This Subcontract opportunity from Government of Canada was posted on April 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Air Monitoring System (AMS) Hardware Design & Production

Closed

International

Submission Closed07/03/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334510

New

SLED

Portable Emissions Measurement System (PEMS) Equipment SupplierThis subcontract involves the supply of Portable Emissions Measurement System (PEMS) equipment for prime contractors working on California Air Resources Board projects. The selected supplier is responsible for the manufacture and delivery of gas PEMS units that strictly adhere to 1065 compliance specifications. Each unit must be provided with all necessary connections, cables, and sample heated lines measuring at least five meters in length. The opportunity is categorized under NAICS code 334510 and is associated with the State Air Resources Board in California. Interested parties must submit their responses by the deadline of November 24, 2026, to be considered for the provision of this specialized hardware and associated cabling.

State Air Resources Board

POSTED

DEADLINE

Electronic Component Repair and Modification ServicesThis subcontract for Electronic Component Repair and Modification Services involves the teardown, evaluation, repair, and modification of electronic components under NSN 5998-01-625-2221 for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work requires the execution of test, diagnostic, and evaluation procedures within 180 days of receipt, with all repairs performed in accordance with TDP Version 005. To ensure quality and safety for submarine and surface ship applications, the contractor must maintain mercury-free compliance and operate within ESD-protected work areas that adhere to ANSI/ESD S20.20 standards. The final deliverable consists of the repaired and modified electronic components. This opportunity falls under NAICS code 334510 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

6515-- NX EQ Ultrasonic Aspirator System: Tissue Ablation (VA-27-00010132)

Solicitation # 36C10X27R0005

Solicitation 36C10X27R0005 is a combined synopsis and request for proposal issued by the Department of Veterans Affairs for the procurement of an NX EQ Ultrasonic Aspirator System for tissue ablation and related accessories. This requirements contract is specifically set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 334510. The government requires new OEM equipment only, explicitly prohibiting refurbished, remanufactured, or gray market items. All products must meet the salient characteristics detailed in the product description to be eligible for award, with a particular focus on design capabilities, patient safety features, and the provision of a variety of handpieces and accessories such as footswitches and cleaning kits. The award will be based on the best value to the government, with evaluation factors prioritized as Technical, Past Performance, and Price, in that order. Non-price factors are significantly more important than price. Technical evaluations will focus on design, ease of use, safety, and training support, while past performance will be assessed based on recency and relevance within the last three years. Delivery is FOB Destination to various VHA locations, and the contractor must provide order confirmation within four working days. Proposals must be submitted in four distinct volumes: Technical, Past Performance, Price, and Offer/Representations, adhering to specific file naming and formatting guidelines.

Sac Frederick (36C10X)

POSTED

DEADLINE

Automated Ultrasound-Based, Super Intelligence (SI)-Enabled Fracture Detection

Solicitation # BARDA-FY27-10192026

The Center for Biomedical Advanced Research and Development Authority (BARDA) has issued Sources Sought Notice BARDA-FY27-10192026 to conduct market research for innovative medical countermeasure technologies. The agency is seeking information on standalone, point-of-care ultrasound devices enabled by Super Intelligence (SI) and machine learning to facilitate the rapid triage and detection of musculoskeletal injuries, such as fractures and soft tissue damage, in emergency, urgent care, and austere field settings. This effort supports national preparedness for mass casualty events, including those resulting from nuclear blasts or structural collapses, where traditional radiography and CT imaging are unavailable. BARDA is interested in technologies capable of automated volumetric capture, 3D-rotatable model reconstruction, and the ability to distinguish various fracture types and edema. Desirable characteristics include a ruggedized, portable form factor with integrated SI processing, long battery life, and interoperability with electronic health record systems. The agency is exploring various acquisition strategies, including direct purchase, leasing, or vendor-managed inventory arrangements. Interested small businesses and other concerns must submit their capabilities via a specific response form, including separate technical and business representations not exceeding 10 pages each. Submissions must be sent in Microsoft Office or Adobe Acrobat format to the designated points of contact by 1:00 p.m. Eastern Time on November 18, 2026. This notice is for planning purposes only and does not constitute a solicitation or a commitment to award a contract.

Barda - Aspr / Daappo / Barda Dcma

POSTED

DEADLINE

Special Scale Meter SupplierThis subcontract involves the manufacture or procurement of a specialized scale meter, identified by NSN 6625-01-541-0593, to support prime contractors for the DLA Weapons Support Maritime Supply Chain. The selected supplier is responsible for delivering one unit of the equipment to the DLA Distribution facility located in New Cumberland, Pennsylvania. The contractor must ensure all items are packaged and marked in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Additionally, the supplier is required to provide all necessary hazard warning labels and Material Safety Data Sheets as mandated by 29 CFR 1910.1200 where applicable.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Self-Indicating Bimetallic ThermometersThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves the supply of 24 self-indicating bimetallic thermometers for prime contractors. The scope of work includes the manufacture or sourcing of bimetallic sensing elements and self-indicating display mechanisms, with a requirement to provide samples for First Article Testing. Performance will take place in New Cumberland, Pennsylvania. The contractor must ensure that all hazardous materials are labeled in strict accordance with the Hazard Communication Standard 29 CFR 1910.1200. This procurement falls under NAICS code 334510, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Roll and Pitch Sensor SupplierThis subcontract involves the supply of six Roll and Pitch Sensors for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing NSN 2090015752664, ensuring full conformity with Basic Drawing NR 53711 8431122 Revision NR F and TDP Rev A Gen 1. Due to the nature of the components as Critical Application Items, the contractor must perform rigorous quality control and adhere to strict cybersecurity standards outlined in NIST SP 800-171. Logistical requirements include compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The project falls under NAICS code 334510, with the place of performance located in New Cumberland. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOLDER SET, DENTAL RADI

Solicitation # SPE2DH-27-T-0461

Solicitation SPE2DH-27-T-0461 is a small business set-aside procurement issued by the DLA Troop Support Medical Supply Chain FSH for the acquisition of two dental radiographic film exposure holder sets. These sets are specifically designed for RVG sensors 5200, 6100, and 6200 and include a bundle of four paddle holder types: horizontal bitewing, vertical bitewing, horizontal PA, and vertical PA. The equipment is intended to be held by the patient to ensure accurate sensor positioning for high-quality intraoral imaging. Delivery is required by November 10, 2026, to the Naval Hospital in Twentynine Palms, California, with a delivery timeline of five days after receipt of order. The contract mandates strict adherence to DLA technical and quality requirements, including commercial packaging and marking in accordance with Medical Marking Standard No. 1. It incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and combating trafficking in persons. Invoicing must be processed electronically via the Wide Area Workflow system. Offerors are encouraged to submit quotes through DIBBS and must provide complete technical data for any alternate product offers. The procurement is governed by NAICS code 334510 and prohibits the use of additive manufacturing unless specifically authorized.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Carbon Monoxide Indicator SupplyThis subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the supply of 3,000 carbon monoxide detection indicators. The specific requirement is for NSN 6665-01-724-2911, corresponding to RKI Instruments part number 65-2646RKS-SW. All items must be packaged according to FED-STD-313/TQ IP025 for hazardous materials or ASTM D3951 for non-hazardous materials, with labeling and palletization adhering to MIL-STD-129 and RP001 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334510, with the place of performance located in Tracy, California. Interested parties must respond by November 16, 2026, to provide these essential indicators to prime contractors supporting the maritime supply chain.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Self-Indicating ThermometersThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the procurement and delivery of 13 self-indicating thermometers. The specific items are identified by NSN 6685016277424 and Champion Industries Inc. DBA 11520 P/N 113622. All units must be delivered to New Cumberland by April 7, 2027. To be eligible for this contract, providers must be registered and validated in the System for Award Management. The opportunity falls under NAICS code 334511 and was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Dial Indicating Differential GagesThis subcontract involves the supply of Dial Indicating Differential Gages for prime contractors supporting DLA Weapons Support ASC projects. The provider must deliver two accepted gages to DLA Distribution San Joaquin in Tracy, ensuring all hardware meets NSN 6685014520570 specifications. All components and packaging materials are required to be mercury-free. Quality control must be maintained through sampling and inspection conducted per MIL-STD-1916 or ASQ H1331. Additionally, the contractor is responsible for executing packaging according to MIL-STD-2073-1E and marking delicate instruments in compliance with MIL-STD-129. The project falls under NAICS code 334510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Time Totalizing Meters (NSN 6645-01-616-7473)This subcontract involves the procurement and delivery of nine time totalizing meters, identified by NSN 6645-01-616-7473, for prime contractors supporting the DLA Weapons Support ASC Commodities Division under the Department of Defense. The scope of work requires the supplier to provide hardware that meets strict military specifications, specifically adhering to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the equipment, the items must be handled as delicate instruments under Special Marking Code 05, utilizing specialized protective packaging to ensure no damage occurs during transit. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 334510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 4 days

AI Contract Overview

The contract involves the full lifecycle development and manufacturing of the Air Monitoring System (AMS) hardware, specifically including the First Article System (FAS) and Follow-On Shipset (FOS) for deployment on Victoria-class submarines. Issued by the Department of National Defence of the Government of Canada, the work is to be performed in Victoria and Halifax. The contract is categorized under NAICS code 334510, which pertains to the manufacturing of electromagnetic equipment, indicating a focus on hardware design and production related to air monitoring capabilities. This subcontract requires comprehensive development services from initial design through to production, emphasizing quality and integration within submarine operations. The solicitation was posted on April 2, 2026, with a response deadline of July 3, 2026, giving potential contractors a three-month window to prepare proposals. The scope of work supports Canada’s naval capabilities by enhancing environmental monitoring aboard Victoria-class submarines, ensuring improved operational safety and environmental compliance during deployments.

General Info

Development and manufacturing of AMS hardware for Victoria-class submarines by Canadian Department of National Defence.

Agency

Government of Canada → Department of National Defence

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

Victoria, Halifax, CAN

Set-Aside

NONE

Documents

This scope was carved out of W8472-265965A.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Air Monitoring System for the Victoria-Class Submarines

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedApr 2

subcontract

Response DeadlineJul 3

Deadline has passed

Submission Closed

07/03/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Full lifecycle development and manufacturing of the First Article System (FAS) and Follow-On Shipset (FOS) for deployment on Victoria-class submarines.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Air Monitoring System (AMS) Hardware Design & Production

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Government of Canada → Department of National Defence

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open