Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Adhesive Supply and Delivery

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the supply and delivery of 12 boxes of industrial adhesive identified by NSN 804001429193 to a U.S. Army warehouse located in Belton, Texas. All items must comply with Defense Logistics Agency packaging and labeling standards, ensuring full traceability throughout the shipping process. The contract falls under the NAICS code 325998 and is classified as a subcontract within the Department of Defense procurement framework. It was posted on July 16, 2026, and is managed by the Defense Logistics Agency, which oversees compliance with federal supply chain protocols. The delivery location and adherence to standardized logistics procedures reinforce the requirement for precise documentation and accountability from vendor to receipt.

General Info

12 boxes of industrial adhesive to be delivered to Belton, Texas, per DLA standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES26F63FD.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ADHESIVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 12 boxes of industrial adhesive (NSN: 804001429193) to a U.S. Army warehouse in Belton, TX, compliant with DLA packaging, labeling, and traceable shipping requirements.

Similar Contracts

Same NAICS industry code

DRY CHEMICAL, FIRE EXTI

Solicitation # SPE8E6-26-T-4448

This contract, identified as SPE8E6-26-T-4448, is for the procurement of 45 units of dry chemical fire extinguishers, specifically Tyco Fire Products LP part number 9336. The items are to be delivered FOB Destination to the DLA Distribution Barstow Central Receiving Warehouse in California. The required delivery date is January 27, 2027, with a delivery window of 68 days. The agreement includes strict compliance with DLA packaging and marking standards, including MIL-STD-129 and RP001. Because the items are classified as hazardous materials, the supplier must provide Safety Data Sheets and labels in accordance with OSHA Hazard Communication Standards and 29 C.F.R. 1910.1200. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required.

BARSTOW CENTRAL RECEIVING WHSE

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE8E7-26-T-3747

This contract, identified as SPE8E7-26-T-3747, is for the procurement of 2,616 high-grade synthetic filament paint brushes. The brushes must adhere to specific technical dimensions, including a 76 mm size, a part length of 3.313 inches, and a thickness of 0.813 inches, in accordance with basic CID A-A-3192A. The order is managed under NSN 8020005974764 and is subject to DLA master lists of technical and quality requirements, as well as regulations regarding the removal of government identification from non-accepted supplies. Delivery is set for FOB Origin with a required delivery date of March 5, 2027, and a need ship date of March 1, 2027. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. The final destination for both parcel and freight shipping is the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination point.

POSTED

about 17 hours ago

DEADLINE

FLUX, SOLDERING

Solicitation # SPE8E5-26-T-4162

This contract is for the procurement of 158 quarts of soldering flux, identified as a commercial item under Federal Commercial Item Description A-A-51145 Type 1, Form B. The order is managed by DLA Distribution San Joaquin with a required delivery date of December 23, 2026, and a need ship date of March 1, 2027. Delivery is set as FOB Destination to the facility in Tracy, California. The agreement mandates strict adherence to safety and quality standards, including the prohibition of intentionally added mercury and compliance with the Hazard Communication Standard for the submission of Safety Data Sheets and labels. Packaging and marking must follow MIL-STD-129 and ASTM-D3951-15, with specific requirements for palletization and passive RFID tagging. While the material does not have a shelf life requirement, the contractor must ensure all quality conformance inspections and government identification removal protocols are met.

DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E9-26-T-3690

This contract, identified as SPE8E9-26-T-3690, is a solicitation from the Department of Defense for the procurement of 20 units of identification markers under NSN 7690-01-605-4929. The order specifies a delivery timeframe of 167 days after the order date, with an original required delivery date of November 15, 2026, and a need ship date of March 1, 2027. Delivery is set as FOB Origin, with the inspection and acceptance points located at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement incorporates strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking guidelines. A critical environmental restriction is placed on the use of mercury, prohibiting its intentional addition to hardware except for specific functional exceptions such as batteries or sensors. The contract also mandates the removal of government identification from any non-accepted supplies and requires adherence to the DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

SOULTION, BRUSH PLATING

Solicitation # SPMYM226Q0207

This solicitation, issued by DLA Maritime - Puget Sound under solicitation number SPMYM226Q0207, is for brush plating solutions. The opportunity is a total small business set-aside under NAICS code 325998. Quotes must be submitted via email to the designated point of contact by September 3, 2026, at 3:30 pm PST. Delivery is required as FOB Destination to Bremerton, Washington. To be considered responsive, bidders must submit a signed and completed solicitation including contractor information, cage codes, point of contact details, pricing, lead times, and manufacturer information. Contractors required to implement NIST SP 800-171 must provide a current assessment not older than three years, though items classified as Commercial Off The Shelf are exempt provided this status is identified during the bidding process.

DLA Maritime - Puget Sound

POSTED

about 22 hours ago

DEADLINE

in about 18 hours

HVAC - Water Treatment

Solicitation # W56ZTN-26-B-A004

Solicitation W56ZTN-26-B-A004 is a total small business set-aside for HVAC water treatment services at Aberdeen Proving Ground, Maryland. The government is seeking a single award, Indefinite Delivery Indefinite Quantity (IDIQ) contract on a firm-fixed price basis. The scope of work involves providing chemical supply and maintenance services for government-owned boilers and cooling towers across 80 buildings. The contract spans a five-year period of performance from November 17, 2026, to November 16, 2027, with subsequent years and a final six-month option extending to March 16, 2032. The procurement utilizes a two-step sealed bidding process under FAR Subpart 14.5, evaluated as Lowest Price Technically Acceptable. In Step One, offerors must submit a technical proposal by September 11, 2026, which must not contain any pricing. Technical acceptability requires the contractor to have at least ten years of experience servicing boiler and cooling water systems, an ISO 9001:2008 certified chemical supplier, and personnel with ASSE12080 Legionella Water Safety and Management Specialist Certification. Only technically acceptable offerors will be invited to Step Two, where sealed price bids must be submitted as hard copies by September 23, 2026. Key performance requirements include weekly testing and reporting of cooling tower water and maintaining specific pH and nitrite levels for closed loop systems. The contractor is also required to utilize a Maryland-certified or ISO/IEC 17025 accredited laboratory for chemical and metallographic analysis. All bids must be submitted through the System for Award Management (SAM) and invoicing will be processed via the Wide Area WorkFlow (WAWF) system.

W6QK Acc-Apg Director

POSTED

about 22 hours ago

DEADLINE

FCI Three Rivers - Cooling-Tower and Closed-Loop Water Treatment Services

Solicitation # 15B51627Q00000002

The Federal Bureau of Prisons is conducting market research for an anticipated firm-fixed-price service contract at the Federal Correctional Institution Three Rivers in Texas. The requirement involves comprehensive water-treatment services for cooling-tower condensers and closed-loop water systems to control scale, corrosion, fouling, and biological growth. The scope includes twice-monthly cooling-tower servicing, monthly closed-loop system maintenance, chemical furnishing, laboratory analysis, and annual inspections. The government is seeking a contract structure consisting of a base year and four one-year option periods. Interested businesses under NAICS code 325998 must provide detailed company information, technical qualifications, and their ability to meet specific response times, including a 24-hour window for routine calls and an eight-hour window for critical emergencies. This is a sources sought notice for planning purposes and not a formal solicitation; therefore, no price quotes should be submitted. Responses, including a completed Market Research Questionnaire and an optional capability statement, must be submitted by September 10, 2026.

Fci Three Rivers

POSTED

about 22 hours ago

DEADLINE

The Family of Hand Held Signals

Solicitation # W519TC-23-R-0080

The Army Contracting Command - Rock Island is soliciting proposals under W519TC-23-R-0080 for the production of a Family of Hand Held Signals, specifically including M125A1, M158, and M159 Star Clusters and M126A1, M127A1, and M195 Star Parachutes. This requirement is a 100% Total Women-Owned Small Business set-aside under NAICS code 325998. The resulting award will be a five-year Indefinite Delivery Indefinite Quantity contract utilizing a combination of Firm Fixed Price for First Article Tests and Fixed Price with Economic Price Adjustment for production. The contract includes a guaranteed minimum purchase of 1,500,000 dollars, with production capacities reaching up to 8,333 units per month for various signal configurations. The acquisition follows Best Value tradeoff procedures, where Technical Capability and Past Performance serve as pass/fail gates. Technical capability must be rated as Acceptable, and Past Performance must be rated at least as Satisfactory to be considered for award. Due to the nature of the materials, the contract is classified as Sensitive Ammunition/Explosives, requiring strict adherence to DoD physical security standards for contractor-owned, contractor-operated facilities and the implementation of an Operations Security plan. Additionally, the contractor must manage Government Furnished Material, specifically M548 Metal Ammo Cans, and comply with strict Technical Data Package distribution restrictions under the Arms Export Control Act. Deliveries are F.O.B. Origin to Rock Island, Illinois, with a requirement for First Article Testing for each of the six signal configurations. The contractor is required to use the Wide Area WorkFlow system for invoicing and must provide a Quality Program Plan and Critical Characteristics Control Plan within specified timeframes after award. Proposals must be submitted electronically, with a final response deadline of September 22, 2026.

POSTED

about 22 hours ago

DEADLINE

FINGERPRINT BRUSH, MFR.: ZEPHYR

Solicitation # 231794

General Services

POSTED

DEADLINE

Solicitation # SPE8E6-26-T-4432

This contract, identified as SPE8E6-26-T-4432, is a solicitation from the Department of Defense for the procurement of 37 units of NSN 7690015428297, provided by ENPAC LLC under part number LABC. The delivery is required within 12 days after receipt of order, with a need ship date of August 17, 2026, and an original required delivery date of November 30, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The items are subject to strict quality and packaging standards, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. A critical requirement is the shelf-life specification RS001 for a Type I item, which mandates a non-extendable shelf life of 24 months. Additionally, the contract incorporates DLA master lists for technical and quality requirements and specifies the removal of government identification from any non-accepted supplies.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-26-T-4416

This contract, identified as SPE8E6-26-T-4416, is a solicitation from the Defense Logistics Agency for the procurement of two units of an identification marker, part number 87365025, with NSN 7690015493547. The item is classified as a Type I product with a non-extendable shelf life of 24 months. Delivery is required within five days after order, with the shipping and delivery destination specified as Fort Buchanan. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, and incorporates technical and quality requirements from the DLA Master List. Terms include FOB Origin shipping with inspection and acceptance occurring at the destination. The original required delivery date is set for September 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

FLUX, SOLDERING

Solicitation # SPE8E6-26-T-4419

This contract is for the procurement of Silver Solder RMA Paste, identified by NSN 3439013737966 and part number ASTM B32. The requirement consists of two line items totaling 6 units of issue (BT), with delivery required within 5 days after order. The materiel must be delivered FOB Destination to locations in Ohio and Saudi Arabia, with a required shelf-life of 85 percent remaining upon receipt. Compliance requires strict adherence to DLA packaging and marking standards, including MIL-STD-129 and ASTM-D3951-15, with unit containers consisting of glass or plastic jars. Because the item is classified as hazardous material, bidders must submit Safety Data Sheets and Hazardous Communication Standard labels to the contracting officer prior to award. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplies.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ACTUATOR, ELECTRO-MECHA

Solicitation # SPE7MC-26-T-248D

This contract, identified as SPE7MC-26-T-248D, is a solicitation by the Defense Logistics Agency for one electro-mechanical linear actuator with a worm gear assembly. The required item is associated with NSN 4810-01-539-4781 and corresponds to part numbers from Curtiss-Wright Flow Control Corporation and Emerson Automation Solutions. The delivery is required within 20 days after receipt of the order, with a final required delivery date of September 4, 2026. The shipment is destined for the USS ST LOUIS LCS 19 via vessel shipment and must be delivered FOB destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. The contract also incorporates technical and quality requirements RA001 and mandates the removal of government identification from any non-accepted supplies per RQ011.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

VALVE, PNEUMATIC TIRE

Solicitation # SPE7L7-26-T-5080

This contract is for the procurement of four pneumatic tire valves, identified by NSN 2640008572891 and part numbers VS-740-1-GOVT or 717-7. The valves must be size TR-717-02, feature an off-center position, and utilize a screw-in tube application method. A critical environmental requirement prohibits the use of Class I ozone depleting chemicals in the delivered items. The order is issued by the Defense Logistics Agency with a delivery requirement of 20 days after order. Shipping is FOB Origin and destined for the Parts-Attach General Depot in Tainan City, Taiwan. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, as well as DLA packaging requirements for procurement.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

DUCT ADAPTER KIT, AIR C

Solicitation # SPE8E8-26-T-5476

This contract, identified as SPE8E8-26-T-5476, is issued by the Defense Logistics Agency for the procurement of seven air conditioner duct adapter kits. The items are identified by NSN 4130-01-565-5614 and part number 5-199-00-000-024 from Fluid Handling LLC. Delivery is required within 167 days, with a required delivery date of February 10, 2027, and a need ship date of March 1, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Norfolk, Virginia. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional components as defined by NAVSEA. Inspection and acceptance will take place at the destination. The contract also incorporates technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-26-T-2718

This contract is for the procurement of four quarts of polyurethane coating under solicitation SPE8ES-26-T-2718 for the Defense Logistics Agency. The item is subject to Qualified Products List requirements, meaning the manufacturer must be QPL approved at the time of award. It is classified as a Type I item with a non-extendable shelf life of 12 months and must adhere to technical specifications MIL-PRF-85285F. Suppliers are required to comply with strict hazardous material guidelines, including the submission of Safety Data Sheets and Hazard Communication Standard labels per 29 C.F.R. 1910.1200. Delivery is set for 20 days after order, with shipping and marking following MIL-STD-129 and RP001 packaging requirements. The product is to be delivered FOB destination to the Marine Aviation Logistics Squadron 26 in Jacksonville, North Carolina.

Paint and Coating Manufacturing

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5085

This contract is a solicitation by the Defense Logistics Agency for the procurement of one power supply unit, identified by NSN 6130-01-687-9026 and part number 1600902-1 from Thales Defense & Security Inc. The delivery is required within 20 days after the order, with a final required delivery date of August 25, 2026. The item is to be delivered FOB Origin to the 0325 CS BN CO A Maintenance facility at Schofield Barracks, Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E4-26-Q-0397

This contract is for the procurement of 30 feet of structural steel angle measuring 4 by 4 inches with a thickness of 0.312 inches. The material must be supplied in whole foot lengths between 30 and 40 feet and must adhere to MIL-S-22698 and ABS Rule Part 2, including the AB identification marking. A critical requirement is that all material must have an ABS Surveyor's endorsement on the certificates to be accepted. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for the award. Comprehensive documentation is required, including a Certificate of Quality Compliance and specific continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Packaging and marking must comply with MIL-STD-129 and ASTM A700, with delivery expected within 30 days after the order.

Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5104

This contract is for the procurement of one lithium ion storage battery, part number FZ-VZSU84A2U manufactured by Panasonic Corp, under solicitation SPE7L7-26-T-5104. The item is identified by NSN 6140661643980 and is designated as a Type I Code Q item with a non-extendable shelf life of 36 months. Delivery is required within 20 days after order, with the final destination being the USS North Dakota SSN 784. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331. Additionally, the contract includes restrictions on the use of mercury, except where functionally required for batteries, and requires compliance with hazardous communication standards and covered defense information protocols.

Battery Manufacturing

POSTED

about 17 hours ago

DEADLINE

FILTER ASSEMBLY, WAT

Solicitation # SPE8E8-26-T-5527

This contract, solicitation number SPE8E8-26-T-5527, is issued by the Defense Logistics Agency for the procurement of Filter Assemblies, WAT, under National Stock Number 4610-01-414-2298. The requirement consists of multiple line items, each for a quantity of one each, intended for delivery to various naval vessels, including the USS Mustin, USS Carney, USS Benfold, USS John Paul Jones, USS Lassen, USS Paul Hamilton, and USS Spruance. All items are subject to a 20-day delivery requirement with an original required delivery date of August 17, 2026. The contract specifies destination-based inspection and acceptance, with shipping instructions requiring the fastest traceable means and explicitly prohibiting the use of parcel post for several shipments. Compliance with rigorous technical and security standards is mandatory, including a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and adherence to covered defense information protocols. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, with strict requirements for critical, major, and minor attributes. Additionally, the contract mandates strict environmental controls, prohibiting the intentional addition of mercury or mercury-containing compounds to any hardware. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, respectively, ensuring all supplies meet DLA packaging requirements for procurement.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

PLATE, INFORMATION

Solicitation # SPE8E6-26-T-4508

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of five information plates, identified by NSN 9905015484197 and part number 69823-001 from Control Products Corporation. The agreement specifies a delivery timeframe of 10 days after order, with a required delivery date of August 13, 2026. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, which is the Aviation Maintenance Center at Fort Rucker, Alabama. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as palletization requirements per RP001. It also incorporates guidelines for the removal of government identification from non-accepted supplies and notes that covered defense information potentially applies. All shipments must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.

Other Services Related to Advertising

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5101

This contract is for the procurement of two purge adapters, identified as gun part items with unique requirements under NSN 1005001396181. The items must be manufactured using a metal casting process, requiring specific tooling. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and the use of Class I ozone depleting chemicals is strictly prohibited. Product inspection will be conducted by the Quality Assurance Representative at the actual manufacturer's facility, and Product Verification Testing may be invoked prior to the acceptance of shipments. The delivery is set for FOB Origin with a required delivery date of August 17, 2026, and a delivery window of five days. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. The items are to be shipped via the fastest traceable means to Fort Campbell, Kentucky. Item Unique Identification is not required for this specific order.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4498

This contract, identified as SPE8E6-26-T-4498, is a solicitation by the Defense Logistics Agency for the procurement of one decal, part number 7679002988 and NSN 7690014772365. The item is classified as a Type I product with a non-extendable shelf life of 24 months. Delivery is required within five days of order, with the shipment destined for the Tennessee Army National Guard in Knoxville, Tennessee. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. It specifies that the item must be shipped via the fastest traceable means, explicitly prohibiting the use of parcel post. The contract also incorporates technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE3SE-26-Q-0457

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE3SE-26-Q-0457 for the procurement of two units of a non-NSN item identified by part number 7310GM5022323. This federal requirement is tracked under purchase request 7018102192. The solicitation was posted on September 2, 2026, with a response deadline set for September 10, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 17 hours ago

DEADLINE