Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NRP, BOARD, PC, SYSTEM

Active
SPE7M5-26-T-364FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of NRP, BOARD, PC, SYSTEM with the NSN/Part Number 5999-01-620-0469 for a quantity of two units, issued under solicitation SPE7M5-26-T-364F with a response deadline of August 13, 2026. Delivery is required within 213 days of award, and performance is mandated at Tracy, California, 95304-5000. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The contract explicitly applies Covered Defense Information requirements and mandates compliance with DLA packaging standards. Additionally, it requires the removal of government identification from non-accepted supplies and mandates physical identification or bare item marking in accordance with RQ011 and RQ017. Since no data is currently available, the alternate offeror must submit a complete data package including detailed information for both the approved and alternate parts. The procurement is managed by the Department of Defense’s Active Devices Division, with Andrew Bracken listed as the primary point of contact.

General Info

Procure two units of NRP, BOARD, PC, SYSTEM NSN 5999-01-620-0469 for delivery to Tracy, CA, by 213 days post-award.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-364F for DLA Land and Maritime Active Devices

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Andrew Bracken
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NRP,BOARD,PC,SYSTEM
NRP,BOARD,PC,SYSTEM
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5999-01-620-0469 Quantity: 2 EA Purchase Request: 7017385431QTY: 2 Delivery: 213 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11CD
The contract pertains to the procurement of 10 units of LEAD, ELECTRICAL with NSN 6150-00-930-2334 under solicitation SPE4A6-26-T-11CD, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, which incorporates referenced standards such as MIL-STD-1916 or ASQ H1331 for sampling and inspection, with zero non-conformances required unless otherwise specified. Attributes are assigned verification levels or AQLs based on criticality, and unspecified attributes are treated as major. Physical identification and marking of the item must comply with RQ017 requirements, and the product contains technical data subject to export controls under ITAR or EAR, restricting disclosure to unauthorized foreign persons regardless of location. Access to this controlled data is limited to contractors with approved JCP certification, completion of mandatory DLA export control training, and formal authorization. The contract includes adherence to DFARS 252.225-7048, and all technical and quality provisions are binding as specified in the DLA master documents referenced.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11CC
This contract is for the procurement of two special-purpose electrical cable assemblies with part numbers 29-245-12 and 36-170-112-1, identified by NSN 6150-01-065-4810, sourced from CELTECH CORP. The items are classified as critical application components and must comply with stringent cybersecurity requirements, including CMMC Level 2 Self-Assessment and handling of covered defense information. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with referenced controls including configuration change management, variance requests, and physical identification per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be verified at designated levels corresponding to critical, major, and minor classifications. Packaging must adhere to MIL-STD-2073-1E and marking per MIL-STD-129 with no special marking code applied. Palletization follows DLA packaging requirements, and units must be delivered FOB origin within 38 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is under solicitation SPE4A6-26-T-11CC with a required delivery date of September 18, 2026, and was posted on August 2, 2026, with a response deadline of August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-Q-0206
This contract pertains to the procurement of a single rotary switch with NSN 5930-01-199-6981, requiring delivery within 90 days of award. The solicitation is issued under SPE7M8-26-Q-0206 with a response deadline of August 15, 2026, and is managed by the Department of Defense’s Electrical Devices Division. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment adopts a later revision. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with limited exceptions for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents approved by NAVSEA. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary per NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, and all government identification must be removed from non-accepted supplies. The point of contact for the solicitation is Kitnarone Phengthongsavath, reachable via email and phone, and the contract is accessible through the DIBBS platform.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11FQ
The contract is for a single cable assembly identified by NSN 5995-01-606-4376, with a required delivery within 20 days after award. It is governed by strict technical and quality requirements referenced from the DLA Master List, with compliance tied to the version in effect on the solicitation or award date. The item is subject to cybersecurity compliance under CMMC Level 2, meaning the provider must be a certified third-party assessment organization. Covered Defense Information applies, and all packaging must adhere to DLA standards. Although Item Unique Identification is waived per the service customer’s request, federal regulations governing the removal of government identification from non-accepted supplies remain active. The technical data associated with this cable assembly is subject to U.S. export controls under either ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export training, and prior approval from DLA. The solicitation, issued under SPE4A6-26-T-11FQ on August 2, 2026, requires responses by August 10, 2026, and is procured by the Department of Defense’s ASC Commodities Division, with performance designated at Cherry Point, North Carolina. The primary point of contact is Thanh Hue Nguyen, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11HA
The contract pertains to a special-purpose electrical cable assembly identified by NSN 6150-01-555-9768, with a quantity of 60 units, to be delivered within 158 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance with these specifications is mandatory. The item is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons anywhere in the world, including foreign nationals employed by U.S. entities. Access to such data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DOD training on export-controlled data handling, and prior authorization from DLA. Packaging must adhere to DLA-specific procurement standards, and government identification must be removed from any non-accepted supplies. Although Item Unique Identification is not required per the service customer’s request, DFARS 252.211-7003(c)(1)(i) remains applicable. The contractor must hold CMMC Level 2 certification as a C3PAO and meet all documentation and source approval requirements outlined in the contract. The solicitation, numbered SPE4A6-26-T-11HA, was posted on August 2, 2026, with responses due by August 10, 2026. It is classified under NAICS code 334419, administered by the Department of Defense’s ASC Commodities Division, with performance location in New Cumberland, Pennsylvania, and a ZIP code of 17070-5002. Primary point of contact is Ernest Penrose, reachable via phone and email provided in the contract data. This solicitation is for a federal acquisition and does not specify a small business set-aside. All contractors must comply with cybersecurity, export control, packaging, and documentation mandates before award, and failure to meet these stringent regulatory conditions will result in disqualification.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CE
This contract specifies the procurement of a special-purpose electrical cable assembly under solicitation SPE4A6-26-T-11CE, with a required delivery of seven units within 193 days from award, delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 5995-01-572-6924 and part number N1912-61017 from Keysight Technologies Inc, with a unit price of $7.00 and zero tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, with specific preservation methods including dry preservation and E5 unit containers. No mercury or mercury-containing compounds may be introduced into the product, its packaging, or associated materials except for limited functional uses explicitly authorized by NAVSEA, and portable devices containing mercury must include a secondary containment barrier. Quality assurance requires zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contractor must adhere to DLA’s master list of technical and quality requirements referenced by R and I numbers, and comply with CMMC Level 2 cybersecurity self-assessment requirements. Physical identification of the bare item is mandatory, and all procedures must align with DLA’s packaging and transportation directives, including the prohibition of mercury in preservation and marking materials as per IP056.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EK
This contract pertains to the procurement of a cable assembly specified under solicitation SPE4A6-26-T-11EK, with the NSN 5995-01-546-8557 and part number 20002506-10, requiring 26 units to be delivered FOB origin within 125 days by December 14, 2026. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging requirements per MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere precisely to Drawing 20002506 and SPI P20002506-10 Revision A dated September 30, 2025, and first article testing for packaging is mandatory, requiring three packaged units to be inspected with documentation, photographs, and certification included in the test report. Production lot testing provisions are also referenced if applicable. The contract enforces strict compliance with cybersecurity standards, requiring a CMMC Level 2 Self-Assessment, and prohibits the intentional inclusion of mercury or mercury compounds in the product except for specific functional exemptions outlined by NAVSEA, with additional containment requirements for portable devices containing mercury. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. Inspection and acceptance occur at origin, with no variance permitted in quantity. Configuration change management and source approval documentation are required, and all shipments must be palletized in accordance with DLA packaging directives and delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must provide full documentation for deviations, waivers, and compliance certifications, with all contractual obligations tied to the DLA procurement framework and authorized units of issue.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11CW
The contract pertains to the procurement of six units of lead electrical material identified by NSN 6150-99-852-0619 and part number G406/8745, supplied by KNDS DEFENCE UK LIMITED. Delivery is required within five days of award, with shipment originating at the supplier’s location under FOB origin terms and a strict zero variance allowance on quantity. Inspection and acceptance occur at the destination, specifically at the DLA LMP Zone 1 facility in Texarkana, Texas. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required; palletization follows DLA packaging standards. The item is designated as a critical application with no shelf life, and sampling for quality assurance must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan where non-conformances are not permitted unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revision control tied to the solicitation or award date depending on acquisition size. Shipping must be conducted via the fastest traceable means, explicitly excluding parcel post, and all documentation references the assigned contract SPE4A6-26-T-11CW with a required delivery date of July 15, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EE
This contract pertains to a special-purpose electrical cable assembly with stringent technical, quality, and compliance requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and applicable revisions are determined by the solicitation or award date depending on acquisition size. The item is source controlled, meaning it must be manufactured and tested using limited rights data accessible only to qualified vendors who can demonstrate traceability to approved sources; only those with access to this data or the ability to conform to its specifications may submit quotes, and a SAR package is mandatory for any entity seeking source approval. The assembly must comply with DLA packaging standards, removal of government identification from rejected items, and physical marking requirements. Cybersecurity compliance mandates CMMC Level 2 certification via an accredited third-party assessment organization. The item is subject to stringent export controls under ITAR or EAR, restricting technical data disclosure to foreign persons both inside and outside the U.S., and access is limited to contractors with JCP certification, completed DOD export control training, and formal DLA approval. Mercury and mercury-containing compounds are strictly prohibited unless used in exempted functional applications like batteries, fluorescent lights, or specified instruments, and any portable devices containing mercury must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels based on criticality. The NSN 6150-01-258-3719 requires 13 units to be delivered within 54 days of award, with the solicitation issued on August 2, 2026, and responses due by August 10, 2026, under contract number SPE4A6-26-T-11EE, managed by the DLA Commdities Division, with primary point of contact at Ashley Sheppard.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-11EQ
This contract pertains to the procurement of LEAD, ELECTRICAL, identified by NSN 6150016191083 and part number A034F322 from CUMMINS POWER GENERATION INC., with a total quantity of 16 units to be delivered under solicitation SPE4A6-26-T-11EQ. The item is subject to strict technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stated, and attributes are assigned verification levels or AQLs based on their classification. Deliveries must be made FOB origin within 157 days of contract award to the designated DLA Distribution Depot at Hill AFB, Utah, with no variance allowed in quantity. All packaging and palletization must comply with DLA’s proprietary packaging requirements, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract specifies a unit price of $16.00, resulting in a total value of $256.00, and requires compliance with DoD unit of issue standards. The point of contact for inquiries is Chinh Le, with the response deadline having passed on August 10, 2026, and the original delivery date set for January 15, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L1-26-T-904Y
The contract pertains to the procurement of a single unit of a wiring harness with NSN 6150-01-578-2113 and part number 3444019, issued under solicitation SPE7L1-26-T-904Y by the Department of Defense’s Land Supply Chain. Delivery is requested within five days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence. Packaging must be marked and labeled per MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. The shipment must be delivered via traceable freight, excluding parcel post, to the specified military address at Fort Benning, Georgia. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and must comply with all applicable DLA technical and quality standards referenced via the DLA Master List. Government identification must be removed from non-accepted supplies, and the contract includes specific tracking identifiers, project codes, and delivery instructions for government use only.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M5-26-T-364V
The contract pertains to the assembly of circuit cards under solicitation SPE7M5-26-T-364V, with a total quantity of 14 units required and a delivery deadline of 177 days after award. This is a total small business set-aside under NAICS code 334418, restricted to qualified small businesses, and managed by the Department of Defense’s Active Devices Division. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on procurement size. The item includes technical data subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Additionally, cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization, and the contractor must comply with DLA packaging standards and procedures for removing government identification from non-accepted supplies. Performance is to occur at Hill AFB, Utah, and inquiries may be directed to Mark Bayless, the primary point of contact.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-363U
The contract specifies the procurement of four electric fuses, cartridge type, identified by NSN 5920-01-488-8327 and part numbers 12379 from FIBREBOND CORP and FLNR100ID from LITTELFUSE INC. The delivery requirement is for completion within 20 days from the specified required delivery date of July 29, 2026, with shipment to be delivered FOB origin and inspected and accepted at the destination. No variance in quantity is permitted, and the total contract value is $16.00 based on a unit price of $4.00 per unit. Packaging must conform strictly to DLA’s Master List of Technical and Quality Requirements, with additional compliance to MIL-STD-129 for marking and labeling. If deemed hazardous under FED-STD-313, packaging must meet TQ requirement IP025; otherwise, it must follow ASTM D3951 and commercial packaging standards, with palletization adhering to RP001. The shipment must be sent via the fastest traceable freight means, explicitly excluding parcel post, to the designated DoD logistics site in Houston, Texas. All technical, quality, and packaging specifications issued by DLA take precedence over any commercial standards. The solicitation was issued under contract number SPE7M5-26-T-363U with a response deadline of August 13, 2026, and is managed by the Department of Defense’s Active Devices Division, with Matthew Stanko as the primary point of contact.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ATTENUATOR, VARIABLE
Solicitation # SPE7M5-26-T-364D
The contract involves the procurement of a variable attenuator identified by NSN 5985-01-277-3293 and part number 434459-1, with a quantity of two units to be delivered within 206 days under solicitation SPE7M5-26-T-364D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate containers, and packaging code U, while marking follows MIL-STD-129 with no special marking required. The item is intended for shipment to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers, and sampling adheres to MIL-STD-1916 or comparable zero-based plans, with zero nonconformances required unless otherwise stated. Cybersecurity compliance is mandated through a CMMC Level 2 self-assessment, and the contract incorporates requirements for handling covered defense information and removal of government identification from rejected supplies. The contract was posted on August 2, 2026, with responses due by August 13, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-364Q
The contract pertains to the procurement of an electrical plug connector with the NSN 5935-01-540-0279 and part number K5M5-AKPN from The Boeing Company or 59122WK20PN from TE Connectivity Corporation, with a total quantity of 48 units at a unit price of $48.00, resulting in a total contract value of $2,304. Delivery is required within 81 days from the award date, with FOB origin terms, and inspection and acceptance are to occur at the destination. The product must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R or I numbers, including packaging standards such as MIL-STD-129 for marking and labeling, and adherence to RP001 for DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must conform to ASTM D3951 for non-hazardous items or FED-STD-313 compliant methods if hazardous, with DLA requirements taking precedence. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is November 3, 2026, with the original delivery due by February 11, 2027. The solicitation number is SPE7M5-26-T-364Q, issued under NAICS code 335931 by the Department of Defense’s Active Devices Division, and all documentation must align with the authorized unit of issue as defined by DLA.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M5-26-T-364T
This contract pertains to the procurement of an electrical plug connector, identified by NSN 5935001772221 and part number M24231/1-001, governed by military specification MIL-DTL-24231/1E and referenced engineering instructions and quality assurance provisions. The item is classified as a critical application requiring strict adherence to technical and quality standards, including compliance with DLA packaging requirements, MIL-STD-2073-1E packaging, and MIL-STD-129 marking. The contract prohibits the use of ozone-depleting chemicals and restricts intentional incorporation of mercury or mercury-containing compounds, with limited exceptions for specific functional components such as batteries and sensors, which must include secondary containment measures. Sampling and inspection protocols follow MIL-STD-1916 or ASQ SPE7M5-26-T-364T with zero-defect acceptance criteria unless otherwise specified, and critical dimensions such as keyway diameter must be measured to the outer edge of the radius per Engineering Instruction EI-001772221. The item is subject to configuration change management and requires formal variance requests for any deviations. The contract includes two line items: one for the main product, with a quantity of 851 units delivered FOB origin within 215 days and a unit price of $851.00, and a second line item for first article testing (FAT) requiring one unit to be submitted for validation. The FAT is mandatory and no separate charge is assumed unless explicitly quoted; if waived, no payment is made for this line. The delivery destination is the DLA Distribution facility in New Cumberland, PA, and the shipment must be palletized and documented in strict compliance with DLA procedures. The solicitation mandates full and open competition, applies covered defense information requirements, and enforces strict compliance with all referenced technical documents listed in the DLA Master List. The original required delivery date is December 26, 2026, with a need ship date of November 17, 2026, and the contract is issued under solicitation SPE7M5-26-T-364T, with responses due by August 13, 2026.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-364X
This contract specifies the procurement of a linear microcircuit under Federal Supply Class 5962, with the part number REG1117A manufactured by Texas Instruments Incorporated and identified by NSN 5962016069670. The requirement mandates strict adherence to traceability, packaging, and marking standards set forth by the Defense Logistics Agency, including compliance with DLA Procurement Notes C03 for supply chain documentation retention and DLA Land and Maritime Form 918 for test and traceability verification. The contractor must submit digital copies of traceability or test reports at least 15 days prior to delivery, limited to 15 megabytes per email, using a prescribed naming convention, and must receive explicit written authorization before shipping. Physical packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special markings prohibiting disclosure of item nomenclature due to controlled status. Lead finish must be marked per IPC/JEDEC J-STD-609, and ESD and EMI protection must be implemented using qualified materials listed on QPL-81705, with cushioning meeting A-A-59136 Class 1 Grade B specifications and thickness requirements exceeding lead length by at least one-eighth inch. No surplus material is acceptable, and inspection and acceptance occur at destination with zero tolerance for non-conformances under MIL-STD-1916 or comparable zero-based sampling plans. The contract specifies a firm fixed price of $24.00 per unit, totaling $576 for 24 units, with delivery due within 127 days, shipped FOB origin to the designated Columbus, Ohio logistics center.
Semiconductor and Related Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-364L
The contract pertains to the procurement of four electrical plug connectors with NSN 5935-01-467-1395 under solicitation SPE7M5-26-T-364L, issued by the Department of Defense’s Active Devices Division. Delivery is mandated within 172 days after award, and responses must be submitted by August 13, 2026. All supplies must comply with DLA packaging requirements and incorporate technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to strict cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the use of any Class I ozone-depleting substances in its design or manufacturing is explicitly prohibited unless written approval from the contracting officer is obtained. Physical identification and marking of the bare item are required, and government identification must be removed from non-accepted supplies. No data package is provided, so offerors must submit complete documentation for both the approved and alternate part numbers. The place of performance is specified as New Cumberland, Pennsylvania, with Margaret Smith as the primary point of contact for inquiries.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
AMPLIFIER, AUDIO FRE
Solicitation # SPE7M5-26-T-364P
The contract pertains to the procurement of three audio frequency amplifiers, identified by NSN 5996-01-254-9503, under solicitation SPE7M5-26-T-364P, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days of award, with the response deadline set for August 13, 2026, and the solicitation posted on August 2, 2026. The NAICS code 334220 classifies this as an electronics manufacturing procurement, and the place of performance is designated as Patrick SFB with a ZIP code of 32925. The contract incorporates DLA packaging requirements and mandates adherence to all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision controlled by the solicitation issue date for this simplified acquisition. Covered defense information provisions apply, and any non-accepted supplies must have government identification removed. The offeror must submit a complete data package covering both the approved part and any alternate part proposed. Primary point of contact for inquiries is Jonathan Flowers, reachable via email and phone provided.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
INSERT, ELECTRICAL CONN
Solicitation # SPE7M5-26-T-364E
This contract is for the procurement of 60 electrical connector inserts with NSN 5935-01-062-4473 under solicitation SPE7M5-26-T-364E, issued as a Total Small Business Set-Aside with a response deadline of August 13, 2026, and a required delivery within 100 days of award. The item must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or contract award date depending on acquisition size. The contractor is required to implement configuration change management procedures and must not use any Class I ozone-depleting chemicals in production or packaging; any substitute chemicals require prior approval unless explicitly permitted by specification. All supplies must be physically marked as per RQ017, and government identification must be removed from non-accepted items per RQ011. Inspection and acceptance must occur at the origin per RQ009. First Article Testing is mandatory per MIL-C-24321E, with the contractor required to notify DLA at least 10 days in advance and submit one unit for testing within 10 calendar days after government receipt. The government may waive this requirement for previously accepted products meeting preproduction testing criteria. The place of performance is New Cumberland, PA, with the Department of Defense’s Active Devices Division as the contracting entity. Full and open competition applies for eligible small businesses, and detailed technical drawings and a bid set are available. Contractor FAT obligations are active and governed by FAR 52.209-3.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M5-26-T-364W
This contract is for the procurement of ten units of a radio frequency interference filter identified by NSN 5915009971137, manufactured strictly to the original equipment manufacturer's drawing specifications and available only from prequalified sources. Any offers proposing alternative manufacturers must include comprehensive technical and quality data to demonstrate equivalency for the intended application, as mandated by DLAI 3200.1. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the applicable revision of that list is determined by the solicitation or award date depending on the acquisition type. The contract prohibits the use of Class I ozone depleting chemicals in any part of the product or manufacturing process, overriding any conflicting specification language without altering the required product performance. Additionally, the item is subject to restricted access protocols under RD003, and vendors must be certified by a Cybersecurity Maturity Model Certification Level 2 accredited third-party assessment organization. Delivery is required within 20 days of award, and all supplies must be packaged in accordance with DLA packaging standards. The solicitation opens on August 2, 2026, with responses due by August 13, 2026, and is issued under solicitation number SPE7M5-26-T-364W by the Department of Defense’s Active Devices Division with Matthew Stanko as the primary point of contact.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
INSERT, FEED
Solicitation # SPE7M5-26-T-364R
This contract, issued under solicitation number SPE7M5-26-T-364R by the Department of Defense’s Active Devices Division, requires the delivery of one unit of a specific item identified by NSN 5999-01-588-5553 and part number 4241071-1. Delivery is due within 10 days of contract award, FOB origin, with no variance allowed in quantity. The item must be packaged in strict adherence to DLA’s Packaging Requirements for Procurement, including compliance with MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All technical and quality requirements referenced by R or I numbers in the contract are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any industry standards. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. The item must be shipped via the fastest traceable means, excluding parcel post, to the specified delivery address in Eastover, South Carolina, with all packaging clearly marked for W81BDW. The unit of issue is each, and the contract specifies no pricing details beyond a nominal quantity with a total price of $1.00, indicating this may be a nominal or administrative fulfillment. The original required delivery date is July 28, 2026, and all government-specific identifiers and data codes are included for internal tracking purposes only.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-363S
The contract is for the procurement of one antenna with NSN 5985-01-659-6352 and part number 66540-10 from Trimble Inc, under solicitation SPE7M5-26-T-363S. Delivery is required within 20 days from the contract award date, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings. The unit is to be shipped via traceable freight, not parcel post, to the distribution management office at Camp Lejeune, North Carolina. Technical and quality standards referenced in the DLA Master List govern the requirements, with the applicable revision controlled by the solicitation issue date. The government’s required delivery date is July 29, 2026, and the contract includes specific logistics identifiers such as the military freight number and project code TP 3. The procurement is classified under NAICS code 334220 and is managed by the Department of Defense’s Active Devices Division, with Matthew Stanko listed as the primary point of contact for inquiries.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details