against firearms entities. Payment terms are set at Net 30, and the university utilizes DocuSign for electronic contract execution. Offerors are also required to disclose the use of artificial intelligence in their proposal development and provide designated contact information for both contract and financial liaisons.

POSTED

DEADLINE

SDB Sludge Conveyors Rebuild

Solicitation # 10008935

The City of Toledo Department of Public Utilities, Division of Water Reclamation, is soliciting bids for the SDB Sludge Conveyors Rebuild project. The scope of work requires a qualified contractor to conduct field inspections and furnish replacement components—including conveyor belts, pulleys, idlers, drive assemblies, take-up components, and plows—for five existing belt conveyors identified as A, B, C, F, and G located in the Sludge Dewatering Building at the Bay View Water Reclamation Plant. The objective is to restore mechanical reliability and extend the service life of the systems while retaining existing frames and structural supports. All removal, installation, testing, and commissioning will be performed by the City's maintenance staff. The contract features a performance period of eighteen months, and all provided materials must carry a twenty-four month warranty. Bids will be evaluated based on the lowest and best offer, considering price, local preference, and past experience with the City. Submissions must be made electronically via the PlanetBids portal and include a 5% bid bond, along with mandatory city, annual, and project paperwork, including EEO certifications and Living Wage affidavits. Awarded contractors must comply with Toledo Municipal Code Chapter 187 regarding living wages, provide certified payrolls, and attend a pre-construction meeting. Additional requirements for the successful bidder include providing payment and performance bonds, maintaining specific commercial general liability and automobile insurance limits, and adhering to all OSHA and City safety regulations. Payment is issued within thirty calendar days following the acceptance of deliverables or receipt of a proper invoice.

DPU/Water Reclamation Department of City of Toledo

POSTED

DEADLINE

Request for Proposal Automated Materials Handling (AMH) System

Solicitation # RPL2026-09

The Regina Public Library, operating under the Saskatchewan Public Sector, has issued a solicitation for an Automated Materials Handling (AMH) System. This request for proposal, identified as RPL2026-09, seeks a comprehensive solution to automate the movement and sorting of materials within their facilities located in Saskatchewan, Canada. Interested parties must submit their responses by the deadline of November 24, 2026. For further inquiries or submission details, the primary point of contact is Jeff Demitor, who can be reached via email or phone.

Regina Public Library

POSTED

DEADLINE

Custom Material Handling Pallet FabricationThis subcontract involves the fabrication of 18 specialized material handling pallets for prime contractors supporting Department of Defense procurement projects via DLA Troop Support. The units must be manufactured in strict accordance with Part 9 of MHI-2016, ASME MH1, and reference drawing 14153 03204, including the application of specific ID005 object text ID ST markings. The selected provider must ensure full compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. Once completed, the 18 pallets are to be delivered FOB Origin to Moorestown, New Jersey.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

PALLET, MATERIAL HANDLI

Solicitation # SPE8EF-27-T-0216

Solicitation SPE8EF-27-T-0216 is a request for quotations from the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of 18 material handling pallets, identified by NSN 3990011059584. The pallets must be manufactured in accordance with Part 9 of MHI-2016 and adhere to ASME MH1 and reference drawing 14153 03204. Specific requirements include the use of wood species classes specified in Table 9.5 and the inclusion of ID005 object text ID ST marking. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331 with a zero-based sampling plan. The delivery is required within 20 days after order, with an original required delivery date of October 1, 2026, shipping to the Combat Systems Engineering Site in Moorestown, New Jersey. Packaging must comply with ASTM D3951 and RP001 DLA requirements, with labeling following MIL-STD-129. The contract incorporates several regulatory mandates, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Payment processing is handled electronically via the Wide Area WorkFlow system. This buy may be a candidate for automated award and includes a price evaluation preference for HUBZone small business concerns.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

UPS Battery SupplierThis subcontract opportunity is for a UPS Battery Supplier to provide industrial-grade replacement battery modules and cells for the Hershel Woody Williams VA Medical Center in Huntington, West Virginia. The selected supplier will deliver OEM-compatible components that meet specific technical specifications for eight installed uninterruptible power supply systems. While not mandatory, ISO9001 certification is preferred for candidates fulfilling this requirement. Managed by the Department of Veterans Affairs Network Contract Office 5, the solicitation was posted on October 26, 2026, with a response deadline of November 12, 2026. The scope of work includes the physical delivery of the battery modules and cells to the project site to support prime contractors working on facility projects. The contract falls under NAICS code 333922.

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

More opportunities from North Carolina → Unc - Charlotte

Same awarding agency

Mechanical/Electrical Installation ServicesThis subcontract for Mechanical and Electrical Installation Services involves the assembly and installation of waste system and accumulator equipment for prime contractors on UNC Charlotte facility projects. The selected provider is responsible for coordinating the complete assembly process, installing all equipment according to manufacturer specifications, and conducting operational testing to ensure full functionality. The contractor must ensure all work complies with industry practices as well as state and federal clean air and water pollution requirements. The final deliverable is a fully operational, tested, and accepted system. This opportunity is categorized under NAICS code 238210, with a response deadline of November 16, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 20 hours ago

DEADLINE

Waste System Pulper SupplierThis subcontract agreement outlines the procurement of a commercial waste system pulper for prime contractors working on UNC Charlotte facility projects. The supplier is required to deliver one Hobart Model No. WPR1260 Waste System Pulper that adheres to the technical specifications detailed in Section 5.1. To ensure safety and regulatory compliance, the equipment must feature UL or NEMA identification markings and satisfy all OSHA, clean air, and water pollution requirements. Final acceptance of the unit is contingent upon approval by state inspectors.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Hobart/Aeroworks Waste System Pulper/Accumulator

Solicitation # 66-27034JH

The University of North Carolina at Charlotte has issued solicitation 66-27034JH to procure and install Hobart branded kitchen equipment on its main campus. The scope of work specifically requires the procurement of one Hobart Model No. WPR1260 Waste Pro remote pulper, capable of processing 1100 lbs of waste per hour, along with an Aeroworks Model No. J080775-01 accumulator and associated components including a 5 hp slurry pump, under dish table, and adapter ring. The contract includes the full assembly and installation of the equipment, which will not be considered complete until the unit is operational, tested, and accepted by the University. A one-year standard warranty covering parts, labor, and travel within the USA is required. Award selection is based on the lowest price among responsive bids that meet all specifications. Delivery is Free-On-Board (FOB) Destination to the UNC Charlotte campus, and all equipment must meet strict safety standards, including certifications from the American Society of Mechanical Engineers, Underwriters Laboratories, or the National Electrical Manufacturers Association. Vendors must submit bids electronically via the eVP portal by November 16, 2026. Required documentation includes a cover letter, pricing, customer references, a certification of financial condition, and sustainability efforts. Additionally, vendors must comply with North Carolina General Terms and Conditions, including E-Verify requirements for employers with more than 25 employees and fair employment mandates.

Food Product Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Airport Baggage Handling System

Solicitation # PUR-RFP2026.08.10068

City of San José - Purchasing

POSTED

DEADLINE

Centrifuge Conveyor Equipment Supplier

City of Haverhill

POSTED

CLOSED

about 10 hours ago

Centrifuge Conveyor Replacement at the Haverhill Wastewater Division Process Building

Solicitation # BD-27-1279-1279C-COH01-134592

City of Haverhill

POSTED

CLOSED

about 10 hours ago

Industrial Belt Conveyor Supplier

Das Purchasing (statewide Bids & Contracts)

POSTED

CLOSED

Solicitation # 45-27

Das Purchasing (statewide Bids & Contracts)

POSTED

CLOSED

Material Handling and Conveyor Systems Supply

POSTED

about 1 month ago

DEADLINE

Asphalt Windrow Elevator Manufacturer/Supplier

Texas Department of Transportation

POSTED

about 1 month ago

CLOSED

Asphalt Windrow Elevator

Solicitation # 601440000053907

Texas Department of Transportation

POSTED

about 1 month ago

CLOSED

Stainless Steel Salt Conveyor Fabrication and Assembly

Department of Transportation

POSTED

about 1 month ago

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS