Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Afocal Objective Lens Modules

Active
SPRBL1-26-R-A001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

DLA Land at Aberdeen, under the Department of Defense, anticipates issuing a Request for Quote under solicitation number SPRBL1-26-R-A001 for 80 Objective Lens Modules with NSN 6650-01-676-1468 and part number 6439506-1 to support organic repair operations at Tobyhanna Army Depot in Pennsylvania. The contract will be awarded under NAICS code 333310, with delivery required FOB Destination and inspection and acceptance to occur at origin, though accelerated delivery without additional cost to the government is encouraged. The sole designated delivery point for the duration of the contract is Tobyhanna, PA, with the specific schedule to be detailed in the final solicitation. This procurement is not set aside for small businesses and is being managed by the DLA Weapons Support Aberdeen office located in Aberdeen Proving Ground, Maryland. Primary point of contact is Shawn Lyttle, reachable via email or phone, with Kyle White as the secondary contact for further inquiries. The presolicitation notice was posted on July 22, 2026, and all proposals must be submitted through the designated SAM.gov portal.

General Info

DLA Aberdeen seeks 80 lens modules for Tobyhanna Depot, FOB destination, no small business set-aside, SAM.gov submission.

Agency

Department Of Defense → DLA Land At AberdeenView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

Tobyhanna, PA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land At Aberdeen
Contacts2 people available
OfficeABER PROV GRD, MD, 21005, USA
Organization / Agency
Department Of Defense → DLA Land At Aberdeen
View Agency Profile
Office AddressABER PROV GRD, MD, 21005, USA
Contacts
Shawn Lyttle
contact@example.gov
+1 (555) 000-0000
Kyle White
contact@example.gov

Full Description

Show more

In accordance with RFO FAR 5.1, this is a presolicitation notice ("synopsis") that DLA Weapons Support Aberdeen anticipates issuing a Request for Quote (RFQ) for the procurement of the below listed NSNs in support of the Objective Lens Modules required to support organic repair of Afocal assemblies at Tobyhanna Army Depot.


NSN: 6650-01-676-1468


Nomenclature: Objective Lens Module


PN: 6439506-1


QTY: 80


Ship To: The expected ship-to location for the duration of the resulting contract will be Tobyhanna, PA (W25G1W). This requirement will be issued as FOB Destination with Inspection and Acceptance at origin. The Government required delivery schedule will be located in the Deliveries or Performance section of the solicitation. Accelerated delivery at no additional cost to the Government is accepted and encouraged.


There is no Set Aside for small business for this solicitation



Similar Contracts

Same NAICS industry code

NAICS: 333310
New
Federal
Naloxone Vending Machines Delivery and Set UpA blanket purchase agreement is being established for the manufacturing and delivery of Naloxone Vending Machines to Tribal entities, with full ownership and operation retained by those Tribes. The contractor will supply the machines, handle initial stocking, deliver them to Tribal locations, and provide training on their use, while the Indian Health Service Nashville Area will cover all costs related to manufacturing, vinyl wrapping, delivery, and training. Each machine must include an integrated data reporting system capable of real-time tracking of inventory levels and consumption to ensure accountability and operational efficiency. Restocking of Naloxone within the machines is the responsibility of the Tribal entities after initial provision. The solicitation, numbered 75H71526Q00029, is set to close on August 17, 2026, and is a total small business set-aside under NAICS code 333310, encouraging participation from small businesses. The contract is managed by the Nashville Area Indian Health Service, a division of the Department of Health and Human Services, with primary contact information available through Andrew Rhoades at the agency’s address in Nashville, Tennessee. The machines will be deployed to Tribal entities across the country, supporting their efforts to combat opioid overdoses through immediate, community-based access to life-saving medication.
Nashville Area Indian Health Svc

POSTED

about 12 hours ago

DEADLINE

in 24 days
View Details
NAICS: 333310
New
Federal
42--AUTO INFLATOR,KITThe U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 7,600 units of the AUTO INFLATOR, KIT with NSN 4220014709906 under solicitation SPE8E526Q0356. The procurement is a total small business set-aside under NAICS code 333310, restricting participation to qualified small businesses as defined by the SBA. The approved source for this item is CMV-1008, and all quotes must be submitted electronically by the deadline of July 31, 2026. Delivery is required to DLA Dist San Joaquin with a 150-day delivery timeline following award. The solicitation is issued as an RFQ with no hard copies available, and no specifications, plans, or drawings are provided. All responsible small business sources may respond, and submissions must be received on time to be considered. The point of contact for inquiries is listed via email, with additional details available through the official SAM.gov portal using the solicitation number.
DLA Troop Support

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
Federal
BNOE Clinical Driving SimulatorThe Department of Veterans Affairs through its 256-NETWORK Contract Office 16 is seeking a contractor to provide the BNOE Clinical Driving Simulator in full alignment with the salient characteristics outlined in the Statement of Work. The solicitation, identified by number 36C25626Q1096, is exclusively set aside for small businesses under the SBA Total Small Business Set-Aside provisions, targeting vendors classified under NAICS code 333310 for manufacturing other transportation equipment. Responses are due by August 4, 2026, and the contract will be performed primarily in Houston, Texas, with delivery and operational support expected at the designated location. The primary point of contact for inquiries is Oney Kelly, reachable via phone or email, and all submissions must adhere to the requirements specified in the combined solicitation document posted on SAM.gov on July 24, 2026.
256-NETWORK Contract Office 16 (36C256)

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
Modular Assembly Manufacturing and IntegrationThe contract calls for the full lifecycle manufacturing, assembly, inspection, and testing of a modular unit identified by NSN 4620014120049, adhering strictly to Defense Logistics Agency standards. This includes comprehensive origin inspection to verify material sourcing and full compliance with military packaging specifications to ensure readiness for deployment under operational conditions. All work must meet the stringent quality and documentation requirements mandated by the Department of Defense, with emphasis on traceability, durability, and functional performance throughout the unit’s lifecycle. This is a subcontract opportunity under NAICS code 333310, with a response deadline of August 3, 2026, and a posting date of July 23, 2026. The performance location and point of contact details are not specified, but the work is tied to DLA’s supply chain infrastructure and will support defense logistics operations. Interested parties must submit proposals through the DIBBS platform via the provided UI link, and all deliverables must align with federal defense procurement protocols, including inspection protocols and packaging integrity standards required for military environments.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
RETAINER ASSEMBLY, QUICThe contract pertains to the procurement of a right-hand retainer assembly, specifically designed for use on the Oshkosh Wrecker Model M984E1, with a total quantity of 39 units. The item is identified by NSN 2590-01-222-5436 and is subject to a delivery requirement of 112 days after award. The solicitation number is SPE7L3-26-T-127A, issued by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance to occur in New Cumberland, Pennsylvania. Full and open competition is permitted, and technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The contracting entity must comply with stringent cybersecurity standards, including CMMC Level 2 certification as a certified third-party assessment organization, and packaging must adhere to DLA procurement requirements. Configuration changes require formal engineering change proposals and variance requests per established protocols. The item incorporates export-controlled technical data governed by ITAR or EAR, restricting access and dissemination to only those contractors approved under the US/Canada Joint Certification Program who have completed mandatory DOD export control training and been formally authorized by DLA. Government identification must be removed from any non-accepted supplies, and inspection and acceptance are to occur at the manufacturer’s origin. The point of contact for inquiries is Matthew Curry, with a response deadline of August 3, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
MAGNIFIERThe contract involves the procurement of 74 units of a folding 14x pocket magnifier under solicitation SPE7L7-26-T-4447, with a required delivery date of December 8, 2026, and a need ship date of January 19, 2027, allowing for a 168-day delivery window. The item is classified as a commercial off-the-shelf product with adequate catalog data available for evaluation, and deliveries are to be made FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is each (EA) at a unit price of $74.00 for a total of $5,476.00. The contract includes strict cybersecurity and quality controls, mandating CMMC Level 2 compliance and incorporation of technical requirements from the DLA Master List. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional uses in batteries, lighting, sensors, or weapon systems, and any portable devices containing mercury must have shockproof construction and a secondary containment barrier in accordance with NAVSEA 5100-003D. Sampling requirements follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes must be verified at specified levels with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor defects respectively. Delivery is addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
STAND, MAINTENANCE, AUTOThe contract is for the procurement of ten stand, maintenance, automotive engine units with a 6000 lb capacity, featuring 360-degree rotation and casters, identified by NSN 4910-00-808-3372. Each unit must be delivered within 168 days after award, accompanied by one manufacturer’s commercial manual covering operation, service, maintenance, and repair instructions. The contract falls under a total small business set-aside and is governed by DLA packaging and technical quality requirements referenced through R numbers in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The procurement is managed under solicitation SPE7L3-26-T-125K, issued on July 23, 2026, with responses due by August 3, 2026, and the North American Industry Classification System code is 333310. Delivery is to be performed at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the primary point of contact is Matthew Curry of the Department of Defense’s Land Supplier Operations Vehicle Support office. The contractor is required to remove any government identification from non-accepted supplies, per RQ011 specifications.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
LENS, OPTICAL INSTRUThe contract covers the procurement of 10 units of LENS, OPTICAL INSTRU with NSN 6650-01-718-1820 under solicitation SPE7L7-26-T-4444, issued by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery is required within 168 days of contract award with a firm delivery date of January 19, 2027, and must be shipped FOB origin with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, materials, and unit container codes, and must be marked in accordance with MIL-STD-129 with no special marking required. Palletization must adhere to DLA packaging requirements, and the item is designated as a critical application item with applicable defense information controls. Inspection and acceptance occur at the destination, and all quality verification follows zero-defect sampling protocols under MIL-STD-1916 or equivalent, with critical, major, and minor attributes assigned strict verification levels and AQLs. The technical and quality requirements referenced are incorporated via the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation date for simplified acquisitions. The NAICS code 333310 applies, and the unit of issue is each, consistent with DoD standards. The contract specifies delivery to the DLA distribution center with detailed parcel post and freight shipping addresses. The supplier must meet stringent quality assurance protocols, including adherence to sampling plans and attribute classifications unless otherwise directed, and must ensure all items exclude government identification if rejected. The contract was posted July 23, 2026, with responses due by August 3, 2026, and the primary point of contact is James Wolfingbarger of DLA. The item is sourced from W S Darley & Co and Avon Protection Systems Incorporated under their respective part numbers.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
GUN, AIR BLOWThe contract specifies the procurement of 211 units of an air blow gun identified by NSN 4940-00-223-8973 and part number P/N 120 from Milton Industries, Inc. and P/N 53025 from Bowes Mfg Inc, classified as a commercial item with critical application status. Delivery is required within 168 days of contract award to Tinker AFB, Oklahoma, with FOB origin terms and zero variance allowed in quantity. The items must be packaged in compliance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required, and palletization must adhere to DLA packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, packing, and marking unless explicitly exempted for functional uses such as batteries, sensors, or instruments, and even then must meet additional containment standards as defined by NAVSEA 5100-003D. Packaging and preservation methods include preservation type 10, dry storage, and D3 unit containers with intermediate packaging coded E6. The contract references DLA’s Master List of Technical and Quality Requirements, which governs all technical and quality specifications, with compliance tied to the revision in effect on the solicitation issue date. The delivery deadline is set for January 19, 2027, with an original required delivery date of November 24, 2026. Transportation and shipping are subject to DLAD procedural notes C19 and C20, and the point of contact for inquiries is Rory O’Reilly with the Fluid Handling Division, Department of Defense.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
STEM, FLUID VALVEThe contract specifies the procurement of a STEM FLUID VALVE with part numbers 83309-46 and 8555-038-065 manufactured by VELAN VALVE UNITED STATES OPCO, INC., under NSN 4820-01-461-5785. A total of eight units are required, to be delivered FOB ORIGIN within 84 days from the solicitation date, with a need ship date of September 17, 2024, and an original required delivery date of August 22, 2024. Delivery is to be made to the Defense Logistics Agency San Joaquin Distribution Center in Tracy, CA, with inspection and acceptance occurring at the destination. The valve must be constructed of steel and strictly free from intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E using dry preservation (Method 31), no preservation material, dry climate conditions, and unit container type E6, with intermediate container DO and packaging code U. Marking shall adhere to MIL-STD-129 without special marking codes, and palletization must follow DLA’s RP001 packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List referenced via R and I numbers, and all hazardous materials must be declared with accompanying Safety Data Sheets in compliance with 29 CFR 1910.1200. Contractual clauses include mandatory FAR and DFARS provisions related to employment equity, human trafficking, eligibility verification, sustainable products, cybersecurity safeguarding, prohibition on hexavalent chromium and covered defense telecommunications equipment, whistleblower rights, and NIST SP 800-171 compliance, all subject to deviation 2026-00038. Invoicing is to be conducted electronically through WAWF, and the contractor must maintain UEI and CAGE codes, affirming small business status if applicable. The solicitation number is SPE7MC-26-T-130Z, issued by DLA San Joaquin, with no set-aside type specified
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
DIBBS
TOOL, DISMANTELING CThe contract pertains to the supply of a dismounting tool designated as TOOL, DISMANTELING C, specifically for use with the Colt Industries-S.E.M.T PIELSTICK 16 cylinder diesel engine model PC2.5V installed on LSD41 through LSD44 landing craft vessels. The item is identified by NSN 4910-01-180-2650 and has a purchase request number of 7017602437, with a requirement for two units to be delivered within 168 days from the contract award. Delivery is FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative methods, wrapping materials, and unit container specifications, with marking adhering to MIL-STD-129 and no special marking required. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with the same address used for freight shipping. The tool is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited in its construction or contact, except for functional uses in batteries, instruments, sensors, weapon systems, or reagents specified by NAVSEA; portable devices containing mercury must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, and all packaging and handling must meet DLA procurement standards. The solicitation was issued under contract number SPE7L5-26-T-4571 with a response deadline of August 3, 2026, and originates from the Department of Defense’s Land Supplier Operations Engines office.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
INSERT TOOL, RECEPTACLEThe contract specifies the supply of 10 units of an insert tool assembly with a receptacle O-ring, identified by part number BA38897-02 and NSN 4921-01-382-9786, under solicitation SPE7M4-26-T-281J. The requirement is for delivery within 168 days to the designated receiving warehouse in Tracy, California, with FOB origin terms and no variance allowed in quantity. The items must be packaged in compliance with ASTM D3951, with all packaging and labeling conforming to MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. Technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements supersede all other standards. The delivery must be completed by January 19, 2027, though the original required delivery date was November 2, 2026. Inspection and acceptance occur at the destination, and the unit price is $10.00 per unit for a total contract value of $100.00. The contract is managed by the Department of Defense’s Fluid Handling Division, with Rory O’Reilly listed as the primary point of contact. All documentation must align with DLA procedures, including transportation guidelines C19 and C20, and the unit of issue is strictly defined as each (EA).
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA Land At Aberdeen

Same awarding agency

NAICS: 333618
New
Federal
Market Survey for the procurement of NSN 2910-01-368-7644, 2910-01-373-2591, 2910-01-368-9883 (GOVERNOR, DIESEL ENG;) for TQG-Engine Fuel System Components.The Defense Logistics Agency-Aberdeen is conducting a market survey to identify capable sources for the procurement of three diesel engine governor parts—NSNs 2910-01-368-7644, 2910-01-368-9883, and 2910-01-373-2591—used in the Tactical Quiet Generator (TQG) fuel system. These governors are critical components supporting TQG diesel generator sets that provide reliable, low-noise electrical power for military operations in austere environments, including command posts, communications, and weapon systems. The government requires these parts for initial production with estimated quantities of 105, 7, and 7 units respectively, but does not hold the technical data package and has not procured these items since 2014, indicating a need to reestablish supply sources. Responses are requested from manufacturers or suppliers who can demonstrate the ability to produce or supply the specified governors, including their part numbers 8270-1002 and 664543C, with CAGE code 31361. Submitters must provide documentation on past performance, test results, technical drawings, data rights, and prior government or commercial contracts, along with their company name, CAGE code, and technical contact information. This notice is strictly for market research and planning purposes, with no commitment to award a contract or reimburse response costs. Responses are due by August 7, 2026, and must be submitted via email to the designated technical and small business contacts; no phone inquiries are accepted. The information gathered will assess industry capability, support acquisition strategy decisions, and determine potential for competitive or small business set-aside contracts.
Other Engine Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541380
New
Federal
Test Equipment and Quality Verification Support
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
Federal
Obsolescence Management & Engineering Support
Engineering Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
Federal
Optical Alignment Sleeve Supply
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332215
New
Federal
Precision Hand Tool Supply (Miniature Screwdriver & Needle-Nose Pliers)
Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339920
New
Federal
Fiber Optic Cleaning Kit Manufacturing and Assembly
Sporting and Athletic Goods Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
Federal
Sources Sought Announcement for Enhanced Position Location Reporting System (EPLRS) ComponentsThe Defense Logistics Agency-Aberdeen is conducting a sources sought announcement to identify qualified manufacturers capable of producing the battery case assembly part number A3159263, NSN 6160-01-348-2410, which supports the Enhanced Position Location Reporting System (EPLRS). This component houses the lithium-ion BA1372/U primary battery and is critical to the EPLRS’s secure, jam-resistant tactical communications capability. The Government possesses the full technical data package (TDP) for the part, including level 3 production information, and intends to release it to qualified respondents under strict controls due to its classification under International Traffic in Arms Regulations (ITAR). To access the TDP, potential suppliers must be active in the Defense Logistics Agency Joint Certification Program (JCP), hold an approved DD2345 form, submit a completed and signed Non-Disclosure Agreement, and provide verification of their CAGE code in the System for Award Management. The TDP release process requires submission of requests within seven days of the announcement posting to DLA.Aberdeen.SourcesSought@dla.mil, and the data custodian and NDA signatory must be the same individual. The Government is evaluating industry capability to determine whether this acquisition can be competed broadly or set aside for small businesses, with responses due by July 14, 2026, and must be submitted exclusively via email to Joseph W. Frye or Jacob Sparr. No phone inquiries are permitted. Respondents are required to include their company name, CAGE code, DUNS number, technical point of contact details, completed questionnaire, evidence of First Article Testing capabilities or results, and information on prior government contracts. This announcement is strictly for planning and market research and does not constitute a solicitation, request for proposal, or commitment to award a contract, nor will the Government reimburse any costs incurred in preparing responses.
Battery Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
New
Federal
Market Survey for Procurement of Spares in Support of the Secure Mobile Anti-Jam Reliable Tactical (SMART-T) Program.

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541690
Federal
Obsolescence Management & Sustainment SupportThe contract seeks comprehensive obsolescence mitigation strategies for the Induction Compass Transmitter, a critical component within defense systems, focusing on ensuring long-term operational viability amid aging hardware and supply chain challenges. Key requirements include identifying and qualifying alternative sources for components, implementing viable substitutions without compromising performance or interoperability, and developing robust life-cycle management plans that extend the system’s serviceable life. The contractor must establish sustainable sustainment pathways that address foreseeable obsolescence risks, maintain technical documentation, and coordinate with military stakeholders to ensure seamless integration and continued readiness. This subcontract, issued by the Department of Defense through DLA Land at Aberdeen Proving Ground, targets a specific technical domain vital to navigation and targeting systems, with performance centered at Aberdeen Proving Ground, Maryland. The solicitation is open for responses through July 29, 2026, under NAICS code 541690, which covers other scientific and technical consulting services. The effort demands deep expertise in defense electronics lifecycle management, supply chain resilience, and military system sustainment, requiring proven experience in navigating legacy defense hardware obsolescence while delivering solutions that meet stringent military standards and readiness requirements.
Other Scientific and Technical Consulting Services

POSTED

15 days ago

DEADLINE

in 5 days
View Details
NAICS: 541330
Federal
Technical Data Package (TDP) Development & Reverse Engineering ServicesThe contract requires the development of a complete Technical Data Package for the Induction Compass Transmitter, encompassing all necessary engineering drawings, bill of materials, test procedures, and manufacturing specifications. This effort is to be accomplished through reverse engineering or by leveraging existing documentation, ensuring the TDP meets all functional and technical requirements without reliance on original manufacturer data. The deliverables must support full reproduction, maintenance, and support of the system by third-party manufacturers or government entities. The work is solicited as a subcontract under the NAICS code 541330 for engineering services, with performance located at Aberdeen Proving Ground, Maryland, 21005. The opportunity was posted on July 9, 2026, and responses are due by July 29, 2026, with the contracting activity under the Department of Defense, specifically DLA Land At Aberdeen. No set-aside provisions are specified, and the task is focused on technical documentation and data integrity to enable long-term sustainment and interoperability of the Induction Compass Transmitter system.
Engineering Services

POSTED

15 days ago

DEADLINE

in 5 days
View Details
NAICS: 334519
Federal
Precision Electromechanical Component Manufacturing – Induction Compass TransmitterThe contract pertains to the manufacture or supply of the Induction Compass Transmitter, identified by NSN 6605-00-531-2992 and part number 664543C, a high-reliability electromechanical device critical to defense navigation systems. This component detects Earth’s magnetic flux and transmits precise data to a compass indicator, ensuring accurate directional sensing in military applications. The work is classified under NAICS code 334519, indicating it falls within the miscellaneous electronic component manufacturing sector, and is structured as a subcontract. Performance is required at Aberdeen Proving Ground, Maryland, with a zip code of 21005, and the contracting activity is managed by DLA Land At Aberdeen under the Department of Defense. The solicitation was posted on July 9, 2026, with a firm response deadline of July 29, 2026, at 9:00 PM Eastern Time. No set-aside type or special procurement preferences are specified, meaning the opportunity is open to all eligible subcontractors capable of meeting the technical and quality demands of this defense-critical component.
Other Measuring and Controlling Device Manufacturing

POSTED

15 days ago

DEADLINE

in 5 days
View Details
NAICS: 334511
Federal
Market Survey for the procurement of NSN 6605-00-531-2992 (T-611/ASN Induction Compass Transmitter) on the Gyroscope Displacement systemThe U.S. Department of Defense, through the Defense Logistics Agency-Aberdeen, is conducting a sources-sought announcement to identify potential suppliers capable of providing the Induction Compass Transmitter, NSN 6605-00-531-2992, which supports the Gyroscope Displacement system. This component functions as a transmitter that detects the earth’s magnetic line of flux and converts it into electrical signals for use by control systems or remote compass indicators. The Army estimates an initial production requirement of 56 units, though these quantities are subject to change and are not binding. The Government currently lacks the technical data package for this part and will not release any drawings or specifications. The item was last procured in September 2025 under delivery order SPRBL125F0149 for 20 units, with a CAGE code of 56232 and part number 664543C. Respondents are invited to voluntarily submit information demonstrating their ability to manufacture or supply this part or a substantially similar item, including documentation such as questionnaires, test results, prior government or commercial contract history, data rights, and other relevant performance data. Responses must include the company name, CAGE code, and a technical point of contact with email and telephone details. This announcement is not a solicitation, does not commit the Government to any award, and will not reimburse costs associated with preparing submissions. The Government intends to use the responses to assess market capability, determine competitiveness, and inform future acquisition strategy, including potential small business set-asides. All submissions are due by July 29, 2026, and must be sent via email to the designated technical and small business contacts; no phone inquiries will be accepted. Future procurement actions, if any, will be formally announced on SAM.gov.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

15 days ago

DEADLINE

in 5 days
View Details