This Government Contract opportunity from Florida was posted on May 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Air Drum Wheel End Training System Supply

Closed

State & Local

Submission Closed06/01/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333111

New

International

New Ryetec Contractor Flail Mower Collector C2200CHS Super

Solicitation # ocds-h6vhtk-06f86e

Natural England is procuring a new Ryetec Contractor Flail Mower Collector C2200CHS Super, with an estimated value of 30,000 pounds excluding VAT. The equipment must include a PTO shaft and guard, a front feeder plate, and a volume reduction bar, and it must be fully compatible with a Valtra N135EA tractor. The contract encompasses the supply, delivery, installation, commissioning, and operator familiarisation at Arne Farm in Wareham, Dorset, with a delivery deadline on or before December 11, 2026. The supplier is also required to provide ongoing servicing, warranty support, maintenance, spare parts, and technical assistance, while ensuring the machinery complies with all current UK health and safety legislation and standards. The contract will be awarded based on the most advantageous tender, using a weighted scoring system consisting of 60 percent technical evaluation and 40 percent commercial cost. Technical criteria focus on supply capability, delivery, support services, and health and safety compliance. The agreement includes a contractor liability cap of 5 million pounds and requires strict adherence to the General Data Protection Regulations 2018. The procurement process is reserved for UK suppliers, with a particular suitability for SMEs, and requires bidders to certify they are free from mandatory exclusion grounds.

POSTED

DEADLINE

Orchard Air-Blast Sprayer Supplier

Csa Intermountain 1 Usda-Fs

POSTED

DEADLINE

Orchard Air-Blast Sprayer, Pecan Breeding & Genetics Program, ARS Facility, USDA

Solicitation # 1284LL26Q0108

Solicitation 1284LL26Q0108 is a combined synopsis and request for quotation for the procurement of one new, fully assembled Orchard Air-Blast Sprayer for the USDA Pecan Breeding and Genetics Program. The equipment will be used exclusively in pecan orchards at the USDA ARS facility in Early, Texas. This is a total small business set-aside under NAICS code 333111, with a size standard of 1,250 employees. The anticipated contract is a firm-fixed-price purchase order, with delivery required FOB Destination to the Texas facility within 60 days after receipt of the order. The sprayer must meet specific technical requirements, including a minimum 1000-gallon capacity, preferably with a fiberglass tank, and a turbo pump with at least 1000 RPM. It must be PTO powered and compatible with a John Deere 5130 ML tractor, featuring at least 12 sprayer nozzles, on/off controls accessible from the tractor seat, and high flotation tires, preferably 10-ply. A minimum one-year warranty is required. Award will be based on the best value to the government, evaluating price, product acceptability via a product sheet, warranty information, the earliest delivery date, and relevant past performance from the last three years. Quotations must be submitted electronically to the designated contracting personnel by September 21, 2026. Invoicing will be managed through the Invoice Processing Platform, and payment will be made via Electronic Funds Transfer.

Csa Intermountain 1 Usda-Fs

POSTED

DEADLINE

Moxee Farm utility tractor

Solicitation # 1232SA26Q1499

Solicitation 1232SA26Q1498 is a combined synopsis and request for quotation issued by the USDA Agricultural Research Service to procure a new replacement utility/mower tractor for the research laboratory at Moxee Farm in Wapato, Washington. The requirement is a small business set-aside under NAICS code 333111, with a size standard of 1,250 employees. The objective is to replace a 2004 Massey Ferguson 431, which the government will offer as a trade-in. The new tractor must feature a minimum 50 HP engine, 4WD or front-wheel assist, a shuttle-type transmission, a 540-RPM rear PTO, and an open operator station in a loader-ready configuration. Examples of compatible models include the New Holland WM50, John Deere 4066R, and Massey Ferguson 2850E. The contract will be awarded as a single firm fixed-price purchase order based on best value, utilizing a comparative evaluation of technical approach, price, and past performance. All deliverables must be shipped F.O.B. destination to the Moxee, Washington facility within 90 days of award. Responsive offerors must provide a detailed technical approach, a completed supplemental quote submission form, and certification of compliance with federal anti-discrimination laws and DEI regulations. Quotations must be submitted by September 21, 2026, and prices must remain firm for 90 calendar days.

POSTED

DEADLINE

Portable Frost Protection Wind Machine w/Propane Burners

Solicitation # 12SAD226Q0007

Solicitation 12SAD226Q0007 is a combined synopsis and request for quotation issued by the USDA Rural Development Procurement Management Office for the procurement of three new, fully operational portable frost protection wind machines with propane burners. The requirement specifically mandates the AgroFrost FrostBuster 252 model (Part Number FrostBuster F252) to be used for yield preservation in research orchards, vineyards, and greenhouses at the Appalachian Fruit Research Station in Kearneysville, West Virginia. The acquisition is unrestricted and open to all responsible sources under NAICS code 333111. The contract is a Firm-Fixed Price award using the Lowest Price, Technically Acceptable (LPTA) method. Technical acceptability requires the provision of new equipment from the Original Equipment Manufacturer or an approved source, with a strict prohibition on alternate or equal products. The period of performance is from September 28, 2026, to November 27, 2026, with all items required for delivery within 60 days of award. Quotations must be submitted by September 24, 2026, and must include pricing for the machines and shipping, as well as supporting manufacturer documentation to verify the exact model requested.

Usda/rd/strategic Acquisition Division 2

POSTED

DEADLINE

01913-270003 Agricultural Rotary Cutter

Solicitation # WS5788843821

The Government of Canada, through the Department of Public Works and Government Services, is soliciting offers for the procurement and delivery of one agricultural rotary cutter for the Agriculture and Agri-Food Canada research farm located in Harrington, Prince Edward Island. All equipment must be delivered by March 31, 2027. This opportunity is open exclusively to Canadian suppliers and is conditionally limited to Canadian goods. Interested parties must submit their responses by the deadline of September 16, 2026. The procurement is categorized under NAICS code 333111 and is managed by the primary contracting authority, Maryse Cyr.

Department of Public Works and Government Services

POSTED

DEADLINE

01913-261023-B Small Plot Fertilizer Spreader

Solicitation # WS5694507367

Agriculture and Agri-Food Canada's Charlottetown Research and Development Center is seeking the supply and delivery of one small plot fertilizer spreader. This solicitation, numbered WS5694507367, is open exclusively to Canadian suppliers and is a reissue that cancels and supersedes the previous solicitation from May 14, 2026. The response deadline is September 23, 2026, at 19:00 UTC, with the place of performance located in Prince Edward Island. Offerors who participated in the previous solicitation may request a debriefing or feedback session, and all current bidders may request a debriefing on the results of the process.

Department of Public Works and Government Services

POSTED

DEADLINE

Telehandler Equipment Supplier

St. Lawrence Parks Commission

POSTED

DEADLINE

Supply of Transmission Converter Housings (NSN 2520013610592)

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supplier of Electrical-Electronic Component Oven

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Farm Machinery Planter

Solicitation # 12319826Q5018

The USDA Food and Nutrition Administration, on behalf of the Agricultural Research Service, is soliciting quotes for the acquisition of a high-capacity farm machinery planter to support soil research in Brookings, South Dakota. The requirement is for a John Deere 1745 Planter or an equal product that meets specific technical requirements, including mechanical transmission seed drive, 1.6 bushel seed hoppers, and two 150-gallon liquid fertilizer tanks with piston pumps and single disk openers. The contract is a 100 percent small business set-aside under NAICS code 333111 and will be awarded as a firm-fixed-price purchase order based on the lowest priced technically acceptable offer. The scope of work includes the delivery and assembly of the new planter at no additional cost, as well as the appraisal and trade-in of an existing 1989 John Deere 7200 Planter. Awardees must provide a one-year warranty and a manufacturer's certificate of origin for the equipment. Proposals must be submitted in two separate volumes, technical and price, by September 14, 2026. The contractor is required to be active in the System for Award Management and must comply with all applicable OSHA regulations and federal anti-discrimination laws.

USDA Food And Nutrition Administration

POSTED

DEADLINE

SPRAYER, PESTICIDE, S

Solicitation # SPE4A0-26-T-4757

This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4757, is for the procurement of one skid-mounted pesticide sprayer. The required equipment is identified as part number DYNAJET L-30, manufactured by Curtis Dyna-Fog Ltd under CAGE code 82254, with NSN 3740-01-495-0914. The contractor is required to provide one unit along with a comprehensive manufacturer's commercial manual covering operation, services, maintenance, and repair. The contract falls under NAICS code 333111 and specifies a delivery timeline of five days after receipt of order, with the place of performance located at Camp Pendleton, California. Key compliance requirements include adherence to DLA packaging standards and the removal of government identification from any non-accepted supplies. Item Unique Identification is not required per the service customer's request. The solicitation was posted on September 9, 2026, with a response deadline of September 17, 2026, and is subject to the DLA Master List of Technical and Quality Requirements.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 5 days

AI Contract Overview

The contract entails the supply of an air drum wheel end training system specifically designed with cutaway components to facilitate instructional visualization. This training system aims to provide a hands-on educational tool to better understand the workings of air drum wheel ends, enhancing practical learning and technical comprehension. The procurement is structured as a subcontract under the NAICS code 333111, which typically relates to manufacturing machinery and equipment. The solicitation was posted on May 27, 2026, with a response deadline set for June 1, 2026. The contracting agency is identified as LAM - Fleet in Florida, suggesting the training system will be used within a fleet maintenance or training program. While specific details such as location of performance, organization type, or set-aside status are not indicated, the emphasis is on obtaining a specialized, instructional device that supports training needs related to air drum wheel ends.

General Info

Supply of air drum wheel end training system with cutaway parts for instructional use.

Agency

Florida → LAM - FleetView Agency

NAICS

333111 - Farm Machinery and Equipment ManufacturingView NAICS

Place of Performance

FL, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-X-01261.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Intent to Single Source for Consulab Air Brake Training Equipment

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 27

subcontract

Response DeadlineJun 1

Deadline has passed

Submission Closed

06/01/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyFlorida → LAM - Fleet

ContactsNo contacts available

OfficeN/A

Organization / Agency

Florida → LAM - Fleet

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of an air drum wheel end training system with cutaway components for instructional visualization.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS