This Solicitation opportunity from Department Of Defense was posted on September 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ADAPTER, STRAIGHT, PIPE

Closed

SPE7M3-26-T-9194Federal

Submission Closed09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919

New

DIBBS

Blanking Plate Assembly SupplierThis subcontract involves the manufacture or sourcing of four Blanking Plate Assemblies, identified by NSN 4820015602710, to support prime contractors delivering for the DLA Weapons Support ASC. The supplier must adhere to RA001 requirements and ensure full compliance with the Buy American Act. Quality assurance is mandatory, utilizing calibrated test equipment and following either MIL-STD-1916 or ASQ H1331 zero-based sampling standards. All deliverables must be packaged according to ASTM D3951 and MIL-STD-129 specifications. The contract requires the delivery of the completed assemblies within 20 days of the award. Performance will take place at Dover AFB, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supplier of Fixed Metallized Paper-Plastic CapacitorsThis subcontract involves the supply of fixed, metallized, paper-plastic capacitors, specifically NSN 5910-01-386-3997, to prime contractors supporting DLA supply contracts. The Department of Defense, through the DLA Weapons Support Maritime Supply Chain ESOC Buys, requires that all components feature lead finish markings according to IPC/JEDEC J-STD-609 and undergo quality sampling per MIL-STD-1916 or ASQ H1331. Additionally, all items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The contract mandates strict compliance with the Buy American Act and requires delivery of the completed capacitors FOB Origin to Fort Bliss, Texas. Interested parties should note the response deadline of November 16, 2026, for this requirement categorized under NAICS code 332919.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1397

Solicitation SPE7MC-27-T-1397 is a request for quotations issued by the Defense Logistics Agency for the procurement of one valve positioner, identified by NSN 4820-01-572-1305 and part number NE729S/S1 from Metso Automation USA, Inc. The requirement is for a single unit to be delivered to the USS Tripoli LHA 7 at FPO AP 96694-2900. The delivery timeline is specified as 20 days after order, with an original required delivery date of October 29, 2026. Inspection and acceptance will occur at the destination, and the contract is governed by FAR 52.246-2. The procurement includes strict technical and quality mandates, including compliance with the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA packaging requirements. A critical material restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds. Administratively, the contract utilizes the Wide Area WorkFlow system for electronic invoicing and incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity incident reporting, and the prohibition of covered defense telecommunications equipment. Quotations must be submitted via the DIBBS portal by November 16, 2026.

Defense Logistics Agency

POSTED

DEADLINE

COUPLING HALF, QUICK DI

Solicitation # SPE7M3-27-T-0837

Solicitation SPE7M3-27-T-0837 is a small business set-aside request for quotations issued by the DLA Weapons Support Fluid Handling Division for one unit of a Quick Disconnect Coupling Half, identified by NSN 4730-01-538-4258. The item is designated as a critical application item and must be manufactured according to Basic Drawing NR 89256 803-8214608 Revision D. The original required delivery date is October 15, 2026, with a delivery window of 20 days after receipt of order. Shipping is FOB Origin, and the final destination for inspection and acceptance is the USS SHOUP DDG 86. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and incorporates technical requirements via the DLA Master List (RA001). A key material restriction prohibits the intentional addition of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the Berry Amendment. Quotes must be submitted through the DIBBS portal.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0832

Solicitation SPE7M3-27-T-0832 is a procurement request from the DLA Weapons Support Fluid Handling Division for two units of an Elbow, Pipe to Boss, identified by NSN 4730-99-496-1766. The required parts correspond to JCB Inc. or JCB Service part number 347/22301. The delivery timeline is specified as 20 days after order, with an original required delivery date of October 29, 2026. Shipping is FOB Origin, and the destination for inspection and acceptance is Fort Benning, Georgia. Parts produced using additive manufacturing processes are explicitly ineligible for award. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with general packaging following ASTM D3951. Technical and quality requirements are governed by the DLA Master List (RA001), which takes precedence over ASTM standards. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. All quotes and inquiries are managed through the DIBBS portal and the designated buyer, William Cain.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

BLANKING PLATE ASSEMBL

Solicitation # SPE4A5-27-T-2198

Solicitation SPE4A5-27-T-2198 is a request for quotations from the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of four Blanking Plate Assemblies, identified by NSN 4820015602710 and Lockheed Martin part number 4V59127-109A. The required delivery date is October 27, 2026, with a delivery lead time of 20 days after order. Shipping is FOB Origin, with both inspection and acceptance occurring at the destination, specifically Dover AFB, Delaware. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including standards for covered defense information, measuring and test equipment, and bare item marking. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and various DFARS cybersecurity and telecommunications prohibitions. The acquisition falls under NAICS code 332919 and incorporates a HUBZone price evaluation preference.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M0-27-T-1018

Solicitation SPE7M0-27-T-1018 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one nonmetallic hose assembly, identified by NSN 4720-01-505-6615. A critical technical requirement is that the hose must be blue. The item is to be delivered to JRMC Det Sasebo, Japan, with a required delivery date of November 3, 2026. The procurement is conducted under FOB Origin terms and is part of the First Destination Transportation program. The contract mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and export control of technical data under ITAR or EAR regulations. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with specific requirements for shelf-life and hazardous material labeling. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with NIST SP 800-171 for cybersecurity. Offerors must also comply with the Buy American Act and the Berry Amendment regarding domestic material restrictions.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Fabrication of SSDG Exhaust Bellows Expansion JointThis subcontract involves the fabrication and supply of one 26-inch NPS stainless steel expansion joint, part number 000994430, for prime contractors supporting Mid Atlantic Regional Maintenance Center ship projects. The unit must be constructed from A167 Type 321 Stainless Steel and feature a 125 pound F.F. inlet and a buttweld outlet. The project is designated as a total Small Business Set Aside under NAICS code 332919. To access the necessary technical drawings for production, the contractor must hold Joint Certification Program certification. The procurement is managed through the Department of Defense for the Mid Atlantic Regional Maintenance Center.

Mid Atlantic Reg Maintenance Ctr

POSTED

DEADLINE

Solicitation # N0010426QED73

This firm-fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mech, is a total small business set-aside for the procurement of Disc and Ring components under NSN 4820-01-612-7519. The requirement consists of multiple line items for delivery to specific destinations, including W25G1U and W62G2T, with a delivery period of 180 days. The contract is awarded based on the Lowest Priced Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied to eligible HUBZone small business concerns. The contractor is required to adhere to strict quality and technical standards, including the use of Individual Repair Part Ordering Data (IRPOD) and Technical Data Package version 005. Key compliance requirements include MIL-STD-2073 for packaging, MIL-STD-129 for marking, and the prohibition of mercury in hardware. Inspection and acceptance will occur at the contractor's or subcontractor's plant. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement also incorporates critical regulatory clauses, including DO priority ratings for national defense and cybersecurity maturity model certification requirements.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

48--VALVE,RELIEF,PRESSU

Solicitation # N0010427QNA48

Solicitation N00104-27-Q-NA48 is a fixed-price procurement issued by Navsup Weapon Systems Support Mechanicsburg for eight 3/4 inch feed water relief valves. These components are designated as Special Emphasis material because they are used in crucial shipboard systems where failure could result in serious personnel injury or loss of the vessel. The valves must be manufactured in accordance with Anderson Greenwood drawing 20325 and CD Sheet 16109, featuring a spring set pressure range of 551 to 750 PSI and bodies made from ASTM-A216 grade WCB. Key technical requirements include rigorous proof pressure testing at 2175 PSIG, seat tightness testing at 600 PSIG, and strict adherence to mercury-free standards. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Offerors who are not the Original End Manufacturer must provide a signed letter of authorization and the OEM's CAGE code. Quality assurance is performed at the source by a Government Quality Assurance Representative, and the contractor must maintain an ISO-9001 compliant quality system. Deliverables include detailed test certifications and certificates of compliance submitted via Wide Area Workflow. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with final delivery designated as FOB Destination to the Portsmouth Naval Shipyard in Kittery, Maine.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

USS ARLINGTON (LPD-24) Expansion Joint Parts

Solicitation # N5005427Q0020

The Mid-Atlantic Regional Maintenance Center is soliciting quotes under RFQ N5005427Q0020 for the procurement of new Ships Service Diesel Generator Exhaust Bellows parts for the USS ARLINGTON (LPD-24). This is a 100 percent Small Business Set-Aside for commercial items utilizing Simplified Acquisition Procedures. The required deliverables include one 26 inch NPS expansion joint made of A167 Type 321 Stainless Steel, 24 hex heavy stainless steel bolts, Grapholi gaskets, and stainless steel lock washers. All parts must be new, as refurbished or used components are strictly prohibited. Delivery is required by January 7, 2028, or the best possible date, with shipping terms set as FOB Destination to DLA Distribution Norfolk in Virginia. Award will be based on a Best Value determination evaluating technical capability, delivery capacity, and price. To be eligible for award, offerors must achieve an acceptable rating for all technical factors. Qualified sources must provide a detailed unpriced technical quote, a capabilities statement, and a fully burdened price breakdown. Because the procurement involves DOD unclassified export controlled technical data, Joint Certification Program certification is required to access technical drawings. Responses are due by 6:00 pm EST on November 10, 2026, and must be submitted via email to the primary point of contact, Donald Bowers.

Mid Atlantic Reg Maintenance Ctr

POSTED

DEADLINE

Solicitation # N0010426QEB89

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is a Request for Quotation for the procurement of three units of Globe Valves with Actuators (NSN 7HH 4820-01-631-0923). The requirement is for special purpose material with a delivery timeframe of 180 days, shipped FOB Destination. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering technical compliance, price, and supplier performance risk via the Supplier Performance Risk System. The contractor must adhere to strict quality and technical standards, including the use of Individual Repair Part Ordering Data (IRPOD) and higher-level contract quality requirements. Key deliverables include a certification package per DI-MISC-A81356 and a procedure package within 45 days of award. Packaging must comply with MIL-STD-2073 and MIL-PRF-23199, with specific requirements for cleanliness controls and item unique identification. All quotes must be submitted by the close of business on September 25, 2026, and pricing must remain valid for 60 days following the closing date.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 22 days

AI Contract Overview

Solicitation SPE7M3-26-T-9194, issued by the DLA Land and Maritime Fluid Handling Division, is for the procurement of 28 straight pipe-to-hose adapters, identified by NSN 4730-01-622-5812. The requirement specifies a delivery timeframe of 106 days after the order, with a required delivery date of January 13, 2027. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, which takes precedence over the general packaging standard ASTM D3951. All packaging must be marked and labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific authorized cases. Additionally, the use of additive manufacturing is prohibited unless specifically authorized. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, human trafficking, and domestic material sourcing.

General Info

DLA procurement of 28 pipe-to-hose adapters delivered to New Cumberland by January 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

18 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 16

Solicitation

Response DeadlineSep 28

Deadline has passed

Submission Closed

09/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

William Cain

contact@example.gov

+1 (555) 000-0000

Full Description

ADAPTER,STRAIGHT,PIPE TO HOSE
ADAPTER, STRAIGHT, PI
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MCMASTER-CARR SUPPLY CO 39428 P/N 5361K43
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M3-26-T-9194
SECTION B
PR: 7018378004 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018378004 0001 EA 28.000
NSN/MATERIAL:4730016225812
DELIVERY (IN DAYS):0106
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/13/2027 Original Required Delivery Date:01/13/2027
SPE7M3-26-T-9194 NSN/Part Number: 4730-01-622-5812 Quantity: 28 EA Purchase Request: 7018378004QTY: 28 Delivery: 106 days ADO