Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ADAPTER, CYLINDER COMPR

Active
SPE7L3-26-T-144XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two units of an Adapter, Cylinder Compression Tester, identified by NSN 4910012403101 and part numbers ATCL-TU-15-12 and TU-15-12A, sourced from Apex Machine Tool Company, Inc. and Star Products. Delivery is required within 136 days from the contract award, with shipment FOB origin and no tolerance for quantity variance—precisely two units must be delivered. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrismann Road, Tracy, CA 95304-5000. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including marking and labeling per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). The unit of issue is each, with a total contract value based on a unit price of $1 per item. The shipment must arrive no later than December 28, 2026, and transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation number is SPE7L3-26-T-144X, issued on August 2, 2026, with responses due by August 13, 2026, under a federal procurement managed by the Department of Defense's Land Supplier Operations Vehicle Support.

General Info

Two Adapter Cylinder Compression Testers, $1 each, due December 28, 2026, FOB origin, DLA compliance mandatory.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-144X for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Matthew Curry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ADAPTER,CYLINDER COMPRESSION TESTER
TESTER, COMPRESSION.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
APEX MACHINE TOOL COMPANY, INC. 63807 P/N ATCL-TU-15-12
STAR PRODUCTS 4N1Z9 P/N TU-15-12A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697806 0001 EA 2.000
NSN/MATERIAL:4910012403101
DELIVERY (IN DAYS):0136
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129.
SPE7L3-26-T-144X
SECTION B
PR: 7017697806 PRLI: 0001 CONT’D
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/28/2026 Original Required Delivery Date:12/28/2026
SPE7L3-26-T-144X NSN/Part Number: 4910-01-240-3101 Quantity: 2 EA Purchase Request: 7017697806QTY: 2 Delivery: 136 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11CD
The contract pertains to the procurement of 10 units of LEAD, ELECTRICAL with NSN 6150-00-930-2334 under solicitation SPE4A6-26-T-11CD, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, which incorporates referenced standards such as MIL-STD-1916 or ASQ H1331 for sampling and inspection, with zero non-conformances required unless otherwise specified. Attributes are assigned verification levels or AQLs based on criticality, and unspecified attributes are treated as major. Physical identification and marking of the item must comply with RQ017 requirements, and the product contains technical data subject to export controls under ITAR or EAR, restricting disclosure to unauthorized foreign persons regardless of location. Access to this controlled data is limited to contractors with approved JCP certification, completion of mandatory DLA export control training, and formal authorization. The contract includes adherence to DFARS 252.225-7048, and all technical and quality provisions are binding as specified in the DLA master documents referenced.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11CC
This contract is for the procurement of two special-purpose electrical cable assemblies with part numbers 29-245-12 and 36-170-112-1, identified by NSN 6150-01-065-4810, sourced from CELTECH CORP. The items are classified as critical application components and must comply with stringent cybersecurity requirements, including CMMC Level 2 Self-Assessment and handling of covered defense information. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with referenced controls including configuration change management, variance requests, and physical identification per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be verified at designated levels corresponding to critical, major, and minor classifications. Packaging must adhere to MIL-STD-2073-1E and marking per MIL-STD-129 with no special marking code applied. Palletization follows DLA packaging requirements, and units must be delivered FOB origin within 38 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is under solicitation SPE4A6-26-T-11CC with a required delivery date of September 18, 2026, and was posted on August 2, 2026, with a response deadline of August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-Q-0206
This contract pertains to the procurement of a single rotary switch with NSN 5930-01-199-6981, requiring delivery within 90 days of award. The solicitation is issued under SPE7M8-26-Q-0206 with a response deadline of August 15, 2026, and is managed by the Department of Defense’s Electrical Devices Division. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment adopts a later revision. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with limited exceptions for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents approved by NAVSEA. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary per NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, and all government identification must be removed from non-accepted supplies. The point of contact for the solicitation is Kitnarone Phengthongsavath, reachable via email and phone, and the contract is accessible through the DIBBS platform.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11FQ
The contract is for a single cable assembly identified by NSN 5995-01-606-4376, with a required delivery within 20 days after award. It is governed by strict technical and quality requirements referenced from the DLA Master List, with compliance tied to the version in effect on the solicitation or award date. The item is subject to cybersecurity compliance under CMMC Level 2, meaning the provider must be a certified third-party assessment organization. Covered Defense Information applies, and all packaging must adhere to DLA standards. Although Item Unique Identification is waived per the service customer’s request, federal regulations governing the removal of government identification from non-accepted supplies remain active. The technical data associated with this cable assembly is subject to U.S. export controls under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and prior approval from DLA. The solicitation, issued under SPE4A6-26-T-11FQ on August 2, 2026, requires responses by August 10, 2026, and is procured by the Department of Defense’s ASC Commodities Division, with performance designated at Cherry Point, North Carolina. The primary point of contact is Thanh Hue Nguyen, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11HA
The contract pertains to a special-purpose electrical cable assembly identified by NSN 6150-01-555-9768, with a quantity of 60 units, to be delivered within 158 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance with these specifications is mandatory. The item is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons anywhere in the world, including foreign nationals employed by U.S. entities. Access to such data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DOD training on export-controlled data handling, and prior authorization from DLA. Packaging must adhere to DLA-specific procurement standards, and government identification must be removed from any non-accepted supplies. Although Item Unique Identification is not required per the service customer’s request, DFARS 252.211-7003(c)(1)(i) remains applicable. The contractor must hold CMMC Level 2 certification as a C3PAO and meet all documentation and source approval requirements outlined in the contract. The solicitation, numbered SPE4A6-26-T-11HA, was posted on August 2, 2026, with responses due by August 10, 2026. It is classified under NAICS code 334419, administered by the Department of Defense’s ASC Commodities Division, with performance location in New Cumberland, Pennsylvania, and a ZIP code of 17070-5002. Primary point of contact is Ernest Penrose, reachable via phone and email provided in the contract data. This solicitation is for a federal acquisition and does not specify a small business set-aside. All contractors must comply with cybersecurity, export control, packaging, and documentation mandates before award, and failure to meet these stringent regulatory conditions will result in disqualification.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CE
This contract specifies the procurement of a special-purpose electrical cable assembly under solicitation SPE4A6-26-T-11CE, with a required delivery of seven units within 193 days from award, delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 5995-01-572-6924 and part number N1912-61017 from Keysight Technologies Inc, with a unit price of $7.00 and zero tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, with specific preservation methods including dry preservation and E5 unit containers. No mercury or mercury-containing compounds may be introduced into the product, its packaging, or associated materials except for limited functional uses explicitly authorized by NAVSEA, and portable devices containing mercury must include a secondary containment barrier. Quality assurance requires zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contractor must adhere to DLA’s master list of technical and quality requirements referenced by R and I numbers, and comply with CMMC Level 2 cybersecurity self-assessment requirements. Physical identification of the bare item is mandatory, and all procedures must align with DLA’s packaging and transportation directives, including the prohibition of mercury in preservation and marking materials as per IP056.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EK
This contract pertains to the procurement of a cable assembly specified under solicitation SPE4A6-26-T-11EK, with the NSN 5995-01-546-8557 and part number 20002506-10, requiring 26 units to be delivered FOB origin within 125 days by December 14, 2026. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging requirements per MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere precisely to Drawing 20002506 and SPI P20002506-10 Revision A dated September 30, 2025, and first article testing for packaging is mandatory, requiring three packaged units to be inspected with documentation, photographs, and certification included in the test report. Production lot testing provisions are also referenced if applicable. The contract enforces strict compliance with cybersecurity standards, requiring a CMMC Level 2 Self-Assessment, and prohibits the intentional inclusion of mercury or mercury compounds in the product except for specific functional exemptions outlined by NAVSEA, with additional containment requirements for portable devices containing mercury. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. Inspection and acceptance occur at origin, with no variance permitted in quantity. Configuration change management and source approval documentation are required, and all shipments must be palletized in accordance with DLA packaging directives and delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must provide full documentation for deviations, waivers, and compliance certifications, with all contractual obligations tied to the DLA procurement framework and authorized units of issue.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11CW
The contract pertains to the procurement of six units of lead electrical material identified by NSN 6150-99-852-0619 and part number G406/8745, supplied by KNDS DEFENCE UK LIMITED. Delivery is required within five days of award, with shipment originating at the supplier’s location under FOB origin terms and a strict zero variance allowance on quantity. Inspection and acceptance occur at the destination, specifically at the DLA LMP Zone 1 facility in Texarkana, Texas. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required; palletization follows DLA packaging standards. The item is designated as a critical application with no shelf life, and sampling for quality assurance must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan where non-conformances are not permitted unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revision control tied to the solicitation or award date depending on acquisition size. Shipping must be conducted via the fastest traceable means, explicitly excluding parcel post, and all documentation references the assigned contract SPE4A6-26-T-11CW with a required delivery date of July 15, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EE
This contract pertains to a special-purpose electrical cable assembly with stringent technical, quality, and compliance requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and applicable revisions are determined by the solicitation or award date depending on acquisition size. The item is source controlled, meaning it must be manufactured and tested using limited rights data accessible only to qualified vendors who can demonstrate traceability to approved sources; only those with access to this data or the ability to conform to its specifications may submit quotes, and a SAR package is mandatory for any entity seeking source approval. The assembly must comply with DLA packaging standards, removal of government identification from rejected items, and physical marking requirements. Cybersecurity compliance mandates CMMC Level 2 certification via an accredited third-party assessment organization. The item is subject to stringent export controls under ITAR or EAR, restricting technical data disclosure to foreign persons both inside and outside the U.S., and access is limited to contractors with JCP certification, completed DOD export control training, and formal DLA approval. Mercury and mercury-containing compounds are strictly prohibited unless used in exempted functional applications like batteries, fluorescent lights, or specified instruments, and any portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels based on criticality. The NSN 6150-01-258-3719 requires 13 units to be delivered within 54 days of award, with the solicitation issued on August 2, 2026, and responses due by August 10, 2026, under contract number SPE4A6-26-T-11EE, managed by the DLA Commdities Division, with primary point of contact at Ashley Sheppard.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11EQ
This contract pertains to the procurement of LEAD, ELECTRICAL, identified by NSN 6150016191083 and part number A034F322 from CUMMINS POWER GENERATION INC., with a total quantity of 16 units to be delivered under solicitation SPE4A6-26-T-11EQ. The item is subject to strict technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stated, and attributes are assigned verification levels or AQLs based on their classification. Deliveries must be made FOB origin within 157 days of contract award to the designated DLA Distribution Depot at Hill AFB, Utah, with no variance allowed in quantity. All packaging and palletization must comply with DLA’s proprietary packaging requirements, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract specifies a unit price of $16.00, resulting in a total value of $256.00, and requires compliance with DoD unit of issue standards. The point of contact for inquiries is Chinh Le, with the response deadline having passed on August 10, 2026, and the original delivery date set for January 15, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L1-26-T-904Y
The contract pertains to the procurement of a single unit of a wiring harness with NSN 6150-01-578-2113 and part number 3444019, issued under solicitation SPE7L1-26-T-904Y by the Department of Defense’s Land Supply Chain. Delivery is requested within five days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. The shipment must be delivered via traceable freight, excluding parcel post, to the specified military address at Fort Benning, Georgia. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and must comply with all applicable DLA technical and quality standards referenced via the DLA Master List. Government identification must be removed from non-accepted supplies, and the contract includes specific tracking identifiers, project codes, and delivery instructions for government use only.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 336330
New
DIBBS
WHEEL, SOLID RUBBER TIR
Solicitation # SPE7L3-26-T-143W
This contract specifies the procurement of a solid rubber tire wheel identified by NSN 2530-01-738-5293 and part number 24003207, supplied by GM DEFENSE LLC and CUSTOM WHEEL SOLUTIONS LLC, with a requirement for seven units to be delivered within 75 days under solicitation SPE7L3-26-T-143W. The item is classified as a critical application item with a non-extendable shelf life of 120 months, and it is subject to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including special labeling for Type I shelf life. All deliveries must be FOB origin, inspected and accepted at destination, and packaged according to DLA’s packaging requirements, with no ozone-depleting chemicals permitted under any circumstances, requiring prior approval for alternative chemicals. The contract enforces a zero variance in quantity and mandates compliance with DLA procedural notes for transportation and shipping, with all units directed to the DDSP New Cumberland facility in Pennsylvania. The procurement is a total small business set-aside under NAICS code 336330, with a unit price of $7.00, totaling $49.00, and is part of a federal acquisition managed by the Department of Defense’s Land Supplier Operations Vehicle Support office. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the required delivery date is October 30, 2026. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions effective as of the solicitation issue date. The point of contact for inquiries is Karen McCarley, and all logistics must align with the provided DLA directives including parcel post and freight shipping addresses.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144G
The contract pertains to the procurement of gaskets with part number 89774 and NSN 5330-00-911-3574, requiring a quantity of 240 units to be delivered within 158 days after award. All supplied items must be completely free of asbestos, and any alternative materials or substitutions must adhere to the approval guidelines specified in Clause L30 and Provision 4. The technical and quality requirements governing this procurement are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The solicitation number is SPE7L3-26-T-144G, issued on August 2, 2026, with responses due by August 13, 2026. The contracting organization is the Department of Defense, under the Land Supplier Operations Vehicle Support, with performance located in New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Susan Diamond, reachable via email or phone. The NAICS code associated with this procurement is 339991, and the supplier is Mine Safety Appliances Co located in Pittsburgh, PA.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336211
New
DIBBS
ARMOR, TRANSPARENT, VEHI
Solicitation # SPE7L3-26-T-143V
This contract pertains to the procurement of armor, transparent vehicular window units identified by NSN 2541-01-337-2114 and part number DNC-23529-3, with a total quantity of 114 units to be delivered FOB origin within 107 days of contract award, with no tolerance for quantity variance. Delivery is mandated to the DLA Distribution facility in New Cumberland, Pennsylvania, and must comply with MIL-STD-2073-1E preservation standards and MIL-STD-129 marking requirements, including the special fragile marking code 36 indicating glass and directional handling. Packaging must adhere to DLA packaging requirements and prohibit the use of mercury or mercury compounds in preservation, packaging, and marking, with exceptions only for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and even then, portable devices must include secondary containment per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitutes require prior approval unless explicitly authorized by specifications. The contractor, Daimler Truck North America LLC, is required to perform a CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. All items must meet federal procurement standards, with inspection and acceptance occurring at the destination, and the contract is subject to DoD shipping protocols as outlined in DLAD Proc Notes C19 and C20.
Motor Vehicle Body Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145D
The contract solicitation for GASKET under solicitation number SPE7L3-26-T-145D requires the supply of 27 units identified by NSN 5330-01-720-6786 with a delivery deadline of 5 days after delivery order issuance. All items must be free of asbestos, and any alternative materials must adhere to the approval processes outlined in Clause L30 and Provision 4. The gaskets must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation as specified for Federal Supply Classifications 5330/5331. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications identified with R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and any government identification on non-accepted supplies must be removed. The contract also indicates that Covered Defense Information may apply, requiring adherence to relevant security protocols. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and performance is to be delivered to Norfolk, Virginia. Point of contact is Lee Miller of the Department of Defense, Land Supplier Operations Vehicle Support.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7L3-26-T-143X
The contract is for the procurement of 155 units of a hydraulic cylinder assembly identified by NSN 3040-01-454-3533 and part number A23280Q9819, supplied by Meritor Industrial Products, LLC, for use on Model 1000M forklift trucks. The item is priced at $155.00 per unit, with a total contract value of $24,025.00, and must be delivered FOB origin within 336 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence of the DLA Master List of Technical and Quality Requirements. Packaging and palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is each. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the required ship date is July 16, 2027. Transportation logistics follow DLA Procurement Notes C19 and C20. This is a total small business set-aside solicitation under NAICS code 333613, issued by the Department of Defense under contract number SPE7L3-26-T-143X, with a response deadline of August 13, 2026. All technical and quality specifications referenced via R and I numbers are governed by the DLA Master List, with revisions controlled according to acquisition scale and amendment dates.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-T-144V
This procurement under solicitation SPE7L3-26-T-144V requires the delivery of three units of item 11610607 for first article testing within 180 calendar days of contract award to a designated government facility at Tinker Air Force Base. The government will conduct formal testing and issue written approval, conditional approval, or disapproval within 180 days of receiving the units; these first article samples will not count toward the total production quantity and will be retained by the government for potential use as a manufacturing standard or destroyed during testing. The contractor must deliver the full ordered quantity separately. Bidders are strongly encouraged to quote using quantity ranges due to fluctuating demand, though this flexibility does not extend to Auto IDC. Offers must not include covered telecommunications equipment or services as prohibited by FAR 52.204-24 and DFARS 252.204-7016. Compliance with domestic sourcing restrictions under the Berry Amendment and Buy American Act is mandatory, with thresholds lowered to $150,000; non-domestic material disclosures are required. Small business joint ventures must submit applicable certifications as outlined in FAR provisions. The vendor shipment module access is transitioning to DLA’s AMPS system, and contractors must register through AMPS to maintain shipping capabilities; schema updates are required for VSM WebServices users. Additive manufacturing is currently prohibited unless specifically approved by the contracting officer. The contract involves a single line item for 142 units with a 922-day delivery window, and all proposals must be submitted via DIBBS before the deadline. Offerors who cannot respond must file a “No Bid” notice to avoid assumptions of non-responsiveness.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L3-26-U-0666
The contract pertains to the procurement of CLIP, RETAINING with NSN 5340-00-675-2101 and part number 55008, under solicitation SPE7L3-26-U-0666, for a quantity of 161 units at a unit price of $161.00, totaling $25,921.00. Delivery is required within 116 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Palletization must follow DLA’s procurement packaging requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract specifies DLA Direct, CONUS coverage. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, under NAICS code 332722, managed by the Department of Defense’s Land Supplier Operations Vehicle Support. The primary point of contact is Stephen Weaver, reachable via email and phone. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List accessible through the designated website, with revision control determined by the solicitation or award date depending on acquisition size. Delivery is not guaranteed as the quantity is estimated and may not be fully purchased by the IDC. All packaging, labeling, and unit of issue must strictly align with contract specifications and DLA directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
REFILL BLADE, WIPER
Solicitation # SPE7L3-26-T-144P
This contract specifies the procurement of wiper blade refills under the NSN 2540014540415, with a total quantity of 264 units to be delivered FOB origin within 78 days of contract award. The items must comply with DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129, with individual commercial skin packs acceptable as the unit packaging method. No ozone-depleting chemicals are permitted in the manufacture or incorporation of these items, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contract identifies specific approved part numbers from Trico Products Corporation, AMZ Alabama Inc., and BAE Systems Tactical Vehicle Systems LP, all corresponding to the same NSN. Delivery is directed to the DLA Distribution center in New Cumberland, Pennsylvania, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and all shipments must adhere to DLA transport and freight protocols outlined in procedural notes C19 and C20. The solicitation number is SPE7L3-26-T-144P, issued by the Department of Defense’s Land Supplier Operations Vehicle Support office, with a response deadline of August 13, 2026, and a posted date of August 2, 2026. The NAICS code 336390 identifies the classification as Other Transportation Equipment Manufacturing. The primary point of contact is Amber Rohly, reachable via email and phone provided. Packaging must be palletized in accordance with DLA requirements, and the special marking code indicates no additional special markings are required. The original required delivery date is December 17, 2025, with a need ship date of December 9, 2025, aligning with the 78-day delivery window. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements govern performance unless modified by solicitation amendment, and simplified acquisition rules apply with the Master List revision in effect on the solicitation issue date controlling compliance.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145C
This contract, under solicitation number SPE7L3-26-T-145C, requires the delivery of two gaskets with NSN 5330-01-714-2809 and part number PG775000-31 at a unit price of $2.00, totaling $4.00. The items must be delivered within 20 days to Moody AFB, Georgia, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination. All packaging must comply with MIL-STD-2073-1E, including specific materials and methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 without special codes. The gaskets must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. Hazardous materials packaging rules apply, and parcel post is prohibited; shipments must use the fastest traceable means. The delivery must meet the original required date of July 16, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support, with Lee Miller as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144L
The contract pertains to the procurement of gaskets identified by NSN 5330-01-597-1378, with a total requirement of 6 units, under purchase request 7017602136, and an additional quantity of 30 units referenced in the context of a broader procurement action. Delivery must be completed within 58 days after award. The item is subject to strict packaging requirements mandating medium duty, waterproof, greaseproof, and opaque packaging in compliance with MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, with previously approved asbestos-containing codes or part numbers now rejected unless replaced by an approved alternative under Clause L30 and Provision 4 conditions. The gasket is manually excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size, and covered defense information provisions may apply. The solicitation, issued under SPE7L3-26-T-144L on August 2, 2026, with a response deadline of August 13, 2026, is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance location specified as Albany, Georgia, 31704-1128, and primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 6146925625.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-144Y
This contract specifies the procurement of a single helical compression spring with NSN 5360-01-625-7141 under solicitation SPE7L3-26-T-144Y, with a delivery requirement of 20 days after award. The technical and quality requirements governing this item are defined by referenced DLA Master List documents identified by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The contractor must comply with DLA packaging standards, retain supply chain traceability documentation as mandated by DLAD Procurement Notes C03 from August 2016, and ensure removal of government identification from non-accepted supplies. The item must be free of asbestos and must not contain any ozone-depleting chemicals; any substitutes must be approved unless explicitly authorized by the specification. Documentation for source approval must be submitted, and all material and process substitutions are subject to approval under Clause L30 and Provision 4 conditions. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support agency, with point of contact Lee Miller, and the place of performance is FPO with ZIP 09591. Responses are due by August 13, 2026, and the solicitation was posted on August 2, 2026.
Other Support Activities for Air Transportation

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details