Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Adapter, Terminal, PVC Thermoplastic

Active

Z4956State & Local

Response Deadline08/14/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for an Adapter, Terminal, PVC Thermoplastic designed for a 2-inch diameter conduit with an actual outside diameter of 2.375 inches. Approved manufacturers include SEDCO, CAN-TEX, CARLONE, and ALLIED, with specific part numbers such as PICOMAME943J and ALLIED59620 required for compliance. The solicitation number is Z4956, issued by Nashville Electric Service under the state of Tennessee, targeting state, local, and educational (SLED) government procurement. The solicitation was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM Eastern Time. The place of performance is Nashville, Tennessee, and the primary point of contact for procurement inquiries is Tiffany Caruthers, reachable via email at tcaruthers@nespower.com or by phone at 615-747-3593. Further details and submission instructions can be accessed through the vendor portal at the provided uiLink.

General Info

Adapter for 2-inch conduit, approved manufacturers, SLED procurement, Nashville, Tennessee, bid deadline August 14, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

423610 - Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant WholesalersView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

Z4956_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 10

Solicitation

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 07:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, USA

Contacts

Tiffany CaruthersProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

CONDUIT PLAS ADAP TERM 2 ADAPTER, TERMINAL, PVC THERMOPLASTIC, FOR 2" DIAMETER (2.375). Approved Manufacturers and/or Part Numbers: SEDCO. PICOMAME943J CRTNTEED. CAN-TEX. CARLONEE943J ALLIED59620

Similar Contracts

Same NAICS industry code

WIRE, ELECTRICAL

Solicitation # SPE7M0-26-Q-1165

The contract specifies the procurement of a single foot of electrical wire with part number 6145-01-533-2532, requiring one continuous 500-foot spool per unit, and mandates strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. Compliance with the applicable revision of the Master List depends on the acquisition type: for simplified acquisitions, the version in effect on the solicitation issue date or award date controls, while for large acquisitions, the version in effect on the RFP issue date applies unless a solicitation amendment incorporates a later revision, in which case the amendment date governs. The contract enforces the removal of government identification from non-accepted supplies and requires alternate offerors to submit a complete data package covering both the approved and alternate parts. The solicitation number is SPE7M0-26-Q-1165, issued on August 10, 2026, with responses due by August 17, 2026, and delivery must be completed within five days after order. The purchasing agency is the Department of Defense through the Maritime Supply Chain ESOC Buys, with Abaigael Masterson listed as the primary point of contact via email and phone. The order is a federal solicitation with no set-aside designation and no specified NAICS code.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

BRUSH, ELEC CONTACT

Solicitation # SPEFA1-26-Q-0103

The contract specifies the procurement of eight units of a brush for electrical contact, identified by part number 5977-LN-003-5689, under solicitation number SPEFA1-26-Q-0103 issued by the Defense Logistics Agency Fleet Readiness Southwest. The item is priced at a firm fixed price with no variance allowed in quantity, meaning exactly eight units must be delivered without adjustment. Delivery is required within four days after award, with both inspection and acceptance taking place at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must adhere to DLA’s RP001 packaging requirements, with the unit of issue and quantity per unit pack as stated in the contract. The government’s material need date is October 31, 2026, and the delivery destination is specified as the Naval Base Coronado receiving officer address, while the parcel post address is listed as the Fleet Readiness Center Southwest PO Box in San Diego. All packaging and labeling must align with DLA’s master list of technical and quality requirements, which override any conflicting standards. The contract is solicited through the DIBBS platform with a response deadline of August 13, 2026, and primary point of contact is Kenyawn Hunter from DLA Fleet Readiness Southwest.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 14 hours ago

DEADLINE

Solar Panel & Inverter Supply

San Luis Obispo County Air Pollution Control District

POSTED

about 17 hours ago

DEADLINE

Cabling Materials for Lighthorse Police

Solicitation # 27563

The Chickasaw Nation is soliciting quotes for cabling materials to support the Lighthorse Police, with the solicitation numbered 27563 and posted on August 10, 2026. Responses are due by August 12, 2026, leaving a narrow window for vendors to submit proposals. The procurement is classified as a tribal solicitation under the Chickasaw Nation’s procurement framework, with no specific set-aside or NAICS code indicated. All materials are intended for use at an unspecified location within the Chickasaw Nation’s jurisdiction, and no detailed address information is provided for either the agency or the place of performance. Point of contact for inquiries is Chloe Miller, reachable via email at chloe.miller3@chickasaw.net. Vendors must access the full solicitation document through the Chickasaw Business Network’s online bid board portal to review requirements and submit responses.

Chickasaw Nation

POSTED

about 18 hours ago

DEADLINE

Vermont Regional Airport (RUT) CCTV System Upgrade

Solicitation # 70T05026Q5903N006

The U.S. Department of Homeland Security, through Mission Essentials, is soliciting quotes for a CCTV system upgrade at Vermont Regional Airport (RUT) under solicitation number 70T05026Q5903N006, issued as a combined synopsis and request for quotation under FAR Part 12. This acquisition is exclusively set aside for small business concerns, with no separate written solicitation to be issued. All requirements, including technical specifications, line-item quantities, pricing tables, delivery terms, and applicable provisions and clauses, are detailed in the attached RFQ and its two attachments, which must be reviewed thoroughly by potential offerors. A mandatory site visit is scheduled for August 21, 2026, and failure to attend will disqualify a vendor from consideration for award. Quotes must be submitted via email to kurt.allen@tsa.dhs.gov no later than September 10, 2026, at 10:00 AM Eastern Time. The place of performance is in Vermont, with the contracting office located in Springfield, Virginia. The NAICS code for this procurement is 423610, and all terms governing the contract are incorporated by reference from the RFQ documentation.

Mission Essentials

POSTED

about 19 hours ago

DEADLINE

in about 1 month

136226 - 136226 Kit, Splice, Termination, Transition, and Elbow Adapter

Solicitation # 231373

The City of Los Angeles is soliciting bids for a comprehensive procurement of kits, splices, terminations, transitions, and elbow adapters under solicitation number 231373, with a response deadline of August 26, 2026. This tender is intended to supply specialized components used in infrastructure and utility systems, likely for electrical, telecommunications, or similar municipal applications. The place of performance is listed as Los Angeles, California, with the contract managed by the City of Los Angeles through its Department of Water and Power, and all deliveries and compliance must meet the specifications outlined in the official bid documents. Interested vendors must register on the City of Los Angeles’s official procurement portal to participate, as third-party platforms like Biddingo.com are provided only for informational purposes and do not facilitate actual bidding. All inquiries regarding bid content, requirements, or discrepancies must be directed to the official point of contact, Jaimesha Ferrell at jaimesha.ferrell@ladwp.com. The solicitation does not specify a set-aside type or NAICS code, and vendors are advised to review the official posting directly through the provided link to ensure full compliance with submission guidelines, technical specifications, and contractual obligations. Failure to adhere to the registration and submission procedures may result in disqualification.

City of Los Angeles

POSTED

DEADLINE

146564 - 146564 CONNECTOR, CONDUIT

Solicitation # 231366

The City of Los Angeles is soliciting bids for Connector, Conduit under Tender #231366, with a response deadline of August 17, 2026, at 5:00 PM. This procurement is managed by the Department of Water and Power, with Armando Aparicio listed as the primary contact for inquiries. The contract pertains to the supply of specific conduit connectors, with performance expected to occur in Los Angeles, CA, under the zip code 90012. Vendors interested in participating must register on the City of Los Angeles procurement portal, as direct participation requires compliance with the agency’s registration and bidding protocols. All questions regarding the bid’s language, terms, or discrepancies must be directed to the originating agency, as the provided information is for informational purposes only and may not reflect final or complete requirements. The bid opportunity is posted on the Biddingo platform but links to an external site where the full solicitation details are available. Biddingo disclaims responsibility for the content or accuracy of third-party pages linked from its site. The solicitation does not specify a set-aside type or NAICS code, and the point of contact listed on the public record is unrelated to the City’s internal team. Interested parties are advised to access the official bid page via the provided link, verify all specifications, understand registration obligations, and meet all submission deadlines to be considered eligible. No additional details on quantities, technical specifications, or evaluation criteria are included in the summary and must be obtained directly from the City of Los Angeles.

City of Los Angeles

POSTED

DEADLINE

Supply of Electrical Materials & ComponentsThe contract is for the supply of UL-listed and code-compliant electrical materials and components required for repair and maintenance projects within Tewksbury Public Schools facilities. This includes essential items such as fixtures, wiring, breakers, panels, and other related electrical components that must meet national safety and regulatory standards. The work is intended to support ongoing infrastructure upkeep in school buildings located at Pleasant Street, Tewksbury, MA, with an emphasis on safety, reliability, and compliance with applicable electrical codes. This subcontract opportunity was posted on August 10, 2026, with a response deadline of August 26, 2026, and falls under NAICS code 423610, which classifies electrical apparatus and equipment wholesaling. The solicitation is managed by the Massachusetts agency overseeing Tewksbury Public Schools, and while no specific set-aside provisions or point of contact are identified, the place of performance is clearly defined to ensure timely delivery to the designated school locations. All supplied materials must be verified as UL-listed and fully compliant with current electrical standards to ensure the safety and functionality of the schools' electrical systems.

SCHOOLS - Tewksbury Public Schools

POSTED

DEADLINE

Supply of Fire Alarm System Components

OPS-Procurement & Distribution/9680

POSTED

DEADLINE

in about 1 month

Defense-Grade Electrical and Wiring Supplies SupplyThe contract entails the supply of commercial and military-grade electrical apparatus, wiring supplies, grounding strips, and related equipment specifically designated for use by the U.S. military under a subcontract arrangement administered by the Defense Logistics Agency within the Department of Defense. The equipment must meet rigorous defense standards to ensure reliability, safety, and performance in operational environments, with all deliverables intended to support critical military infrastructure and systems. The North American Industry Classification System code 423610 confirms the scope of distribution and wholesale of electrical apparatus and supplies. The contract was posted on August 9, 2026, under the master award SPE7LX21D0087 with delivery order SPE7LX26FB5G7, and is currently active with 207,662 associated transactions. Performance is expected to occur domestically or internationally as required by operational need, though specific locations are not detailed. The subcontract may involve multiple vendors fulfilling orders under the broader defense supply chain, and compliance with federal procurement regulations and military technical specifications is mandatory. All supplied items must be fully traceable, certified, and aligned with current defense readiness requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Pad-Mounted Transformers and Electrical EquipmentThe contract entails the supply of six 25kV pad-mounted transformers labeled ST-1 through ST-6, along with all necessary associated electrical components such as switches, terminations, and grounding kits required for full operational integration. These components must meet specified technical and safety standards to ensure reliable performance in utility or campus electrical distribution networks. The equipment is intended for delivery and installation at an unspecified location under the jurisdiction of the Board of Regents of the University System of Georgia, with performance expected to align with the functional and operational demands of the Georgia public university infrastructure. The solicitation, issued under the NAICS code 423610 for Electric and Other Utilities Distribution, is structured as a subcontract and was posted on August 7, 2026, with a firm response deadline of September 11, 2026, at 7:00 PM. While no set-aside classification or point of contact is provided, the procurement is managed through the Georgia state procurement system via the designated UI link. Suppliers must ensure compliance with all technical specifications, delivery timelines, and installation readiness requirements without detailed performance location information provided, implying that final site details may be coordinated directly after award.

Board Of(university System of Georgia) Regents

POSTED

DEADLINE

in about 1 month

Cable & Component Supply (Materials Only)The contract titled Cable & Component Supply Materials Only is a subcontract solicitation issued by the Department of Information Resources in Texas, seeking the provision of cabling materials without any installation services. The scope includes copper and fiber optic cables, patch panels, jacks, racks, and associated hardware necessary for network infrastructure, with the supplier responsible solely for delivering compliant products that meet specified technical standards. The solicitation was posted on August 7, 2026, with a response deadline of September 24, 2026, and is classified under NAICS code 423610 which pertains to telecommunications equipment and supplies merchant wholesalers. All materials must be delivered to an undetermined location within Texas, as the place of performance is not explicitly defined, and no set-aside provisions are specified for small or disadvantaged businesses. Interested parties must respond through the Texas SmartBuy portal at the provided web link, and the contract does not include point of contact details, suggesting all communications should be handled via the procurement platform.

Department of Information Resources

POSTED

DEADLINE

in about 1 month

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Crossarm Weathered Steel

Solicitation # Z4957

The contract specifies the procurement of weathered steel crossarms measuring 4 inches by 4 inches by 9 feet 4 inches, designed for tangent applications and fabricated from ASTM weathering steel in compliance with NES Specification 33-506R4 and Drawing LSK-1254-F. Each crossarm must be accompanied by material certifications verifying the use of certified weathering steel, ensuring structural integrity and corrosion resistance. Deliveries are to be made on open flatbed trucks or trailers without packaging that could compromise handling or inspection upon arrival. Only approved manufacturers including REINKE, SFORMS, THOMAS-B, UNIVERSA, HUGHESB, DIXIE, FALCONS, and DIS-TRAN are eligible to supply these crossarms, and all shipments must fully align with the technical and compliance requirements outlined in the specification. The solicitation, titled Crossarm Weathered Steel with identification number Z4957, was posted on August 10, 2026, with a response deadline of August 14, 2026. Issued by Nashville Electric Service under the Tennessee State and Local Government (SLED) procurement category, the contract is intended for performance in Nashville, Tennessee. Primary contact for inquiries and submissions is Tiffany Caruthers, Procurement Contact, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593. All bids must be submitted through the official vendor portal at the provided UI link, and no set-aside provisions are in effect for this solicitation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # Z4969

The contract pertains to a fuse holder assembly specifically designed for capacitor banks operating at 69,000 volts, used at four locations: North, Radnor, South, and West. The approved part for this assembly is the COOPER FN11B1, and only this manufacturer’s component is accepted for compliance. The solicitation, issued by Nashville Electric Service under solicitation number Z4969, is targeted at suppliers capable of providing this critical electrical component for high-voltage infrastructure. The solicitation was posted on August 10, 2026, with a firm response deadline of August 13, 2026, at 7:00 PM Eastern Time. This procurement falls under the state and local government (SLED) category, with performance required in Nashville, Tennessee. All bids must be submitted through the vendor portal linked to the solicitation, and inquiries should be directed to the primary point of contact, K. Kegley, via email or phone provided.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Solicitation # Z4965

The contract is for a one-size-fits-most aerial lift harness featuring an H-style full body design with a 3-inch back ring, constructed from durable nylon webbing and equipped with pass-through friction buckles and an adjustable chest strap. The harness must meet ASTM and OSHA safety standards, and only specific approved manufacturers and part numbers—BUCKNGHMU64A23H6E00 and BASHLIN662AD-O—are acceptable for compliance. This solicitation, titled Lift Harness and identified by number Z4965, was posted on August 10, 2026, with a response deadline of August 17, 2026, at 7:00 PM. The solicitation is issued by Nashville Electric Service under the Tennessee state government, with performance required in Nashville, Tennessee. All proposals must be submitted through the vendor portal linked in the posting, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided.

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

Solicitation # Z4964

The contract solicits X Large premium grain cowhide driver gloves with the Gunn pattern and shirred elastic cuff, specified as GLOVE LEATHER XL ALL COW PREMIUM GRAIN LEATHER DRIVERS GLOVE, with approved part numbers BEARKNUGL-338-XL, KUNZGL556-XL, and YOUNGSTO11-3255-60-XL. The solicitation is issued under number Z4964 by Nashville Electric Service, a state, local, and education agency based in Nashville, Tennessee, with performance required locally in the same city and state. The solicitation was posted on August 10, 2026, and responses must be submitted by August 17, 2026, at 7:00 PM local time. Procurement inquiries should be directed to K. Kegley at kkegley@nespower.com or 615-747-3572. The solicitation is accessible via the vendor portal at the provided URL, and no set-aside classification or NAICS code is specified, indicating an open competition for qualified suppliers.

Other Leather and Allied Product Manufacturing

POSTED

DEADLINE

Solicitation # Z4960

The contract solicits safety glasses meeting ANSI Z87.1 standards, with two specified variants: silver mirror and brown flash mirror, both featuring anti-scratch coatings. Approved part numbers include BOUTON250470005, CROSSFIR263, and CROSSFIR29117, and the quantities required are 960 units total, with two distinct item numbers listed for the two mirror types. The procurement is issued by Nashville Electric Service under solicitation number Z4960, with a response deadline of August 13, 2026, and a posting date of August 10, 2026. The solicitation is classified under a SLED agency type, with performance and administrative responsibilities centered in Nashville, Tennessee. Contact for procurement inquiries is K Kegley, reachable via email and phone provided. All supplied glasses must strictly comply with ANSI Z87.1 safety requirements to qualify for award.

Ophthalmic Goods Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4963

The contract solicits a line block with a 3-inch sheave mounted on ball bearings to ensure minimum friction, designed to accommodate rope up to 5/8 inch in diameter. The unit must include a safety hook and a swivel eye, feature a side-opening design for ease of use and installation, and be sourced from approved manufacturers or part numbers Hastings 3550 or SHERMHLB-472. The solicitation is issued by Nashville Electric Service under the state of Tennessee, targeting public sector procurement through a SLED agency classification, with responses due by August 13, 2026, at 7:00 PM local time. All proposals must be submitted through the vendor portal linked in the solicitation, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided. The place of performance is Nashville, Tennessee, with no specific set-aside type indicated.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # Z4959

The contract solicits the supply of 65-foot steel poles with a minimum capacity of 65 ft-kips at ground level, meeting the structural equivalence of Class H3 standards. Each pole must be hot dipped galvanized in full compliance with ASTM A123 to ensure long-term corrosion resistance and durability under environmental exposure. All fabrication details, including drilling patterns and engineering specifications, must adhere strictly to the most current version of the NES Specification LSK-1212 to guarantee uniformity and compatibility with existing infrastructure. The poles must be sourced exclusively from approved manufacturers, with acceptable part numbers including CHM65H3, TAPP65H3, DIS-TRAN65H3, FTWORTH65H3, MDHENRY65H3, ROHN65H3, SABRECO65H3, V&SSCHU65H3, and VALMONT65H3, ensuring proven performance and regulatory compliance. The solicitation is issued by Nashville Electric Service under reference number Z4959, with a posted date of August 10, 2026, and a firm response deadline of August 21, 2026. It is categorized as a state and local government procurement, with performance located exclusively in Nashville, Tennessee. Procurement inquiries and submissions must be directed to Tiffany Caruthers, the designated procurement contact at tcaruthers@nespower.com. Interested parties must submit proposals through the official vendor portal at the provided URL before the stated deadline, ensuring full adherence to all technical, material, and compliance requirements outlined in the solicitation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # Z4962

The contract solicits the Flagman Vest, a Class 3 Level 2 arc-rated safety vest meeting ANSI/ISEA 107 standards, in size XL with a lime-yellow summer-weight woven mesh construction. The vest features a zipper front closure, orange trim, and segmented heat-transfer reflective tape for enhanced visibility, along with two chest pockets and two inside hip pockets on each side. It must bear a single-color NES logo in black ink. Only approved manufacturers with the specific part number ESTEXMF1616L-FR3Z4P-XL are acceptable. The solicitation is issued by Nashville Electric Service under solicitation number Z4962, targeting state and local government procurement, with responses due by August 14, 2026, at 7:00 PM CT. The contract is tied to performance in Nashville, Tennessee, and all inquiries should be directed to the primary procurement contact, K. Kegley, via phone or email provided.

Clothing and Clothing Accessories Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4967

The solicitation seeks a hand-line hook rated for 500 pounds, featuring a 3/8 inch diameter, an overall length of 6 and a half inches, and designed with two eyes for secure attachment. Approved manufacturers include BASHLIN with part number S35H and TALLMAN with part number 258, ensuring compliance with specified mechanical and safety standards. This item is intended for use in utility operations requiring reliable and durable equipment for manual handling tasks. The contract, identified by solicitation number Z4967, was posted on August 10, 2026, with responses due by August 14, 2026, at 7:00 PM. The procuring entity is Nashville Electric Service, a state and local government agency based in Nashville, Tennessee. All performance is expected to occur in Nashville, TN, and inquiries should be directed to K. Kegley, the primary procurement contact, via phone at 615-747-3572 or email at kkegley@nespower.com. The solicitation is accessible through the vendor portal at the provided UI link.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4966

The contract requires the supply of aHOLDER TOOL AERIAL 3 POCKET AERIAL TOOL HOLDER with exact dimensions of 35x14x8 inches, constructed from hard plastic and featuring three large pockets with steps and two bit pockets lined with one-inch inside diameter PVC. Only approved manufacturers and part numbers are accepted, specifically AMERISA SKU-011 and GLOBAL B011. The solicitation is issued by Nashville Electric Service under solicitation number Z4966, with a posted date of August 10, 2026, and a response deadline of August 18, 2026, at 7:00 PM. The procurement is categorized under SLED and the place of performance is in Nashville, Tennessee. All inquiries and submissions must be directed to the primary point of contact, K Kegley, via email at kkegley@nespower.com or phone at 615-747-3572, and submissions are to be made through the vendor portal at the provided uiLink.

Office Supplies (except Paper) Manufacturing

POSTED

DEADLINE

Universal Hotstick

Solicitation # Z4961

The contract calls for the procurement of Universal Hot Sticks measuring 40 feet in length, constructed with round tubular fiberglass sections featuring Sure-Lock joints and a disconnect hook. Each section must include a position indicator running the full length of the stick and a numerical measuring system for precise depth and reach verification. The product must fully comply with all applicable OSHA and ASTM safety standards to ensure operational reliability and worker protection. Only approved manufacturers and part numbers—UTILITYUSTS-40-EM and HASTINGSEV-40—are acceptable for bid submission. The solicitation, identified by number Z4961, was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the Tennessee state agency, with performance occurring in Nashville, TN. The procurement is categorized under SLED and is open to qualified vendors through the official vendor portal. All inquiries and submissions must be directed to the primary point of contact, K. Kegley, reachable via phone at 615-747-3572 or email at kkegley@nespower.com.

POSTED

DEADLINE

Solicitation # Z4968

The contract solicits a slotted impact socket that is a 3-in-1 design with 9/16 inch and 3/4 inch sizes, featuring a 12-point deep socket configuration and a 1/2 inch drive, engineered specifically to withstand high torque demands of impact drivers. The product must meet rigorous performance standards to ensure compatibility and safety under heavy-duty industrial use, with only the approved part number KLEIN66031 accepted. The solicitation is issued by Nashville Electric Service under solicitation number Z4968, targeting suppliers capable of delivering industrial-grade tools that meet precise engineering requirements for reliability in electric utility applications. The solicitation was posted on August 10, 2026, with responses due by August 13, 2026, and is open to vendors serving state, local, and education government entities. Performance must occur within Nashville, Tennessee, and the primary point of contact for procurement inquiries is K. Kegley, reachable via email at kkegley@nespower.com or by phone at 615-747-3572. Additional details and submission guidelines are available through the vendor portal link provided by Nashville Electric Service.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE