Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

ADA Compliance and Accessibility Consulting

Active

State & Local

Response Deadline08/05/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with the Americans with Disabilities Act standards for all aspects of design and construction, ensuring that facilities are accessible to individuals with disabilities. This includes specific provisions for door widths, restroom configurations, informational and directional signage, and continuous pathways of travel throughout the site. The work must be executed with precision to meet or exceed federal accessibility requirements, with close attention to detail in every phase from planning through final build. The solicitation is classified as a subcontract under NAICS code 541620 for architectural and engineering services and is administered by the State of Utah. Proposals must be submitted by August 5, 2026, and the opportunity was posted on July 23, 2026. While no specific location for performance has been detailed, all work is expected to be carried out in alignment with Utah’s obligations under federal accessibility regulations, with no set-aside provisions specified. Bidders must demonstrate proven experience in ADA compliance consulting and a thorough understanding of the technical requirements for accessible design.

General Info

ADA-compliant design and construction required for Utah projects, bids due August 5, 2026, under architectural engineering services.

Agency

UtahView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 04:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / Agency

Utah

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure design and construction meet ADA standards for accessibility, including door widths, restrooms, signage, and path of travel.

Similar Contracts

Same NAICS industry code

Technical Advisory Services for the Allens Creek Reservoir ProjectThe Brazos River Authority is seeking qualified firms to provide Technical Advisor services for the Allens Creek Reservoir Project, with a focus on regulatory permitting at both federal and state levels, water resources engineering analyses, and design of project-specific components. The selected firm will work under the direction of the BRA to safeguard the authority’s and its customers’ interests across a range of critical project tasks, offering specialized expertise to complement the BRA’s internal project team. The scope of work is flexible and will be activated at the BRA’s discretion as needed throughout the project lifecycle, ensuring targeted support where technical depth is most crucial. Proposals must be submitted by August 19, 2026, at 4:00 PM CT, under solicitation number 26-1393, which was posted on July 23, 2026. Interested firms should direct inquiries to Bryan Gray or Clarissa Cabrera at the BRA’s Waco, Texas office, with additional support available from Meagan Nix. The procurement is open to all eligible entities without set-aside restrictions, and the contract will be managed under the authority’s purchasing protocols. All correspondence and submissions must adhere to the requirements outlined in the solicitation, with performance expected to align with the BRA’s objectives for the Allens Creek Reservoir Project in Texas.

BRAZOS RIVER AUTHORITY

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Handling and SDS Compliance SupportThe contract titled Hazardous Materials Handling and SDS Compliance Support involves the preparation and validation of Safety Data Sheets for hazardous materials to ensure full compliance with OSHA standards and applicable city regulations. The work requires precise documentation practices that align with federal and local safety requirements, focusing on accuracy, clarity, and regulatory adherence to protect workers and the public. The subcontract is issued by the City of Dallas under NAICS code 541620, which corresponds to environmental consulting services, indicating a professional services engagement focused on regulatory compliance support. Proposals must be submitted by the deadline of August 21, 2026, at 6:00 PM, following the solicitation posted on July 23, 2026. The opportunity is structured as a subcontract and does not specify any set-aside status, meaning it is open to all eligible contractors without designated preferences. The place of performance and point of contact details are not provided, suggesting that work may be performed remotely or at locations determined by the contractor, as long as deliverables meet the city’s compliance standards. All parties must ensure that SDS documentation is current, properly formatted, and consistent with the latest regulatory guidance to pass validation.

POSTED

about 19 hours ago

DEADLINE

Wildlife Monitoring and Reporting ServicesThe contract entails conducting routine field surveys to monitor bird activity and track population trends in support of aviation safety operations at DFW International Airport. Contractors are required to systematically document wildlife observations and generate detailed monthly reports that include actionable mitigation recommendations to ensure compliance with Federal Aviation Administration guidelines. The work is critical to minimizing bird strike risks and maintaining safe flight operations around the airport environment. This subcontract opportunity, categorized under NAICS code 541620 for scientific and technical consulting services, is posted by DFW International Airport in Texas with a response deadline of August 6, 2026. The solicitation does not specify any set-aside provisions or targeted small business categories. All performance is expected to occur at or near the airport grounds, and while direct point of contact details are not provided, proposals must be submitted through the designated online portal by the stated deadline.

Dfw International Airport

POSTED

about 20 hours ago

DEADLINE

NPDES COMPLIANCE AND PROGRAM SERVICESThe City of Stockton is seeking a qualified professional consultant or team to provide comprehensive NPDES compliance and program assistance services for the Stockton Wastewater Recovery Center. The contractor will be responsible for delivering technical support to ensure ongoing adherence to the NPDES permit requirements, addressing regulatory obligations, and offering guidance on operational improvements and reporting responsibilities. This engagement requires deep expertise in wastewater management, environmental regulations, and permitting processes, with a focus on maintaining compliance and mitigating potential violations. Proposals must be submitted by August 20, 2026, in response to solicitation number PUR 27-001, which was posted on July 23, 2026. The work will be performed entirely within California, specifically at the City’s wastewater facility. The primary point of contact for inquiries is Rajvir Sahota, reachable via phone or email. This procurement is open to all qualified entities without specific set-aside restrictions, and the City intends to select a partner with demonstrated experience in NPDES compliance to ensure the continued safe, lawful, and efficient operation of its wastewater recovery program.

City of Stockton

POSTED

about 21 hours ago

DEADLINE

Environmental Compliance and Permitting SupportThe contract entails providing comprehensive environmental compliance and permitting support for projects under the California Department of Transportation, with primary responsibilities including conducting California Environmental Quality Act assessments, performing wetland delineations, and carrying out cultural resource surveys. These tasks are essential to ensure regulatory adherence and facilitate the approval process for transportation initiatives across the state. The scope of work requires technical expertise in environmental science and state-specific permitting frameworks to support Caltrans in meeting legal and ecological obligations during project development. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 24, 2026, and is classified under NAICS code 541620 for environmental consulting services. The place of performance is statewide within California, indicating that work may be required across multiple locations depending on project needs. While no specific set-aside provisions are identified, interested parties must submit proposals through the CalEProcure portal before the specified deadline to be considered for award. The contract demands a thorough understanding of California’s environmental regulations and an ability to deliver precise, defensible documentation to support permitting outcomes.

California Department of Transportation

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Weed and Pest Control ServicesThe contract titled Weed and Pest Control Services outlines a subcontract for the application of herbicides, insecticides, and integrated pest management practices to control invasive weeds, insects, and rodents across grounds and easements managed by the Trinity River Authority of Texas. The work falls under NAICS Code 541620, indicating it is classified as environmental consulting services, and is intended to support ecological maintenance and public safety through targeted pest and vegetation control. The solicitation was posted on July 23, 2026, with a response deadline of August 12, 2026, allowing potential vendors a limited window to submit proposals. Performance will occur across various locations within Texas under the authority’s jurisdiction, though specific cities or addresses are not listed. The contract is open to qualified subcontractors who can demonstrate expertise in environmentally responsible pest management and compliance with applicable regulations.

Trinity River Authority of Texas

POSTED

about 23 hours ago

DEADLINE

Sustainable and Environmentally Compliant ManufacturingThis contract requires all manufacturing processes to adhere strictly to FAR 52.223-23, mandating full compliance with environmental regulations that prohibit the use of Class I ozone-depleting chemicals. Suppliers must source materials that meet eco-compliant standards and implement green manufacturing practices throughout production to ensure zero contamination from regulated substances. The emphasis is on sustainable sourcing, waste reduction, and environmentally responsible operations to align with federal mandates aimed at protecting the ozone layer and reducing ecological impact. The solicitation is classified as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively available to small businesses certified by the SBA. It falls under NAICS code 541620, which pertains to environmental consulting services, indicating the need for technical expertise in environmental compliance and green manufacturing systems. The contract was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. All work must be performed in compliance with the specified environmental standards, and no deviations from the prohibition of Class I ozone-depleting substances will be permitted under any circumstances.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Handling and SDS ComplianceThe contract pertains to the classification, handling, and regulatory compliance of hazardous materials contained within propeller shaft components, requiring strict adherence to federal and industry safety standards. A primary responsibility includes the preparation and timely submission of accurate Safety Data Sheets that detail the chemical composition, hazards, handling procedures, emergency measures, and disposal methods for all regulated substances involved. Compliance with applicable environmental, transportation, and occupational safety regulations is mandatory throughout the lifecycle of these components, from procurement through manufacturing and delivery. Work under this subcontract must be executed in alignment with NAICS code 541620, indicating it is a scientific and technical services contract, likely supporting defense system supply chains. The solicitation is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with a submission deadline of July 28, 2026, and a posting date of July 23, 2026. The place of performance and specific office details are not provided, but the nature of the work implies coordination across multiple facility locations involved in the production or integration of naval propulsion components. Full regulatory documentation and traceability of hazardous material handling are expected to ensure seamless integration within military systems and compliance with DoD supply chain security protocols.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract titled Hazardous Materials Compliance & Labeling Services requires the identification, classification, and accurate labeling of hazardous materials used in manufacturing or packaging processes. It includes the preparation of Safety Data Sheets in full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard, while also addressing applicable exemptions under OSHA HCS. The work involves ensuring all hazardous substances are properly documented, marked, and communicated to personnel in alignment with federal safety regulations. This subcontract, issued under NAICS code 541620 by the Department of Defense’s Strategic Acquisition Program Directorate, is focused on supporting defense-related operations with robust hazardous materials management. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026. The place of performance and specific location details are not specified, and no set-aside provisions or point of contact information are provided. Contractors must deliver comprehensive compliance services that uphold the integrity of hazardous material handling within defense manufacturing and packaging environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Environmental Compliance MonitoringThe contract seeks a subcontractor to provide environmental compliance monitoring services focused on stormwater management, erosion control inspections, and associated reporting during active site work. The scope requires ongoing observation and documentation to ensure adherence to regulatory standards for water quality and soil stabilization throughout construction or development activities. All services must align with federal environmental requirements and result in timely, accurate compliance reports that demonstrate adherence to applicable rules and permits. The solicitation is issued under the NAICS code 541620 for environmental consulting services and is classified as a subcontract through the Department of Defense’s Strategic Acquisition Program Directorate. The opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026. While specific performance locations and point of contact details are not provided, the work will occur at active DoD project sites requiring environmental oversight, and bidders must be prepared to operate in compliance with federal, state, and local environmental regulations. Participation requires proven experience in site-based environmental monitoring and reporting within government-contracted projects.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive regulatory compliance support for hazardous materials, with a primary focus on the preparation, management, and maintenance of Safety Data Sheets aligned with OSHA’s Hazard Communication Standard and DFARS requirements. This effort ensures accurate, up-to-date documentation for all hazardous substances used or handled under the program, facilitating workplace safety, regulatory adherence, and supply chain transparency. The work must be executed in strict accordance with federal standards to enable proper hazard identification, exposure control, and emergency response procedures. This subcontract, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is categorized under NAICS code 541620 for environmental and other technical consulting services. It has a narrow five-day response window, with submissions due by July 28, 2026, and was posted on July 23, 2026. While specific performance location and point of contact details are not provided, the scope is centered on delivering compliance documentation and support services critical to defense operations. The contractor must demonstrate expertise in hazardous materials regulatory frameworks, particularly in interpreting and applying OSHA and DFARS mandates to ensure full compliance across all applicable contexts.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the preparation, submission, and ongoing maintenance of Safety Data Sheets in full compliance with OSHA’s Hazard Communication Standard and Federal Standard No. 313, ensuring accurate and up-to-date hazard information for all hazardous materials handled or distributed under the agreement. The contractor must establish and sustain a robust SDS management system that meets federal regulatory requirements, including proper formatting, timely updates upon new chemical information or regulatory changes, and secure documentation practices accessible to authorized personnel. This subcontract, issued by the Department of Defense’s Strategic Acquisition Program Directorate under NAICS code 541620 for scientific and technical consulting services, is solicited with a response deadline of July 28, 2026. The work is expected to support defense operations through stringent chemical safety compliance, though specific performance locations and point of contact details are not provided. All deliverables must align with federal mandates to protect workforce health and ensure regulatory adherence across the supply chain.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Utah

Same awarding agency

Utah Tech University - Ice Cream FreezerUtah Tech University is soliciting bids for the procurement of an ice cream freezer to support campus food service operations, ensuring reliable storage of frozen products that meet the institution’s operational, capacity, and performance standards. The solicitation, identified by number 27-0722, was posted on July 23, 2026, with responses due by August 3, 2026, at 6:00 PM MT. The equipment must be capable of sustaining the demands of university dining services while maintaining consistent freezing conditions for ice cream and related frozen items. The procurement is open to qualified vendors and will be fulfilled at the university’s location in Utah, with no specific set-aside or NAICS code indicated. All inquiries and submissions must be made through the official Bonfire Hub portal linked in the posting.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Utah Tech University - 700 E Street Light ProjectUtah Tech University is soliciting bids for the installation of historical street lighting along the 700 East corridor in St. George, Utah, requiring electrical and civil construction contractors to provide all necessary labor, materials, equipment, and services. The project aims to enhance the corridor’s aesthetic and functional qualities with historically accurate lighting fixtures, and all qualified contractors are eligible to submit proposals. Bidders who hold an active Utah State Cooperative Contract for Electrical or Construction Services may receive evaluation preference, and those individuals are strongly encouraged to include their State Master Agreement contract number with their submission to ensure proper consideration. The solicitation, numbered 27-003, was posted on July 23, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM Mountain Time. The work will take place in St. George, Utah, and all bids must be submitted through the designated online portal.

Framing Contractors

POSTED

about 19 hours ago

DEADLINE

Accessory Procurement and IntegrationThe contract pertains to the procurement and integration of one complimentary NETZSCH accessory, which may be either an automation module or an advanced software license, with the option to include additional accessories beyond the initial offering. This subcontract is solicited under the NAICS code 334511, indicating activity within the analytical instrument manufacturing sector, and is issued by the state of Utah through its designated agency office. Interested parties must respond by the deadline of August 4, 2026, at 4:00 PM, with the opportunity posted on July 23, 2026. While no specific point of contact or detailed location information is provided, the procurement is accessible via a public online portal linked to the Utah contracting platform. The agreement supports the integration of technical enhancements to existing equipment, aimed at improving operational efficiency or data analysis capabilities through NETZSCH's proprietary solutions.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

Consumables Supply with Discount ProgramThe contract pertains to the supply of consumables essential for thermal analysis testing, including crucibles, sensors, sample holders, and calibration standards, with a mandatory 15% discount applied to all items except high-temperature graphite and ceramic components, which are excluded from the discount. The solicitation is structured as a subcontract and falls under the NAICS code 423490, indicating a focus on wholesale trade of miscellaneous durable goods. The opportunity was posted on July 23, 2026, with a firm response deadline of August 4, 2026, at 4:00 PM, requiring vendors to submit proposals within this timeframe. The contracting entity is the State of Utah, though specific office details and point of contact information are not provided. The place of performance and delivery specifics are also unspecified in the provided data, leaving implementation logistics to be determined by the selected vendor. All submissions must be made through the designated portal at the provided hyperlink.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

In-House Repair and Refurbishment of Instrument ComponentsThe contract seeks qualified vendors to perform in-house repair, refurbishment, or remanufacturing of failed instrument modules including balance systems, load cells, and DSC sensors, all to meet original equipment manufacturer specifications. Work must be completed to ensure restored components function as intended, with quality standards aligned to the OEM’s original design and performance benchmarks. This subcontract opportunity is open to vendors capable of handling precision instrumentation repair with the technical expertise and facilities required to restore high-sensitivity components without compromising integrity or accuracy. The solicitation was posted on July 23, 2026, with responses required by August 4, 2026, at 4:00 PM. The North American Industry Classification System code is 811212, indicating the focus is on commercial and industrial machinery and equipment repair and maintenance. The contract is issued under the auspices of the Utah agency, though specific location details such as city, state, or address are not provided. Bidders must be prepared to meet all technical requirements outlined by the agency and deliver components that are fully functional, fully documented, and traceable to OEM standards to ensure long-term reliability and compliance.

Computer and Office Machine Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

Replacement Parts Supply for Thermal Analysis InstrumentsThe contract pertains to the supply of OEM or OEM-approved replacement components for thermal analysis instruments, specifically including DSC cells, thermocouples, heating elements, balance systems, laser rods, and TEC elements, all of which must adhere strictly to the original equipment manufacturer's specifications to ensure compatibility and performance. These components are critical for maintaining the accuracy and reliability of thermal analysis equipment used in laboratory and industrial settings. The contract is classified as a subcontract with a NAICS code of 334516, indicating it falls under the category of instrumentation manufacturing for laboratory and measuring devices. The solicitation was posted on July 23, 2026, with a mandatory response deadline of August 4, 2026, at 4:00 PM. The contracting entity is listed as Utah, with the agency organization name also identified as Utah, though no specific office address or point of contact details are provided. The place of performance and other location specifics remain unspecified, and no set-aside type or additional eligibility criteria are indicated. The opportunity is accessible via the provided Bonfire Hub link, and interested parties must submit responses by the stated deadline to be considered for award.

Analytical Laboratory Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

Laboratory Instrument Preventative Maintenance & Calibration ServicesThe contract outlines a comprehensive service agreement for on-site annual preventative maintenance, factory-level calibration, and performance verification of high-precision thermal analysis instruments, specifically including the LFA 467 HT model, all conducted in strict accordance with original equipment manufacturer protocols. These services are essential to ensure the continued accuracy, reliability, and compliance of laboratory instrumentation used in critical thermal analysis applications. The work is expected to be performed at the client’s location, with all procedures aligned to OEM specifications to maintain instrument integrity and operational standards. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 4, 2026. It falls under NAICS code 541380, which categorizes it within other scientific and technical consulting services. The contracting entity is the state of Utah, with Utah listed as both the agency name and organizational name, though no specific office address, place of performance details, or point of contact information is provided. Interested parties must submit proposals through the specified online portal by the stated deadline to be considered for award.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

Part 8 - FinalThe Utah Division of Purchasing intends to award a five-year sole-source service contract to NETZSCH for the maintenance, repair, and calibration of four specialized laboratory instruments at the USREL facility in Utah, citing statutory authority under Utah Code Section 63G-6a-802 and R33-8-101c, which permit non-competitive procurement when only one source can perform the required services. The justification centers on the proprietary nature of the equipment, including unique software, calibration protocols, and OEM-specific parts, which make NETZSCH the sole vendor capable of delivering OEM-level support. The contract includes unlimited on-site service visits, annual preventative maintenance with factory calibration, software upgrades when available, in-house repair capabilities, and a 15% discount on consumables—excluding certain high-temperature components—with one free accessory provided. The total estimated contract value is $278,502.50, with an additional $20,000 allocated for consumables, totaling up to $298,502.50, funded through a combination of federal and state appropriations. No competitive process is being used, and evaluation is based solely on the statutory determination of sole-source eligibility, without any scoring, weighting, or trade-off analysis. Performance is to occur entirely at the USREL facility in Utah under F.O.B. Destination terms with freight prepaid by NETZSCH, and acceptance will be conducted by the government upon completion of on-site services. The contract includes a one-time $1,750 Instrument Health Inspection as a pre-condition for service commencement but does not allow for renewals or extensions beyond the five-year term. Special requirements include mandatory compliance with Utah’s Anti-Boycott laws, prohibiting participation in any economic boycott of the State of Israel or related industries, and a no-export clause prohibiting the re-export of goods to Russia or Belarus. Market research affirming the absence of alternative vendors is required and documented, though no UEI, CAGE, size status, or socioeconomic certifications were provided by the vendor. The contract is being processed without standard procurement due to impracticability of competition, and the Division of Purchasing must provide written approval prior to award. Submissions are due by August 4, 2026, via Utah’s online procurement portal, and all documentation must support the sole-source justification with no formal FAR clauses or standardized evaluation factors applied.

POSTED

about 19 hours ago

DEADLINE

Mechanical Subcontractor Coordination and DocumentationThe contract requires the mechanical subcontractor to prepare and submit detailed shop drawings, product data, and coordination models to ensure accurate installation and integration of mechanical systems. All submissions must align with the DFCM submittal standards and adhere strictly to pipe marking requirements, ensuring uniformity, safety, and compliance throughout the project. The work involves close coordination with other trades to prevent conflicts and maintain construction timelines, with documentation serving as a critical component for approval and field execution. This subcontract, titled Mechanical Subcontractor Coordination and Documentation, is issued by the state of Utah under NAICS code 541330 and is open for responses until August 25, 2026. The scope is focused on technical documentation and coordination rather than direct construction, emphasizing precision in submittals and adherence to established protocols. While no specific location or point of contact is provided, the work is expected to support projects within Utah, with all deliverables evaluated against the mandated specifications to ensure system integrity and regulatory compliance.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Vibration Isolation and Seismic Restraint Supply/InstallationThe contract mandates the supply and installation of vibration isolators and seismic restraints for HVAC equipment to ensure compliance with ICC-ES, OSHPD, and CIF 1.0 standards, focusing on structural safety and performance under seismic and dynamic loads. All materials and workmanship must meet rigorous engineering specifications to protect building systems and occupants, with particular emphasis on certified components and approved installation methodologies that align with these authoritative codes. The opportunity is structured as a subcontract with a response deadline of August 25, 2026, and was posted on July 23, 2026, under the NAICS code 332999 for other fabricated metal product manufacturing. Performance will occur within Utah, though specific location details are not provided. The procurement is administered through the Utah agency’s BonfireHub platform, and all submissions must adhere to the technical and regulatory requirements outlined in the solicitation without deviation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Electrical Interconnection and Code ComplianceThe contract requires the installation of electrical wiring, disconnects, and circuit protection systems for new HVAC units, all in strict adherence to NFPA 70 standards and National Recognized Testing Laboratory (NRTL) testing requirements. This work must ensure safe, code-compliant electrical connections that support the reliable operation of the HVAC systems while meeting all applicable safety and performance benchmarks. The scope is focused on the electrical interconnection aspects only, with no additional mechanical or ductwork responsibilities implied. The contract is classified as a subcontract under NAICS code 238210, with a posting date of July 23, 2026, and a response deadline of August 25, 2026. It is issued by the State of Utah, with no specific location provided for performance, and no set-aside type or agency office details are specified. All proposals must demonstrate full compliance with current electrical codes and NRTL certification standards, and bidders are expected to have the technical expertise and documentation to prove adherence to these requirements without reliance on external citations or referenced files.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Piping and Pressure System InstallationThe contract involves the installation of refrigerant and condensate piping systems requiring welding, pressure testing, and seismic restraints compliant with ASME B31 and AWS D1.1 standards. All work must meet rigorous industry specifications for safety, durability, and structural integrity, with particular emphasis on proper welding techniques and system verification through pressure testing. Seismic restraints must be designed and installed to ensure system stability under seismic events in accordance with applicable codes. The project is structured as a subcontract under NAICS code 238220, which classifies it within the plumbing, heating, and air-conditioning contracting sector. The opportunity was posted on July 23, 2026, with a response deadline of August 25, 2026, and is being managed by the state of Utah through the BonfireHub platform. Place of performance and specific location details are not provided, but performance is expected within Utah. There is no set-aside designation specified for small businesses or other categories, and the contract does not include a designated point of contact for inquiries.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 21 hours ago

DEADLINE

in about 1 month