Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aerospace Surface Treatment and Coating

Active

Response Deadline10/26/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Aerospace Surface Treatment and Coating subcontract involves providing specialized surface treatments and anti-corrosion coatings for aircraft floor components under NAVAIR projects. The selected provider will utilize chemical baths and anodizing tanks to apply protective coatings and finishes in strict accordance with TDP Version 001 and must ensure full compliance with FAR 52.223-3 regarding hazardous material identification. This opportunity is managed by the Navsup Weapon Systems Support within the Department of the Navy, with performance taking place in Philadelphia. The project falls under NAICS code 332813, and interested parties must submit their responses by the deadline of October 26, 2026.

General Info

NAVAIR subcontract for aircraft floor surface treatments and coatings in Philadelphia by 10/26/2026.

Agency

Department Of The Navy → Navsup Weapon Systems Support

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of NO0383-26-Q-LB13.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLOOR,AIRCRAFT — 1560015533032 — N0038326QLB13

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized surface treatments and anti-corrosion coating for prime contractors on NAVAIR aircraft component projects. Applies protective coatings, anodizing, or finishes as specified in TDP Version 001 using chemical baths and anodizing tanks. Ensures compliance with FAR 52.223-3 for hazardous material identification. Delivers finished, coated aircraft floor components.

Similar Contracts

Same NAICS industry code

Phosphate Coating Services for Mortar Mount LegsThis subcontract opportunity is for the provision of specialized phosphate coating services for mortar mount legs to support prime contractors delivering to the Department of Defense Land Supply Chain. The selected provider will utilize industrial plating tanks and chemical processing equipment to apply coatings in accordance with military specifications to ensure essential corrosion and wear protection for the metal surfaces. The project is designated as a Total Small Business Set-Aside under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by October 5, 2026, to be considered for this requirement.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Cadmium Plating for Carbon Steel HardwareThis subcontract involves providing cadmium plating services for carbon steel hardware to support prime contractors on DLA Land and Maritime fluid handling projects. The scope of work includes the surface preparation of carbon steel adapters and the application of cadmium plating using industrial tanks and chemical processing equipment to ensure all components meet government corrosion resistance specifications. The project is managed by the Department of Defense Fluid Handling Division and will be performed at Tinker AFB. Interested parties must respond by October 5, 2026, for this requirement categorized under NAICS code 332813.

FLUID HANDLING DIVISION

POSTED

DEADLINE

NADCAP Certified Phosphate Coating ServicesThis subcontract for NADCAP Certified Phosphate Coating Services supports the Department of Defense Fluid Handling Division by providing specialized corrosion resistance for metal components used in DLA Land and Maritime projects. The contractor is responsible for applying phosphate coatings using industrial plating tanks and chemical processing equipment to meet strict military-grade standards. A critical requirement for this engagement is the maintenance of NADCAP Certification for all phosphate procedures to ensure quality and compliance. The work will be performed in Texarkana, Texas, under NAICS code 332813. Interested parties must respond by October 5, 2026, to the solicitation posted on September 24, 2026. The final deliverable consists of phosphate-coated metal components that are fully prepared for final assembly.

FLUID HANDLING DIVISION

POSTED

DEADLINE

NADCAP Special Process Services (Heat Treat/Plating/NDT)This subcontract opportunity with the Department of Defense involves performing specialized aerospace processes for aircraft panel projects under the ASC Supplier OE and AF Division. The selected provider will execute heat treating, chemical processing, or non-destructive testing using industrial ovens, plating baths, or X-ray and ultrasonic equipment as specified by technical drawings. A critical requirement for this contract is maintaining active NADCAP approval for the specific processes performed, and all delivered components must include a certification of compliance. The project is designated as a Total Small Business Set-Aside under NAICS code 332813 and will be performed at Tinker AFB. Interested parties must submit their responses by October 2, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Coating and Surface TreatmentThis subcontract for Precision Coating and Surface Treatment involves providing specialized surface treatments for critical gun parts, specifically pawl components, for prime contractors under DLA supply contracts. The work is performed for the Department of Defense Land Supply Chain and requires the application of coatings and finishes according to ASTM-B633 and SAE-AMS-QQ-P-416 standards using industrial plating tanks to ensure military-grade durability and corrosion resistance. The performance of this contract takes place in New Cumberland, Pennsylvania, under NAICS code 332813. To be eligible, providers must maintain ISO 9001 certification and be registered with ITAR. The solicitation was posted on September 24, 2026, with a response deadline of October 5, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Finishing and Coating for Snap HooksThis subcontract involves providing post-casting finishing services for prime contractors on DLA Land and Maritime fluid handling projects. The scope of work includes removing casting flash and burrs and applying protective coatings, such as powder coating or zinc plating, utilizing tumbling machines and plating tanks to deliver finished snap hooks. The project is managed by the Department of Defense Fluid Handling Division and will be performed in San Diego, California. All operations must strictly comply with FAR 52.223-23 and FAR 52.223-3 regulations. The opportunity is categorized under NAICS code 332813.

FLUID HANDLING DIVISION

POSTED

DEADLINE

CARC and High-Temperature Coating Application

LAND SUPPLY CHAIN

POSTED

DEADLINE

Specialized Coating and Finishing ServicesThis subcontract for Specialized Coating and Finishing Services supports the Department of Defense Fluid Handling Division by providing industrial coating and finishing for prime contractors. The scope of work includes surface preparation through degreasing and sandblasting, followed by the application of powder and industrial coatings using specialized spray booths and ovens to ensure all finished racks meet strict military durability standards. All operations must strictly comply with the Hazard Communication Standard under 29 CFR 1910.1200 regarding the handling of hazardous materials. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 5, 2026, following the posting date of September 24, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Surface Treatment and Finishing for Arming BracketsThis subcontract for the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency, involves providing specialized surface treatment and finishing for arming solenoid brackets. The contractor is responsible for applying protective coatings, anodizing, or cadmium plating using industrial plating tanks and chemical baths to ensure all components meet strict MIL-SPEC environmental and durability standards. The final deliverables must be finished brackets ready for assembly and inspection. The project is categorized under NAICS code 332813 and will be performed at Hill AFB in Utah. Interested parties must respond by October 5, 2026, following the posting date of September 24, 2026. This effort supports prime contractors on DLA supply contracts to ensure critical hardware meets military specifications.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Specialized Coating for Critical Gun PartsThis subcontract, issued by the Department of Defense Land Supply Chain, involves the application of specialized protective or functional coatings to cylinder caps for critical gun part projects. The work requires the use of industrial coating equipment for anodizing, plating, or chemical film application in accordance with the technical data package for NSN 1095009553203. The project is set aside for Women-Owned Small Businesses and will be performed at Hill AFB. The contractor is responsible for delivering 769 coated cylinder caps and one assembled coating exhibit for First Article Testing. Strict adherence to security and regulatory standards is mandatory, specifically requiring CMMC Level 2 and DFARS 252.204-7012 compliance. The response deadline for this opportunity is October 5, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Finishing and Coating for Critical ShaftsThis subcontract, titled Precision Finishing and Coating for Critical Shafts, involves providing specialized surface and heat treatments for prime contractors under DLA supply contracts. The scope of work includes applying protective coatings and surface finishes according to C5B configurations, as well as performing heat treatments to ensure critical application components meet specific hardness and strength requirements using precision plating and furnace equipment. The project is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with performance taking place at Hill AFB. The contract falls under NAICS code 332813 and requires the delivery of finished and coated shafts. The response deadline for this opportunity is October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-4461

Solicitation SPE8E5-26-T-4461 is a Request for Quotations issued by the Defense Logistics Agency Troop Support for the procurement of one box of cleaning solvent, GE, identified by NSN 7930-01-367-0995. The item is classified as a Type I Code H product with a non-extendable shelf life of 12 months. Delivery is required within five days after receipt of the order, with an original required delivery date of September 28, 2026. The shipment is destined for the 309 AMARG MXDSPS at Davis Monthan AFB, Arizona, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Because the item is hazardous, the contractor must comply with IP025 and the Hazard Communication Standard for labeling and shipping. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must comply with the Buy American Act, the Berry Amendment, and various DFARS regulations regarding domestic sourcing and cybersecurity. Quotes must be submitted via the DIBBS system by October 5, 2026.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support

Same awarding agency

DLR Labeling and Military PackagingThis subcontract for DLR Labeling and Military Packaging, issued by the Department of the Navy's Navsup Weapon Systems Support, involves providing specialized packaging and labeling services for Depot Level Repairable items on DLA Distribution projects. The contractor is responsible for applying DLR labels to units, intermediate containers, and shipping containers using industrial bar code printers and MIL-STD packaging materials. All work must strictly comply with Section D Packaging and Markings and specific DLR labeling requirements to ensure units are fully prepared for shipment. The project is based in Mechanicsburg, Pennsylvania, under NAICS code 483111. Interested parties must submit their responses by the deadline of October 26, 2026.

Deep Sea Freight Transportation

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Seals, Gaskets, and Interface ComponentsThis subcontract under the Department of the Navy's Navsup Weapon Systems Support involves the supply of airtight seals, gaskets, and flexible tubing and hoses for breathing apparatus used by prime contractors on DLA Distribution projects. The scope of work includes the precision die-cutting and molding of industrial or medical-grade polymers and elastomers, such as silicone and Viton, to ensure hermetic seals. All materials must adhere to non-toxic and non-reactive standards and be accompanied by Material Safety Data Sheets. The contract requires the delivery of components in kits per unit and is performed in Mechanicsburg, Pennsylvania. Interested parties must respond by October 26, 2026, under NAICS code 339991.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Pressure Regulators and Valve AssembliesThis subcontract with the Department of the Navy's Navsup Weapon Systems Support involves the fabrication and supply of critical air-flow control valves and pressure regulators for breathing apparatus used in DLA Distribution projects. The contractor is responsible for manufacturing and testing these components to ensure precise oxygen and air delivery and leak-proof performance in accordance with Cage Code 03WY2 designs. The process requires the use of precision valves, diaphragms, and pressure-testing rigs, and the contractor must maintain valid pressure vessel certifications to deliver certified regulator and valve assemblies. The project is categorized under NAICS code 332911 and will be performed in Mechanicsburg, Pennsylvania. The solicitation was posted on September 25, 2026, with a response deadline of October 26, 2026.

Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Breathing Apparatus Housing and Structural ComponentsThis subcontract through the Department of the Navy and Navsup Weapon Systems Support involves the manufacture of outer shells, housings, and structural frames for breathing apparatus used in DLA Distribution projects. The contractor is responsible for producing components that ensure airtight seals using precision machining, molding, or casting in accordance with Cage Code 03WY2 design specifications. Production requires the use of high-impact polymers, aerospace-grade aluminum, or specialized alloys utilizing injection molding or CNC machining. The project is based in Mechanicsburg and requires strict adherence to ISO 9001 or AS9100 quality standards as well as compliance with the Buy American Act. Under NAICS code 332710, the selected provider will deliver finished structural housings and frames. The response deadline for this opportunity is October 26, 2026.

POSTED

about 23 hours ago

DEADLINE

in about 1 month

BREATHING APPARATUS — 4240016505015 — N0010426RLB98

Solicitation # N0010426RLB98

Solicitation N0010426RLB98 is a fixed-price contract issued by the Navsup Weapon Systems Support in Mechanicsburg, Pennsylvania, for the manufacture of breathing apparatus units (NIIN 016505015). The procurement requires the items to be produced according to the design represented by Cage Code 03WY2, reference number 940300, using Technical Data Package version 002. A total of 6,077 units are required, with 3,039 units shipping to DLA Distribution in New Cumberland, Pennsylvania, and 3,038 units shipping to DLA Distribution in Tracy, California. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will include risk assessments via the Supplier Performance Risk System regarding item, price, and supplier risks. The contractor is responsible for all inspection and acceptance at the origin and must maintain inspection records for 365 days after final delivery. Strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging is required, with specific mandates for Item Unique Identification (IUID) and DLR labeling where applicable. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and receiving reports. The contract incorporates several critical regulatory clauses, including DFARS 252.204-7012 for cybersecurity and safeguarding covered defense information, as well as Buy American and Balance of Payments Program requirements. Offerors must be authorized distributors of the original manufacturer and provide proof of authorization on company letterhead to be considered for award.

Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Supplier of Pneumatic Test Set (NSN 4920-00-543-7930)This subcontract, issued by the Department of the Navy's Navsup Weapon Systems Support, requires the procurement and delivery of one specialized pneumatic test set, identified as NSN 4920-00-543-7930 and Part Number 1C3568G01. The equipment is intended for prime contractors on US Navy procurement projects and must be delivered to a designated government consignment address in Philadelphia. The supplier must adhere to strict quality and regulatory standards, including ISO 9001 for quality control and MIL-STD-2073 for packaging. Additionally, the contract mandates full compliance with the Buy American and Trade Agreements Act. The response deadline for this opportunity is October 26, 2026.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Aerospace Grade Material Supply (Alloys/Composites)This subcontract with the Department of the Navy, specifically Navsup Weapon Systems Support, involves the supply of certified aerospace-grade raw materials, including metals, alloys, and composites, for NAVAIR aircraft component projects. All materials must adhere to the specifications outlined in TDP Version 001 and be delivered to the fabrication site in Philadelphia. To ensure quality assurance, the provider is required to furnish mill test reports and material certifications. Compliance with DFARS 252.225-7000 is mandatory, requiring that all end products be sourced from the United States, a qualifying country, or a designated country. The opportunity was posted on September 24, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332431.

Metal Can Manufacturing

POSTED

DEADLINE

in about 1 month

Aircraft Floor Panel FabricationThis subcontract with the Department of the Navy's Navsup Weapon Systems Support involves the precision manufacture of aircraft floor panels for NAVAIR aircraft component projects. The contractor is responsible for fabricating components according to TDP Version 001, applying markings per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. The project requires the use of aerospace-grade tooling and machinery to deliver finished panels under NIIN 015533032. The performance of this contract will take place in Philadelphia and requires strict adherence to the Buy American Act and DFARS 252.240-93 regarding the safeguarding of contractor information systems. Interested parties must respond by October 26, 2026. The work falls under NAICS code 336413 for other aircraft parts and accessory manufacturing.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Ground Lift Maintenance Platform SupplierThis subcontract with the Department of the Navy, specifically Navsup Weapon Systems Support, requires the supply of one ground lift maintenance platform for prime contractors. The supplier must manufacture or source the equipment according to NSN 1730-00-657-1177 and specific part numbers 31-000-101 or 3401350-175. Performance takes place in Philadelphia, and the contract falls under NAICS code 336413. The supplier is responsible for adhering to MIL-STD-2073 packaging standards and certifying the country of origin per DFARS 252.225-7036. Additionally, a Unique Item Identifier must be provided for any units valued over 5,000 dollars. The final deliverable is one completed maintenance platform.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Precision Parts Supply for Torque Limiter AssemblyThis subcontract with the Department of the Navy's Navsup Weapon Systems Support involves the manufacture and supply of replacement parts, fasteners, and sub-components for the Torque Limiter Assembly, part number 1680-01-575-7642. The contractor is required to produce these components to exact naval specifications and provide comprehensive written reports that include dimensional data, material details, and certifications for finish and process. The project is based in Philadelphia and requires strict adherence to the Buy American and Balance of Payments Program. All delivered parts must be certified to ensure compliance with the specified technical and regulatory standards. The response deadline for this opportunity is October 26, 2026.

POSTED

DEADLINE

in about 1 month

Torque Limiter Assembly Overhaul and TestingThis subcontract involves the overhaul and testing of Torque Limiter Assembly part number 1680-01-575-7642 for the Department of the Navy's Navsup Weapon Systems Support in Philadelphia. The scope of work includes the teardown, evaluation, repair, upgrade, and functional testing of units to ensure they meet original specifications and are returned to Ready For Issue condition. The project is categorized under NAICS code 811210 and will be performed in Philadelphia, Pennsylvania. Interested parties must respond by October 26, 2026, to provide a fully overhauled, tested, and certified assembly.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Heat Exchanger Replacement Parts/MaterialsThis subcontract through Navsup Weapon Systems Support for the Department of the Navy involves the procurement of replacement tubes, gaskets, seals, and plates required for the repair of Fluid Heat Exchangers. The selected provider must supply components that meet original equipment manufacturer or government technical drawings using high grade alloys, while providing necessary certificates of conformance. The contractor is responsible for ensuring all materials are TAA compliant and meet domestic origin requirements, with final delivery of parts to the repair facility located in Philadelphia. The opportunity is categorized under NAICS code 339999 and requires a response by October 26, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS