Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

LEAD, ELECTRICAL

Active
SPE4A6-26-T-11CWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of six units of lead electrical material identified by NSN 6150-99-852-0619 and part number G406/8745, supplied by KNDS DEFENCE UK LIMITED. Delivery is required within five days of award, with shipment originating at the supplier’s location under FOB origin terms and a strict zero variance allowance on quantity. Inspection and acceptance occur at the destination, specifically at the DLA LMP Zone 1 facility in Texarkana, Texas. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required; palletization follows DLA packaging standards. The item is designated as a critical application with no shelf life, and sampling for quality assurance must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan where non-conformances are not permitted unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revision control tied to the solicitation or award date depending on acquisition size. Shipping must be conducted via the fastest traceable means, explicitly excluding parcel post, and all documentation references the assigned contract SPE4A6-26-T-11CW with a required delivery date of July 15, 2026.

General Info

Six lead electrical units, NSN 6150-99-852-0619, delivered by July 15, 2026, FOB origin, zero variance, strict quality standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

7TH STREET H AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11CW.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Shalon Bond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
LEAD,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
KNDS DEFENCE UK LIMITED K7705 P/N G406/8745
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-11CW
SECTION B
PR: 7017493651 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017493651 0001 EA 6.000
NSN/MATERIAL:6150998520619
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W45G18
W0MC STK REC ACCT DEPOT REDRVR
DLA LMP ZONE 1 BLDG 552 NORTH
7TH STREET H AVENUE
TEXARKANA TX 75507-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W45G18
W0MC STK REC ACCT DEPOT REDRVR
DLA LMP ZONE 1 BLDG 552 NORTH
7TH STREET H AVENUE
TEXARKANA TX 75507-5000
US
MARKFOR
W45G18
W0MC STK REC ACCT DEPOT REDRVR
DLA LMP ZONE 1 BLDG 552 NORTH
7TH STREET H AVENUE
TEXARKANA TX 75507-5000
US
M/F: (TCN) W45G18619100IV
RDD: 238
PROJ: TP 1
SPE4A6-26-T-11CW
SECTION B
PR: 7017493651 PRLI: 0001 CONT’D
SUPP ADD: W45G18 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VH
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE4A6-26-T-11CW NSN/Part Number: 6150-99-852-0619 Quantity: 6 EA Purchase Request: 7017493651QTY: 6 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11CD
The contract pertains to the procurement of 10 units of LEAD, ELECTRICAL with NSN 6150-00-930-2334 under solicitation SPE4A6-26-T-11CD, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, which incorporates referenced standards such as MIL-STD-1916 or ASQ H1331 for sampling and inspection, with zero non-conformances required unless otherwise specified. Attributes are assigned verification levels or AQLs based on criticality, and unspecified attributes are treated as major. Physical identification and marking of the item must comply with RQ017 requirements, and the product contains technical data subject to export controls under ITAR or EAR, restricting disclosure to unauthorized foreign persons regardless of location. Access to this controlled data is limited to contractors with approved JCP certification, completion of mandatory DLA export control training, and formal authorization. The contract includes adherence to DFARS 252.225-7048, and all technical and quality provisions are binding as specified in the DLA master documents referenced.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11CC
This contract is for the procurement of two special-purpose electrical cable assemblies with part numbers 29-245-12 and 36-170-112-1, identified by NSN 6150-01-065-4810, sourced from CELTECH CORP. The items are classified as critical application components and must comply with stringent cybersecurity requirements, including CMMC Level 2 Self-Assessment and handling of covered defense information. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with referenced controls including configuration change management, variance requests, and physical identification per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be verified at designated levels corresponding to critical, major, and minor classifications. Packaging must adhere to MIL-STD-2073-1E and marking per MIL-STD-129 with no special marking code applied. Palletization follows DLA packaging requirements, and units must be delivered FOB origin within 38 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is under solicitation SPE4A6-26-T-11CC with a required delivery date of September 18, 2026, and was posted on August 2, 2026, with a response deadline of August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-Q-0206
This contract pertains to the procurement of a single rotary switch with NSN 5930-01-199-6981, requiring delivery within 90 days of award. The solicitation is issued under SPE7M8-26-Q-0206 with a response deadline of August 15, 2026, and is managed by the Department of Defense’s Electrical Devices Division. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment adopts a later revision. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with limited exceptions for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents approved by NAVSEA. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary per NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, and all government identification must be removed from non-accepted supplies. The point of contact for the solicitation is Kitnarone Phengthongsavath, reachable via email and phone, and the contract is accessible through the DIBBS platform.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11FQ
The contract is for a single cable assembly identified by NSN 5995-01-606-4376, with a required delivery within 20 days after award. It is governed by strict technical and quality requirements referenced from the DLA Master List, with compliance tied to the version in effect on the solicitation or award date. The item is subject to cybersecurity compliance under CMMC Level 2, meaning the provider must be a certified third-party assessment organization. Covered Defense Information applies, and all packaging must adhere to DLA standards. Although Item Unique Identification is waived per the service customer’s request, federal regulations governing the removal of government identification from non-accepted supplies remain active. The technical data associated with this cable assembly is subject to U.S. export controls under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and prior approval from DLA. The solicitation, issued under SPE4A6-26-T-11FQ on August 2, 2026, requires responses by August 10, 2026, and is procured by the Department of Defense’s ASC Commodities Division, with performance designated at Cherry Point, North Carolina. The primary point of contact is Thanh Hue Nguyen, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11HA
The contract pertains to a special-purpose electrical cable assembly identified by NSN 6150-01-555-9768, with a quantity of 60 units, to be delivered within 158 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance with these specifications is mandatory. The item is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons anywhere in the world, including foreign nationals employed by U.S. entities. Access to such data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DOD training on export-controlled data handling, and prior authorization from DLA. Packaging must adhere to DLA-specific procurement standards, and government identification must be removed from any non-accepted supplies. Although Item Unique Identification is not required per the service customer’s request, DFARS 252.211-7003(c)(1)(i) remains applicable. The contractor must hold CMMC Level 2 certification as a C3PAO and meet all documentation and source approval requirements outlined in the contract. The solicitation, numbered SPE4A6-26-T-11HA, was posted on August 2, 2026, with responses due by August 10, 2026. It is classified under NAICS code 334419, administered by the Department of Defense’s ASC Commodities Division, with performance location in New Cumberland, Pennsylvania, and a ZIP code of 17070-5002. Primary point of contact is Ernest Penrose, reachable via phone and email provided in the contract data. This solicitation is for a federal acquisition and does not specify a small business set-aside. All contractors must comply with cybersecurity, export control, packaging, and documentation mandates before award, and failure to meet these stringent regulatory conditions will result in disqualification.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CE
This contract specifies the procurement of a special-purpose electrical cable assembly under solicitation SPE4A6-26-T-11CE, with a required delivery of seven units within 193 days from award, delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 5995-01-572-6924 and part number N1912-61017 from Keysight Technologies Inc, with a unit price of $7.00 and zero tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, with specific preservation methods including dry preservation and E5 unit containers. No mercury or mercury-containing compounds may be introduced into the product, its packaging, or associated materials except for limited functional uses explicitly authorized by NAVSEA, and portable devices containing mercury must include a secondary containment barrier. Quality assurance requires zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contractor must adhere to DLA’s master list of technical and quality requirements referenced by R and I numbers, and comply with CMMC Level 2 cybersecurity self-assessment requirements. Physical identification of the bare item is mandatory, and all procedures must align with DLA’s packaging and transportation directives, including the prohibition of mercury in preservation and marking materials as per IP056.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EK
This contract pertains to the procurement of a cable assembly specified under solicitation SPE4A6-26-T-11EK, with the NSN 5995-01-546-8557 and part number 20002506-10, requiring 26 units to be delivered FOB origin within 125 days by December 14, 2026. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging requirements per MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere precisely to Drawing 20002506 and SPI P20002506-10 Revision A dated September 30, 2025, and first article testing for packaging is mandatory, requiring three packaged units to be inspected with documentation, photographs, and certification included in the test report. Production lot testing provisions are also referenced if applicable. The contract enforces strict compliance with cybersecurity standards, requiring a CMMC Level 2 Self-Assessment, and prohibits the intentional inclusion of mercury or mercury compounds in the product except for specific functional exemptions outlined by NAVSEA, with additional containment requirements for portable devices containing mercury. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. Inspection and acceptance occur at origin, with no variance permitted in quantity. Configuration change management and source approval documentation are required, and all shipments must be palletized in accordance with DLA packaging directives and delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must provide full documentation for deviations, waivers, and compliance certifications, with all contractual obligations tied to the DLA procurement framework and authorized units of issue.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EE
This contract pertains to a special-purpose electrical cable assembly with stringent technical, quality, and compliance requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and applicable revisions are determined by the solicitation or award date depending on acquisition size. The item is source controlled, meaning it must be manufactured and tested using limited rights data accessible only to qualified vendors who can demonstrate traceability to approved sources; only those with access to this data or the ability to conform to its specifications may submit quotes, and a SAR package is mandatory for any entity seeking source approval. The assembly must comply with DLA packaging standards, removal of government identification from rejected items, and physical marking requirements. Cybersecurity compliance mandates CMMC Level 2 certification via an accredited third-party assessment organization. The item is subject to stringent export controls under ITAR or EAR, restricting technical data disclosure to foreign persons both inside and outside the U.S., and access is limited to contractors with JCP certification, completed DOD export control training, and formal DLA approval. Mercury and mercury-containing compounds are strictly prohibited unless used in exempted functional applications like batteries, fluorescent lights, or specified instruments, and any portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels based on criticality. The NSN 6150-01-258-3719 requires 13 units to be delivered within 54 days of award, with the solicitation issued on August 2, 2026, and responses due by August 10, 2026, under contract number SPE4A6-26-T-11EE, managed by the DLA Commdities Division, with primary point of contact at Ashley Sheppard.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11EQ
This contract pertains to the procurement of LEAD, ELECTRICAL, identified by NSN 6150016191083 and part number A034F322 from CUMMINS POWER GENERATION INC., with a total quantity of 16 units to be delivered under solicitation SPE4A6-26-T-11EQ. The item is subject to strict technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stated, and attributes are assigned verification levels or AQLs based on their classification. Deliveries must be made FOB origin within 157 days of contract award to the designated DLA Distribution Depot at Hill AFB, Utah, with no variance allowed in quantity. All packaging and palletization must comply with DLA’s proprietary packaging requirements, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract specifies a unit price of $16.00, resulting in a total value of $256.00, and requires compliance with DoD unit of issue standards. The point of contact for inquiries is Chinh Le, with the response deadline having passed on August 10, 2026, and the original delivery date set for January 15, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L1-26-T-904Y
The contract pertains to the procurement of a single unit of a wiring harness with NSN 6150-01-578-2113 and part number 3444019, issued under solicitation SPE7L1-26-T-904Y by the Department of Defense’s Land Supply Chain. Delivery is requested within five days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. The shipment must be delivered via traceable freight, excluding parcel post, to the specified military address at Fort Benning, Georgia. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and must comply with all applicable DLA technical and quality standards referenced via the DLA Master List. Government identification must be removed from non-accepted supplies, and the contract includes specific tracking identifiers, project codes, and delivery instructions for government use only.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
NRP, BOARD, PC, SYSTEM
Solicitation # SPE7M5-26-T-364F
The contract pertains to the procurement of NRP, BOARD, PC, SYSTEM with the NSN/Part Number 5999-01-620-0469 for a quantity of two units, issued under solicitation SPE7M5-26-T-364F with a response deadline of August 13, 2026. Delivery is required within 213 days of award, and performance is mandated at Tracy, California, 95304-5000. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The contract explicitly applies Covered Defense Information requirements and mandates compliance with DLA packaging standards. Additionally, it requires the removal of government identification from non-accepted supplies and mandates physical identification or bare item marking in accordance with RQ011 and RQ017. Since no data is currently available, the alternate offeror must submit a complete data package including detailed information for both the approved and alternate parts. The procurement is managed by the Department of Defense’s Active Devices Division, with Andrew Bracken listed as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EB
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-11EB, with a quantity of five units to be delivered within 20 days to Naval Station Newport, Rhode Island, FOB origin. All items must comply with stringent technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must adhere to MIL-STD-2073-1E preservation, MIL-STD-129 marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated as a critical application with source approval requirements and must be traceable throughout delivery, prohibiting parcel post in favor of certified freight methods. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, with limited exceptions for functional components such as batteries or instruments specified by NAVSEA, which must include secondary containment. Packaging must meet palletization guidelines and use only approved materials, with special attention to the prohibition of mercury in any preservation or packing materials. The NSN 5995017220586 is the sole identified material, with a fixed quantity and no variance allowed. Shipments must be directed to the designated military address, labeled appropriately, and delivered by the required delivery date of July 22, 2026. The contract is managed by the Department of Defense’s ASC Commodities Division, with point of contact Ernest Penrose, and the NAICS code 335931 applies to the nature of the product being procured.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11FE
The contract pertains to the procurement of three sleeve bearings identified by NSN 3120-01-198-2352 and part number KDJ08C015-241, with delivery required within 169 days to Robins Air Force Base in Georgia. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and manufacturing may involve casting or forging processes, necessitating potential tooling that the government does not necessarily possess; suppliers must submit a Casting and Forging Assistance Request if needed. The bearings must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking codes applied. Unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Although item unique identification is not required per the service customer’s request, physical identification and bare item marking are still mandatory. The contract is governed by DFARS clauses and DLA packaging directives, with delivery FOB origin and transportation logistics defined by DLA procedural notes. The sole approved source data includes multiple manufacturers with identical part numbers, and the contract originates from the Department of Defense’s ASC Commodities Division under solicitation SPE4A6-26-T-11FE, responding to purchase request 7012343205 with a need ship date of November 16, 2025, and an original required delivery date of March 25, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details