Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ADA-Compliant 3-Stall Restroom Trailer Rental and Servicing

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was initiated following a sprinkler system failure that caused significant water damage. The scope of work requires the remediation of the entire building, including cleaning visible mold from CMU walls, concrete floors, and vinyl tiles, as well as the removal and replacement of affected drywall, gypsum wallboard, and acoustical tile ceiling finishes. Additionally, the contractor must clean or replace damaged theater seating cushions and perform dehumidification to maintain humidity levels at or below 50 percent. All work must adhere to ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the findings of the Micro Air Inc. Mold Testing report dated April 11, 2024. The contract is a single lump sum award based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Key requirements include the provision of a Certified Industrial Hygienist for verification and final clearance, a detailed remediation plan featuring HEPA filtration and negative air pressure, and compliance with Davis-Bacon Act wage determinations. Bidders must hold a valid Indiana Contractor's License and provide proof of automobile and workers compensation insurance, naming Adams and Associates, Inc. as an additional insured. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, and a 90-day bid guarantee. Work must commence within 14 days of the Notice to Proceed, and payment is issued on Net 30 terms.
Atterbury Job Corps Center

POSTED

about 5 hours ago

DEADLINE

in 11 days
NAICS: 562910
New
SLED
MPE Three Classroom Mold Abatement - Rooms 22, 23, 24
Solicitation # 01 (2026-2027)
The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.
Montebello Unified School District

POSTED

about 22 hours ago

DEADLINE

in 4 days

AI Contract Overview

Show more

The contract requires the supply, delivery, setup, and removal of a 12-foot ADA-compliant 3-stall restroom trailer equipped with water, power, and a handwashing sink, along with comprehensive waste removal and cleaning services to ensure ongoing sanitary conditions. The trailer must fully meet accessibility standards to accommodate individuals with disabilities, and all services must be performed promptly and in compliance with federal regulations governing temporary restroom facilities. This is a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the SBA and FAR 19.5. The solicitation is managed by the Naval Sea Systems Command Indian Head Division under the Department of Defense, with a North American Industry Classification System code of 562910 for Other Waste Management Services. The response deadline is August 12, 2026, at 2:00 PM, and the work is expected to be performed at an undesignated location governed by federal deployment requirements. All vendors must be prepared to coordinate logistics, maintain operational readiness of the unit throughout the service period, and adhere to strict environmental and safety protocols for waste handling and site restoration upon removal.

General Info

Small business must supply and service ADA-compliant 3-stall restroom trailer per DoD requirements by August 12, 2026.

NAICS

562910 - Remediation Services

Place of Performance

MD

Set-Aside

SBA

Documents

This scope was carved out of N0017426Q1088.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Tent, Chairs, and Restroom Rentals

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Indian Head Division
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply, delivery, setup, and removal of a 12-foot ADA-compliant 3-stall restroom trailer with water, power, and handwashing sink, including waste removal and cleaning services.

More opportunities from Department Of Defense → Nswc Indian Head Division

Same awarding agency

NAICS: 321920
New
Federal
MIL-Spec Wood Crates IAW ASTM D6880/PPP-B-621
Solicitation # N0017427Q0001
The Naval Surface Warfare Center Indian Head Division is soliciting quotes for a firm-fixed-price purchase order to manufacture 1,200 MIL-Spec wood shipping crates, specifically Container Assembly Drawing 1516298 Rev N, measuring approximately 81 x 8 x 8 inches. This procurement is a total small business set-aside under NAICS code 321920. The crates are intended for use in fleet-deliverable Aviation Critical Safety Items and must adhere to strict technical specifications, including ASTM D6880, PPP-B-621, and MIL-STD-129. Delivery is required by November 27, 2026, to the Indian Head, Maryland facility. Award will be based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating both technical specifications and total price, including shipping. To be deemed technically acceptable, offerors must provide documentation of an active CMMC Level 1 Self-Assessment in the Supplier Performance Risk System (SPRS), though separate contract clauses mandate CMMC Level 2 compliance and NIST SP 800-171 R2 adherence for handling Controlled Unclassified Information. Additionally, contractors must maintain an ISO 9001:2015 quality management system and provide a Final Dimensional Inspection Report for each deliverable. Interested parties must request technical drawings via email by November 9, 2026, and provide ITAR certification prior to the release of these documents. Final quote packages, including the company name, point of contact, UEI, and CAGE code, are due by November 12, 2026, at 8:00 AM EST. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system.
Wood Container and Pallet Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332710
Federal
Body, Retainer, and Gasket
Solicitation # N0017426Q1120
The Naval Surface Warfare Center Indian Head Division (NSWC IHD) is soliciting quotes under RFQ N0017426Q1120 for the fabrication, inspection, and delivery of Aviation Critical Safety Items (ACSIs), specifically Delay Bodies, Ignition Device Retainers, and Aluminum Gaskets. This is a total small business set-aside under NAICS code 332710, intended to be awarded as a firm-fixed-price purchase order. The government will utilize a Lowest Price Technically Acceptable (LPTA) basis for award, evaluating quotes based on technical adherence to specifications and total price, including shipping and handling. All deliverables must be delivered FOB Destination to Indian Head, Maryland, with an overall delivery deadline of April 30, 2027. Prospective contractors must meet stringent technical and security requirements. ITAR certification is required to receive technical drawings, which must be requested by October 23, 2026. A critical requirement for technical acceptability is the verification of a current CMMC Level 2 status (Conditional or Final) recorded in the Supplier Performance Risk System (SPRS). Additionally, the contractor must maintain a quality management system adhering to ASQ/ANSI/ISO 9001:2015 and submit an Inspection Test Plan and First Article Testing (FAT) samples where applicable. Quote packages, including the company name, point of contact, UEI, and CAGE code, must be submitted via email by November 6, 2026, at 10:00 AM EST.
Machine Shops

POSTED

21 days ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS