Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on November 9, 2018. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

AIR COUNTERMEASURE IR AND RF DEVICES

Closed
N0016419SNB19Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
W6QK Acc-Ri-Picatinny

POSTED

5 days ago

DEADLINE

in 10 days
NAICS: 332993
DIBBS
49--TEST STAND,TORPEDO,WAR
Solicitation # SPE7M4-27-T-1136
Solicitation SPE7M4-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for 32 torpedo warshot test stands, identified by NSN 4921017264731. This procurement is a total small business set-aside under NAICS code 332993. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The required delivery period is 164 days, with a need ship date of April 6, 2027, and an original required delivery date of October 15, 2027. Shipping is designated as FOB Origin, with the final delivery destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for general packaging, RP001 for palletization, and MIL-STD-129 for labeling. Inspection and acceptance will occur at the destination. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and must disclose any use of non-domestic materials. Additionally, the contract incorporates various federal and defense acquisition regulations regarding hazardous materials, cybersecurity, and the prohibition of certain foreign military company items. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

8 days ago

DEADLINE

in 2 days
NAICS: 332993
Federal
ARMY AMMUNITION MANUFACTURING INNOVATION INDUSTRIAL BASE INTEGRATION TEAM COMMERCIAL SOLUTIONS OPENING REQUEST FOR SOLUTIONS
Solicitation # AMIP-CSO
The Army Ammunition Manufacturing Innovation Industrial Base Integration Team is soliciting innovative commercial solutions through a Commercial Solutions Opening to modernize and enhance ammunition manufacturing capabilities. The program focuses on integrating advanced technologies such as additive manufacturing, robotics, artificial intelligence, and digital twins to create a more agile and resilient industrial base. Key objectives include accelerating digital transformation via IoT platforms and advanced analytics, improving supply chain resilience, enhancing workforce capabilities, and promoting sustainable manufacturing practices, all while maintaining strict compliance with DoD cybersecurity and readiness standards. Managed by the Joint Program Executive Office for Armaments and Ammunition, the solicitation allows for awards via fixed-price contracts or Other Transaction Agreements. The selection process is phased, beginning with the continuous acceptance of unclassified Phase I white papers and PowerPoint briefings, followed by Phase II pitch sessions, and concluding with detailed Phase III technical and price proposals. Evaluation is based on a peer or scientific review focusing on return on investment, technical merit, availability of funds, and private investment. Successful efforts are intended for funding in Fiscal Year 2026, with typical periods of performance ranging from two to five years. Large business offerors are required to submit comprehensive subcontracting plans targeting various small business categories.
W6QK Acc-Ri

POSTED

20 days ago

DEADLINE

in about 2 months

General Info

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

IN

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Office AddressCRANE, IN, 47522-5001, USA

Full Description

Show more
N00164-19-S-NB19 - SOURCES SOUGHT - AIR COUNTERMEASURE IR AND RF DEVICES - PSC 1370 - NAICS 332993 Sources Sought for Pyrotechnic, Pyrophoric, and/or Decoy Devices MARKET RESEARCH - SOURCES SOUGHT: NSWC Crane is issuing this Sources Sought for determining industry capabilities and is soliciting information from potential sources. The Government is conducting market research related to fabrication of pyrotechnic and /or Pyrophoric Decoy Devices for initial design assessment, Effectiveness Flight Testing, Hazard, Safety & Qualification Testing resulting in improved capability in protecting military aircraft from Man Portable Air Defense Systems (MANPADS). This notice is for market research purposes only and does NOT constitute a Request for Proposal. This notice shall not be construed as a contract, a promise to contract, or as a commitment of any kind by the Government. The Government is NOT seeking or accepting unsolicited proposals. This Sources Sought Notice is issued solely for conducting market research in accordance with FAR Part 10 and gathering information for planning purposes. NSWC Crane is seeking companies with existing non-developmental countermeasure decoys to counter some of the emerging IR threats. The countermeasures are required to: produce a multispectral signature, dispensed at pre-defined intervals; produce a multi-spectral signature that combines IR output with blocking properties; generate a pre-defined interval dispense that produces IR output with blocking properties; utilize a single dispense with the ability to dispense multiple materials or material configurations that react and appear differently depending on their functional purpose. Additionally, decoys designed with the following properties are sought: advanced Chaff devices for radar countermeasure, Thrusted MTV: Aerodynamic with Low FOD (Falling Ordnance Debris) and nose weight for enhanced trajectory: aerodynamic with classic (solid) nose weight for enhanced trajectory or aerodynamic flight properties: and decoys with smart dispenser capability. Form Factors 1" X 1" X 8" 1" X 2" X 8" 1.41732" X 6" SUBMISSION OF RESPONSES: NAVSEA will accept only electronic unclassified submission of responses. Whitepaper responses are due 45 calendar days from the date of this posting to Tommy Sanders at the tommy.sanders@navy.mil. All responses shall be unclassified and shall be submitted by 11:00 a.m. local time on 12/21/2018. Capabilities: Interested companies who have the necessary capabilities should respond by providing the Government the following information: (1) Name of company and CAGE Code and DUNS number; (2) Point of Contacts name, telephone number, and E-mail address; (3) Company address; (4) Business size information; (5) A brief summary of possible partnering/teaming arrangements; (6) Identify if the company is a Joint Venture, as defined in FAR 19.101 (7) (i). If a respondent does not have adequate resources (technical, manufacturing, personnel, etc.) available, the respondent must be able to demonstrate the ability to obtain those resources, and provide the timeframe for obtaining. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must also meet these criteria. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements; (7) A brief summary of the company's capabilities (to include organizations, description of facilities, equipment, manufacturing process, inspection capability, skills, personnel) and potential subcontractor's capabilities; (8) Estimated maximum monthly production capacity (and if manufacturing resources required to produce this item are shared by other items/production lines); (9) Lead time to successfully conduct/complete a First Article Acceptance Test (FAAT) and first production delivery after award. Disclaimer: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A PRE-SOLICITATION NOTICE OR A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT AND THE GOVERNMENT WILL NOT PAY FOR ANY INFORMATION SUBMITTED UNDER THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. DO NOT SUBMIT CLASSIFIED MATERIAL. ALL DATA RECEIVED IN RESPONSE TO THIS SOURCES SOUGHT NOTICE THAT IS MARKED OR DESIGNATED AS CORPORATE OR PROPRIETARY WILL BE FULL PROTECTED FROM RELEASE OUTSIDE THE GOVERNMENT. IF A FORMAL SOLICITATION IS GENERATED AT A LATER DATE, A SOLICITATION NOTICE WILL BE PUBLISHED. ALL PROSPECTIVE CONTRACTORS INTERESTED IN THE POTENTIAL FUTURE SOLICITATION FOR THIS ITEM MUST BE REGISTERED VIA THE SYSTEM FOR AWARD MANAGEMENT (SAM) DATABASE AT WWW.SAM.GOV. Contracting Office Address: BLDG 121 300 Hwy 361 Crane, IN 47522-5001 United States Primary Point of Contact.: Joseph M Johnson Contract Specialist joseph.m.johnson5@navy.mil

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 811310
New
Federal
EVALUATION/REPAIRS
Solicitation # N00016427Q0006
Solicitation N00164-27-Q-0006 is a sole source, firm fixed price procurement issued by the Naval Surface Warfare Center Crane Division for engineering services to support five AN/SLQ-32(V)4 G4DSP-XD3 multiprocessor cards. The primary objective is to perform evaluation diagnostics, failure analysis, and data extraction on non-working processing units to determine if they are repairable or beyond economic repair. Key technical requirements include salvaging Northrop Grumman running scripts and operational binary scripts from non-volatile memory, as well as mapping hardcoded IP schemes and network connection profiles. The government intends to negotiate exclusively with Abaco Systems due to the items being peculiar to one manufacturer, although other responsible sources may submit capability statements for consideration. The contract requires strict adherence to MIL-STD-129 for shipping and marking, NIST SP 800-88 Rev. 1 for media sanitization, and DoDI 8582.01 for the security of non-DoD information systems. Contractors must be registered in the System for Award Management and comply with Cybersecurity Maturity Model Certification (CMMC) requirements under DFARS 252.204-7021. Deliverables include software test reports, computer software products, and system security plans. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system. Offers are due by 4:00 PM Eastern Time on October 26, 2026, and should be submitted electronically to the primary point of contact, Trista Ray.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS