Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Advanced Manufacturing Process R&D

Active

International

Response Deadline11/27/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Advanced Manufacturing Process R&D, focuses on the research and development of In-Orbit Manufacturing processes for prime contractors working on UK Space Agency projects. The scope of work includes material science research and process development for technologies such as chemical synthesis and microgravity 3D printing. To achieve these goals, the contractor will utilize specialized feedstock and simulation equipment to validate technologies up to Technology Readiness Level 4 or 5. Managed by the Department for Science, Innovation & Technology, the contract requires the delivery of a validated manufacturing process supported by comprehensive performance evidence. Interested parties should note that the response deadline is November 27, 2026, and the project falls under NAICS code 541715.

General Info

Agency

Department for Science, Innovation & Technology

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

Place of Performance

GBR

Set-Aside

NONE

Documents

This scope was carved out of UKSAC26_0057.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

In-Orbit Manufacturing (IOM) Maturation Research & Development Projects

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 31

subcontract

Response DeadlineNov 27

Submission deadline

Response Deadline

11/27/2026, 01:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment for Science, Innovation & Technology

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment for Science, Innovation & Technology

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Researches and develops In-Orbit Manufacturing processes, such as microgravity 3D printing or chemical synthesis, for prime contractors on UK Space Agency projects. Performs process development, material science research, and microgravity validation using simulation equipment and specialized feedstock. Validates technology to TRL 4/5. Delivers a validated IOM process with performance evidence.

Similar Contracts

Same NAICS industry code

Glovebox Demonstration ProgramThe Glovebox Demonstration Program is a forecast opportunity issued by the National Nuclear Security Administration under the Department of Energy. This project falls under NAICS code 541715 and is designated as a small business set-aside. The performance of the contract is expected to take place in the District of Columbia. The current incumbent contractor for this program is Merrick-SMSI Joint Venture LLP. Interested parties can coordinate with Chelsea Murphy, the Small Business Program Manager, regarding this upcoming requirement.

National Nuclear Security Administration

POSTED

about 4 hours ago

DEADLINE

Management and Operation of the Naval Nuclear Laboratory and Naval Nuclear Propulsion Program SupportThe Department of Energy, through the Naval Reactors Laboratory Field Office, is forecasting a contract for the management and operation of the Naval Nuclear Laboratory and the support of the Naval Nuclear Propulsion Program. This effort, categorized under NAICS code 541715, will be performed in Pennsylvania and is currently held by the incumbent contractor, Fluor Marine Propulsion, LLC. The procurement is listed as a forecast with a posted date of November 1, 2026. Interested parties may coordinate with the Small Business Program Manager, Mark Ziegler, regarding this opportunity.

Naval Reactors Laboratory Field Office

POSTED

about 4 hours ago

DEADLINE

Technical Research, Engineering, and Development Services (TREDS) II supporting the Department of Energy (DOE) National Nuclear Security Administration (NNSA) - Nevada Field Office (NFO)The Technical Research, Engineering, and Development Services (TREDS) II contract supports the Department of Energy National Nuclear Security Administration within the Nevada Field Office. This forecast identifies a requirement for specialized technical and engineering services to be performed in Nevada, falling under NAICS code 541715. The current incumbent for these services is the Nevada System of Higher Education. Interested parties may coordinate with the Small Business Program Manager, Chelsea Murphy, regarding this upcoming opportunity.

National Nuclear Security Administration

POSTED

about 4 hours ago

DEADLINE

RPOD Guidance, Navigation, and Control (GNC) SpecialistThis subcontract for an RPOD Guidance, Navigation, and Control Specialist supports the Department for Science, Innovation & Technology by providing technical analysis and conceptual design for Rendezvous, Proximity Operations, and Docking maneuvers. The scope of work involves developing mission concepts for safe RPOD with cooperative spacecraft, analyzing docking mechanisms, and assessing approach and departure trajectories. These tasks are performed for prime contractors as part of UK Space Agency feasibility studies. The specialist is required to utilize orbital mechanics simulation software, specifically STK and GMAT, to deliver comprehensive technical analysis reports and GNC concept designs. Interested parties must respond by November 27, 2026, regarding this opportunity which falls under NAICS code 541715.

Department for Science, Innovation & Technology

POSTED

DEADLINE

FY26 Fall Opportunity

Solicitation # 1538

ConnectWerx, acting as a Partnership Intermediary for the U.S. Department of Energy, is offering the FY26 Small Business Innovation Research and Small Business Technology Transfer Phase I funding opportunity. The program intends to distribute up to 50 million dollars across approximately 160 awards to energy innovators. Individual Small Business Concerns may request up to 300,000 dollars, or 306,500 dollars if Technical and Business Assistance is included. These are fixed-price, fast-track awards that combine Phase I and Phase II, with Phase II funding contingent upon the successful completion of Phase I milestones and a go/no-go decision. The application process begins with a mandatory initial pitch submitted through the Acquisition Management Portal by December 16 at 2 PM ET. Only applicants with successful pitches will be invited to submit a full application. Evaluation is based on technical promise, commercialization potential, and alignment with DOE mission priorities. Eligible companies may submit up to three pitches. Selected awardees will enter into a funding agreement with the DOE and ConnectWerx, though selection does not guarantee funding until project milestones are negotiated.

Department Of Energy

POSTED

DEADLINE

in about 2 months

Specialist Taxa Surveyor (Invertebrates and Vascular Plants)This subcontract opportunity for a Specialist Taxa Surveyor involves supporting prime contractors on Natural England projects through the collation and analysis of species records. The selected provider will be responsible for identifying rare, threatened, or locally significant vascular plants and invertebrates, as well as determining characteristic OMH communities. Technical requirements include performing invertebrate assemblage quality assessments using taxonomic identification keys and the Pantheon tool, necessitating deep expertise in UK taxonomy. The primary deliverables for this engagement are detailed species and community analysis reports. Interested parties should note that the response deadline is November 23, 2026, with the project falling under NAICS code 541715.

Natural England

POSTED

DEADLINE

Autonomous Flight Control & Navigation SystemsThis subcontract with the Naval Air Warfare Center Air Division focuses on the development and integration of autonomous flight control and navigation systems for prime contractors on TRUAS projects. The scope of work includes programming autonomous route following, obstacle avoidance, and Smart RTL backtracking. A critical component of the project is the integration of Alternative Position, Navigation, and Timing sensors to ensure operational capability within emission-control and GPS-denied environments. The technical execution involves the use of flight controllers and IMUs to deliver a complete suite of navigation hardware and integrated flight control software. Performance for this contract is based in Huntsville. Interested parties must respond by December 1, 2026, under NAICS code 541715.

Naval Air Warfare Center Air Division

POSTED

DEADLINE

System of systems Technology Integration Tool Chain for Heterogeneous Electronic Systems (STITCHES) Sources Sought

Solicitation # STITCHES_001

The Department of Defense, specifically the AFLCMC/HNJK, is conducting market research via a Sources Sought notice for the System of systems Technology Integration Tool Chain for Heterogeneous Electronic Systems (STITCHES). The government intends to award this effort as a sole source action to Lockheed Martin Corporation, citing over 13 years of specialized research and development and the need to avoid substantial duplication of costs and unacceptable delays to critical capabilities. The primary objective is to extend the functionality, performance, and operational maturity of the STITCHES toolchain to enable interoperability across disparate systems through the auto-generation of network glue code and the development of Minimum Viable Products for candidate mission capabilities. The scope of work includes upgrading the toolchain and Field Transform Graph infrastructure, maintaining the platform on Gemini Servers, and managing the associated Authority-to-Operate (ATO). Key deliverables include the delivery of all developed software as source and object code within 24 months, operational repositories provided within 30 days of community demonstrations, and comprehensive technical documentation. Performance will occur across various locations, including the contractor's facility, Hanscom AFB, and Langley AFB, with security requirements ranging from Unclassified to TS/SCI. Contractors must possess current TS/SCI facility and personnel clearances and demonstrate the ability to execute continuous cybersecurity operations throughout the development lifecycle.

FA2057 Aflcmc Hnjk

POSTED

DEADLINE

Missile Defense Agency - Nimble Options for Buying Layered Effects (NOBLE) Announcement

Solicitation # HQ0860-25-S-0001

The Missile Defense Agency Nimble Options for Buying Layered Effects (NOBLE) announcement, solicitation number HQ0860-25-S-0001, is an overarching acquisition strategy active from March 27, 2025, through March 27, 2030. This initiative consolidates multiple solicitation authorities to accelerate the development, prototyping, and deployment of innovative missile defense technologies. Key technical focus areas include kinetic and hypersonic defense solutions, space-based capabilities such as resilient satellite constellations and advanced sensors, and command, control, and battle management advancements leveraging artificial intelligence, quantum computing, and autonomous systems. This announcement serves as a framework rather than a direct solicitation; therefore, no white papers or proposals should be submitted to the announcement itself. Instead, the MDA will release individual solicitations under this umbrella, each specifying its own technical requirements, evaluation criteria, and submission deadlines. These may take the form of FAR-based procurement contracts or Other Transaction agreements. Interested parties must be registered in the System for Award Management and are encouraged to monitor the MDA Opportunity Marketplace and SAM.gov for specific opportunities, such as the Mobile Integrated Launch Capability, Low-Cost Kill Vehicle, and Shipborne Phased Array Instrumentation Radar. All communications must be unclassified and directed to [email hidden].

Missile Defense Agency (mda)

POSTED

DEADLINE

in over 3 years

Engineering Support for the Asymmetric Systems

Solicitation # N0017827R3106

The Naval Surface Warfare Center Dahlgren Division is seeking qualified personnel to provide comprehensive technical and engineering support for the integration of advanced automation capabilities into current and future naval weapon systems. This effort, identified by solicitation N0017827R3106, covers the entire acquisition lifecycle from initial material solution analysis through testing, evaluation, and safe fielding. The scope of work is highly multi-disciplinary, encompassing systems, software, mechanical, cyber, aerospace, and robotics engineering, as well as specialized support in intelligence, surveillance, and reconnaissance, cybersecurity, and rapid prototyping. Performance will occur primarily at the Dahlgren, Virginia facility and the contractor's own sites. The anticipated contract is a five-year effort consisting of a twelve-month base period and four one-year option periods. While initially described as a Cost-Plus-Fixed-Fee Level of Effort Task Order, the government is considering a hybrid structure utilizing both Firm-Fixed-Price and Cost-Plus-Fixed-Fee contract line items. Award will be based on best value, with evaluations focusing on technical capabilities, personnel qualifications and security clearances, and past performance as a prime contractor within the last five years. Administrative requirements include invoicing via Wide Area Workflow and financial reporting through the eCRAFT system, with strict adherence to DFARS 252.204-7012 cybersecurity standards.

POSTED

DEADLINE

Tactical Resupply Unmanned Aircraft System Increment II Cargo UAS Industry Demonstration

Solicitation # NAWCAD-SN-26-TRUASII

The Direct Reporting Portfolio Manager for Robotic and Autonomous Systems 4.0, Air Warfare Program Management Office, is seeking industry participants for the Tactical Resupply Unmanned Aircraft System (TRUAS) Increment II Cargo UAS industry demonstration. Scheduled for January 25 through February 5, 2027, in Huntsville, Alabama, this event aims to identify unmanned aircraft systems (UAS) and enabling technologies to support the Marine Corps Unmanned Logistics System – Air (ULS-A) mission for last-mile tactical distribution in expeditionary environments. The government is inviting applications from all qualified participants, including small businesses and non-traditional defense contractors, provided they are U.S. citizens or companies with U.S.-based offices. Participants must demonstrate a UAS with a maximum gross take-off weight of up to 350 lbs that can perform specific autonomous flight missions. These include a 40 nautical mile round trip with a 100 lb payload and a 10 nautical mile round trip with at least a 150 lb payload, both without refueling. Systems must maintain an airspeed of at least 50 knots, operate below 1,000 feet AGL, and launch and recover without mechanical assistance. Technical requirements include FIPS 140-3 Level 2 radio encryption, compliance with MIL-STD461G and MIL-STD464C, and the ability to operate in degraded environments using alternative positioning, navigation, and timing (PNT) solutions. Selection for the demonstration is based on a white paper and questionnaire evaluated against a specific rubric focusing on country of origin, weight, range, payload capacity, and unit cost. Successful performance during the demonstration may lead to the award of an Other Transaction (OT) prototype agreement under 10 U.S.C. section 4022, which could potentially result in a follow-on production contract without further competition. To be eligible for such an award, selectees must join the Naval Aviation Systems Consortium (NASC). Applications are due by November 30, 2026.

Naval Air Warfare Center Air Division

POSTED

DEADLINE

Building America Subject Matter Expert Technical Support

Solicitation # RFP-2026-10245()

The National Laboratory of the Rockies (NLR) is soliciting proposals under RFP-2026-10245 to engage technical subject matter experts (SMEs) in support of the Department of Energy's Building America program. The primary objective is to help industry stakeholders scale the production of high-quality, lower-cost buildings. The scope of work is divided into two main focus areas: new construction support, which emphasizes factory optimization, product design, materials innovation, and digital modeling, and envelope retrofits, which focuses on reducing utility costs by addressing moisture, humidity, and infiltration. SMEs will be responsible for technical assistance, field validation, data collection, and knowledge transfer through the creation of technical reports, case studies, and industry outreach materials. NLR intends to award up to ten Firm Fixed Price subcontracts using a Work Order process. Each agreement features a 12-month basic period with four 12-month options, totaling a potential five-year period of performance. Each subcontract has an anticipated annual funding level of approximately 100,000 dollars and a five-year ceiling of 500,000 dollars. Selection is based on a Best Value process, prioritizing qualitative merit over price, with evaluation criteria focusing on technical expertise, research and analysis capabilities, collaboration experience, and a history of knowledge transfer. Proposals must be submitted electronically and include a technical proposal limited to eight pages, a price proposal based on fully burdened labor rates, and required representations and certifications.

Llc - DOE Contractor Alliance For Energy Innovation

POSTED

DEADLINE

More opportunities from Department for Science, Innovation & Technology

Same awarding agency

Space Environment Testing & AnalysisThe Space Environment Testing and Analysis subcontract, issued by the Department for Science, Innovation and Technology, focuses on the validation testing and analysis of IOM payloads for prime contractors involved in UK Space Agency projects. The scope of work includes executing critical thermal vacuum, vibration, and electromagnetic interference testing utilizing specialized equipment such as vibration tables and vacuum chambers. These activities are designed to provide the necessary evidence to establish TRL 4/5 readiness. The selected provider will be responsible for delivering detailed analysis data and comprehensive test reports. This opportunity was posted on October 31, 2026, with a response deadline of November 27, 2026. The contract falls under NAICS code 541380, emphasizing the technical and scientific nature of the required space environment simulations.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Space-Grade Prototyping & FabricationThis subcontract, titled Space-Grade Prototyping and Fabrication, is issued by the Department for Science, Innovation and Technology to support UK Space Agency projects. The selected provider will be responsible for the supply and fabrication of physical prototypes for IOM payloads and hardware intended for prime contractors. The scope of work involves high-precision machining and additive manufacturing, specifically utilizing CNC and SLS/DMLS systems with space-qualified polymers and alloys to deliver hardware for testing. To ensure industry standards for aerospace quality, the contractor must hold either AS9100 or ISO 9001 certification. The opportunity was posted on October 31, 2026, with a response deadline set for November 27, 2026. The contract falls under NAICS code 332710, focusing on the specialized production of space-grade components.

POSTED

about 11 hours ago

DEADLINE

Space Payload Design & EngineeringThis subcontract, titled Space Payload Design and Engineering, involves providing proportionate design and engineering services for In-Orbit Manufacturing payloads supporting prime contractors on UK Space Agency projects. Managed by the Department for Science, Innovation and Technology, the scope of work includes mechanical design, CAD modeling, and both structural and thermal analysis tailored for space environments. The selected provider must utilize SolidWorks or CATIA and ensure all deliverables adhere to ECSS standards. Key outputs for the contract include the delivery of comprehensive engineering drawings and detailed design specifications for the IOM payload. The response deadline for this opportunity is November 27, 2026.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

In-Orbit Manufacturing (IOM) Maturation Research & Development Projects

Solicitation # UKSAC26_0057

The UK Space Agency, under the Department for Science, Innovation and Technology, is seeking proposals for approximately two In-Orbit Manufacturing (IOM) Maturation Research and Development Projects. With an estimated total value of 1.4 million GBP excluding VAT, this initiative aims to advance IOM processes and associated payloads to Technology Readiness Level 4/5 by the Final Review milestone. Selected projects will conduct design, prototyping, analysis, and testing to establish a credible roadmap for microgravity demonstrations by 2030, while strengthening the commercial case and providing evidence to inform the ISAM IOD Programme Business Case and future procurement decisions. The procurement is specifically designated as a Contracts for Innovation competition for research and development services, with a particular suitability for small and medium-sized enterprises. Proposals must be submitted in English via the Jaggaer eSourcing Portal by 13:00 UK time on 27 November 2026. Awards will be based on a 100 percent quality evaluation, weighted across proposed technology (20 percent), technical feasibility (20 percent), commercial and strategic potential (20 percent), project management (15 percent), benefit to the UK (15 percent), and value for money (10 percent). The estimated period of performance runs from 4 January 2027 to 15 June 2027 within the United Kingdom.

Space Research and Technology

POSTED

about 11 hours ago

DEADLINE

Space Program Management & Cost EstimatorThe Space Program Management and Cost Estimator subcontract, issued by the Department for Science, Innovation and Technology, focuses on providing strategic planning, cost modeling, and risk assessment for prime contractors involved in UK Space Agency mission feasibility studies. The selected provider will be responsible for identifying costs, risks, and dependencies for mission concepts, defining procurement decision points, and performing gap analyses to support Business Case evidence. Technical execution involves the use of cost estimation software and Monte Carlo simulations to ensure accuracy in financial forecasting. Key deliverables for this engagement include a comprehensive cost-benefit analysis, a detailed risk register, and a strategic roadmap. Interested parties must adhere to the response deadline of November 27, 2026. The contract falls under NAICS code 541611, emphasizing the requirement for professional administrative and management consulting services to ensure the viability and strategic alignment of space mission concepts.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Space Ground Segment & Operations ConsultantThe Space Ground Segment and Operations Consultant subcontract, issued by the Department for Science, Innovation and Technology, focuses on the analysis of ground-based infrastructure and operational procedures for prime contractors involved in UK Space Agency RPOD missions. The selected consultant will be responsible for evaluating ground-segment options, developing operational assessments for the command and control of servicer spacecraft, and determining essential communication dependencies and ground station requirements. Utilizing Mission Control System architecture tools, the consultant will deliver critical ground segment requirements and Concept of Operations. Interested parties must respond by November 27, 2026, for this specialized technical role categorized under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Spacecraft Life Extension Systems ArchitectThis subcontract opportunity with the Department for Science, Innovation & Technology seeks a Spacecraft Life Extension Systems Architect to develop conceptual designs for servicer and client spacecraft interfaces. The role focuses on supporting prime contractors for UK Space Agency life extension projects, specifically through the analysis of refuelling interfaces, the design of Attitude and Orbit Control System takeover concepts, and the creation of frameworks for in-orbit component replacement and repair. The successful candidate will utilize CAD software and expertise in fluid transfer systems to deliver comprehensive conceptual architecture designs. Interested parties must respond by November 27, 2026, for this project categorized under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Mission Feasibility Studies – Spacecraft Life Extension Service Demonstration

Solicitation # UKSAC26_0058

The Department for Science, Innovation & Technology, through the UK Space Agency, is conducting a Contracts for Innovation competition under solicitation UKSAC26_0058 to fund approximately three Phase 0/A mission feasibility studies. The objective is to explore credible options for a future in-orbit demonstration of a Rendezvous, Proximity Operations and Docking (RPOD)-enabled spacecraft Life Extension service. These studies will focus on developing mission concepts for safe and repeatable RPOD with cooperative client spacecraft to de-risk future services such as refuelling, AOCS takeover, relocation, repair, upgrade, or refurbishment. Key deliverables include the analysis of client and servicer options, operational assessments, and the identification of costs, risks, and dependencies to inform a future Business Case. This procurement is designated for Research and Development services and is categorized as an exempted contract under the Procurement Act 2023, with particular suitability for small and medium-sized enterprises. The total estimated value is 2,100,000 GBP excluding VAT, with an estimated performance period from January 4, 2027, to June 15, 2027. Awards will be based on an open procedure with a 100% quality weighting, evaluated across technical ideas, feasibility, project management, value for money, strategic potential, and benefit to the UK. Submissions must be made via the Jaggaer eSourcing Portal by November 27, 2026, with an estimated award decision date of December 22, 2026.

Space Research and Technology

POSTED

DEADLINE

Event Planner / Showcase CoordinatorThis subcontract opportunity with the Department for Science, Innovation & Technology seeks an Event Planner and Showcase Coordinator to organize stakeholder events for prime contractors involved in cyber innovation projects. The primary objective is to demonstrate partnership success through the coordination of logistics for small to medium enterprises and public sector participants, culminating in the management of one major Showcase Day. Responsibilities include overseeing venue coordination and audiovisual equipment to ensure the successful execution of the event. Qualified candidates must hold a professional event planning certification to be eligible for the role. The successful contractor will be responsible for delivering the completed Showcase Day along with all associated event reports. Interested parties must submit their responses by November 27, 2026, under NAICS code 561920.

Convention and Trade Show Organizers

POSTED

DEADLINE

Knowledge Architect / Technical Writer (Cyber Innovation)This subcontract opportunity with the Department for Science, Innovation & Technology seeks a Knowledge Architect or Technical Writer to document partnership outcomes for prime contractors on cyber innovation projects. The primary objective is to analyze results from five design partnerships to establish a repeatable adoption framework and a pattern library of approaches tailored for public-sector cyber innovation. The successful candidate must possess expertise in cyber-security architecture and be proficient in using technical documentation tools and knowledge management software. Key deliverables for the project include a disseminated Pattern Library and a comprehensive final program report. Interested parties must respond by November 27, 2026.

Marketing Consulting Services

POSTED

DEADLINE

Cyber Compliance & Procurement SpecialistThe Cyber Compliance and Procurement Specialist subcontract supports prime contractors on cyber innovation projects for the Department for Science, Innovation and Technology. The primary objective is to establish a compliance wrapper that ensures legal and secure commercial transitions, specifically by developing security and data protection frameworks and providing procurement guidance aligned with the Procurement Act 2023. The specialist will advise on lawful adoption routes to move projects from pro bono status to paid contracts, requiring deep expertise in GDPR and UK Government security standards. The contract deliverables include a comprehensive compliance wrapper and documented adoption routes. Interested parties must respond by November 27, 2026, for this opportunity posted on October 30, 2026. The engagement falls under NAICS code 541618 and is managed through the Department for Science, Innovation and Technology.

Other Management Consulting Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS