Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aerospace Actuator and Nozzle Hardware Installation

Active

Federal

Response Deadline09/03/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation and mechanical integration of precision aerospace components, specifically actuators, sync rings, and associated hardware for titanium alloy nozzle assemblies. This work requires high-accuracy fabrication and assembly techniques to meet the stringent performance and reliability standards of aerospace applications. All components must be integrated with strict adherence to engineering specifications to ensure functional compatibility and structural integrity under extreme operating conditions. This is a subcontract opportunity under the NAICS code 332994, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 4, 2026, with a firm response deadline of September 3, 2026, at 8:00 PM. The place of performance and specific location details are not provided, but the work is expected to support critical defense aerospace systems. Interested parties must submit proposals by the deadline to be considered, and no set-aside classifications are indicated, meaning the contract is open to all eligible subcontractors.

General Info

Install precision aerospace actuators and sync rings for titanium nozzles under DOD subcontract by September 3, 2026.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 08:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation and mechanical integration of precision aerospace components including actuators, sync rings, and hardware for titanium alloy nozzle assemblies.

Similar Contracts

Same NAICS industry code

Gear and Transmission Component SupplyThe contract pertains to the supply of precision-machined components including gears, shafts, bearings, and transmission sub-assemblies specifically designed for use within tractor drive units. These parts are critical to the mechanical functionality and performance of military-grade equipment, requiring high standards of engineering precision and material durability. The solicitation is issued as a subcontract under NAICS code 332994, indicating the focus is on other fabricated metal product manufacturing, with performance expected to occur in New Cumberland, Pennsylvania, at the designated zip code 17070-5002. The opportunity was posted on August 4, 2026, with a firm response deadline of August 7, 2026, leaving a narrow three-day window for potential suppliers to submit proposals. While no set-aside classification or agency-specific procurement restrictions are specified, the contract is managed by the Department of Defense through its Construction & Equipment Manufacture and Construction division. All submissions must be made through the DIBBS platform, with the official solicitation accessible via the provided UI link. Suppliers are expected to meet stringent quality and delivery criteria consistent with defense production requirements.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

Hose Assembly Supply and DeliveryThe contract entails the supply and delivery of four nonmetallic hose assemblies, identified by NSN 4720011546337, each equipped with permanent fittings that meet specified military and Defense Logistics Agency standards. These assemblies are intended for use within defense systems and must adhere to strict quality and performance criteria established by the Department of Defense. The contract is classified as a subcontract under NAICS code 332994, indicating specialized manufacturing activities not elsewhere classified, and was posted on August 4, 2026, with no set-aside provisions for small or disadvantaged businesses. Performance is expected to be carried out under the purview of the Defense Logistics Agency, though specific delivery locations and points of contact are not detailed. The award reference number SPE7M326V3919 is linked to the official DIBBS portal for tracking and administrative purposes.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

DOOR, ACCESS, WEAPON

Solicitation # SPE4A6-26-U-3305

This contract pertains to the procurement of a Door, Access, Weapon System identified by NSN 5342-01-106-6632, with a quantity of 64 units, under solicitation SPE4A6-26-U-3305. The requirement is set aside exclusively for small businesses, as defined under FAR 19.5, and falls under NAICS code 332994. Delivery is mandated within 116 days after order placement. Compliance with stringent technical and quality standards is required, incorporating specifications from the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. The item is subject to rigorous inspection and acceptance protocols at origin, governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes must be classified with specific verification levels or AQLs. Technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons or entities without prior authorization, and access is limited to contractors holding approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaires. Physical identification and marking of items must meet explicit CMMC Level 2 and RQ017 requirements, and all government identification must be removed from non-accepted supplies. Packaging must adhere to DLA procurement standards, and point of contact for inquiries is Heather Spadaro of the ASC Commodities Division, Department of Defense.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-609P

The contract pertains to the procurement of 50 pump handles identified by NSN 5342008679546 under solicitation SPE4A7-26-T-609P, with delivery required within 33 days of shipment. The order is split into three line items totaling 50 units—7 units for delivery to Tinker AFB, Oklahoma; 10 units to Hill AFB, Utah; and 33 units to Robins AFB, Georgia—each with a unit price of $1.00, resulting in a total contract value of $50.00. All items must be packaged in accordance with ASTM D3951, marked and labeled per MIL-STD-129, and palletized in compliance with DLA Packaging Requirements RP001, with the Unit of Issue as EA and Quantity per Unit Pack as 1. The delivery point is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The required delivery date for all items is October 5, 2026, though each line item has a separate need ship date between May and December 2026. Packaging and shipping instructions, including freight and parcel post addresses, are specified for each location, and all requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM standards where applicable. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Jamiah Sutton as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9282

The charging lever, identified by NSN 1005-01-657-2843, is a defense-related item subject to strict export controls under either ITAR or EAR, meaning any transfer of technical data associated with it—whether physical, electronic, or verbal to foreign persons regardless of location—requires prior authorization from the Department of State or Department of Commerce. Distribution is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. Only two units are being procured under Purchase Request 1000239117 with delivery due 139 days after order. The solicitation, numbered SPE7LX-26-U-9282, was posted on August 4, 2026, with responses due by August 19, 2026, and is set aside exclusively for small businesses under NAICS code 332994. The procurement is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

COUPLING, CLAMP, GROOVED

Solicitation # SPE4A6-26-T-11SY

The contract is for the procurement of seven grooved couplings and clamps, identified by NSN 5342010178437, with a unit price of $7.00 per item, resulting in a total contract value of $49.00. Delivery is required within 171 days from the contract date, with shipment terms FOB origin and no variance allowed in quantity; the full order of seven units must be delivered without deviation. Inspection and acceptance both occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization must follow DLA’s RP001 packaging guidelines. Mercury and mercury compounds are explicitly prohibited in all preservation, packaging, and marking processes. The delivery destination is DLA Distribution at the New Cumberland facility in Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery deadline of July 5, 2027. Transportation instructions are governed by DLAD procedural notes C19 and C20, and the solicitation was issued under contract number SPE4A6-26-T-11SY with a response deadline of August 12, 2026. The procurement falls under NAICS code 332994 and is managed by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-147C

The contract pertains to the procurement of three units of a GATE, GUIDE component identified by NSN 1005-01-324-3094 under solicitation SPE7L3-26-T-147C, with a delivery deadline of 318 days from award. The requirement is governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications referenced by R or I numbers, and compliance with tailored higher-level quality standards for both manufacturers and non-manufacturers. Demilitarization protocols for Category I munitions items apply, and cybersecurity requirements mandate CMMC Level 2 self-assessment or certification by an accredited third-party organization. Export control restrictions are in effect due to the presence of technical data subject to ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce, and restricting access to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and official approval. Packaging must adhere to DLA standards, and inspection and acceptance occur at origin. Item Unique Identification is waived per customer request, but physical marking and removal of government identification from non-accepted supplies are required. Configuration changes require formal engineering change proposals or variance requests. The place of performance is New Cumberland, PA, with Katelyn Young of the Department of Defense serving as the primary point of contact.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

FAIRLEAD, TUBULAR

Solicitation # SPE4A7-26-T-610P

The contract pertains to the procurement of two tubular fairleads, identified by NSN 5342-01-220-7044, under solicitation number SPE4A7-26-T-610P, with a delivery requirement of 171 days after order. All supplies must comply with the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered standards referenced in the official DLA repository. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes are treated as major. Commercial off-the-shelf items are accepted provided the agency has adequate commercial catalog data. The item is to be delivered to New Cumberland, Pennsylvania, with the Department of Defense as the procuring agency under NAICS code 332994. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and all applicable revisions to technical and quality standards are controlled by the solicitation issue date unless amended. Primary point of contact is Jamiah Sutton at the Defense Logistics Agency.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

HOUSING, FEEDER-DELI

Solicitation # SPE7LX-26-U-8874

This contract under solicitation SPE7LX-26-U-8874 is an indefinite-delivery contract issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate for the procurement of Housing, Feeder-Deli items identified by NSN 1005-01-477-6396. The estimated quantity is 13 units, though this is non-binding and subject to actual delivery order placement within a contract ceiling of $350,000. Delivery is required within 94 days of award, with FOB Origin terms applying, and acceptance occurs at the destination. Packaging and marking must strictly adhere to MIL-STD-129 and DLA’s RP001 packaging requirements, with palletization following DLA standards; while ASTM D3951 is referenced, it is subordinate to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications. Mercury or mercury-containing compounds are prohibited from direct contact with supplied hardware except for specific functional exemptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract incorporates a comprehensive set of federal and defense acquisition regulations, including mandatory cybersecurity requirements under CMMC Level 2 self-assessment and the NIST SP 800-171 DOD Assessment Requirements, with stringent safeguarding of covered defense information as defined in FAR 52.227-1 and DFARS 252.204-7012. Contractors must comply with trafficking in persons, employment eligibility verification, sustainable product, and equal opportunity clauses, with deviations noted for several clauses. All offerors must provide a UEI and CAGE code and represent their small business status, including socioeconomic categories such as WOSB, EDWOSB, SDVOSB, or HUBZone, and disclose any involvement with covered defense telecommunications equipment or services. Invoicing must be conducted electronically through WAWF using permitted document types, and the contract prohibits surplus supplies. The award will be made under simplified acquisition procedures using Standard Form 18 submitted via the DIBBS portal by the August 4, 2026 deadline, with no paper submissions accepted.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7L7-26-Q-2111

The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.

DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-610W

This contract is a total small business set-aside under solicitation SPE4A7-26-T-610W for the procurement of 30 units of part number 575089 identified by NSN 5342012342741, designated as a critical application item and supplied by R F PRODUCTS, INC. (CAGE 58022). The delivery is required within 171 days of award with FOB origin terms, inspection and acceptance occurring at destination. Packaging and preservation must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including packaging code U, preservation method 10, and unit container D3, with all marking adhering to MIL-STD-129 and no special markings required. Palletization must also follow DLA standards, and the parcel post and freight shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional use of mercury or mercury-containing compounds in any hardware, supply, or packaging materials, except for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemically specified reagents under NAVSEA 5100-003D, which must include secondary containment and be shockproof. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances expected unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. All technical and quality requirements referenced via R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The required delivery date is August 7, 2027, with a need ship date of January 31, 2027, and the solicitation closed on August 12, 2026, with Michael Johnson as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

RACK, STORAGE, SMALL

Solicitation # SPE7L3-26-T-146L

The contract is for the procurement of four units of a small storage rack identified by NSN 1095-01-710-8626 and part number UWRM7U, with a unit price of $4.00 and a total value of $16.00. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and container codes. Marking must adhere to MIL-STD-129 with no special markings, and palletization must follow DLA packaging requirements. The goods are to be shipped via traceable means—parcel post is prohibited—to the designated government facility at Fort Carson, Colorado. The contractor is required to retain complete supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016 and must remove all government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L3-26-T-146L, issued on August 4, 2026, with a response deadline of August 17, 2026. The primary point of contact is Katelyn Young of the Department of Defense.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Small Business Subcontracting Plan DevelopmentThe contract requires the development and submission of a Small Business Subcontracting Plan to assist a prime contractor in meeting its federal subcontracting goals as outlined under FAR 52.219-9, ensuring compliance with federal small business participation requirements. The plan must be structured to support meaningful opportunities for small businesses across relevant industries, with a focus on the NAICS code 541611, which pertains to Management Consulting Services. The submission deadline is September 3, 2026, and the effort is being managed by the Department of Defense through the Defense Logistics Agency Aviation in Oklahoma City. There is no set-aside designation specified for this contract, and the place of performance details are unspecified, indicating that the plan may be developed remotely or tailored to support prime contractor operations across multiple locations. The work must be completed and delivered by the stated deadline to enable the prime contractor to fulfill its regulatory obligations under federal contracting rules. While no point of contact is listed, the proposal must align precisely with the requirements of FAR 52.219-9 to be considered acceptable and actionable.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Packaging and Containerization of Aerospace HardwareThe contract entails the military-compliant packaging and containerization of aerospace hardware using skids and inserts, strictly adhering to ASTM-D-6199 and A-A-55057 standards to ensure durability, protection, and compliance with defense logistics requirements. All packaging solutions must meet rigorous environmental and handling specifications for secure transport and long-term storage of sensitive aerospace components under military-grade conditions. The work is subcontracted under a procurement initiated by the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, with performance expected to align with designated defense supply chain protocols. The solicitation was posted on August 4, 2026, with a response deadline of September 3, 2026, at 8:00 PM Eastern Time, allowing potential vendors a minimum of four weeks to prepare and submit proposals. The North American Industry Classification System code 561910 applies, indicating the focus on support activities for transportation and packaging services. While no set-aside provisions are specified, the contract is structured as a subcontract and requires full compliance with federal defense packaging mandates without exception. All submissions must demonstrate technical expertise in military packaging systems and proven capability to execute under the referenced standards.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

First Article Testing and Quality DocumentationThe contract requires the execution and documentation of First Article Testing (FAT) to ensure compliance with government quality standards, specifically involving the submission of Inspection and Measurement Systems (IMS), Product Orientation Specifications (POS), and comprehensive test reports for official approval. All documentation must be meticulously prepared and submitted within the specified timeline to meet federal requirements, with emphasis on accuracy, traceability, and adherence to technical specifications established for defense-related components. The work is classified as a subcontract under NAICS code 541380 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with a firm response deadline of September 3, 2026. Participation is open to qualified entities capable of delivering certified FAT outcomes and quality assurance documentation without set-aside restrictions, and performance is tied to ensuring the readiness and acceptance of products within the defense supply chain.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Precision Machining of Titanium Alloy ComponentsThe contract calls for precision CNC machining, milling, and finishing of high-strength titanium alloy components designed for aerospace nozzle systems, requiring advanced manufacturing capabilities to meet stringent aerospace integrity and performance standards. Work must adhere to tight tolerances and material specifications native to titanium alloys used in high-temperature, high-stress environments, with all processes ensuring dimensional accuracy, surface finish, and structural integrity critical to mission-critical propulsion applications. The work is classified as a subcontract under NAICS code 332813, indicating specialized metal forging and stamping activities with a focus on custom machining. The opportunity is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with response submissions due by September 3, 2026. There is no set-asides designated for small businesses or other categories, and the place of performance is not specified in detail, implying flexibility in location provided the deliverables meet contractual and technical requirements. Interested parties must possess the technical expertise, equipment, and quality control systems necessary to handle aerospace-grade titanium under controlled manufacturing conditions, with all completed parts expected to be fully traceable and compliant with defense industry specifications.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 22 hours ago

DEADLINE

Aerospace Component Supply Chain ManagementThe contract entails end-to-end supply chain management for aerospace components specifically tailored to meet military compliance requirements, with a strong emphasis on sourcing long-lead and diminishing manufacturing source items that are critical to defense systems. The scope includes full traceability throughout the supply chain, secure logistics coordination, and comprehensive documentation to ensure adherence to stringent defense standards. Services must support uninterrupted availability of parts vital to military aircraft and equipment, requiring proven experience in navigating complex procurement challenges associated with obsolescence and restricted sourcing. The solicitation is classified as a subcontract under NAICS code 423830 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Bidders must submit responses by the deadline of August 12, 2026, at 4:59 a.m. Eastern Time, with the opportunity posted on August 4, 2026. While the place of performance and point of contact details are not specified, compliance with federal defense supply protocols and the ability to deliver verified, auditable supply chains are fundamental to qualification.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Source Qualification and Technical Data SupportThe contract is for engineering support focused on preparing and submitting Source Acceptance Review (SAR) packages, managing nonrecurring engineering (NRE) activities, and ensuring full compliance with military qualification requirements and engineering data lists. This support is critical to maintaining the integrity and traceability of technical documentation for defense systems, ensuring all engineering deliverables meet stringent military standards. The work involves close coordination across technical teams to validate data accuracy, update documentation in line with evolving requirements, and facilitate timely approvals for source qualification. The contract is classified as a subcontract under NAICS code 541330, indicating it relates to engineering services. It was posted on August 4, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Performance location details are not specified, but the work is directly tied to defense aviation systems and procurement compliance. The solicitation number is not provided, and no set-aside type is indicated, suggesting it is open to qualified subcontractors without specific socioeconomic preferences. All activities must align with DoD data control and technical documentation protocols to support operational readiness and supply chain certification.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

Hydraulic Accumulator Manufacturing and SupplyThe contract involves the full-cycle manufacturing, testing, packaging, and delivery of 33 hydraulic accumulators identified by part number M5498-1 and NSN 1650-00-640-8485, with all components sourced and assembled in strict compliance with applicable military specifications. The work encompasses every stage from raw material procurement and fabrication through rigorous quality assurance testing and final packaging for secure shipment, ensuring the end products meet the performance, durability, and safety standards required for defense applications. The opportunity is structured as a subcontract with a NAICS code of 332994, indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing, and is issued under the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, providing a tight nine-day window for interested parties to submit proposals. The place of performance and contact details are not specified, but the requirement demands adherence to federal defense logistics protocols and full traceability of materials and processes.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 22 hours ago

DEADLINE

AXIL PISTON PUMP_End_Item_B-52_NSN_4320-01-564-1570HS_PN_51197

Solicitation # FD20302700085

The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of Axial Piston Pumps with part number 51197 and NSN 4320-01-564-1570HS, intended for use on the B-52 platform. This effort, identified by Notice ID FD20302700085 and classified under NAICS code 336413 with a size standard of 1,250 employees, is not a solicitation and no contract will be awarded based on responses. The government seeks input from all types of businesses including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone companies, and women-owned small businesses to assess market capability and determine if the requirement can be competed or set aside for small business participation. The estimated requirement is for 33 units, and potential suppliers must demonstrate the ability to handle full-cycle manufacturing including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of diminishing manufacturing sources and material shortages. Responses are to be submitted via the “Add Me to Interested Vendors” button by the deadline of August 12, 2026, at 4:59 a.m. Central Standard Time, and all communications must be directed to the workflow email 423scms.guea.workflow@us.af.mil. The government will use the collected information solely to inform future acquisition strategy, including possible segmentation by airframe, and will not evaluate or reward submissions. There are no funds allocated for this market research effort, and no obligation is created for the government by publishing this notice. Potential vendors are advised that nonrecurring engineering costs may be incurred to qualify as an approved source, and unit pricing will be determined at the time of any future contract award. The place of performance for any resulting contract will be Tinker AFB, Oklahoma.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

SERVOCYLINDER_End_Item_F-15_NSN_1650003135013_PN_3151-015

Solicitation # FD20302700163

The U.S. Air Force, through the 423rd SCMS Requirements Office at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Servocylinder with NSN 1650-00-313-5013 and Part Number 3151-015, intended for F-15 platforms. This effort is a Sources Sought Synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on responses. The requirement is for approximately 31 units with a potential range of 8 to 47, and interested vendors must demonstrate capability in full manufacturing, including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources and long-lead time parts. Nonrecurring engineering costs associated with qualification as an approved source may also be required. The North American Industry Classification System code is 336413 with a size standard of 1,250 employees, and the government is actively seeking participation from all business categories including Small Businesses, Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses. Responses must be submitted through the designated workflow email, and all actions must occur within the specified timeline under Central Standard Time.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

HOUSING/INDICATOR_End_Item_B-52_NSN_6680011726958RK_PN_10006-1002-01

Solicitation # FD20302602505

The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential vendors capable of manufacturing spares for the Housing/Indicator part with NSN 6680-01-172-6958RK and P/N 10006-1002-01, intended for use on the B-52 platform. This effort, identified by Notice ID FD20302602505, is a Sources Sought synopsis under FAR Part 10 and is not a solicitation or a commitment to award a contract; no funds are available at this time. The Government is seeking information from all types of businesses including large firms, small businesses, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses to assess competition and determine if the requirement can be set aside for small business participation. The estimated requirement is for 60 units, and potential suppliers must demonstrate the ability to perform full-scale new manufacture including component procurement, inspection, testing, packaging, shipping, and management of supply chain challenges such as diminishing manufacturing sources. The contract activity falls under the NAICS code 336413 with a size standard of 1,250 employees, and performance would be centered at Tinker AFB, Oklahoma. Interested parties must register via the “Add Me to Interested Vendors” function to be considered; responses will not be evaluated as bids and no formal solicitation currently exists. The government will use the collected information to shape future acquisition strategies, potentially breaking the requirement by airframe or other criteria, and will consider nonrecurring engineering costs associated with qualifying as a new source. All communications and responses must be sent to 422.scms.afmc.rfi@us.af.mil, and responses are due by September 4, 2026, in Central Standard Time. The Office of the Department of the Air Force, under the Air Force Sustainment Center, is leading this effort to ensure a robust and capable industrial base for critical spare parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Hydraulic Accumulator_End_Item_KC-135_NSN_1650-00-640-8485_PN_M5498-1

Solicitation # FD20302700112

The U.S. Air Force, through the 423rd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Hydraulic Accumulator with NSN 1650-00-640-8485 and Part Number M5498-1, intended for use on the KC-135 platform. This effort is a Sources Sought synopsis under FAR Part 10, not a solicitation or procurement action, and no contract award is anticipated based on responses. The Government seeks to determine if the requirement for 33 units can be competitively sourced and whether it is suitable for a Small Business Set-aside, and is interested in submissions from all types of businesses including Small, Small Disadvantaged, 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned Small Businesses. Respondents must be capable of managing full production cycles including component procurement, inspection, testing, packaging, shipping, and addressing supply chain challenges such as diminishing manufacturing sources and long-lead parts acquisition, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. The procurement is classified under Federal Stock Class 1650 and NAICS Code 336413, which carries a size standard of 1,250 employees. The place of performance is Tinker AFB, Oklahoma, and all communications must be directed to the designated workflow email, 423scms.guea.workflow@us.af.mil. Interested parties must actively select the "ADD ME TO INTERESTED VENDORS" button to participate; responses outside this mechanism will not be acknowledged. The market research window opened on August 4, 2026, and closes on August 12, 2026, with all timestamps in Central Standard Time. No funding is currently available for this research phase, and the resulting data will solely inform the Air Force’s future acquisition strategy, including possible separation of requirements by airframe. Any solicitations or contracts for this item will be issued separately in the future.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

NSN: 2840-01-374-0735NZ, P/N: 4080513, NOUN: SUPPORT, AUGMENTER PR FD2030-25-00159

Solicitation # SPRTA126R0386

The contract solicitation SPRTA1-26-R-0386 seeks Augmenter Support components identified by NSN 2840-01-374-0735NZ and Part Number 4080513, intended for use on F-100 engines. The item is a nozzle assembly fabricated from Titanium Alloy that provides structural support for actuators, sync rings, and related hardware. The procurement includes 32 units under Line Item OOO1 with a baseline quantity of 32, minimum of 9, median of 34, and maximum of 51 units, alongside first article submissions: two production units, one expended unit, one test plan, and one test report. Only qualified suppliers—Barnes Group, RTX Corp, and Jedco Inc.—are eligible to respond, and all offers must comply with qualification standards per FAR clauses 52.209-1 or 52.209-2. The acquisition is subject to export control regulations and may be impacted by Free Trade Agreements, though commercial item policies under FAR Part 12 are not being applied. Electronic submission is required, and all inquiries must be directed to Alex Varughese via email; no phone requests are accepted. An independent Ombudsman is available to address contractor concerns during the proposal phase, maintaining strict confidentiality without influencing source selection. The solicitation will be accessible via SAM.gov with a response deadline of August 4, 2026, and awards will be contingent on meeting all technical, qualification, and compliance requirements at the time of award.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE