This Solicitation opportunity from Government of Canada was posted on January 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Acquisition de génératrices pour des répéteurs mobiles pour le ministère de la Cybersécurité et du Numérique

Closed

20106604International

Submission Closed01/19/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335312

New

DIBBS

MOTOR, ELEVATION DRIVE

Solicitation # SPE7M1-26-T-331D

This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of one elevation drive motor under part number 6105-01-305-7689. The contract requires delivery within 10 days after receipt of order and specifies performance at Fort Hood. The solicitation period opens on September 9, 2026, with a response deadline of September 21, 2026. Compliance requirements include adherence to DLA packaging standards, CMMC Level 2 self-assessment for cybersecurity, and the protection of covered defense information. The contractor must follow the DLA Master List of Technical and Quality Requirements and ensure the removal of government identification from any non-accepted supplies. Additionally, alternate offerors are required to submit a complete data package for both approved and alternate parts.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-332F

This contract is for the procurement of three magnetic contactors, specifically TE Connectivity Corporation part number A-1077B1, under National Stock Number 6110-01-716-0380. The acquisition is managed by the Department of Defense Maritime Supply Chain and is designated as a critical application item. Delivery is required within 20 days after the order is placed, with a required delivery date of September 2, 2026. The agreement specifies that shipping must be handled via the fastest traceable means to the designated facility at Randolph AFB, Texas, and explicitly prohibits the use of parcel post. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical standards. Inspection and acceptance will take place at the destination, and the delivery terms are set as FOB Origin.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

POWER SUPPLY SUBASSEMB

Solicitation # SPE7L7-26-T-5139

This contract is for the procurement of two power supply subassemblies, identified by part number 401D1107-1 and NSN 6130014404679, manufactured by EMS Development Corp. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility within 293 days. The agreement specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination. The supplier must adhere to strict quality and packaging standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases such as batteries or sensors as specified by NAVSEA.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-079E

This contract is for the procurement of one magnetic contactor, identified by NSN 6110123352442 and Kissling Elektrotechnik GmbH part number 26.56.08. The order is issued by the Department of Defense under solicitation number SPE7M0-26-T-079E, with a required delivery date of September 9, 2026. Delivery is expected within five days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to the US Army 0101 CS BN CO A Distribution at Fort Riley, Kansas. Compliance with DLA master lists of technical and quality requirements is mandatory, specifically regarding packaging standards ASTM D3951 and MIL-STD-129, as well as DLA packaging requirements for procurement. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

MOTOR-TACHOMETER GENER

Solicitation # SPE7M1-26-T-330Q

This solicitation from the Maritime Supply Chain under the Department of Defense is for the procurement of 47 units of a motor-tachometer generator, identified by NSN 6105-00-463-4909. The contract is classified as a commercial item acquisition with a delivery requirement of 126 days after the order is placed. Performance is located at Robins Air Force Base. The agreement incorporates specific DLA technical and quality requirements, including strict packaging standards and the protection of covered defense information. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals, requiring the submission of substitute chemicals for approval if necessary. Additionally, any alternate offerors must provide a complete data package for both the approved and alternate parts.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

GENERATOR, DIRECT CURRE

Solicitation # SPE7M1-26-T-311C

Solicitation SPE7M1-26-T-311C is a request for quotations issued by the DLA Land and Maritime Maritime Supply Chain for the procurement of 12 direct current generators, identified by NSN 6115-01-283-4057. The requirement is issued under the First Destination Transportation program with shipping terms set as FOB Origin. Delivery is required within 210 days, with a need ship date of July 29, 2026, and a final required delivery date of July 1, 2027. The designated place of delivery is the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. All palletization must comply with RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Offerors must be compliant with NAICS code 335312 and adhere to domestic material restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and cybersecurity safeguarding.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-26-T-330X

This contract is for the procurement of three alternating current motors, identified by NSN 6105011420558 and part number 15S00732-0000. The order is issued by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-330X and is designated as a total small business set-aside. Delivery is required within 20 days after receipt of order, with a required delivery date of September 11, 2026. The agreement specifies that shipping is FOB Origin, with inspection and acceptance also occurring at the origin. The items must be delivered to DZ Ikmal Merkezi Komutanligi in Derince Izmit, Turkey, via the freight forwarder A.J Worldwide Services Inc. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-330S

This contract is for the procurement of 51 motor armatures, identified by NSN 6105005002129 and Meggitt North Hollywood Inc part number 105527. The item is designated as a critical application item. Delivery is required within 42 days after receipt of order, with a need ship date of November 3, 2026, and an original required delivery date of July 1, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Diego. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will take place at the destination. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific provisions for the removal of government identification from non-accepted supplies and physical item marking.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PARTS KIT, FIBER OPTIC

Solicitation # SPE7M1-26-T-331Q

This contract is for the procurement of one fiber optic parts kit, identified as a commercial off the shelf item from Kitco Fiber Optics Inc with part number 0801-9950 and NSN 6080017377548. The delivery is required within 20 days of the order, with a required delivery date of September 3, 2026. Shipping is FOB Origin, and the items are to be delivered to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1. Environmental restrictions are in place, prohibiting the use of class I ozone depleting chemicals and the intentional addition of mercury, except where functionally required by NAVSEA specifications. Technical and quality requirements are governed by the DLA master list, and inspection and acceptance will occur at the destination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-311Z

Solicitation SPE7M1-26-T-311Z is a request for quotations issued by DLA Land and Maritime for the procurement of four centrifugal fans, identified by NSN 4140-01-592-9161 and part number CP1233GD72WLR. This is a total small business set-aside under NAICS code 335312. The required delivery date is September 13, 2027, with a delivery period of 369 days. Shipping is FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Special material restrictions apply, including the Buy American Act and the Berry Amendment, and there is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware. Payment must be processed electronically through the Wide Area WorkFlow system. Offerors must also comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-330K

This contract is a solicitation for the procurement of one magnetic contactor, identified by NSN 6110016038961 and Rockwell Automation part number 100-E40KJ00. The order is issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-330K. Delivery is required within 20 days after receipt of the order, with a required delivery date of April 3, 2026, shipping to the USS Michael Monsoor DDG 1001. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment and the handling of covered defense information. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Inspection and acceptance will take place at the destination, and the shipment must be sent via the fastest traceable means, specifically excluding parcel post.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-331W

This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-331W, is for the procurement of one starter motor with National Stock Number 6110-01-665-5152. The requirement specifies a delivery timeline of 20 days after receipt of order and falls under NAICS code 335312. The contract mandates adherence to DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, it includes a requirement for the removal of government identification from any non-accepted supplies. Alternate offerors must provide a complete data package covering both the approved and alternate parts to be considered.

MARITIME SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract seeks to procure thirteen generators intended for mobile repeaters for the Ministry of Cybersecurity and Digital Affairs. Interested suppliers must submit their bids either in sealed physical packaging or electronically through the Quebec government's electronic tendering system (SEAO) by the specified deadline, January 19, 2026, at 7:00 PM. Physical submissions must be clearly labeled with company details, the tender number, and closing date, and delivered to the Ministry's main office at Édifice Bois-Fontaine, Québec. Electronic submissions must be combined into a single PDF file not exceeding 75 MB. Following the deadline, bids will be publicly opened at the Ministry’s Bois-Fontaine building, with the opening broadcast via Microsoft Teams teleconference. Attendees wishing to join virtually must install Teams, connect before the scheduled time, and provide identification details including name and activate microphone and camera functionalities. Those preferring in-person attendance must notify the provided email address at least 48 hours in advance and identify themselves upon arrival, citing the tender number. The primary contact for technical inquiries is Élisabeth Turgeon, reachable via email or phone. This procurement is managed by the Ministry's Contractual Services Directorate and will be executed in the Capitale-Nationale region of Quebec.

General Info

Procurement of 13 generators for mobile repeaters, bids due January 19, 2026, via SEAO or physical submission.

Agency

Government of Canada → Ministère de la Cybersécurité et du Numérique - Direction générale des services contractuelsView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

Capitale-Nationale (Québec), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 14

Solicitation

Response DeadlineJan 19

Deadline has passed

Submission Closed

01/19/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Ministère de la Cybersécurité et du Numérique - Direction générale des services contractuels

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Ministère de la Cybersécurité et du Numérique - Direction générale des services contractuels

View Agency Profile

Office AddressN/A

Contacts

Turgeon ÉlisabethContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

Objet de l’appel d’offres Le présent appel d’offres a pour but d’acquérir treize (13) génératrices pour des répéteur mobiles pour le ministère de la Cybersécurité et du Numérique. Responsable du dossier Pour toute question technique relative à ce dossier, s'adresser à : Nom : Élisabeth Turgeon Courriel : elisabeth.turgeon@mcn.gouv.qc.ca Présentation des soumissions Seules les soumissions reçues au plus tard à l'heure et à la date limites fixées pour la réception des soumissions seront considérées, qu’elles aient été transmises sur support papier ou par l’intermédiaire du système électronique d’appel d’offres du gouvernement du Québec (SEAO), à l’adresse www.seao.ca. Les soumissions sur support papier doivent être présentées sous emballage scellé et bien identifiées (nom de compagnie, numéro de l'appel d'offres et date de fermeture). Il est de la responsabilité du fournisseur de s'assurer que les documents soient acheminés à : Ministère de la Cybersécurité et du Numérique DGSC-BAO, entrée principale Édifice Bois-Fontaine 880, chemin Sainte-Foy Québec (Québec) G1S 2L2 Dans le cas d’une soumission transmise par voie électronique, les documents de la soumission doivent être combinés en un seul fichier de format PDF. La taille maximale permise pour le fichier combiné est de 75 Mo. Ouverture des soumissions À l’expiration du délai fixé pour la réception des soumissions, leur ouverture publique se fait à l’endroit suivant : Ministère de la Cybersécurité et du Numérique Édifice Bois-Fontaine 880, chemin Sainte-Foy Québec (Québec) G1S 2L2 Le ministre diffuse l’ouverture des soumissions au moyen d’une téléconférence pouvant être suivie en direct en cliquant sur le lien suivant :Rejoignez la réunion maintenant. Toute personne désirant assister à l’ouverture publique des soumissions, par ce moyen, doit préalablement : installer l’application Microsoft TEAMS sur un dispositif d’écoute adéquat ou utiliser la version web (https://teams.microsoft.com); se connecter à la réunion avant l’heure prévue puisqu’il sera impossible de la rejoindre par la suite; saisir son nom et prénom afin de pouvoir être identifié; activer son micro ainsi que sa caméra. Les personnes intéressées à assister à l’ouverture en présentiel doivent préalablement le signifier en communiquant avec le bao@mcn.gouv.qc.ca minimalement 48 heures avant l’heure d’ouverture, et se présenter au comptoir de la réception de l’entrée principale en s’identifiant puis en spécifiant le numéro du présent appel d’offres.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS