Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ADCOM Technologies Radio Hub

Active
20158431Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Customs and Border Protection is pursuing a sole source award to ADCOM Technologies for a proprietary Radio Hub System designed to integrate with existing communication repeaters to support mission-critical operations. This procurement is justified under the Revolutionary FAR Overhaul 13.101, which permits a single source when no other supplies or services meet agency requirements. The procurement falls under NAICS code 334290 for Other Communications Equipment Manufacturing and is set aside entirely for small businesses, with a size standard of 800 employees. Although no formal solicitation is being issued, interested parties may submit company capability information to the contracting officer by 12:00 p.m. E.T. on August 5, 2026, via email only to david.torres@cbp.dhs.gov. The contract will be awarded and performed at Fort Bliss, Texas, with the awarding office located in Washington, D.C., under the Department of Homeland Security’s Border Enforcement Contracting Division. All inquiries must be submitted electronically; phone calls are not accepted.

General Info

CBP sole-source award to ADCOM for proprietary Radio Hub System, small business set-aside, Fort Bliss, Texas, no solicitation, submissions due August 5, 2026.

Agency

Department Of Homeland Security → Border Enforcement Contracting DivisionView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

Fort Bliss, TX, 79918, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Border Enforcement Contracting Division
Contacts1 person available
OfficeWASHINGTON, DC, 20229, USA
Organization / Agency
Department Of Homeland Security → Border Enforcement Contracting Division
View Agency Profile
Office AddressWASHINGTON, DC, 20229, USA
Contacts
David Torres
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

In accordance with the Revolutionary FAR Overhaul (RFO) 13.101, Only One Responsible Source and No other Supplies or Services will satisfy agency requirements. Customs and Border Protection intends to negotiate a Sole Source Award with ADCOM Technologies for a Radio Hub System which is specifically designed to integrate with proprietary communication repeaters to use for operational support in achieving mission tasks by U.S. Customs and Border Protection (CBP). The NAICS code for this procurement is 334290, Other Communications Equipment Manufacturing. The Small Business size standard 800 employees. This notice of intent is not a request for quotations. No solicitation will be made available. Interested parties who wish to submit information about their companies’ capabilities can email the contracting officer no later than 12:00pm, E.T., 8/05/2026.  Information should be emailed to david.torres@cbp.dhs.gov, no phone calls accepted.

Similar Contracts

Same NAICS industry code

NAICS: 334290
New
DIBBS
CASE, ELECTRONIC COM
Solicitation # SPE4A7-26-T-607M
This contract pertains to the procurement of one electronic case, part number BSMU-B-CASE-TAN-018, identified by NSN 5895-01-701-4810, under solicitation SPE4A7-26-T-607M. The item is classified as a critical application item and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards. Packaging must adhere to ASTM D3951 with mandatory compliance to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement (RP001). Sampling and inspection follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Delivery is FOB origin with a required delivery date of June 2, 2027, and a 294-day lead time, with no tolerance for quantity variance. Inspection and acceptance occur at destination, and the item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, as designated in the contract. Documentation for source approval is required, and all government identification must be removed from non-accepted supplies. The contract includes specific unit of issue and packaging data, and all transport logistics are governed by DLA PROC NOTES C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
TRANSMITTER, TEMPERA
Solicitation # SPE4A6-26-Q-1252
This contract pertains to the procurement of two transmitter units, part number 6685-01-732-6391, designated as a critical application item from PYROMATION LLC, with a firm fixed price and no tolerance for quantity variance. Delivery is required within 115 days after award, with both inspection and acceptance occurring at the supplier’s origin. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and containerization, with marking adhering to MIL-STD-129 and no special markings applied. The item must be palletized per DLA guidelines and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise specified. Documentation for source approval is governed by RC001, and government identification must be removed from non-accepted supplies per RQ011. The unit of issue complies with DoD standards, and transportation procedures follow DLAD procedural notes. The contract is linked to Purchase Request 7014171388 with a required ship date of October 15, 2025.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334290
New
DIBBS
DISPLAY UNIT
Solicitation # SPE4A7-26-T-607G
This contract outlines the procurement of a commercial off the shelf display unit identified by part number 998-4230-00 and NSN 5895-01-733-3331, with a total quantity of four units required. The item must be delivered FOB origin within 300 days of contract award, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and unit containerization, and all marking must follow MIL-STD-129 with no special markings required. Palletization is governed by DLA packaging requirements, and the delivery address is specified as the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a unit price of $4.00 and a total contract value of $16.00. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. The contract requires adherence to DLA procurement procedures for transportation and freight, and the solicitation was issued under contract number SPE4A7-26-T-607G with a response deadline of August 11, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
Federal
ANTENNA SUBASSEMBLY
Solicitation # SPRMM126QGE91
This contract pertains to the procurement of an ANTENNA SUBASSEMBLY under emergency acquisition flexibilities provided by FAR Part 18, with performance governed by strict quality, inspection, and documentation standards. The item must be manufactured to meet the designated CAGE code 91417 and reference number 3238924-101, with all physical identification complying with MIL-STD-130 Revision N. The contractor is responsible for all inspection activities unless otherwise directed, and must maintain complete records for 365 days after final delivery. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer and must be classified using one of six standardized change codes, with substitutions only allowed after formal review and documentation. Packaging must adhere to MIL-STD-2073, and the government reserves the right to conduct inspections at source or upon delivery. The solicitation mandates electronic submission of invoices and receiving reports via WAWF and requires vendors to be authorized distributors of the original manufacturer, with proof of authorization submitted with their offer. Award will be based on the Lowest Price Technically Acceptable methodology, with offers valid for a minimum of 90 days. Contractors must register for the PIEE EDA portal to access order information and comply with mandatory use of Workflow Pro for payment processing. The contract incorporates several government-wide clauses including mandatory small business representations, security prohibitions, veteran equity requirements, and compliance with National Defense priority ratings. Technical data is not provided, and all applicable military specifications must be obtained independently through official DOD sources. Notifications for contract modifications should be received via NAVSUP WSS, and any changes to production facilities require a $250 administrative cost reduction and written approval, with strict constraints on delivery timing, location, and f.o.b. point.
SPRMM1 DLA Mechanicsburg

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334290
New
Federal
COMMUNICATIONS CONT
Solicitation # N0010426QTB90
This contract concerns the repair of COMMUNICATIONS CONT equipment under solicitation N0010426QTB90, with a required Repair Turnaround Time (RTAT) of 170 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The contract mandates strict adherence to technical standards including MIL-STD-130 for marking, compliance with manufacturer specifications, and performance under a firm-fixed-price structure. All repairs must be conducted in accordance with approved technical documentation and government-approved procedures, with no substitutions permitted without prior written approval from the NAVICP-MECH Contracting Officer. The government requires independent inspection and final acceptance of all repaired items, with records maintained for at least 365 days post-final delivery. Freight is FOB Origin, and the Navy manages all logistics via the CAV system. Failure to meet the RTAT triggers a per-unit, per-month price reduction, with a defined maximum cap, and may lead to termination for default, though excusable delays such as government-caused postponements are exempted. The contract includes several mandatory clauses covering cybersecurity maturity certification, Buy American compliance, small business subcontracting requirements, and the mandatory use of Workflow Pro’s Assist Module for invoicing and receiving. The award will be bilateral, requiring the contractor’s written acceptance before execution, and the government reserves the right to exercise an option for increased quantities within 365 days. Only authorized distributors of the original manufacturer may submit offers, and proof of authorization must accompany proposals. All technical documents provided by the Navy include distribution statements that dictate access and dissemination limits, and contractors must comply with security prohibitions and export control regulations. The contracting officer is Alison E. Harper, and all correspondence, quotes, and submissions must reference the specified RMA details, CAGE codes, unit pricing, and RTAT, with final delivery expected to meet the Government’s standard of quality and timeliness.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334290
New
Federal
PANEL,GROUND DETECT
Solicitation # N0010426QJC02
The contract pertains to the repair of seven units of the PANEL,GROUND DETECT (NSN 7HH 5895 015780922, P/N 104110-100) under a firm fixed-price arrangement, with all costs including receipt, teardown, evaluation, repair of unwholesome or damaged conditions, missing parts, and CAV reporting to be fully absorbed by the contractor. The work must comply with MIL-STD packaging, MIL-STD-130 marking, and cybersecurity requirements including DFARS 252.204-7008 and 252.204-7012, and must include IUID labeling unless the new unit price is below $5,000. The contractor is required to submit a detailed quote within 15 days, containing repair and new unit pricing, teardown and evaluation fees, RTAT, throughput constraints, induction expiration date, and a cost breakdown with profit rate. Pricing is contingent on meeting stated RTATs; failure to meet these will trigger a reconciliation modification and per-unit price reduction, without waiving the government’s right to terminate for default. The repair must adhere to the manufacturer’s technical standards and be performed in accordance with approved drawings and directives, with no substitutions permitted without written approval. All transportation to and from the repair site is government-funded. The contract mandates compliance with Buy American provisions, cybersecurity maturity certification, and small business subcontracting requirements, and requires the contractor to be an authorized distributor of the original manufacturer, with proof provided in writing. Records of all inspections conducted by the contractor must be maintained for 365 days after final delivery and made available to the government upon request. The performance location and inspection point are to be specified by the contractor, and all deliveries must be FOB source. The government retains full inspection rights and may conduct acceptance testing independently. The contract includes limitations on liability, payment via electronic funds transfer, prohibition of unauthorized subcontracting, and adherence to the Navy’s mandatory Workflow Pro assist module. The award will require bilateral acceptance, and the quote must remain valid for 180 days. The solicitation number is N0010426QJC02, with response due by August 17, 2026, and the contracting office is located in Mechanicsburg, PA, under the Department of Defense and NAVSUP Weapon Systems Support.
Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
Federal
Handsets and Mobile Base System
Solicitation # W911YP26QA007
The Utah Army National Guard, through the U.S. Property and Fiscal Office for Utah Purchasing and Contracting, is soliciting quotes for the procurement of Handsets and a Mobile Base System under a Total Small Business Set-Aside, with the NAICS code 334290 for Other Communications Equipment Manufacturing. The solicitation, numbered W911YP26QA007, was issued on July 22, 2026, and responses are due by 12:00 PM EST on August 28, 2026, submitted electronically to Kristinna A. Braun at kristinna.a.braun.civ@army.mil. The contract is structured as a Firm-Fixed Price (FFP) award using the Lowest Price Technically Acceptable (LPTA) evaluation method, meaning the contract will be awarded to the offeror submitting the lowest-priced proposal that meets all mandatory technical requirements without trade-offs. The deliverables include one Mobile Base Station with UHF/VHF radio capability, 15W output, encryption, and remote control, and three Handsets/Transceivers designed for use with the base system, all of which must be uniquely identified with a two-dimensional Data Matrix symbology per MIL-STD-130 and ISO/IEC 16022 standards. Each item must be marked with a Unique Item Identifier (UII) that includes enterprise and serial data, reported to the DoD UID Registry, and compliant with ISO/IEC 15434 syntax. Delivery is required to 7602 South Airport Road, West Jordan, UT, with all transportation costs and risks borne by the contractor until delivery, and inspection and acceptance will occur at the same location. The period of performance is 60 work days from the award date. Offerors must be small businesses and represent their status in the System for Award Management, with additional certifications required for socioeconomic categories such as SDB, WOSB, EDWOSB, SDVOSB, or HUBZone if applicable. All proposals must include a Unique Entity Identifier (UEI) and CAGE code, and must affirmatively disclose whether they provide covered defense telecommunications equipment or services under 252.204-7018. The contract incorporates numerous FAR and DFARS clauses regarding payment by electronic funds transfer, Buy American provisions, sustainable products, cybersecurity, supply chain risk, prohibitions on hex
W7N3 Uspfo Activity Ut Arng

POSTED

about 13 hours ago

DEADLINE

in 25 days
View Details
NAICS: 334290
New
Federal
Quick Hub Locker
Solicitation # W911S226U3911
The Quick Hub Locker contract specifies a two-part asset management locker system centered on an 11-door primary control unit that serves as the hub for all connected auxiliary units. This main unit must provide full access control, data recording, and synchronization capabilities for the entire system, with no separate interface required for operation. It includes onsite installation, setup, and initial user training along with a warranty. A secondary 19-door auxiliary unit is also required to expand capacity and must integrate natively with the main unit, drawing all management functions through its control system without any need for standalone operation. Both units must operate as a unified hardware ecosystem under a shared cloud architecture, ensuring real-time data flow and centralized oversight across all compartments. The system requires a mandatory three-year cloud service subscription to enable software functionality, system updates, and remote management, with no operational capability granted without this continuous license. All hardware components must synchronize seamlessly over this unified cloud platform to ensure consistent performance, access logging, and asset tracking. The contract is issued under solicitation W911S226U3911 as a Small Business Set Aside, with performance centered at Fort Drum, New York. Bids are due by August 10, 2026, and the point of contact is Kevon Williams of the Department of Defense. The NAICS code 334290 classifies this as an other electrical equipment and component manufacturing procurement.
W6QM Micc-Ft Drum

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334290
New
DIBBS
Connector Assembly Manufacturing or SupplyThe contract entails the manufacture or supply of 374 units of Connector Assembly identified by NSN 5935011652934, with strict compliance required to the MIL-DTL-38999N specification and all applicable defense quality standards. This subcontract is issued under the NAICS code 334290 and is managed by the Nuclear Reactor Program within the Department of Defense, with performance obligations centered at Robins Air Force Base, Georgia, zip code 31098-1887. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026, with no set-aside designation applied, indicating open competition among qualified contractors. All deliverables must meet the exacting technical and quality benchmarks expected for defense-grade electrical interconnect components used in critical military and aerospace applications.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334290
New
DIBBS
INSTALLATION KIT, ELECT
Solicitation # SPE4A0-26-T-4019
The contract is for the procurement of four installation kits for electronic equipment, identified by NSN 5895-01-626-0556, with delivery required within five days after award to a military location in Poland. The solicitation is a total small business set-aside under NAICS code 334290, issued by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with proposals due by August 5, 2026. All kits must be fully assembled, properly packaged in compliance with MIL-STD-2073-1E and DLA RP001, and marked according to MIL-STD-129 including barcoding and detailed contents lists. Packaging must use preservation method code 10 (Clng/Dry) with no preservation or wrap materials applied, and items must be shipped FOB origin. The contract includes stringent export control obligations under ITAR or EAR, limiting access to technical data to contractors approved by DLA, holding valid JCP certification, and having completed mandatory training. Cybersecurity requirements mandate CMMC Level 2 compliance through either a self-assessment or certified third-party assessment, and safeguarding of covered defense information is governed by DFARS 252.204-7012 and NIST SP 800-171 assessments. Hazardous materials must comply with OSHA HazCom standards and DFARS 252.223-7001, with prohibitions on hexavalent chromium and restricted storage or disposal of toxic substances without written approval. Radioactive materials require advance notification and specific labeling. All deliveries are subject to government inspection and acceptance at destination using zero-based sampling plans with stringent AQLs—0.1 for critical, 1.0 for major, and 4.0 for minor defects. Contractors must be registered in SAM, provide a UEI and CAGE code, and confirm small business status, with additional reporting required if offering covered telecommunications equipment or participating in a joint venture. Invoicing must be processed electronically through WAWF, and accelerated payments to small business subcontractors are mandated. No pricing details are disclosed in the solicitation, and contract type remains unspecified, but fixed-price terms are implied through referenced clauses.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 334290
New
Federal
Domestic Manufacturing and Assembly CoordinationThe contract requires the final U.S.-based integration and assembly of a surgical light, HD camera, and remote control system to comply with domestic manufacturing standards, ensuring all components are assembled within the United States to meet federal sourcing and production requirements. The work is specifically centered on combining these critical medical devices into a fully functional, compliant system suitable for use in healthcare environments, with the final assembly to be conducted at the designated performance location in West Roxbury, Massachusetts, 02132. This subcontract opportunity is issued by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01, with a response deadline of August 15, 2026, at 8:30 PM Eastern Time. The NAICS code 334290 categorizes the effort under other electronic equipment manufacturing, indicating the technical nature of the assembly process and the need for expertise in medical-grade electronics integration. While no set-aside designation is specified, the requirement clearly prioritizes domestic production, making it essential for bidders to demonstrate capable facilities, workforce, and supply chain alignment within the United States to successfully fulfill the contract obligations.
241-NETWORK Contract Office 01 (36C241)

POSTED

4 days ago

DEADLINE

in 12 days
View Details
NAICS: 334290
New
Federal
Remote Control System DevelopmentThe contract seeks the design and supply of a remote control system tailored for non-contact adjustment of surgical light settings, including focus, intensity, and positioning, to enhance precision and hygiene in operating room environments. The system must be engineered for seamless integration with existing surgical lighting infrastructure, ensuring reliability, responsiveness, and compatibility with sterile procedural requirements. Development must adhere to medical device standards and prioritize user ergonomics, electromagnetic compatibility, and fail-safe operation under high-stakes clinical conditions. The contract is classified as a subcontract under NAICS code 334290, targeting advanced medical equipment manufacturing, and is administered by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01. Proposals are due by August 15, 2026, with performance expected to take place in West Roxbury, Massachusetts, at a ZIP code of 02132. While no set-aside provisions are specified, submission must align with federal procurement regulations governing medical technology suppliers, and bidders are expected to demonstrate technical feasibility, proven experience in clinical device development, and a clear path to scalable production.
241-NETWORK Contract Office 01 (36C241)

POSTED

4 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Homeland Security → Border Enforcement Contracting Division

Same awarding agency

NAICS: 424950
Federal
Grounds Equipment and Supply ProvisionThe contract titled Grounds Equipment and Supply Provision is a small business set-aside solicitation issued by the Border Enforcement Contracting Division under the Department of Homeland Security, aimed at securing the supply of essential consumables and materials for grounds maintenance and snow removal operations. The required items include de-icing agents, fuel, mower blades, and trash bags, all critical to maintaining operational readiness and safety at the designated performance location in Highgate Center, Vermont, with the zip code 05459. This subcontract is governed under NAICS code 424950, which classifies it under wholesale trade of miscellaneous durable goods, and is exclusively available to small businesses as defined by the Small Business Administration. All responses must be submitted by August 4, 2026, at 4:00 PM Eastern Time, following the solicitation’s posting on July 27, 2026. The contract emphasizes compliance with federal procurement standards and prioritizes qualified small businesses with the capacity to deliver consistent, reliable supplies in alignment with the operational demands of federal grounds and snow removal activities. While specific delivery schedules and volume requirements are not detailed in the public metadata, bidders are expected to demonstrate capability to meet ongoing supply needs at the Highgate Center site, ensuring uninterrupted service throughout seasonal operational cycles.
Paint, Varnish, and Supplies Merchant Wholesalers

POSTED

8 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 561730
Federal
Snow Removal and Winter Storm ResponseThe contract pertains to on-call snow plowing, shoveling, and de-icing services for driveways, parking areas, and sidewalks to maintain safe access during and after winter storms. Services are required at a location in Highgate Center, Vermont, with a zip code of 05459. This is a subcontract set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside provision, classified under NAICS code 561730 for snow removal and de-icing services. The solicitation was posted July 27, 2026, and responses must be submitted by August 4, 2026, at 4:00 PM. The contracting entity is the Border Enforcement Contracting Division within the Department of Homeland Security, seeking qualified small business contractors to provide timely and reliable winter storm response services.
Landscaping Services

POSTED

8 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 561730
Federal
Routine Grounds Maintenance ServicesRoutine Grounds Maintenance Services are being procured under a Total Small Business Set-Aside for a CBP facility located in Highgate Center, Vermont, with a NAICS code of 561730. The contract requires ongoing maintenance including regular mowing, trimming, edging, and removal of debris from driveways, parking areas, and sidewalks to ensure site appearance and safety compliance. The solicitation was posted on July 27, 2026, and responses are due by August 4, 2026, at 4:00 p.m. The award will be administered by the Border Enforcement Contracting Division within the Department of Homeland Security, with performance limited to the specified location in Highgate Center. This subcontract opportunity is exclusively reserved for small businesses as defined by the SBA.
Landscaping Services

POSTED

8 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 561730
Federal
Grounds Maintenance/Snow Removal Services, BP Station, Swanton, VT
Solicitation # 70B03C26Q00000237
This contract solicits grounds maintenance and snow removal services at the BP Station located at 104 Raven Drive, Highgate Center, Vermont, under a total small business set-aside designated for NAICS code 561730, ensuring only certified small business vendors are eligible to respond. The procurement is issued as a combined synopsis and solicitation in accordance with FAR Subpart 12 and is managed by the Border Enforcement Contracting Division of the Department of Homeland Security, with the solicitation number 70B03C26Q000000237. Interested vendors must submit proposals by the deadline of August 4, 2026, at 4:00 p.m. Eastern Time, following a mandatory one-time facility walk-through scheduled for July 30, 2026, at 11:00 a.m. Eastern Time, led by point of contact Kelly Colling. The primary point of contact for contract inquiries is Robert Kay, reachable via email at Robert.J.Kay@cbp.dhs.gov or phone at 317-614-4824, with all official correspondence and submission handled through the SAM.gov portal. The place of performance is in Vermont, while the contracting office is based in Washington, D.C.
Landscaping Services

POSTED

8 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 541618
Federal
Prohibited Telecommunications Equipment Compliance ReportingThe contract requires comprehensive screening of all ATV components and their supply chains to identify and exclude prohibited telecommunications equipment, specifically targeting vendors such as Huawei and ZTE, in strict adherence to NDAA Section 889. This compliance effort demands thorough due diligence across Tier 1 and lower-tier suppliers to ensure no covered telecommunications equipment or services are embedded in the delivered components, with documentation to validate the absence of such items throughout the entire procurement chain. The contractor must implement robust verification processes, maintain detailed records, and submit formal compliance reports to demonstrate adherence to federal restrictions on compromised telecom hardware. This is a total small business set-aside under SBA guidelines classified under NAICS code 541618 for other scientific and technical consulting services, and is issued by the Border Enforcement Contracting Division of the Department of Homeland Security. The performance location is designated as Artesia with a zip code of 88210, and all responses must be submitted by August 5, 2026, at 11:00 PM Eastern Time. The contract is structured as a subcontract, indicating the winning entity will be working under a prime contractor to support DHS objectives, and the requirement underscores the critical need for supply chain transparency and national security protections within equipment used in border enforcement operations.
Other Management Consulting Services

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 541611
Federal
Small Business Subcontracting and Mentor-Protégé Program AdministrationThe contract calls for the comprehensive administration of the Department of Homeland Security’s Mentor-Protégé Program and Small Business Subcontracting Plan, with responsibilities encompassing the full lifecycle of tracking, reporting, and mentoring activities designed to support small business growth and subcontracting compliance. The work focuses on ensuring adherence to SBA regulations under a Total Small Business Set-Aside, requiring detailed oversight of mentor-protégé relationships, performance metrics, and subcontracting goals within the DHS Border Enforcement Contracting Division. All activities must be conducted in accordance with FAR 19.5 and centered on enhancing small business participation in federal contracting. The contract is classified under NAICS code 541611 and is limited to small businesses, with performance centered in Artesia, New Mexico, at zip code 88210. Proposals are due by August 5, 2026, and the opportunity was posted on July 22, 2026. The successful offeror will be expected to manage program integrity through accurate data collection, timely reporting to federal stakeholders, and active mentorship engagement to foster sustainable small business development within DHS supply chains. No specific point of contact is listed, and all inquiries must be directed through the official SAM.gov portal.
Administrative Management and General Management Consulting Services

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 541512
Federal
CUI Safeguarding and Compliance SupportThe contract requires the implementation and ongoing monitoring of NIST SP 800-171 security controls to safeguard Controlled Unclassified Information across all contractor systems, ensuring compliance with federal standards for protecting sensitive but unclassified data. This effort is critical for maintaining the integrity and confidentiality of information handled by the contractor in support of the Department of Homeland Security’s Border Enforcement Contracting Division, with performance obligations centered in Artesia, NM, under a total small business set-aside designation. The work demands a robust cybersecurity framework aligned with NIST guidelines, including regular assessments, documentation of control adherence, and prompt remediation of identified gaps to maintain continuous compliance. All proposals must be submitted by August 5, 2026, under the North American Industry Classification System code 541512 for computer systems design services, and the contract is structured as a subcontract opportunity. The contractor must demonstrate proven experience in securing CUI environments, possess the technical capability to integrate NIST controls into existing IT infrastructure, and maintain the ability to sustain compliance over the life of the agreement. Failure to meet these requirements may result in non-compliance penalties, loss of access to sensitive data, or contract termination. The procurement is exclusive to small businesses as defined by the SBA, and performance will be closely tied to adherence to federal cybersecurity protocols without any deviations permitted.
Computer Systems Design Services

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
Federal
Specialized Packaging, Marking, and FOB Destination LogisticsThe contract requires specialized packaging, labeling, and delivery of ATVs to multiple U.S. Border Patrol sectors under F.o.B. Destination terms, meaning the contractor assumes full financial and physical risk until the ATVs are delivered to their final destination. All logistics must ensure secure handling and clear marking to meet operational needs across various border locations, with the primary place of performance identified as Artesia, NM, 88210. The contract is structured as a subcontract set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, aligning with NAICS code 484220 for truck transportation services. The solicitation was posted on July 22, 2026, with a firm response deadline of August 5, 2026, at 11:00 PM, and is managed by the Border Enforcement Contracting Division of the Department of Homeland Security.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 423120
Federal
All-Terrain Vehicle (ATV) Supply and ConfigurationThe contract solicits the supply of new Yamaha all-terrain vehicles (ATVs) configured to meet specific government requirements for use by U.S. Border Patrol operations. The ATVs must be fully assembled, pre-delivery inspected, and packaged according to federal specifications to ensure operational readiness and compliance with agency standards. The work is to be performed under a total small business set-aside, reserved exclusively for small businesses as defined by the Small Business Administration, and is classified under NAICS code 423120 for motor vehicle parts and accessories merchant wholesalers. The place of performance is designated as Artesia, New Mexico, with a response deadline of August 5, 2026, and the contract is managed by the Border Enforcement Contracting Division within the Department of Homeland Security. The procurement is structured as a subcontract and emphasizes strict adherence to technical, logistical, and compliance criteria to support mission-critical border security efforts.
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 336999
Federal
Yamaha All-Terrain Vehicles (ATVs)
Solicitation # 70B03C26Q00000117
The U.S. Customs and Border Protection, under the Department of Homeland Security, is soliciting quotes for 285 Yamaha All-Terrain Vehicles (ATVs) through a combined synopsis and solicitation issued under the Revolutionary Federal Acquisition Regulation Overhaul Part 12. This Request for Quotes, identified as 70B03C26Q00000117, is exclusively for small business concerns set aside under NAICS code 336999 with a 1000-employee size standard and includes a Non-Manufacturer Rule Class Waiver, allowing small businesses to supply the product even if they are not the manufacturers. The ATVs must strictly comply with the specifications detailed in Attachment 1 – Statement of Work, and each offeror must submit an authorized manufacturer distribution letter along with their quote to be eligible for award. The acquisition’s Product Service Code is 2340, and the place of performance is Artesia, New Mexico, with deliveries to be made to this location. Proposals must be submitted electronically via email to Jesus Solis at jesus.solis@cbp.dhs.gov no later than 5:00 PM Mountain Standard Time on August 5, 2026, with the subject line clearly indicating “Response to RFQ 70B03C26Q00000117: Yamaha ATVs.” All submissions must include a completed Attachment 2 – Pricing Sheet that remains valid for at least 60 days after the solicitation close. Applicants are required to submit sufficient technical specifications for review and must also complete the Past Performance and Prior Delivery Order Experience Questionnaire. Questions about the solicitation must be submitted by email no later than 5:00 PM Mountain Standard Time on July 31, 2026, and only questions received by this deadline will be addressed. The government retains the right to reject late or noncompliant submissions and will award the contract to the offeror providing the best value based on conformance to requirements.
All Other Transportation Equipment Manufacturing

POSTED

13 days ago

DEADLINE

in 2 days
View Details
NAICS: 541921
Federal
Photography ServicesThe contract entails professional photography services focused on outreach efforts, including capturing event coverage, conducting portrait sessions, and performing image editing to ensure the content is suitable for distribution across various media platforms. It is classified under the NAICS code 541921, which pertains to specialized photography services. The contract is a subcontract issued by the Border Enforcement Contracting Division within the Department of Homeland Security. The solicitation or posting date is May 7, 2026. Specific details such as the solicitation number, type of set-aside, organization type, and precise location of the work or office remain unspecified. The work is intended to support outreach initiatives, likely involving visual documentation and media readiness aligned with the Department's communication needs.
Photography Studios, Portrait

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 512230
Federal
Radio and Audio Content ProductionThe contract involves the production of audio content tailored for both broadcast and digital platforms, encompassing key services such as scriptwriting, voice recording, sound editing, and format optimization to ensure high-quality output suitable for various media channels. It is classified under the NAICS code 512230 and is structured as a subcontract arrangement. The contract was posted on May 7, 2026, by the Border Enforcement Contracting Division within the Department of Homeland Security. This engagement aims to deliver professional audio materials that meet the agency’s communication needs, likely supporting public information and outreach efforts. While specific details such as the solicitation number, place of performance, and point of contact are not provided, the contract underscores a targeted focus on comprehensive audio production services to enhance the effectiveness of broadcast and digital messaging for homeland security initiatives.
Music Publishers

POSTED

3 months ago

DEADLINE

N/A
View Details