ACU Knee & Elbow Pads

Amendment 02, NOTE: The shipping destination is hereby changed to the following address: SC0102 Lion Vallen Industries 340 Moore Avenue, Bldg 8 Suffolk, VA 23434-3820 ________________________________________________________________________ Amendment 01, NOTE: The minimum, maximum and annual estimated quantities (AEQ) for this procurement have changed. See below for quantity breakdown. ________________________________________________________________________ This procurement is for the manufacture and delivery of the ACU Knee & Elbow Pads. Manufacturing shall be in accordance with FQ/PD 04-16 dated September 25, 2006. This will be a Total Small Business Set Aside, Indefinite Delivery Type Contract (IDTC) with minimum and maximum quantities established for One Base Year plus Two one year term options. Best Value Procedures will be utilized with the following evaluation factors: (1) Product Demonstration Models, and (2) Past Performance/Experience. Production Lead Time is 60 days for initial and subsequent orders. Deliveries will be made to Tracy, CA and New Cumberland, PA. All materials will be furnished by the awardee. All responsible sources may submit a response, which, if timely received, must be considered by the agency. ACU Elbow (PGC 02984) * 8415-01-520-4140 X-Short-Short * 8415-01-520-4255 Regular Long * 8415-01-520-4259 X-Long-XX-Long ACU Knee (PGC 02985) * 8415-01-520-4077 X-Short-Short * 8415-01-520-4086 Regular XX-Long Base Period: 114,000Min/570,000Max; Annual Estimated Qty (AEQ) - 456,000 Option 1: 114,000Min/570,000Max; AEQ - 456,000 Option 2: 114,000Min/570,000Max; AEQ - 456,000 The minimum and maximum quantities apply to any combination of Knee and/or Elbow pads for the period identified. Remember to enter information relating to Options in your synopsis! ( FEDBIZOPPS) Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. Solicitation will be posted on https://www.dibbs.bsm.dla.mil/ Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/. A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process. 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the Central Contractor Registration (CCR) system. 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately. A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User. If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided. The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE. DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their CCR registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as - The Berry Amendment) impose restrictions on the DoD's acquisition of foreign products and services. Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and - specialty metals (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. DSCP has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for DSCP Clothing and Textiles (DSCP C&T) solicitations, use the following link to the DSCP C&T Technical Data Repository area at http://www.dscp.dla.mil/Portal/sreqfrm.aspx