Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ADAPTER,AIR CONDITI

Active
N0038326QPD25Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense through Navsup Weapon Systems Support, seeks quotes for the procurement of ten air conditioning adapters, part number 101-8051-01. The contract requires a 12 month warranty on supplies and adheres to Buy American and Free Trade Agreement standards. Early and incremental deliveries are preferred for this requirement. Prospective bidders must submit quotes via email to the primary point of contact by October 23, 2026. A critical requirement for this award is government source approval; any offeror not already approved must provide the necessary documentation detailed in the NAVSUP WSS Source Approval Brochure along with their proposal to be considered for the award.

General Info

DoD seeks quotes for ten air conditioning adapters by October 23, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTACT INFORMATION|4|N762.47|T38|771-229-3722|abbey.r.ettinger.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X|||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report combo type |N/A|TBD|N00383|TBD|TBD|TBD|TBD|||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 months|60 days after discovery of defect||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| THIS SOLICITATION IS FOR THE FURNISHING OF: ADAPTER,AIR CONDITI NIIN: LLZB3A002 PN: 101-8051-01 QUANTITY: (10) EA PLEASE SUBMIT QUOTE VIA EMAIL TO abbey.r.ettinger.civ@us.navy.mil BY THE DUE DATE SPECIFIED ON PAGE 1, BLOCK 10. THESE ITEMS REQUIRE GOVERNMENT SOURCE APPROVAL PRIOR TO AWARD. IF YOU ARE NOT AN APPROVED SOURCE, YOU MUST SUBMIT, TOGETHER WITH YOUR PROPOSAL, THE INFORMATION DETAILED IN THE NAVSUP WSS SOURCE APPROVAL BROCHURE WHICH CAN BE OBTAINED ONLINE AT https://www.navsup.navy.mil/public/navsup/wss/business_opps/ UNDER "COMMODITIES." OFFERS RECEIVED WHICH FAIL TO PROVIDE ALL DATA REQUIRED BY THE SOURCE APPROVAL BROCHURE WILL NOT BE CONSIDERED FOR AWARD UNDER THIS SOLICITATION. PLEASE NOTE, IF EVALUATION OF A SOURCE APPROVAL REQUEST SUBMITTED HEREUNDER CANNOT BE PROCESSED IN TIME. EARLY AND INCREMENTAL DELIVERIES ARE ACCEPTED AND PREFERRED. \

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
Federal
CANISTER MEMBRANE
Solicitation # SPRMM126QMJ22
This solicitation, issued by DLA Mechanicsburg, seeks quotes for the manufacture and supply of Canister Membranes. The procurement will be awarded based on the Lowest Price Technically Acceptable criteria. Vendors must provide quotes with a validity period of at least 90 days and must identify the Original Equipment Manufacturer and their CAGE code if they are not the manufacturer. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award. The contract requires strict adherence to quality assurance and marking standards, specifically MIL-STD-130. All invoicing and receiving reports must be submitted electronically via the PIEE-WAWF system. Production facility changes are prohibited without written approval from the Contracting Officer and may require a price reduction to cover administrative costs. The government maintains the right to perform inspections to ensure supplies conform to all prescribed requirements.
SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
49--TEST SET SUBASSEMBL, IN REPAIR/MODIFICATION OF
Solicitation # N0010425QNE53
This contract is a solicitation for the repair and manufacture of Test Set Subassemblies for the Department of Defense, specifically under the Navsup Weapon Systems Support Mech. The requirement is issued under Emergency Acquisition Flexibilities and is designated as a DO-rated order for national defense. The scope includes the repair of assets to meet specific operational and functional requirements, with a strong emphasis on adhering to detailed drawing data and quality conformance inspections. Key terms include a requested repair turn around time of 16 days, with financial penalties applied for failure to meet this schedule. The contractor is required to provide an estimated price for the full repair effort and must submit a firm-fixed price quote within 90 to 120 days after receiving the carcasses for evaluation. Additionally, the contract mandates a one-year warranty from the date of delivery and requires that any offeror who is not the original equipment manufacturer provide a signed letter of authorization. All deliverables must comply with MIL-STD packaging and labeling standards, and final acceptance is managed through the Wide Area Workflow payment system.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333998
New
Federal
99--DATA DISTRIBUTION S, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNB19
This solicitation is for the repair and overhaul of four units of National Stock Number 0098 LLZ98S384 (Data Distribution S) to return them to a Ready For Issue condition. The work must be performed according to OEM technical manuals, with the contractor providing all necessary facilities, labor, materials, and tooling. The initial induction period is 365 calendar days from the award date, with a government option to extend this for an additional year. The contractor must provide option pricing for up to 20 units over the total contract period. Key operational requirements include strict adherence to configuration management and quality standards such as ISO 9001 or SAE AS9100. Specific protocols are established for items determined to be Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. The designated repair source is General Dynamics Mission Systems, Inc. in Scottsdale, Arizona. The contract includes a one-year warranty after the date of delivery and mandates compliance with Buy American and Equal Opportunity regulations.
Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
66--LOAD CELL,FORCE-WEIGHT
Solicitation # SPE4A526T470P
DLA Aviation is soliciting quotes for the procurement of 171 force-weight load cells under solicitation number SPE4A526T470P. The items are to be delivered to DLA Distribution Jacksonville within 166 days after the order is placed. This is a total small business set-aside opportunity under NAICS code 333998, with approved sources identified as GEC1784-003, DTD2684-3, and 5D0016-3. The solicitation is being conducted as a Request for Quote and must be submitted electronically by the deadline of October 1, 2026. No hard copies of the solicitation or technical drawings are available. Interested responsible sources should submit their quotes through the specified electronic channels, and inquiries should be directed to the buyer via the DIBBS portal.
DLA Aviation

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
International
Request for Proposal- Preeceville WTP-Major Equipment Supply
Solicitation # 2026B-00003
SaskWater is seeking proposals for the supply, delivery, commissioning, warranty support, maintenance, documentation, and training for major equipment related to Stage 1 of the Highway 9 Regional Water Supply Systems at the Preeceville Water Treatment Plant. The scope of work focuses on the selection and provision of treatment equipment, specifically biological pre-filtration, membrane treatment, and media-based pH adjustment. Proponents must provide details on the systems they represent and include costs for pilot testing if necessary to confirm process guarantees. This solicitation, identified as 2026B-00003, requires responses by October 20, 2026. While the selected proponent will be responsible for the equipment and related services, a separate General Contractor retained by SaskWater will handle the actual installation. Interested parties should direct inquiries to the Saskatchewan Water Corporation procurement office.
Saskatchewan Water Corporation

POSTED

about 19 hours ago

DEADLINE

in 27 days
View Details
NAICS: 333998
New
DIBBS
Laboratory Glassware SupplyThis subcontract under the Department of Defense involves the supply of laboratory glassware for prime contractors supporting the USS MOMSEN DDG 92. The requirement specifies the delivery of six packages of 100ml Griffin Low Form beakers, identified by NSN 6640-01-328-9682, which must be manufactured from borosilicate glass. To ensure product integrity, the beakers must be shipped in sealed unit containers using commercial packaging to prevent breakage and must be marked in accordance with Medical Marking Standard No. 1. The contract falls under NAICS code 333998 and is managed by the Medical Supply Chain MD Surg FSF, with performance taking place at FPO 96672.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, FLUID PRESSU
Solicitation # SPE7M1-26-U-6870
Solicitation SPE7M1-26-U-6870 is a total small business set-aside request for quotations issued by DLA Land and Maritime for the procurement of fluid pressure filter parts kits (NSN 4330-01-465-4276). The government intends to award a unilateral simplified indefinite delivery contract (SIDC) for a one-year period with a maximum value of 350,000.00 USD. The estimated annual demand is 181 kits, with a guaranteed contract minimum of 27 kits and a minimum delivery order quantity of 45 kits. Delivery is required within 95 days after receipt of order, with shipping and inspection terms set as FOB Origin. The contract mandates strict adherence to technical and quality standards, including SAE AS9003 or ISO 9001 for manufacturer inspection systems and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and specific DLA requirements. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific DLA authorizations. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system. Award will be based on the price quoted for the estimated annual demand.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-U-6868
DLA Land and Maritime is soliciting quotes for the procurement of fluid filter elements under NSN 4330014622259. This small business set-aside request may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate total of 350,000.00 dollars. The requirement includes an initial quantity of 96 units, with a guaranteed minimum of 14 units and an estimated two orders per year. Delivery is required within 57 days after the order is placed, with shipments going to various CONUS and OCONUS DLA depots. Approved sources for this procurement include KCZX0, SFPN5, U09S8, and Z1BP5. All quotes must be submitted electronically by the deadline of October 7, 2026. This solicitation is conducted as an RFQ, and interested parties should refer to the electronic documentation via the provided SAM.gov link or the DIBBS portal for full details.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
FILTER BODY, FLUID
Solicitation # SPE7M1-26-U-6872
DLA Land And Maritime is soliciting quotes for the procurement of fluid filter bodies under NSN 4330016809089. This is a total small business set-aside under NAICS code 333998. The initial requirement is for 82 units with a delivery window of 65 days after order. This solicitation may result in an automated Indefinite Delivery Contract with a one year term or a total value ceiling of 350,000.00 dollars. The contract anticipates approximately two orders per year with a guaranteed minimum quantity of 12 units. Deliveries will be made to various CONUS and OCONUS DLA Depots. Interested parties must submit electronic quotes by October 7, 2026, via the specified procurement portal.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-T-368A
This contract is for the procurement of 40 fluid filter elements, specifically part number ACC434F65 manufactured by Pall Aeropower Corporation. The items are designated as critical application components and must comply with FAA airworthiness approval and strict supply chain traceability documentation. Delivery is required within 137 days, with a need date of February 20, 2027, and a final required delivery date of June 25, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Quality assurance is governed by zero-based sampling plans under MIL-STD-1916 or ASQ H1331, with specific verification levels for critical, major, and minor attributes. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract incorporates several technical and quality requirements, including configuration change management and FAA bare item marking, ensuring the components meet all federal aviation and defense standards.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M0-26-T-097K
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
VIAL, SCREW TOP, MULTIPU
Solicitation # SPE2DH-26-T-6830
Solicitation SPE2DH-26-T-6830 is a Request for Quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of multipurpose screw-top vials. The required items are 40 ml pre-assembled clear glass vials with phenolic hole caps, measuring 29 mm by 82 mm. The government is seeking a total quantity of 2 packages, with each package containing 100 units. Bidders are required to specify the source and part number being supplied and must provide a complete data package if offering an alternate part. Delivery is required within 20 days after order, with the shipping destination designated as Vandenberg AFB, California, under FOB Destination Other terms. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E, special packaging instructions MPPW00001, and Medical Marking Standard No. 1. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation also incorporates various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and cybersecurity safeguarding of covered defense information. Quotations were due by September 22, 2026, and should be submitted to the issuing office in Philadelphia, Pennsylvania.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 811210
New
Federal
61--DISTRIBUTING SYSTEM, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNB42
This presolicitation under number N0038326QNB42 is for the repair or modification of a distributing system, specifically NSN 7R-6150-015591184-H1, with a quantity of three units delivered FOB Origin. Due to the flight critical nature of the item and a lack of sufficient technical data for open competition, the government requires source approval prior to contract award. Only previously approved sources have been solicited, though new applicants may apply by submitting the required documentation detailed in the NAVSUP Weapon Systems Support Source Approval Information Brochures. The solicitation is managed by the Department of Defense through the Navsup Weapon Systems Support office in Philadelphia. Proposals must be submitted by November 9, 2026. Because the government is not utilizing FAR Part 12 for commercial item acquisition, interested parties must notify the contracting officer within 15 days if they can satisfy the requirement with a commercial item. Failure to provide all necessary source approval data will result in the proposal not being considered for award.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--TURRET FLIR UNIT, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RNB10
This solicitation from Navsup Weapon Systems Support is for the repair and overhaul of 40 Turret FLIR Units (NSN 1680 016715197) to return them to a Ready For Issue condition. The contractor is responsible for providing all necessary labor, materials, and tooling, with a specific prohibition against using MIL-W-81381 wire in favor of SAE-AS22759 series wire. The initial induction period is 365 calendar days from the award date, with a government option to extend this for an additional year. The contractor must also provide option pricing for up to 80 total units over the life of the contract. Key operational requirements include strict adherence to ISO 9001/SAE AS9100 quality standards and ANSI/NCSL Z540.3 calibration systems. Specific protocols are established for items determined to be Beyond Economical Repair (BER), Missing on Induction (MOI), or requiring Over and Above Repair (OAR), all of which require written concurrence from DCMA and the Procuring Contracting Officer. The work is designated to be performed by FLIR Systems, Inc. in Wilsonville, Oregon, and includes a one-year warranty on supplies of a noncomplex nature.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
Federal
59--MOUNTING BASE,ELECT, IN REPAIR/MODIFICATION OF
Solicitation # N0038325QD175
This solicitation, issued by Navsup Weapon Systems Support, seeks a contractor to perform the repair, overhaul, and testing of electrical mounting bases (NSN 5975013980446). The total quantity for the requirement has been increased to 13 units, with a proposal due date of May 8, 2026, and a final offer deadline of October 20, 2026. The contractor is responsible for providing all necessary labor, materials, and tooling to return assets to a Ready For Issue condition, with a required repair turnaround time of 235 days after receipt of the asset. Key contractual obligations include adhering to the latest technical publications and maintaining a quality system compliant with ISO 9001 or SAE AS9100. The contract establishes specific protocols for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from DCMA and the Procuring Contracting Officer. Work is designated to be performed by Raytheon at their Indianapolis facility, and the induction expiration date is set for 365 days after the contract award.
Machine Shops

POSTED

about 4 hours ago

DEADLINE

in 27 days
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNA93
This solicitation from Navsup Weapon Systems Support is for the repair of three units of Circuit Card Assemblies, identified by National Stock Number 5998 016470062. The contract includes an initial induction period of 365 calendar days, with a government option to extend this for an additional year. Contractors must provide pricing for the initial units and option pricing for up to 10 units over the total contract period. The work will be performed by Simmonds Precision Products in Vergennes, Vermont, and requires adherence to strict quality standards, including ISO 9001 or SAE AS9100, and calibration systems meeting ANSI/NCSL Z540.3 or ISO-10012-1. The scope of work involves returning units to a Ready For Issue condition through overhaul, upgrade, or repair. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 series wire and compliance with IPC/EIAJ-STD-001C for personnel. The contract establishes specific protocols for Beyond Economical Repair (BER) determinations, Missing on Induction (MOI) components, and Over and Above Repair (OAR) efforts, all of which require written concurrence from the government. Additionally, the contractor is responsible for providing all necessary tooling and materials, with a strict prohibition on part cannibalization unless specifically approved by the PCO.
Bare Printed Circuit Board Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
15--DOOR,AIRCRAFT
Solicitation # N0038326QTC97
This presolicitation notice from the Navsup Weapon Systems Support under the Department of Defense is for the procurement of five aircraft doors, identified by NSN 1R-1560-015532997-V2 and reference number 901-031-644-101. The delivery terms are set as FOB Origin, and the government prefers early or incremental deliveries. Contractual documents are considered issued upon being sent via mail, facsimile, or electronic methods. The government intends to solicit this requirement from a single source under FAR 6.302-1, though it is allowing other responsible sources to submit capability statements or proposals within 45 days of publication. The final decision to compete the contract remains at the government's discretion. This acquisition may be subject to the Buy American Act and various Free Trade Agreements, including the World Trade Organization Government Procurement Agreement.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
Repair of NIIN 016815999; NOMEN: DISPLAY UNIT,FLIGHT
Solicitation # N0038327QF093
NAVSUP Weapon Systems Support Philadelphia intends to solicit a sole source contract with Lockheed Martin for the repair of one flight display unit, part number 343A564-1 and NSN 7R6610016815999. This procurement is being conducted under NAICS code 334511 and FSC 6610. The government has determined that Lockheed Martin is the only responsible source capable of satisfying the requirement because the government does not own the necessary technical data or drawings to utilize other providers. The acquisition will follow the procedures prescribed in FAR Part 15, and the government will not use FAR Part 12 commercial item policies. While this is a sole source intent, other interested organizations may submit capability statements or quotations within six days of the synopsis to determine if a competitive repair is feasible. Any firm not already approved to manufacture this material must submit a Source Approval Request, though the repair process will not be delayed for such approvals. All communications and submissions must be handled electronically via the specified point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
16--NRP,CYLINDER,ACTUAT, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QSC38
This presolicitation, identified by solicitation number N0038326QSC38, is issued by the Department of Defense through the Navsup Weapon Systems Support office located in Philadelphia, Pennsylvania. The contract focuses on the repair and modification of actuation cylinders, specifically referencing NSN 7R-1650-016221417-QF and TDP VER 001. The requirement is for a total quantity of 30 units with delivery terms set as FOB Origin. Interested parties must submit their responses by the deadline of November 9, 2026. Sarah L. Austin serves as the primary point of contact for this procurement action.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 4 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--LINK ASSEMBLY FORWA
Solicitation # N0038326QNA72
This solicitation, issued by Navsup Weapon Systems Support under solicitation number N0038326QNA72, is for the repair of 40 units of National Stock Number 1680 014550571 as part of a Foreign Military Sales spare requirement. The contract includes an initial induction period of 365 calendar days from the date of award, with a government option to extend this period for an additional year. Contractors must provide pricing for the initial units and option pricing for a maximum of 80 units over the total contract duration. The agreement mandates a one-year warranty on supplies after the delivery date and requires compliance with Buy American and Free Trade Agreements. Payment will be processed via Wide Area Workflow, and the total contract value for threshold purposes will be determined by the highest proposed unit price multiplied by the maximum number of units. The response deadline for this requirement is October 23, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--NRP,ANTENNA ASSEMBL
Solicitation # N00383-26-Q-PC89
Solicitation N00383-26-Q-PC89, issued by NAVSUP Weapon Systems Support Philadelphia on September 4, 2026, seeks quotes for the furnishing of an NRP antenna assembly, identified by NSN 5841-01-660-2958. The requirement specifies that the item be made to 78286 in accordance with 001-008716-0001 and requires the contractor to maintain ISO9001 Quality Management Systems compliance. The solicitation is open for responses until October 5, 2026, and is designated as other than small business. Government source approval is required prior to award, and offerors must submit necessary documentation if they are not already approved sources. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS), and offerors without relevant experience will be considered ineligible. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129, with specific requirements for electrostatic discharge protection and DLR labeling where applicable. Invoicing and payment will be processed electronically through the Wide Area Workflow (WAWF) system. Inspection and final acceptance of the supplies will occur at the contractor's location.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
61--DISTRIBUTING SYSTEM, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNB41
This presolicitation under number N0038326QNB41 is for the procurement of two units of NSN 7R-6150-015554509-ZR, delivered FOB Origin. The requirement is managed by the Navsup Weapon Systems Support office in Philadelphia. Because the item is flight critical and the government lacks sufficient technical data to support full and open competition, the contract requires government source approval prior to award. Only previously approved sources have been solicited, though new sources may apply by submitting the required documentation detailed in the NAVSUP WSS Source Approval Information Brochures. Offers that fail to provide the necessary source approval data or proof of a pending request will not be considered for award. The government is not utilizing FAR Part 12 policies for commercial items, although interested parties may notify the contracting officer of their ability to provide a commercial alternative within 15 days of the notice. Technical specifications and standards can be obtained via the DODSSP or ASSIST-Online, and the response deadline for this opportunity is November 9, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--ACTUATOR,ELECTROMEC, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QQB39
This repair purchase order, issued by Navsup Weapon Systems Support, authorizes the repair and modification of Electromechanical Actuators (P/N 7RH 1680 014183151 V2) to return them to a Ready For Issue condition. The Boeing Company in Ridley Park, Pennsylvania, is designated as the repair source. The contractor is responsible for providing all necessary labor, materials, and test equipment, ensuring that all work adheres to current engineering drawings and industry standards. A one-year warranty is provided for supplies of a noncomplex nature, with a 45-day window for reporting defects. Key operational requirements include a 100% repair rate for all carcasses, with specific protocols for items determined to be Beyond Economical Repair (BER) or Missing on Induction (MOI), both of which require DCMA and PCO approval. The contractor must maintain a quality management system compliant with ISO 9001 or SAE AS9100 and adhere to strict configuration management and marking standards. Additionally, the use of MIL-W-81381 wire is prohibited, requiring the use of SAE-AS22759 series wire instead. All repairs must be documented through detailed historical record files and are subject to Government quality assurance testing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
66--VOLTMETER
Solicitation # N0038326QHA88
This solicitation, issued by the Navsup Weapon Systems Support under the Department of Defense, is a requirement for spare voltmeters identified by NSN LRM 6625 014793608. The procurement falls under NAICS code 334412 and is managed by the office located in Philadelphia, Pennsylvania. The contract emphasizes compliance with Buy American and Balance of Payments program certifications, as well as adherence to security prohibitions and equal opportunity requirements for workers with disabilities. The government prefers early and incremental deliveries and utilizes Wide Area Workflow for payment instructions. All contractual documents are considered issued upon transmission via mail, facsimile, or electronic commerce methods. Interested parties must respond by the deadline of October 23, 2026, with the primary point of contact being Jose F. Montes.
Bare Printed Circuit Board Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS